Jump to content

[pre-release] macOS Tahoe

fantomas

By fantomas,
in New Releases and Updates

 Share
3741 posts in this topic

Recommended Posts

macq
macq
Posted
Posted (edited)

@Anto65 or  others,

 

I am not able to complete boot in spite of mapping the usb and generating the ssdtuiac.aml using hackintool. direct upgrade from sequoia  completed and can reach login screen but locked due to file vault.

 

Attached is my efi folder and aslo my own generated ssdtuiac.aml and the photo of where it hangs. have removed bluetooth and wifi kexts to keep folder size small.

 

Could you please take a look and map my usb ports if possible.

Infinix INBook X1 Intel Core i5 10th Gen 1035G1 - (8 GB/512 GB SSD/Windows 11 Home) XL11 Thin and Light Laptop  

specs: 

 

thanks for all the help.

regards

SSDTUI.aml exported using hackintool.zip

IMG_20250615_213049.jpg

Edited by macq
macq
macq
Posted
Posted
14 minutes ago, Anto65 said:

@macq

 

https://www.insanelymac.com/forum/topic/361162-pre-release-macos-tahoe/page/13/#findComment-2833232

 

hi, thanks

already tried that, just wanted afresh install as after reaching the login now i can reach login but cant enter as usb not available and using a usb mouse leads to a crash. if you could just look at the ports folder and suggest the ssdt, would be a great help.

 

thanks

Irish_Man
Irish_Man
Posted
Posted (edited)
47 minutes ago, D-an-W said:

After getting the USBMap.kext fixed I get past the 509 error in the installer but it stops at the point in the picture below, anyone come across that and fixed it yet please?

 

IMG_6157.thumb.jpg.74ed7e2fc7458286fc384f0a590cc58f.jpg

Spoiler

 

Have you disabled SIP in your .plist?

Edited by Irish_Man
Anto65
Anto65
Posted
Posted (edited)
46 minutes ago, macq said:

hi, thanks

already tried that, just wanted afresh install as after reaching the login now i can reach login but cant enter as usb not available and using a usb mouse leads to a crash. if you could just look at the ports folder and suggest the ssdt, would be a great help.

 

thanks

Inside EFI https://limewire.com/d/4MYGy#JDCjxLtL1Z

 

there are 2 images with the errors found, 2 kexts was enabled but not present in OC->kEXTS
OC was not the latest build available , take from here  https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true&version=1.0.5    build and kexts ( now alredy all updated )
Disabled the SSDT-UIAC edited for Tahoe and enabled your USBPorts kext
Good Luck

Edited by Anto65
  • Like 3
surenmunoo
surenmunoo
Posted
Posted
4 hours ago, verdazil said:

Gigabyte Z490 VISION G / i5-10600 / Sapphire Nitro+ Radeon RX 590

- no graphics acceleration, compatible version of OCLP required for patch.

 

14.thumb.png.4e1809a7005583b76c8f0b544fd3a2c1.png

 

Can you share your EFI for @eSaF He has the Z490 and trying to get his installed. 

  • Like 1
Stefanalmare
Stefanalmare
Posted
Posted (edited)

After playing around with Tahoe:
z690, no problem with MacPro7,1.

h370, work to do for iMac19,1/20,1: Polaris doesn't work with headless IGPU. You have to have IGPU enabled with display connected to run another display on Polaris. I have patched Polaris like OCLP does, but is not Polaris kexts issue.

 

Spoiler

19.1.thumb.png.29a89f4163b9a5a43d7fcc8f69b05386.png

 

Spoiler

7.1.png

 

OC7.1.zip

OC19.1.zip

Edited by Stefanalmare
  • Like 2
arsradu
arsradu
Posted
Posted (edited)
7 hours ago, Sergey_Galan said:

Maybe you will find something useful. And try to disable IGPU in BIOS, for me it was progress, installation went further.

EFI.zip 6.14 MB · 15 downloads

 

Hey! Thank you for the EFI.

 

So...after fiddling a lot with the iGPU, -wegnoegpu flag, pulling out the power cord on the RX 580, pulling the card out entirely (doesn't seem to be necessary if you pulled out the power cord) then putting it back all together, I managed to get to a point where I'm booted from the RX580, into the Language Chooser screen, but after selecting it, it keeps looping back to that.

