Jump to content

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

AudioGod

By AudioGod,
in Installation Guides

 Share
5539 posts in this topic

Recommended Posts

panosru
panosru
Posted
Posted

@D3v1L I ended up turning wake on lan off first because I wasn't able to make it work (with or  without gprw), second, in order for wake on lan to work, you need to have Erd disabled in BIOS, but, if you have it disabled, then USB ports will continue delivering power to USB devices even after you shutdown your computer, and I don't want that (I have a couple of devices that have RGB on them and they don't provide any way to switch that {censored} off, I despise RGB!!! :D). Wake on Lan was a nice to have feature but it isn't a necessity for me, therefore, I don't really care about it not working.

 

Thanks again for the EFI, it works great and I haven't encountered any video stuttering since I used it :D 

  • Like 1
D3v1L
D3v1L
Posted
Posted (edited)
1 hour ago, benjiolino said:

Yes I use the 9900k with iMac setting. You say it would be faster as MacPro? What CPU would you recommend for editing? I see you have a build with a thread ripper and a 6900xt. is it good for resolve?

MacPro is faster, yes. Threadripper is much good with resolve, but it will cost a little more than a 13900k 🤣 btw, what is wrong with your 9900k?

Edited by D3v1L
Blesh
Blesh
Posted
Posted

@D3v1L
For almost two days, I've observed that my computer starts freezing/stuttering when many Safari tabs are open until it freezes completely. CPU and GPU are not reaching high usage while this is happening. Do you think it might have to do something with the CPUFriend kext? Maybe not really  "friendly" to my system?

D3v1L
D3v1L
Posted
Posted
8 minutes ago, Blesh said:

@D3v1L
For almost two days, I've observed that my computer starts freezing/stuttering when many Safari tabs are open until it freezes completely. CPU and GPU are not reaching high usage while this is happening. Do you think it might have to do something with the CPUFriend kext? Maybe not really  "friendly" to my system?

Your Power management in BIOS setting is disabled? Btw, try to disable cpufriend and cpufrienddataprovider..

D3v1L
D3v1L
Posted
Posted
20 hours ago, panosru said:

@D3v1L I ended up turning wake on lan off first because I wasn't able to make it work (with or  without gprw), second, in order for wake on lan to work, you need to have Erd disabled in BIOS, but, if you have it disabled, then USB ports will continue delivering power to USB devices even after you shutdown your computer, and I don't want that (I have a couple of devices that have RGB on them and they don't provide any way to switch that {censored} off, I despise RGB!!! :D). Wake on Lan was a nice to have feature but it isn't a necessity for me, therefore, I don't really care about it not working.

 

Thanks again for the EFI, it works great and I haven't encountered any video stuttering since I used it :D 

You don't know but...someone say me that more RGB give you more FPS! 🤣🤣🤣

  • Haha 2
pkdesign
pkdesign
Posted
Posted
On 11/6/2022 at 7:32 AM, panosru said:

@D3v1L I ended up turning wake on lan off first because I wasn't able to make it work (with or  without gprw), second, in order for wake on lan to work, you need to have Erd disabled in BIOS, but, if you have it disabled, then USB ports will continue delivering power to USB devices even after you shutdown your computer, and I don't want that (I have a couple of devices that have RGB on them and they don't provide any way to switch that {censored} off, I despise RGB!!! :D). Wake on Lan was a nice to have feature but it isn't a necessity for me, therefore, I don't really care about it not working.

 

Thanks again for the EFI, it works great and I haven't encountered any video stuttering since I used it :D 

I assume you meant ErP?

  • Like 1
benjiolino
benjiolino
Posted
Posted
On 11/6/2022 at 1:34 PM, D3v1L said:

MacPro is faster, yes. Threadripper is much good with resolve, but it will cost a little more than a 13900k 🤣 btw, what is wrong with your 9900k?

There is nothing wrong with the 9900k. but faster is better with editing, right?

Do you have a resent EFI for MAcPro for the Z390 Aorus Pro? Mine is still at Opencore 0.78 and iMac 19,1

D3v1L
D3v1L
Posted
Posted
11 hours ago, benjiolino said:

There is nothing wrong with the 9900k. but faster is better with editing, right?

Do you have a resent EFI for MAcPro for the Z390 Aorus Pro? Mine is still at Opencore 0.78 and iMac 19,1

 

yes, for sure... OC 0.8.6 ...you need to make your own platform info (serial mlb etc..) and your own usbmap (if you use kext, don't use the current, it don't work. You need to edit plist file and rename iMac19,1 with MacPro7,1 on XHC section (2 x renames))...then reset nvram, and boot with this (on USB pendrive please, try it before overwrite yours.

 

EFI-MACPRO71-I9-9900k-RX6900XT.zip

 

  • Like 1
stdmje
stdmje
Posted
Posted

Hi all,

 

After many years of success with AudioGod's EFI, now when i try to upgrade to Ventura, the installer reboots and nothing happens.

