Recently Browsing 0 members
No registered users viewing this page.
VoodooI2C-DSDT is a repository that is aiming at collecting various successful DSDTs for Voodoo I2C.
The purpose of this repository is to provide some useful code examples for people who haven't yet make Voodoo I2C work. Maybe It don't have your model of laptop, but code in this repository may have some help and references for you.
Note that the code in this repository is ONLY FOR REFERENCES and it can‘t replace your own work!
This repository welcomes everyone to submit DSDT code examples that have successfully made VoodooI2C work by PR. To submit your example, please put the DSDT file (or Hotpatch SSDT file), an ioreg without Voodoo I2C installed, and Info.txt in a folder named by your laptop model. Info.txt should include:
Your CPU model (better for including CPU platform)
Your touchpad Device ID
The mode you use (GPIO interrupt or polling)
Satellite Driver You Use
Then, fork this repository and clone it, put your file in and commit it to your repository. After checking the conflicts, you can send your commit as a PR to me.
An example for submitting can be found in Lenovo Xiaoxin Chao 7000-14.
@Alexandred for VoodooI2C @daggeryu for the idea in this repository @penghubingzhou and @williambj1 for maintaining
MOJAVE HACKINTOSH GUIDE
**FOR** GIGABYTE Z390 AORUS PRO
CREDITS & THANKS
His help with EFI configuration and DSDT
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
autumnrain, slice2009, zenith432
ESP PRO MOUNTER
JoniVR & theOneyouseek
• Intel I7 8700
• Gigabyte Z390 AORUS PRO
• Gigabyte AORUS RADEON RX 580 8GB
• Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16 In this build, both memory modules are installed in memory slots DDR4_A1 and DDR4_B1
• Corsair RM650x 80 Plus Gold Power Supply Unit
• Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
• Samsung EVO 500GB SSD (2.5) macOS Mojave
• Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
• NZXT H500 Mid Tower ATX Case
• RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS
• WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
• HDMI audio on RX580
• Ethernet Port
• SSD Trim
• USB 3.0 & 2.0
• Hardware Acceleration
PART 1 - DOWNLOAD
Download the following:
• PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
• POST-INSTALL Aorus Pro Z390 EFI - RX580.zip
// INTEL UHD 630 EFI Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX spoiler below!
• PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
• POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
• ESP MOUNTER PRO v1.9
• macOS MOJAVE
• CLOVER CONFIGURATOR
• EmuVariableUefi-64.efi ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
• Native Display Brightness with MonitorControl
PART 2 - BIOS SETTINGS (version F5 )
Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
• Enter BIOS → Press F12 → Enter Setup
• Save & Exit → Load Optimized Defaults
• BIOS → Windows 8/10 Features → Other OS
• BIOS → CSM Support → Enabled
• Peripherals → Initial Display Output → PCIe 1 Slot
• Peripherals → Trusted Computing → Security Device Support → Disable
• Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support → Disable
• Peripherals → USB Configuration → Legacy USB Support → Enabled
• Peripherals → USB Configuration → XHCI Hand-off → Enabled
• Peripherals → Network Stack Configuration → Network Stack → Disabled
• Peripherals → SATA And RST Configuration → SATA Mode Selection → AHCI
• Chipset → Vt-d → Disabled
• Chipset → Internal Graphics → Enabled
• Chipset → DVMT Pre-Allocated → 64M
• Chipset → DVMT Total Gfx Mem → 256M
• Chipset → Audio Controller → Enabled
• Chipset → Above 4G Decoding → Disabled
• Power → ErP → Disabled
• Power → RC6 (Render Standby) → Enabled
// IF USING CORSAIR H100i V2 AIO CPU WATER COOLER
• MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM
• Save & Exit → Save & Exit Setup
SCREEN DUMP SPOILERS
PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
Prepare USB Installer for Mojave ( Video below )
• Insert USB drive
• Launch /Applications/Utilities/Disk Utility
• Disk Utility → View → Show All Devices
• On Left-hand panel → External →(Identify your USB device in left hand panel)
• Click and highlight your USB device in the left-hand panel.
