[pre-release] macOS Tahoe

[SavageAUS]

 
[mention=1390874]Anto65[/mention] Is it possible to apply root patch from actual OCLP version (for modern wireless) despite Tahoe version is not yet there.
 
Sorry for my bad English.

I have tried without luck as that is all my AMD rig needs (wifi).


Sent from my iPhone using Tapatalk

[nmano]

Disable Intel wifi and bluetooth try this SSDT If anyone like try Broadcom wifi

 

 

 

SSDT-RP01-Disable-intel-wifi-bluetooth.aml

[robi62]

5 minutes ago, nmano said:

Disable Intel wifi and bluetooth try this SSDT If anyone like try Broadcom wifi

 

 

 

SSDT-RP01-Disable-intel-wifi-bluetooth.aml 149 B · 1 download

sorry but for Broadcom wifi we need OCPL to patch it....

[taranta babu]

4 hours ago, Anto65 said:

As far as I know, OCLP is not ready yet and I can't even try, if you want to try 😁

I've tried 😁

[Luchina]

For those who want, the recoveries of the Tahoe Beta 1 and 2

 

https://hackintosh.one/s/recovery-tahoe-beta-1

https://hackintosh.one/s/recovery-tahoe-beta-2

 

It is ideal for those who want to create a new EFI, from Windows or Linux, and want to install macOS directly from Apple's servers.

[naiclub]

1 hour ago, gsxb said:

ในที่สุดทุกอย่างก็ทำงานได้ ยกเว้นเสียงและ wifi 

อีเธอร์เน็ตยังใช้ได้ดีในตอนนี้ 

Please give me how to do it
EFI too. Thank you.

[Luchina]

A rather peculiar setup, but it worked well with Beta 2.

• Erying M-ATX, i5 1340P (13th gen) (ES CPU/Engineer Sample)
• Radeon RX 580 8Gb Asus (via PCIe adapter, because this setup does not have a PCIe 16x slot because it is an engineering CPU).
• WiFi/BT BCM94360NG (not working in Tahoe)
• NVME Kingston NV2 1TB

- Without WiFi (BCM) only.
- Clean installation, with full installer (Tested also with online recovery and success).
- Whatevergreen enabled for get a 120Hz with RX 5580.
- Opencore and kexts updated to the latest commits available in Dortania Builds

 

[MaLd0n]

3 hours ago, MorenoAv said:

 @MaLd0n can I share it here?

All is free and have topic here too with these folders

9 hours ago, surenmunoo said:

So that will report SSD as AppleSSD like below screenshot?

U can add a simple patch in Device Properties for NVME

Quote

<key>PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)</key>
            <dict>
                <key>device-id</key>
                <data>BqgAAA==</data>
                <key>vendor-id</key>
                <data>TRQAAA==</data>
                <key>built-in</key>
                <data>AQAAAA==</data>
            </dict>

For SATA serie 12

Quote

<key>PciRoot(0x0)/Pci(0x17,0x0)</key>
            <dict>               
                <key>compatible</key>
                <string>pci8086,a182</string>
            </dict>

[surenmunoo]

3 hours ago, eSaF said:

Don't worry I cracked the mystery in my own way.

As it turned out it is as Simple as I can make it.

 

 

He hasn't replied so I don't know if he was being genuine in his statement.

Anyway sorry I took so long I had to insure this worked and happy to say it did.

 

Follow these instructions carefully.

1. From a working Mac installation prepare a USB Installer Drive with Tahoe Beta 2 for a clean install.

2. When that is complete, reboot into the BIOS and change the Graphics Settings from PEG to IGU (From your RX Card to the CPU Graphics).

    Save the settings and switch the P/C off by the Power Cable.

3. Remove the Display Cable from the RX580 Card and plug it into the CPU Display Port back of the P/C.

4. Now reboot the machine with the USB Installation Drive plugged in and boot off it.

5. The Installation will now start and go all the way through, at every reboot do not rely on the machine to constantly boot from the USB during the process, you should insure that it is

    by hitting the apropiate key on the keyboard.

6. At the End you will be greeted at the Language Screen, just go through the setup process as normal. Do not copy USB EFI to the EFI Partition of the destination Drive.

7. You can now remove the Install USB, we won't need it again

 

THE PROCESS TO BOOT FROM THE RX580.

 

1. Now that we have the install on the desired Drive in the P/C we will now get the RX580 Card into play.

2. Go into the BIOS and change the Graphics Settings from IGP back to PEG and save the setting.

3. Switch off the machine from the Power cord. Remove The Display Cable from the CPU Display Port and Plug it into the Display Port of the RX580 Card.

4.We can now boot up the machine off your normal EFI Folder that you use to boot your other Mac OS with that uses the RX580 Card and that is it.

 

PS - I forgot to say clean the NvRAM before booting into the new Installation.

        Good luck.

 

 

EFI.zip 21.62 MB · 17 downloads

Have to find tricks to get this work some way or another 

11 minutes ago, MaLd0n said:

All is free and have topic here too with these folders

U can add a simple patch in Device Properties for NVME

For SATA serie 12

Thanks Chief, much appreciated. 