 

I've been updating my OC version and kexts with OC Auxiliary tools and everything works fine in Monterey 12.6.1

 

I am using a z390 Pro, Intel i7 and a Radeon RX 580 GPU. Imac 19,1.

 

If anyone can help me or share a working EFI would be amazing.

 

Thanks a lot for your support.

panosru
panosru
Posted
Posted

Is anyone here able to transfer calls between iPhone and Hackintosh? I can make calls via my Hackintosh and transfer them to my iPhone, but I'm unable to transfer any call from my iPhone to my Hackintosh, once I select my Hackintosh, the call is dropped. At first I thought that this might be a Hackintosh issue, but I saw similar issues in native macs and even recent ones with Apple Silicon. Thanks!

panosru
panosru
Posted
Posted

and you can transfer your call from your iPhone to your hackintosh without any issue? In my case my iPhone doesn't show up :(

stdmje
stdmje
Posted
Posted

Hi @eSaF thanks a lot for that. The EFI works fine but still rebooting when trying to upgrade to Ventura. I've also tried with the EFI posted by @D3v1L but happens the same.

 

When i select the MacOS Installer in the OC boot screen the Apple logo appears and after some seconds the system reboots.

 

 

benjiolino
benjiolino
Posted
Posted
Quote

There is nothing wrong with the 9900k. but faster is better with editing, right?

Do you have a resent EFI for MAcPro for the Z390 Aorus Pro? Mine is still at Opencore 0.78 and iMac 19,1

 

yes, for sure... OC 0.8.6 ...you need to make your own platform info (serial mlb etc..) and your own usbmap (if you use kext, don't use the current, it don't work. You need to edit plist file and rename iMac19,1 with MacPro7,1 on XHC section (2 x renames))...then reset nvram, and boot with this (on USB pendrive please, try it before overwrite yours.

I change my smBIOS to MacPro but did not notice any performance gains. Just did a comparison to my M1 Pro MacBook in Davinci Resolve, transcoding a H.264 to ProRes HQ which I do all the time. It´s quite shocking. The M1 Pro took 17 seconds and the Hack 1 minute and 5 seconds for the same clip. I wonder how this can happen. RAW performance is similar in Cinebench. I´m wondering if it makes sense to upgrade to a 13900k for example. During the export the 9900k as maxed out. The M1 Pro was using 20% of its CPU. I guess the rest was done by the hardware encoders. 

D3v1L
D3v1L
Posted
Posted (edited)

well Cinebench is not a refer... btw.. no, not make sense (for me...). ...fast encode...well same here.. MacPro7,1 is 10x faster than my z390 hack...Tr40 is 2x faster than my MacPro but... z390 is 1,2k€; MP7,1 is 38k€ and Tr40 is 9k€... upgrade, worth the money or is only to have something faster? I'll use it for work. Time is money and, for me, is worth... for you? (9900k vs 13900k in hackintosh uhm...I think is faster but..not sure is TOO fast...) 🙂 

Edited by D3v1L
D3v1L
D3v1L
Posted
Posted

"I change my smBIOS to MacPro but did not notice any performance gains." So strange... uhm i think make somethings wrong maybe with bios settings... 

benjiolino
benjiolino
Posted
Posted

"So strange... uhm i think make somethings wrong maybe with bios settings... "

 

Maybe something is wrong.

Here I made a comparison between my M1 Pro and the 9900k in Resolve. Quiet disappointing.

 

https://vimeo.com/769443452

 

here is the file I used:

 

https://drive.google.com/file/d/1ThzRbBEonNY2AvZoD-rtJzj53byP3SmP/view?usp=share_link

 

I wonder if any of you hacks can beat the M1 Pro base model in Resolve.

CloverLeaf
CloverLeaf
Posted
Posted

@benjiolino M1/M2's are well known for it's great performance in video editing. Intel based hacks are good all arounders + you have the upgradability and the freedom to change parts according to your needs. If you mostly do video editing, decoding etc. then... yes,  M1/M2 is a better option in terms of optimization and performance BUT worst in customization and future upgrades.

  • Like 1
D3v1L
D3v1L
Posted
Posted (edited)

@benjiolino Z390 + 6 core transcoding in 1min 37sec ; MacPro + 28 core transcoding in 41sec ; Tr40 + 32 core transcoding in 26sec . M1 and M2 is normally faster due to ARM architecture and 'couse they use dedicate transcoding chip... MBP have good speed! but...you buy it, they die with it (explain: update hardware not too uhm...easy xD ) btw, transcoding speed related to: ARM cpu, 6gbps native pci line nvme, native encoding chip etc. it's normal evolution 🙂 I think new MP with M2 chip it take 2/3 sec for doing this task LoL ... 😄 

Edited by D3v1L
  • Like 1
Blesh
Blesh
Posted
Posted (edited)

@D3v1L Small update:
After removing CPUFriend.kext everything works fine. Also updating to macOS 13.0.1 went trough like butter. And again Thank you bro! you're awesome!
 

Edited by Blesh
  • Like 1
 Share
Go to topic listing
×
×
  • Create New...