MaLd0n Posted June 8, 2019 Author Share Posted June 8, 2019 2 hours ago, Jehoshua said: Having shutdown=restart problem Using iGPU UHD630, no discrete Send me MyiMac.zip DSDT.aml.zip change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2019 Author Share Posted June 8, 2019 Updater First Post *FULL CATALINA SUPPORT* 1 Link to comment Share on other sites More sharing options...
corint1 Posted June 13, 2019 Share Posted June 13, 2019 hi .. try to send files but this error has repeat to infinit IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2019 Author Share Posted June 13, 2019 1 hour ago, corint1 said: hi .. try to send files but this error has repeat to infinit IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) --Run_Me RunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A Link to comment Share on other sites More sharing options...
corint1 Posted June 13, 2019 Share Posted June 13, 2019 18 minutes ago, MaLd0n said: --Run_MeRunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A solve it ... here are files ... thank you Send me Bogdans-iMac-Pro.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2019 Author Share Posted June 13, 2019 37 minutes ago, corint1 said: solve it ... here are files ... thank you Send me Bogdans-iMac-Pro.zip DSDT.aml.zip u dont need a pegp to gfx0 patch, weg.kext rename video device on the fly out tables have a many pegp devices inside many devices like PEG0, PEG1, PEG2 Link to comment Share on other sites More sharing options...
corint1 Posted June 13, 2019 Share Posted June 13, 2019 (edited) 34 minutes ago, MaLd0n said: DSDT.aml.zip u dont need a pegp to gfx0 patch, weg.kext rename video device on the fly out tables have a many pegp devices inside many devices like PEG0, PEG1, PEG2 dont boot ... many errors ... I dont have IGPU ... I have 9900KF ... only Radeon 7 ... Edited June 13, 2019 by corint1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2019 Author Share Posted June 13, 2019 3 hours ago, corint1 said: dont boot ... many errors ... I dont have IGPU ... I have 9900KF ... only Radeon 7 ... send me ur full EFI folder Link to comment Share on other sites More sharing options...
corint1 Posted June 13, 2019 Share Posted June 13, 2019 55 minutes ago, MaLd0n said: send me ur full EFI folder here go EFI.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2019 Author Share Posted June 13, 2019 37 minutes ago, corint1 said: here go EFI.zip replace full EFI, reboot, don't change nothing EFI.zip Link to comment Share on other sites More sharing options...
corint1 Posted June 14, 2019 Share Posted June 14, 2019 14 hours ago, MaLd0n said: replace full EFI, reboot, don't change nothing EFI.zip it looks like it's working ...thank you.... but it does not have sleep / wake ... Link to comment Share on other sites More sharing options...
MaLd0n Posted June 14, 2019 Author Share Posted June 14, 2019 2 hours ago, corint1 said: it looks like it's working ...thank you.... but it does not have sleep / wake ... DSDT.aml.zip check if work use power button for wake Link to comment Share on other sites More sharing options...
corint1 Posted June 14, 2019 Share Posted June 14, 2019 (edited) 3 hours ago, MaLd0n said: DSDT.aml.zip check if work use power button for wake just the button starts ... but the monitor never turns on ... only the reset button resolves the problem ... and the restart starts with the classic message for z390 "press F1 .... blabla" the keypad does not work. The caps look light does not light up Edited June 14, 2019 by corint1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 14, 2019 Author Share Posted June 14, 2019 26 minutes ago, corint1 said: classic message for z390 "press F1 check if solve it config.plist.zip Link to comment Share on other sites More sharing options...
corint1 Posted June 14, 2019 Share Posted June 14, 2019 (edited) 22 minutes ago, MaLd0n said: check if solve it config.plist.zip same thing ... maybe without bios message " pres F1 .... " after restart this is first message 2019-06-14 18:57:36.660283+0300 localhost kernel[0]: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Host (0x01) 2019-06-14 18:57:41.755576+0300 localhost kernel[0]: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Keyboard (0x02) but keyboar not working ... I wait for 5 min ... but monitor rest black ...at begining some activity fron hdd ...in rest death ... Edited June 14, 2019 by corint1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 14, 2019 Author Share Posted June 14, 2019 3 hours ago, corint1 said: 2019-06-14 18:57:36.660283+0300 localhost kernel[0]: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Host (0x01) 2019-06-14 18:57:41.755576+0300 localhost kernel[0]: (AppleTopCaseHIDEventDriver) [HID] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: Keyboard (0x02) cooler with usb cable? Link to comment Share on other sites More sharing options...
corint1 Posted June 14, 2019 Share Posted June 14, 2019 3 minutes ago, MaLd0n said: cooler with usb cable? no ... I dont have any "toy" ... kb & trackpad ... no external drive ...no usb devices ... Link to comment Share on other sites More sharing options...
corint1 Posted June 14, 2019 Share Posted June 14, 2019 KP tells me it's more than a usb device ... I do not know what ... after a little hdd activity hangs, the screen stays black and only the reboot button pulls it out of this state ... and at loading the first message system is KP ... Link to comment Share on other sites More sharing options...