 

At some point, when booting only with the iGPU, I got to the setup screen, chose the launguage, but after the Privacy screen, it was going to a black screen, then reboot. I tried clearing NVRAM, then it would go into a white screen, no setup, and stop there. Then with the RX580 powered up but not connected to it, it was going to a black screen with cursor.

And removing -wegnoegpu flag, setting BIOS back to PEG - dedicated graphics (previously set to IGD - integrated graphics) now gets me to the language chooser, but loops back after selecting a language.

 

So that's about as far as I got.

 

A lot of back and forth to get to this point.

Anyway, first thing is making sure you can actually boot with the iGPU. I was able to boot, but since I had no drivers installed (I use OCLP for that), my memory was 31 MB and choppy animations. After installing OCLP and adding root patches (in Sequoia of course), VRAM went to the normal 1538 MB (or something like that) and more or less fluid animations.

 

So, the trick here is getting as much of the setup as possible on the iGPU, then switching to the dGPU. In my case, I can't really say it made a huge difference, I still couldn't finish the installation, but I did get further this way.

 

Update: now I get boot to black screen in Sequoia. :)))
Update2: one clear nvram later and I'm back on track with Sequoia, as well.

Edited by arsradu
  • Like 2
Irish_Man
Irish_Man
Posted
Posted
15 minutes ago, D-an-W said:

 

I think so unless Tahoe needs something different?

 

 

"ApplePS2Controller: Timed out on input stream" can relate to misconfigured USB.

Too many errors there :)

What I would do is: reformat usb and recreate the installer, set SIP to 00000000(you can change it back later)

"AbortCommands: :5382:Port 1 - called, deviceWithError 0, errCode = 0xe0030005" - connected usb is causing the panic.

I would double check Usb.kext. Actually I would disable all ports but ones on the back for Usb and mouse/keyboard. 

D-an-W
D-an-W
Posted
Posted
2 minutes ago, Irish_Man said:

"ApplePS2Controller: Timed out on input stream" can relate to misconfigured USB.

Too many errors there :)

What I would do is: reformat usb and recreate the installer, set SIP to 00000000(you can change it back later)

"AbortCommands: :5382:Port 1 - called, deviceWithError 0, errCode = 0xe0030005" - connected usb is causing the panic.

I would double check Usb.kext. Actually I would disable all ports but ones on the back for Usb and mouse/keyboard. 

 

I will try now thanks, that is a freshly created USB installer (It gives the same error as previous one).

 

From Dortania, is that a typo or did you want me to try with it enabled?

  • 00000000 - SIP completely enabled (0x0).
Irish_Man
Irish_Man
Posted
Posted
26 minutes ago, D-an-W said:

 

I will try now thanks, that is a freshly created USB installer (It gives the same error as previous one).

 

From Dortania, is that a typo or did you want me to try with it enabled?

  • 00000000 - SIP completely enabled (0x0).

Yeah, typo. 03080000

kaoskinkae
kaoskinkae
Posted
Posted (edited)

We continue investigating the use of the USBMap.kext and SSDT SSDT-UIAC.aml kexts in Sequoia and Tahoe, but in Sequoia, although the logical SSxx ports appear, on my new computers: the USB 1t 3.0 does not mount as SS at the correct speed of 5g/s. Also, the icon is of a hard drive, not an orange USB. This did not happen with USBInjectAll.kext. It only happens if I put it in a USB3.0 port, in the USB2.0 ports it appears orange.

 

image.png.ce086af8b7f159fe91776c0354f9d062.png

 

Edited by kaoskinkae
  • Like 2
kaoskinkae
kaoskinkae
Posted
Posted
7 minutes ago, Anto65 said:

@kaoskinkae  Intentaría mapear los conectores, todos son internos.

 

  Revelar contenidos ocultos

Captura de pantalla2025-06-15alle20_51_59.thumb.png.5b4c09c7dbddea64a2d1c315330ac323.png

 

Look at my NEW computer, but I think it's the OLD one: it also happens to me, although the USB3.0 SSxx ports are available but are not mounted correctly. I will continue investigating.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...