macOS Sonoma Wireless Issues Discussion.

[miliuco]

1 hour ago, windowless31 said:

Is it related to the Intel frame buffer?
But without the wifi patch texts, the startup works in macOS Sonoma.

Not sure what your issue is. I don't see anything related in config.plist except - before amfipassbeta (you have already tried with this fixed).

Sonoma wifi settings are ok. I have no help, sorry.

[windowless31]

Thanks anyway

[Max.1974]

14 hours ago, HyperX7 said:

 

You can find my EFI folder at the link. My system is the Asus Vivobook i7-10870 written in my signature. Today I started using it by removing the amp=0x80 command from bootargs. Thanks.

 

https://disk.yandex.com/d/ivfCACbzDSIDCQ

 

Hi @HyperX7 im change some little thinks on your config.plist, change some kexts and add some boot-args. 

 

You need use Hackintool and extract all plists reference to your devices only about BCM4352 reference, and insert on Opencore in DeviceProperties menu. 

 

 

 

 

 

 

Need get your own internal@....

 

 

 

 

 

And them add compatible > String > pcie14e4,43a0

 

After that not forget use only one EFI on boot, and type ResetNvram 

 

Your AirportBrcmfixup.kext is loading, because to my EFI works like that. If your was a wireless card "native", you will get KP. 

 

Here your EFI

 

Hope help you.

 

 

 

 

 

EFI Hyperx Sonoma VivoBook i7-10870 UHD 630.zip

Edited October 3, 2023 by Max.1974

[amirali mahmoudi]

Guys I have a weird problem

I did bring back wifi successfully but I ran into some issues.

using amfi=0x80 boot arg will block some apps like creative cloud which I really need, I used AMFIPass.kext instead the boot arg but when I use OCLP and root patches, the system will not boot without that boot args

any idea?

I tried amfipassbeta boot args but didnt help

opencore 0.9.5

OCLP: 1.0.1

iMac19,1

brcm4360 (archer t9)

z390-p

[Max.1974]

3 minutes ago, amirali mahmoudi said:

Guys I have a weird problem

I did bring back wifi successfully but I ran into some issues.

using amfi=0x80 boot arg will block some apps like creative cloud which I really need, I used AMFIPass.kext instead the boot arg but when I use OCLP and root patches, the system will not boot without that boot args

any idea?

I tried amfipassbeta boot args but didnt help

opencore 0.9.5

OCLP: 1.0.1

iMac19,1

brcm4360 (archer t9)

z390-p

 

Are you try this boot-args? 

 

 ipc_control_port_options=0 -lilubetaall 

[amirali mahmoudi]

2 hours ago, Max.1974 said:

 

Are you try this boot-args? 

 

 ipc_control_port_options=0 -lilubetaall 

Didnt work

system not booting

Edited October 4, 2023 by amirali mahmoudi

[Max.1974]

7 hours ago, amirali mahmoudi said:

Didnt work

system not booting

 

If you wanted, share your EFI to analyze 

[amirali mahmoudi]

2 hours ago, Max.1974 said:

 

If you wanted, share your EFI to analyze 

sure 

I would be appreciated if you look into it.

coffee lake, z390 p, rx590 8gb, BRCM 4360 ( Archer T9)

 

config.plist

Edited October 4, 2023 by amirali mahmoudi

[Cyberdevs]

10 hours ago, amirali mahmoudi said:

Guys I have a weird problem

I did bring back wifi successfully but I ran into some issues.

using amfi=0x80 boot arg will block some apps like creative cloud which I really need, I used AMFIPass.kext instead the boot arg but when I use OCLP and root patches, the system will not boot without that boot args

any idea?

I tried amfipassbeta boot args but didnt help

opencore 0.9.5

OCLP: 1.0.1

iMac19,1

brcm4360 (archer t9)

z390-p

If you are using AMFIPass.kext you need to add -amfipassbeta boot arg otherwise it won't work.

[amirali mahmoudi]

3 minutes ago, Cyberdevs said:

If you are using AMFIPass.kext you need to add -amfipassbeta boot arg otherwise it won't work.

I've Added that boot args but still not booting without amfi=0x80

[Cyberdevs]

8 minutes ago, amirali mahmoudi said:

I've Added that boot args but still not booting without amfi=0x80

In the config file you've attached there is no -amfipassbeta boot arg

[SavageAUS]

39 minutes ago, amirali mahmoudi said:

sure 

I would be appreciated if you look into it.

coffee lake, z390 p, rx590 8gb, BRCM 4360 ( Archer T9)

 

config.plist 42.94 kB · 0 downloads

Do you really need all the tools? Misc > Tools.

Device Properties look a lil funky for iGPU.

NVRAM  > ADD you have alcid as boot arg and also listed in device properties.

