Jump to content

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell


2509 posts in this topic

Recommended Posts

top top, I think I'll offer u a beer, just to thank you for all the patience and your dedication you make for us. ;)

 

Thank you

Welcome!

Enjoy!

IORegistry report  

put in folder

DSDT02.aml.zip

press O key in Clover boot screen, go to Acpi Patching/DSDT Name and put DSDT02.aml, best for tests

i need one ioreg with new DSDT, ok?

  • Like 1

usb work properly but sleep and shutdown not working as they should

DSDT.03.zip

pmbase is 0x00000000

check if Shutdown work

 

what happens with sleep?

hi MaLdon dear sleep and shutdown still doesn't work

 

DSDT03 test

with ur old files, shutdown work?

  • Like 1

so i have updated from 10.13.3 beta 2 to 3 shutdown work now but sleep still not working

 

dsdt03

What happens with sleep?

 

Micro dont sleep, reboot after wake

i have attached these 2 files from my first patched dsdt and IORegistry 

you can look into the files get an idea why sleep and shutdown working with these files

System sleep and shutdown working .zip

  • Like 1

Hi MaLd0n i hace an Hp z820 with an xeon 2620 v2 and am having problems with ysb 3 and audio, am using voodoo for audio but i would like to use applehda. can you help me out? am uploading my efi and the stuff u said on mega

 

https://mega.nz/#!igkkTBSQ!yEKr79M3A2y6izm6DWgB7UyIWE4oaGycZl2_-1pcxiA

 

thank u

  • Like 1

Hi MaLd0n i hace an Hp z820 with an xeon 2620 v2 and am having problems with ysb 3 and audio, am using voodoo for audio but i would like to use applehda. can you help me out? am uploading my efi and the stuff u said on mega

 

https://mega.nz/#!igkkTBSQ!yEKr79M3A2y6izm6DWgB7UyIWE4oaGycZl2_-1pcxiA

 

thank u

remove voodoohda and applehdadisable.kext, use my folder, reboot and send me new ioreg with new files

CLOVER.zip

usb3 is load in ioreg, dont appears in system profiler, but work, check

remove voodoohda and applehdadisable.kext, use my folder, reboot and send me new ioreg with new files

attachicon.gifCLOVER.zip

usb3 is load in ioreg, dont appears in system profiler, but work, check

 Thanks a lot for ur help here is what u ask

 

https://mega.nz/#!esMFmQab!TBg2UKc3XjVD8CJ1SzLZbSiyXTr5Fx5E7ileF5OxhFE

  • Like 1

yes i used your full folder and usb 3 it is working u are right

update clover bootloader

the files don't loaded

Portuguese, from Brazil :D

 great!!! am from Peru  :P am gonna update clover bootloader, thanks a lot!!!!

usb3 is working but only with flash drives when i connect an external usb drive tuxera gave an error. here are the files with clover update

 

https://mega.nz/#!esMFmQab!TBg2UKc3XjVD8CJ1SzLZbSiyXTr5Fx5E7ileF5OxhFE

  • Like 1

 great!!! am from Peru  :P am gonna update clover bootloader, thanks a lot!!!!

usb3 is working but only with flash drives when i connect an external usb drive tuxera gave an error. here are the files with clover update

 

https://mega.nz/#!esMFmQab!TBg2UKc3XjVD8CJ1SzLZbSiyXTr5Fx5E7ileF5OxhFE

U replçace a ful clover folder? delete old and put new? New files dont load, like DSDT, new intel kext Lan, etc

am so sorry my bad, now am using your clover folder and generate dsdt with f4 on clover bootloader 

 

https://mega.nz/#!esMFmQab!TBg2UKc3XjVD8CJ1SzLZbSiyXTr5Fx5E7ileF5OxhFE

nop

u boot from usb stick?

where u install bootloader?

u install kexts in s/l/e or l/e?

×
×
  • Create New...