Andrey1970 Posted February 15, 2020 Share Posted February 15, 2020 (edited) 6 hours ago, Nuacho said: vcore 0,024v? maybe you were wrong? Give high loading on CPU, you have to see correct Vcore. CPU in idle time. CPU high loading. Edited February 15, 2020 by Andrey1970 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708374 Share on other sites More sharing options...
DocXavier Posted February 15, 2020 Share Posted February 15, 2020 (edited) 1 hour ago, Andrey1970 said: Give high loading on CPU, you have to see correct Vcore. You are right. So, is 0.024 ok for idle? Edited February 15, 2020 by DocXavier Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708382 Share on other sites More sharing options...
Andrey1970 Posted February 15, 2020 Share Posted February 15, 2020 57 minutes ago, DocXavier said: You are right. So, is 0.024 ok for idle? Yes, it is strange, but any other IO-chip sensors from FakeSMC, too will show too small Vcore in idle. But you can always look Vcore here: Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708396 Share on other sites More sharing options...
vector sigma Posted February 15, 2020 Share Posted February 15, 2020 11 minutes ago, Andrey1970 said: Yes, it is strange, but any other IO-chip sensors from FakeSMC, too will show too small Vcore in idle. But you can always look Vcore here: VID instead of Vcore?? Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708404 Share on other sites More sharing options...
Andrey1970 Posted February 15, 2020 Share Posted February 15, 2020 10 minutes ago, vector sigma said: VID instead of Vcore?? I didn't understand. Explain, is slightly more detailed that you wanted to tell. Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708406 Share on other sites More sharing options...
vector sigma Posted February 15, 2020 Share Posted February 15, 2020 (edited) Vcore is the limit of the voltage the CPU can use while the VID is the voltage the CPU uses at any particular moment depending by its frequency range. The CPU communicate the VID to the VRM (Voltage Regulator Module) which send the correct Vcore to use. (large use of google ) VID --> VRM --> Vcore Basically VID is it a request, VRM allow or disallow and regulate the request, and Vcore is the final the CPU uses. Edited February 15, 2020 by vector sigma Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708408 Share on other sites More sharing options...
vector sigma Posted February 15, 2020 Share Posted February 15, 2020 2 hours ago, DocXavier said: You are right. So, is 0.024 ok for idle? if you turn off the power saving mode in your BIOS (C1E/EIST), if that is the case, you should see this value going to the max. Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708414 Share on other sites More sharing options...
Andrey1970 Posted February 15, 2020 Share Posted February 15, 2020 3 minutes ago, vector sigma said: if you turn off the power saving mode in your BIOS (C1E/EIST), if that is the case, you should see this value going to the max. Yes, I know it. 1 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708416 Share on other sites More sharing options...
kecinzer Posted February 17, 2020 Share Posted February 17, 2020 I'm trying to switch from FakeSMC to VirtualSMC and also SMCBatteryManager. It looks good at first sight, but SMCBattery manager shows me 0 cycle count on battery. ACPIBatteryManager shows correct count. I saw, that there is fix for battery cycle count 4 months ago, but even with latest version it shows 0. Is there some relation between VirtualSMC and SSDT patches? I currenty use this one (https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch/blob/master/hotpatch/SSDT-BATT-G4.asl) for my battery. Thank you for advices. Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2708717 Share on other sites More sharing options...
Vyzantion Posted March 22, 2020 Share Posted March 22, 2020 Today I decided to give a new look to VirtualSMC. For a long time, I consider it to unstable for my legacy configuration and relied on FakeSMC as I did for years. Just searching the web, I have discovered that VirtualSMC is updated regulary, FakeSMC is not updated as a release since October. Slice has taken over the developement of FakeSMC last year, but I suspect that FakeSMC is already becoming deprecated, like Chameleon became deprecated in favour of Clover. So, if Slice of Vector Sigma see this, I ask: Is this true? Would Slice become a developer of VirtualSMC instead of FakeSMC? If so, would you advise me to switch to VirtualSMC from FakeSMC on a legacy machine running Catalina? 1 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2713380 Share on other sites More sharing options...
FredWst Posted April 3, 2020 Share Posted April 3, 2020 (edited) Hi, On my iMac18,3 hack : SMC is detected as version 2 MMIO. (Just like it should be) On my Macmini 8,1 hack SMC is detected as version 1 PMIO. (Version 3) is it a bug in virtualSMC ? Or a bug in OpenCore reporting v1 instead v2 ? EDIT: I answer to myself, there's some informations missing about SMC revision and branch, not available atm. EDIT: T2 chipset. kernel: (Lilu) VirtualSMC init: @ (DBG) successfully created vsmc provider instance kernel: (Lilu) VirtualSMC vsmc: @ (DBG) found APP0001 compatible service SMC kernel: (Lilu) VirtualSMC vsmc: @ (DBG) ignoring self by class name kernel: (Lilu) VirtualSMC vsmc: @ (DBG) found 0 smc devices kernel: (Lilu) VirtualSMC vsmc: @ (DBG) obtained device model info from the bootloader kernel: (Lilu) VirtualSMC vsmc: @ (DBG) getting buffer rev from GenericV1 (override 0) kernel: (Lilu) VirtualSMC vsmc: @ (DBG) getting buffer revfb from GenericV1 (override 0) kernel: (Lilu) VirtualSMC vsmc: @ (DBG) getting buffer revfu from GenericV1 (override 0) kernel: (Lilu) VirtualSMC vsmc: @ (DBG) getting buffer branch from GenericV1 (override 0) kernel: (Lilu) VirtualSMC vsmc: @ (DBG) detected model smc-piketon from GenericV1 (override 0) I use vsmcgen=2 in boot-args. i really don't know the main differences and if it has an impact on my hack. Fred Edited April 6, 2020 by FredWst 1 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2715301 Share on other sites More sharing options...