[mick3lson]

19 hours ago, Max.1974 said:

 

@Mick3lson 

 

Maybe you should try this  :

 

 

 

 

I finally managed clean install, I had to disable WhateverGreen.kext and replace it with NootRX.kext to boot with pendrive. All peripherals work except obviously wifi, the system is very stable and fast, in the next few days I will try to install other software to better test it. Thanks @Max.1974 for your EFI.

 

[Sergey_Galan]

3 hours ago, eSaF said:

I can clearly see LCD in yours but not in mine.

Will have to investigate further or will it be described as something else?

Maybe your cable is not connected to the video card?
Here's what I had to change for a clean install:
1. Disabled the integrated video core in BIOS.
2. Disabled WEG in the configuration.
3. Registered a named framebuffer in DeviceProperties
4. Changed the Mac model to MacPro7,1

 

[FirstCustomac]

7 hours ago, eSaF said:

I am using a SmBIOS that is included in supported models so that should not be a problem.

Toggling WEG on and off defeats what my intention is, which is to make the process as simple as possible.

 

I already have Tahoe running RX580 in Beta2 but had to do it via Beta1.

My intention was to see if I could clean install Beta2 with the RX Card online instead of going with the CPU Graphics.

 

Hi, @eSaF 

 

Is your system able to boot without WhateverGreen and get screen on RX 580 when connected via HDMI port?

[strangeron]

1 hour ago, MaLd0n said:

All is free and have topic here too with these folders

@MaLd0n Thank you very much. With the KabyLake EFI folder you shared, I was able to access the installation page on the RX590 without any errors. Previously, I could only install with the internal graphics.

[FirstCustomac]

5 minutes ago, eSaF said:

My RX580 is connected by Display Port and WEG is enabled.

The EFI attached with instructions a few pages back is how I managed and ran the installation.

I see. For my case, Displayport outputs no signal without WEG but HDMI port works fine without WhateverGreen.

[Max.1974]

2 hours ago, mick3lson said:

I finally managed clean install, I had to disable WhateverGreen.kext and replace it with NootRX.kext to boot with pendrive. All peripherals work except obviously wifi, the system is very stable and fast, in the next few days I will try to install other software to better test it. Thanks @Max.1974 for your EFI.

 

Enjoy my friend, this is the Spirit of Hackintosh since to begin !!!! 

 

News is coming about USBports to get all velocities soon 

 

And USBMaps of course !! 

[surenmunoo]

Anyone using Intel Wifi on Tahoe? or a netgear USB dongle to get wifi working till OCLP team provide a fix. 

[Takiller]

4 minutes ago, surenmunoo said:

Anyone using Intel Wifi on Tahoe? or a netgear USB dongle to get wifi working till OCLP team provide a fix. 

Yes, intel wifi via heliport + itwl 😁

[Max.1974]

Hi Guys, Hackintosh and Beyond Team get new USBmap and USBport configuration to working fine in macOs Tahoe 26 Beta 2 

 

Coming soon today on Youtube channel !!! 

 

 

Thanks to @CorpNewt Team 

 

 

2 hours ago, mick3lson said:

I finally managed clean install, I had to disable WhateverGreen.kext and replace it with NootRX.kext to boot with pendrive. All peripherals work except obviously wifi, the system is very stable and fast, in the next few days I will try to install other software to better test it. Thanks @Max.1974 for your EFI.

 

 

 

Hi @mick3lson now I wish class about how get NootRX.kext working with my Clover, because I compile new kexts from RehabMan project and works on Tahoe, just black screen is the problem  

 

 

[MaLd0n]

2 hours ago, strangeron said:

@MaLd0n Thank you very much. With the KabyLake EFI folder you shared, I was able to access the installation page on the RX590 without any errors. Previously, I could only install with the internal graphics.

Good to know  

[strangeron]

12 minutes ago, Max.1974 said:

I wish class about how get NootRX.kext working with my Clover

We just got an RX6800 running with NootRX and agdpmod=pikera that was getting the error /System/Library/KernelCollections/BaseSystemKernelExtensions.kc with WEG. Somehow NootRX, which we know was created from WEG, resolves it.

[MorenoAv]

Well thank you @MaLd0n, for your generosity, and helping spirit.

But I'm pissed because I can't for the life of me, change anything in that EFI, if I do it don't boot.

This last Taco is a challenge, but in the end I win...

Edited June 25, 2025 by MorenoAv

[strangeron]

17 minutes ago, MaLd0n said:

Good to know  

@MaLd0n In your shared EFI folder, do you get the message that instead of trying to create all those UsbMap.kext or UsbPort.kext, you just need to use UsbInjectAll.kext? Or is all the magic in your aml file?

[nmano]

3 hours ago, Takiller said:

Yes, intel wifi via heliport + itwl 😁

V.good I try from yesterday still not work Can I see your config.plist

Thanks.

[Takiller]

6 minutes ago, nmano said:

V.good I try from yesterday still not work Can I see your config.plist

Thanks.

 

config.plist

[sok5]

57 minutes ago, Takiller said:

Yes, intel wifi via heliport + itwl 😁

Heliport doesn't work for me due problem itwl.kext doesn't running.