Kernel > ADD you have intel wifi / BT kexts but your trying to use Broadcom?

Also might help if you list Lilu and VirtualSMC first in the kext order.

config.plist

 

Make sure you have latest AMFIPass

https://github.com/dortania/OpenCore-Legacy-Patcher/blob/main/payloads/Kexts/Acidanthera/AMFIPass-v1.3.1-RELEASE.zip

Edited October 4, 2023 by SavageAUS

[amirali mahmoudi]

2 minutes ago, SavageAUS said:

Do you really need all the tools? Misc > Tools.

Device Properties look a lil funky for iGPU.

NVRAM  > ADD you have alcid as boot arg and also listed in device properties.

Kernel > ADD you have intel wifi / BT kexts but your trying to use Broadcom?

Also might help if you list Lilu and VirtualSMC first in the kext order.

I'll remove alcid

my BT ( handoff) won't work without intel kext

I fixed modern wifi and it's working fine only with amfi=-x80 boot args which block creative cloud from running. and the system will not boot ( when root patches ) without amfi=0x80 and that is my problem. I don't know why AMFIPass.kext won't work for me

If you have any suggestions or if you can please change my config.plist so I would be really appreciated

[amirali mahmoudi]

1 hour ago, Cyberdevs said:

In the config file you've attached there is no -amfipassbeta boot arg

I've tried amfipassbeta but the problem still exist

I found that bluetoolfixup kext prevent system from booting 

Edited October 4, 2023 by amirali mahmoudi

[amirali mahmoudi]

1 hour ago, SavageAUS said:

Do you really need all the tools? Misc > Tools.

Device Properties look a lil funky for iGPU.

NVRAM  > ADD you have alcid as boot arg and also listed in device properties.

Kernel > ADD you have intel wifi / BT kexts but your trying to use Broadcom?

Also might help if you list Lilu and VirtualSMC first in the kext order.

config.plist 57.83 kB · 1 download

 

Make sure you have latest AMFIPass

https://github.com/dortania/OpenCore-Legacy-Patcher/blob/main/payloads/Kexts/Acidanthera/AMFIPass-v1.3.1-RELEASE.zip

I've tested the config you sent.

system boot after root patches, but no BT and no wifi

I've tried many things, and found out the blutoolfixup kext prevent system from boot after root patches without amfi=0x80 and when I remove that kext I dont BT and WIFI still disabled!

[Cyberdevs]

6 minutes ago, amirali mahmoudi said:

I've tested the config you sent.

system boot after root patches, but no BT and no wifi

I've tried many things, and found out the blutoolfixup kext prevent system from boot after root patches without amfi=0x80 and when I remove that kext I dont BT and WIFI still disabled!

Please update your signature with your hardware specs so people can help you easier. 

[amirali mahmoudi]

4 minutes ago, Cyberdevs said:

Please update your signature with your hardware specs so people can help you easier. 

Done
thanks for answering

[Matgen84]

16 minutes ago, amirali mahmoudi said:

I've tested the config you sent.

system boot after root patches, but no BT and no wifi

I've tried many things, and found out the blutoolfixup kext prevent system from boot after root patches without amfi=0x80 and when I remove that kext I dont BT and WIFI still disabled!

 

Hi
I have a combo Fenvi T919 (BCM4360): bluetooth still work on Sonoma without any bluetooth kexts. macOS 14 has kept the native driver for BT, and removed the one for wifi.

Edited October 4, 2023 by Matgen84

[Cyberdevs]

20 minutes ago, amirali mahmoudi said:

Done
thanks for answering

Thanks.

post your entire EFI folder minus Apple folder and your private data like MLB and Serial number we'll take a look.

For intel bluetooth you need to use https://github.com/OpenIntelWireless/IntelBluetoothFirmware/releases alongside with the Bluetoolfixup.kext

 

@Matgen84

Archer T9 is just a Wi-Fi adapter and doesn't have the Bluetooth chip.

@amirali mahmoudi

But if I understand correctly your initial issue was the amfi=0x80 which makes some apps crash.

As I mentioned earlier -amfipassbeta is required with the AMFIPass.kext and the "-" plays a crucial part in boot arguments make sure you include - in -amfipassbeta boot arg if you don't add the - the boot arg won't work at all.

[amirali mahmoudi]

8 minutes ago, Cyberdevs said:

Thanks.

post your entire EFI folder minus Apple folder and your private data like MLB and Serial number we'll take a look.

For intel bluetooth you need to use https://github.com/OpenIntelWireless/IntelBluetoothFirmware/releases alongside with the Bluetoolfixup.kext

 

@Matgen84

Archer T9 is just a Wi-Fi adapter and doesn't have the Bluetooth chip.

But if I understand correctly your initial issue was the amfi=0x80 which makes some apps crash.