Faradis Posted June 15, 2019 Share Posted June 15, 2019 @MaLd0n hope you help this time like you always did. Send me faradiss-iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 15, 2019 Author Share Posted June 15, 2019 19 hours ago, corint1 said: KP tells me it's more than a usb device ... I do not know what ... after a little hdd activity hangs, the screen stays black and only the reboot button pulls it out of this state ... and at loading the first message system is KP ... no idea 9 hours ago, Faradis said: @MaLd0n hope you help this time like you always did. Send me faradiss-iMac.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
SardusX86 Posted June 19, 2019 Share Posted June 19, 2019 (edited) Hi MaLdOn, I recently installed macOS Mojave 10.14.4 (and now updated to 10.14.5) on my new system: Gigabyte Z390 Designare Intel i9-9900K Sapphire Radeon RX 580 Pulse 8 gb Dell U2410 Clover bootloader UEFI mode, smbios iMac 19.1, Lilu+WhatEverGreen+AppleALC (setting UHD 630 in headless mode via device/properties) <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x1f,0x3)</key> <dict> <key>AAPL,slot-name</key> <string>Built In</string> <key>device_type</key> <string>Audio Controller</string> <key>layout-id</key> <data> EAAAAA== </data> <key>model</key> <string>Realtek ALC1220-VB</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AwCYPg== </data> <key>AAPL,model</key> <string>Intel UHD 630</string> <key>AAPL,slot-name</key> <string>Internal</string> <key>device_type</key> <string>Graphics Processor</string> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> </dict> The problems are: - connecting the monitor (Dell U2410 - DP 1.2) via the RX580 DP port the screen goes black with the message "entering power save mode" after the boot first stage. Turning off and on the monitor the login screen appears normally. Using the DVI-D and the HDMI ports no problem (only with the HDMI port colors seem to be over-saturated, perhaps due to the YPbPr setting) Unfortunately I don't have the possibility to exclude some incompatibility of macOS with the Dell U2410 via the RX 580 DP port. Using an Ubuntu Live USB installer or Windows 10 OS (Multiboot) the monitor seems to work fine via the RX 580 DP port) - the HEVC codec does not seem to be supported with this configuration I tried different smbios/WEG settings but without success, do you think that creating a custom DSDT can solve these problems? Could you help me? Thanks in advance Send me SardusX86-iMac.zip Edited June 19, 2019 by SardusX86 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 20, 2019 Author Share Posted June 20, 2019 13 hours ago, SardusX86 said: Hi MaLdOn, I recently installed macOS Mojave 10.14.4 (and now updated to 10.14.5) on my new system: Gigabyte Z390 Designare Intel i9-9900K Sapphire Radeon RX 580 Pulse 8 gb Dell U2410 Clover bootloader UEFI mode, smbios iMac 19.1, Lilu+WhatEverGreen+AppleALC (setting UHD 630 in headless mode via device/properties) <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x1f,0x3)</key> <dict> <key>AAPL,slot-name</key> <string>Built In</string> <key>device_type</key> <string>Audio Controller</string> <key>layout-id</key> <data> EAAAAA== </data> <key>model</key> <string>Realtek ALC1220-VB</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AwCYPg== </data> <key>AAPL,model</key> <string>Intel UHD 630</string> <key>AAPL,slot-name</key> <string>Internal</string> <key>device_type</key> <string>Graphics Processor</string> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> </dict> The problems are: - connecting the monitor (Dell U2410 - DP 1.2) via the RX580 DP port the screen goes black with the message "entering power save mode" after the boot first stage. Turning off and on the monitor the login screen appears normally. Using the DVI-D and the HDMI ports no problem (only with the HDMI port colors seem to be over-saturated, perhaps due to the YPbPr setting) Unfortunately I don't have the possibility to exclude some incompatibility of macOS with the Dell U2410 via the RX 580 DP port. Using an Ubuntu Live USB installer or Windows 10 OS (Multiboot) the monitor seems to work fine via the RX 580 DP port) - the HEVC codec does not seem to be supported with this configuration I tried different smbios/WEG settings but without success, do you think that creating a custom DSDT can solve these problems? Could you help me? Thanks in advance Send me SardusX86-iMac.zip EFI.zip replace full efi, reboot use only it Link to comment Share on other sites More sharing options...
Giang Long Posted June 20, 2019 Share Posted June 20, 2019 Hi MaLdOn, I installed macOS Mojave 10.14.3 on my PC: Arsock Z370 Pro4 Intel i5-8400 Can you help me config EFI? Thank you very much!Send me Giangs-Mac-mini.zip Link to comment Share on other sites More sharing options...
SardusX86 Posted June 21, 2019 Share Posted June 21, 2019 (edited) On 6/20/2019 at 5:13 AM, MaLd0n said: EFI.zip replace full efi, reboot use only it Thanks, with AptioMemoryFix-64.efi system go Kernel Panic. Replacing it with OsxAptioFix2Drv-free2000.efi system boot but unfortunately DP port problem and unsupported HEVC not are solved Edited June 21, 2019 by SardusX86 Link to comment Share on other sites More sharing options...
ldgiang2003 Posted June 22, 2019 Share Posted June 22, 2019 hi Moderators! I update my PC and install Hackintoush! Can u help me! pls! I run RunMe.app and send my file to you! (so sorry I don't know En) My PC: - CPU: Pentium G4600. - Ram: 16GB - 2400MHz - Main: arosk - B250M-Pro4 - NVME: Samsung 970 evo plus 250GB. - VGA: NVDIA GTX750TI-2GB-OC Thanks u so much!!!!! Send me 123s-iMac.zip Link to comment Share on other sites More sharing options...
Recommended Posts