• Click erase button.
• Name: USB
• Format: Mac OS Extended (Journaled )
• Scheme: GUID Partition Map
• Click Erase button.
• Place the downloaded MacOS Mojave app into Applications folder.
• Open Terminal copy and paste:
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created • Enter
PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER
Make Mojave USB flash drive installer bootable.( Video below )
• Launch Clover application, double click.
• Click Continue → Continue → Continue
• Click Change Install Location button.
• Click Install macOSMojave USB installer → Continue
• Click Customise button
Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume NO NEED TO INSTALL RC SCRIPTS ON USB INSTALLER • Click Install button
• Installation Complete!
PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip OR if no graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip ( Video below )
• Install ESP Mounter Pro v1.9
• Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
• Open mounted EFI partition found on desktop
• Copy all the contents from Aorus 390 Pro EFI folder
• Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
ENSURE BIOS: Above 4G Decoding is set to Disabled
if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts.
• INSERT USB INSTALLER INTO THE USB 2.0 PORT
• Power on PC and press F12• Choose bootable USB drive from boot menu.
• Install macOS Mojave to internal solid state or hard drive.
When system returns to the Clover boot menu choose:
• Boot macOS Install from Macintosh
At next restart, press F12 and boot from external UEFI USB device and choose:
• Boot macOS Install from Macintosh
Proceed with macOS Mojave install
macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
Make internal drive bootable ( Video below )
So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
To boot from the internal system drive without the installer:
Download and install Clover with RC Scripts on target volume.
If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip folder and paste it inside the the System Drive EFI partition. OR
If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip folder and paste it inside the the System Drive EFI partition.
• Remove USB Mojave installer and shut down and restart.
Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost !
PART 8 – ENABLE IMESSAGES & FACETIME
Configure Config.plist for iMessages. ( Video below )
• SMBIOS = Mac Mini 8.1
• Rt Variables —> ROM —> is your MAC address (delete colons from Mac address)
• MLB field = Enter serial number generated and append 5 random characters
• SmUUID = in Terminal run command “uuidgen” and copy it to SmUUID field
• Board Serial is same as MLB field.
• Clover Configurator —> Save
• Mount internal drive EFI/ESP partition
• Go to folder CLOVER → drivers64UEFI
• Delete AptoMemoryFix-64.efi
• Place both EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi inside → drivers64UEFI
Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
• Slide = 0
Shutdown and then press power on button on PC.
• You should now be able to Log into iCloud, iMessages and FaceTime
• NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder
• Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
• It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area” post errors.
PART 9 – ENABLE TRIM for Solid State Flash Drives
Open Terminal and enter the following command:
sudo trimforce enable
DEFAULT SSDT – DEFAULT SSDT USB PORTS FIX CONFIGURATION - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER
Limitation: USB2 devices can not be used on SS03 → SS08
------------ GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH WITH SSDT USB FIX ------------
OPTIONAL: Set Wi-Fi Country Code
OPTIONAL: System Information - PCI
OPTIONAL: Enable HDMI Audio on RX580
OPTIONAL: Native Display Brightness - with MonitorControl
OPTIONAL: Dual Boot macOS Mojave & Windows 10
OPTIONAL: Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
OPTIONAL - ALTERNATIVE SSDT 1 – SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder
OPTIONAL - ALTERNATIVE SSDT 2 - SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder
OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
FRAMEBUFFER PATCHING – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER ..... THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix
DSDT Request - random restarts, shutdown fix, glitches caused by GPU or memory (X99, i7 5820k, 1060)By Gorec
I apologize in advance if I didn't post in the right category and if my title and description aren't specific enough :c
My config in a nutshell:
CPU: i7 5820k GPU: MSI GTX 1060 3GB RAM: 16 GB MOBO: MSI X99 SLI PLUS I attached RunMe output with all the details of my built.