As I mentioned earlier -amfipassbeta is required with the AMFIPass.kext and the "-" plays a crucial part in boot arguments make sure you include - in -amfipassbeta boot arg if you don't add the - the boot arg won't work at all.

yes, exactly I have an issue with the amfi=x80 that makes Creative Cloud crash. here is my entire EFI folder, with this config I have BT and Handoff but no WIFI because OCLP is not activated right now, and that's because without amfi=0x80 the system will not boot.

I've tried a couple of things and found that when I root patches without amfi=x80 the bluetoolfixup kext prevents the system from boot, and when I remove bluetoolfixup system will boot but no wifi and no BT

https://drive.google.com/file/d/1J9yo0eKxpP-EK_lpWG5NL58qy4EayTwz/view?usp=sharing

[Cyberdevs]

@amirali mahmoudi

I don't see anything wrong in your EFI except for the min kernel which is set to 21.0.0 for the AMFIPass.kext.

I updated your OC and the kexts so give this folder a try, use a USB disk to boot from this EFI don't replace yours and regenerate or add your SMBIOS info to the config.plist

 

I just updated my Z690 rig to macOS Sonoma final release and used AMFIPass.kext and the boot arg to enable my Wi-Fi/BT (fenvi T919) and everything went as expected. I used OCLP 1.0.1 

EFI 2.zip

[amirali mahmoudi]

18 hours ago, Cyberdevs said:

@amirali mahmoudi

I don't see anything wrong in your EFI except for the min kernel which is set to 21.0.0 for the AMFIPass.kext.

I updated your OC and the kexts so give this folder a try, use a USB disk to boot from this EFI don't replace yours and regenerate or add your SMBIOS info to the config.plist

 

I just updated my Z690 rig to macOS Sonoma final release and used AMFIPass.kext and the boot arg to enable my Wi-Fi/BT (fenvi T919) and everything went as expected. I used OCLP 1.0.1 

EFI 2.zip 18.52 MB · 12 downloads

thanks for the EFI

I tried the EFI you sent, and launched OCLP and root patches, the system now boots after root patches but Wifi is still disabled

[Matgen84]

18 hours ago, Cyberdevs said:

I just updated my Z690 rig to macOS Sonoma final release and used AMFIPass.kext and the boot arg to enable my Wi-Fi/BT (fenvi T919) and everything went as expected. I used OCLP 1.0.1 

 

Hi @Cyberdevs

What boot-args you say using for enable Fenvi card !
Along my side, I test my onboard Intel 9560 ac with Airportitlwm: work fine on Sonoma. So I don't know if I will use OCLP to root patch my Fenvi T919.

[Cyberdevs]

1 minute ago, Matgen84 said:

Hi @Cyberdevs

What boot-args you say using for enable Fenvi card !
Along my side, I test my onboard Intel 9560 ac with Airportitlwm: work fine on Sonoma. So I don't know if I will use OCLP to root patch my Fenvi T919.

Before explaining the options this part is mandatory (This steps have been explained and been posted before but for the sake of clarity I'll post them again):

 

To use OCLP current patches, you'll need to ensure the following:

 

1. System Integrity Protection is set to 0x803 csr-active-config | data | 03080000

 

2. Reset NVRAM or add csr-active-config to Delete to ensure the new variable is set

 

3. Secure Boot Model is set to Disabled

 

4. Following kexts are blocked:

com.apple.iokit.IOSkywalkFamily Set the Strategy of the blocked kext to "Exclude" (Reference)

Set MinKernel to 23.0.0 to ensure patches only apply on Sonoma

 

5. Following kexts are injected:

IOSkywalk.kext

IO80211FamilyLegacy.kext

Kext has a child, AirPortBrcmNIC.kext, ensure this is injected as well

Set MinKernel to 23.0.0 to ensure patches only apply on Sonoma

 

Once these are injected, you can run OpenCore-Patcher's Post-Install option and root patch. On reboot, Wireless support should be restored assuming your machine was configured correctly to the above."

 

For using fenvi T919 you have two options:

 

Handling AMFI:

To disable AMFI:

boot-args | string | amfi=0x80

 

1. Using amfi=0x080 as a boot arg with csr-active-config=03080000

or

2. Using AMFIPass.kext with boot arg -amfipassbeta and csr-active-config=03080000

 

For Intel it's another story.

[Matgen84]

@Cyberdevs

Thank a lot for your reminder of the Broadcom procedure for OCLP. 😊 For Intel, as I wrote, with Airportitlwm: all work fine on Sonoma. One of the advantage I've not revert root-patches because OCLP is not necessary for Intel 9560 ac. And I can kept SIP enable.
It's why I reflect activated or not by OCLP, my Fenvi T919.