arabesc Posted April 7, 2020 Share Posted April 7, 2020 (edited) I've updated VirtualSMC from version 1.1.1 to 1.1.2 and my system no more comes to desktop, there's just a black screen. Is it a know issue? Edited April 7, 2020 by arabesc Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2715829 Share on other sites More sharing options...
tikizondo94 Posted April 7, 2020 Share Posted April 7, 2020 14 hours ago, arabesc said: I've updated VirtualSMC from version 1.1.1 to 1.1.2 and my system no more comes to desktop, there's just a black screen. Is it a know issue? Same result on all of my machines also, Intel and Ryzen. Clover and OpenCore 0.5.6. Never loads to desktop. Revert to 1.1.1 and all is back to normal Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2715942 Share on other sites More sharing options...
FredWst Posted April 7, 2020 Share Posted April 7, 2020 (edited) Hi, VirtualSMC last git push : Disable modules as they break Coverity. If I understand you're with AMD Cpu with SMCAMDProcessor kext. VirtualSMC should be the reason not OpenCore 0.5.7. Revert back virtualSMC should solve your issue. Fred Edited April 7, 2020 by FredWst 1 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2716009 Share on other sites More sharing options...
pepitillo Posted April 9, 2020 Share Posted April 9, 2020 Hi there, I'm been testing VirtualSMC on my system and its running fine, but the only thing that doesn't work is GPU temperature. I've a GeForce 710. Is there a chance to have temperature of GPU on Nvidia with VirtualSMC? Currently, I have FakeSMC installed alongside GeforceSensors. Thanks Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2716489 Share on other sites More sharing options...
Andrey1970 Posted April 10, 2020 Share Posted April 10, 2020 3 hours ago, pepitillo said: Hi there, I'm been testing VirtualSMC on my system and its running fine, but the only thing that doesn't work is GPU temperature. I've a GeForce 710. Is there a chance to have temperature of GPU on Nvidia with VirtualSMC? Currently, I have FakeSMC installed alongside GeforceSensors. Thanks No GPU sensors. CC @joedm ru Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2716515 Share on other sites More sharing options...
Modmike Posted April 11, 2020 Share Posted April 11, 2020 (edited) oops, I found it. Edited April 11, 2020 by Modmike Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2716878 Share on other sites More sharing options...
Alex_za Posted April 25, 2020 Share Posted April 25, 2020 (edited) Hi. How can I configure the Rx580 fans to work at a certain temperature? Привет. Как то можно настроит вентиляторы Rx580 на повышенную работу при определенной температуре? OS Catalina 10.15.4 | Gigabyte b450 bch3 |Ryzen 2600 | Radeon RX 580 8 ГБ Edited April 25, 2020 by Alex_za Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2719318 Share on other sites More sharing options...
1Ale1 Posted April 26, 2020 Share Posted April 26, 2020 On 4/7/2020 at 4:54 PM, tikizondo94 said: Same result on all of my machines also, Intel and Ryzen. It's strange, many people reported this with VSMC 1.1.2 and reverted to 1.1.1, but with the build I have in signature down here I had no issues with 1.1.2 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2719375 Share on other sites More sharing options...
kecinzer Posted April 29, 2020 Share Posted April 29, 2020 Is there any one else with this issue? https://github.com/acidanthera/bugtracker/issues/879 Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2720040 Share on other sites More sharing options...
vector sigma Posted April 29, 2020 Share Posted April 29, 2020 On 4/26/2020 at 12:02 PM, 1Ale1 said: It's strange, many people reported this with VSMC 1.1.2 and reverted to 1.1.1, but with the build I have in signature down here I had no issues with 1.1.2 may be are the same who forked the bug tracker Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2720106 Share on other sites More sharing options...
tyta Posted May 6, 2020 Share Posted May 6, 2020 (edited) Hey. Help set up sensors. I said that I need to kext folder EFI-OC-kext, but no sensors. I'm new to this .If I had Ryzen 2600 Edited May 6, 2020 by tyta Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2721273 Share on other sites More sharing options...
neemagha Posted May 6, 2020 Share Posted May 6, 2020 Hello. iStat was working perfectly on my Hackintosh. The CPU and GPU temps are no longer displaying. I have fully updated to OpenCore 0.5.8 and latest VirtualSMC and associated drivers. Any suggestions? Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2721279 Share on other sites More sharing options...
tyta Posted May 6, 2020 Share Posted May 6, 2020 (edited) 1 hour ago, neemagha said: Привет. iStat отлично работал на моем Хакинтоше. Температуры CPU и GPU больше не отображаются. Я полностью обновился до OpenCore 0.5.8 и последней версии VirtualSMC и связанных драйверов. Какие-либо предложения? I installed OpenCore 0.5.7, Mac OS Catalina 10.15.4, VirtualSMS updated in OpenCore configurator. Edited May 6, 2020 by tyta Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2721285 Share on other sites More sharing options...
tyta Posted May 6, 2020 Share Posted May 6, 2020 2 hours ago, tyta said: I installed OpenCore 0.5.7, Mac OS Catalina 10.15.4, VirtualSMS updated in OpenCore configurator. I've found something ...Sanity Checker Link to comment https://www.insanelymac.com/forum/topic/335292-virtualsmc-%E2%80%94-smc-emulator/page/29/#findComment-2721297 Share on other sites More sharing options...
Recommended Posts