I have my Hackintosh for about half a year. That time I managed to make it works and fix major issues, but some of them left unresolved since then and I ignored them until now.
I use my Hackintosh for Adobe projects (PR, AE, PS, IL, AU and a lot more) - most of them connected with video editing of course browsing with Chrome and other small tasks.
Random restarts - this is the biggest one. I'm starting to work on bigger and bigger projects and at this time I think I can't allow this to happen that often. In the past, they happened like once a day or a couple of times a week. However, now it's just frustrating when it happens even 5 or more times a day. I've tried to observe and find out what can be the cause but I haven't managed to find any connections. I thought it happens when Premiere or another app is using GPU, but I haven't seen increased usage when it restarts. I think that it can be connected with GPU, memory or PSU or... meh, anything else. I don't have resources to check if it'll work with other components. There should be some fix for this. I will really appreciate any help with this :c Restart instead of shutdown & sleep doesn't work. I've tried to look through some Google results for this and tried many solutions (as you can see in attached Clover folder), but I think the right one for many of these issues is to make my own DSDT. Glitches, freezes and other things while encoding a video. It happens very often when I try to do this. Maybe it is an issue with GPU or (hopefully) only with GPU drivers which can be fixed with some patch. Today my headphones stopped working. I have a multi-output device configured in the Audio MIDI Setup app which includes my headphones (HyperX Cloud via USB) and Soundflowerbed virtual audio device for capturing system audio. Today while I was trying (like 15 times) to encode a video in Media Encoder in the background and watch video on YouTube I stopped hearing anything from my system. Of course, it restarted a couple of times as always, but even this didn't solve this. If I plug them directly with mini jack (not via USB Soundcard which was in the box and which I always used) in the front IO or the back I only hear some loud noise It takes EX-Fat formatted volumes a few minutes to mount after each restart. I found a workaround to format it with NTFS since I have Tuxera installed and I will reformat these volumes when I will find time for this, but maybe there is some fix for this. GPU is a little bit hot. HW Monitor shows it is only 45-55 degrees, but for my hand is a little bit hot, idk. Also related to GPU - glitch after POST but before entering Clover boot menu. It is a black screen with little white squared glitches for a few seconds. Maybe it indicates the GPU drivers are loading, but maybe it shouldn't be like this. And if I can ask about that - I can't make all applications hide on startup. I, obviously, have "Hide" checkbox checked on every login item in settings, but it doesn't work, none of the apps is hidden in the dock. Is there a way to fix this? Also a small but annoying problem - I can't turn off permanently Mojave update notification (since I tried to install it, and I had to reverse to High Sierra because I had a black screen and I didn't have time for repairing all of them. Tags are not working in Finder - every time I tag a file or folder and make a change in it (for example save a text file) the tag disappears.
So, with knowing all of that, is there a way to make a proper DSDT file for my Hackintosh? I tried to look through some guides on how to make it but I think I reached my abilities to understand how Mac OS works and what all of these things are, so I'm asking you guys politely, would someone like to help me? At least with these random restarts? :/
I really begin to think that I'm a newbie in configuring all of that Clover things - even after what I managed to do with my PC. Help me, pleease... :c
If you have any questions post it below, I will really appreciate any help <3
Send me MBP-Gorec.home.zip
Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
CPU: Intel i7 6500U
Wi-Fi & Bluetooth: Dell DW1820A
Hello Guys I'm currently planning to build my first hackintosh and I've made a first list with the components I would use. The Hackintosh would be used for music and video productions (with macos Sierra).
I would be very thankful if someone could go through my list and give me his opinion, if I'm on a good way with the components I chose or if there are better options in the same price category.
Motherboard: Gigabyte Z390 AORUS PRO WIFI ATX CPU: Core i9-9900K CPU Cooler: Corsair H60 (Water) Graphic Card: Sapphire RX 580 Pulse 8GB RAM: Crucial Ballistix Sport LT (32GB) SSD: Samsung 860 EVO 1TB PSU: Corsair RM 650x Watt Case: Thermaltake View 27