Jump to content


  • Content Count

  • Joined

  • Last visited

About SardusX86

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

1,707 profile views
  1. I used EFI folder You provided in a Clover Test USB pendrive to boot the system. I should extract the new send_me starting from my original setting or using the EFI folder that You provided?
  2. Do you have AptioMemoryFix-64.efi in /EFI/CLOVER/drivers64UEFI? If yes, you could try replacing it with OsxAptioFix2Drv-free2000.efi in combination with slide=0 boot argument.
  3. Thanks, with AptioMemoryFix-64.efi system go Kernel Panic. Replacing it with OsxAptioFix2Drv-free2000.efi system boot but unfortunately DP port problem and unsupported HEVC not are solved
  4. Hi MaLdOn, I recently installed macOS Mojave 10.14.4 (and now updated to 10.14.5) on my new system: Gigabyte Z390 Designare Intel i9-9900K Sapphire Radeon RX 580 Pulse 8 gb Dell U2410 Clover bootloader UEFI mode, smbios iMac 19.1, Lilu+WhatEverGreen+AppleALC (setting UHD 630 in headless mode via device/properties) <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x1f,0x3)</key> <dict> <key>AAPL,slot-name</key> <string>Built In</string> <key>device_type</key> <string>Audio Controller</string> <key>layout-id</key> <data> EAAAAA== </data> <key>model</key> <string>Realtek ALC1220-VB</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data> AwCYPg== </data> <key>AAPL,model</key> <string>Intel UHD 630</string> <key>AAPL,slot-name</key> <string>Internal</string> <key>device_type</key> <string>Graphics Processor</string> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> </dict> The problems are: - connecting the monitor (Dell U2410 - DP 1.2) via the RX580 DP port the screen goes black with the message "entering power save mode" after the boot first stage. Turning off and on the monitor the login screen appears normally. Using the DVI-D and the HDMI ports no problem (only with the HDMI port colors seem to be over-saturated, perhaps due to the YPbPr setting) Unfortunately I don't have the possibility to exclude some incompatibility of macOS with the Dell U2410 via the RX 580 DP port. Using an Ubuntu Live USB installer or Windows 10 OS (Multiboot) the monitor seems to work fine via the RX 580 DP port) - the HEVC codec does not seem to be supported with this configuration I tried different smbios/WEG settings but without success, do you think that creating a custom DSDT can solve these problems? Could you help me? Thanks in advance Send me SardusX86-iMac.zip
  5. Hi All, I'm trying to build a multiboot system on my new build based on Gigabyte Z390 Designare Intel i9-9900K Sapphire Radeon RX 580 pulse 8 gb Clover bootloader (UEFI mode) I have already installed macOS mojave on a nvme pcie SSD (Samsung 870 EVO 500 gb) on the M.2 M2P connector Later I tried to install Windows 10 PRO on a second nvme pcie SSD (Samsung 970 PRO 512 gb) on the M.2 M2M: - both SSDs nvme pcie connected - UEFI bios: Windows 8/10 Features -> Windows 8/10, CSM Support -> Enabled - created a Windows 10 USB installer with Rufus according to this guide: https://www.windowscentral.com/how-create-windows-10-usb-bootable-media-uefi-support#create_windows10_uefi_rufus - initialized the target nvme pcie SSD (970 PRO) using disk utility (GPT / HFS + journaled) in macOS Mojave - After boot from the Windows 10 USB installer, I deleted the HFS+ partition previously created by disk utility in Mojave (preserving the EFI partition) - selected for Windows 10 installation the unallocated space Unfortunately after the first stage the installation process was interrupted with the error message: "Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation" Restarting the installation process there are the following partition on the target drive: Unit 0 Partition 1: EFI Unit 0 Partition 2: Recovery Unit 0 Partition 3: Unit 0 Partition 4: MSR (Reserved) Unit 0 Partition 2: Primary but it is not impossible to resume the installation trying to format the Primary Partition: "Setup was unable to create a new system partition or locate an existing partition" How can i solve this problem? Thanks in advance for Your help
  6. Ciao, Attualmente ho un sistema multiboot (CLOVER Legacy mode) su 3 drives separati (Windows 10 / macOS Sierra-macOS High Sierra / n distro linux) Adesso ho allestito una nuovo sistema hardware più aggiornato e che supporta UEFI e vorrei riprodurre un sistema simile a partire da 2 x SSD nvme pcie M.2 + 1 x SSD. Ho già installato macOS Mojave su un primo SSD nvme pcie (dividendolo in due partizioni per supportare una successiva versione macOS) e intendo installare Windows 10 sul secondo SSD nvme pcie, mentre vorrei installare n distribuzioni linux su un terso SSD SATA 3 (e forse in seguito aggiungere un quarto drive sempre per varie distribuzioni linux) Quale può essere il modo migliore/consigliato per organizzare l'avvio dei vari S.O. (cioè dove/come è meglio installare i bootloader dei vari S.O., utilizzando CLOVER come master bootloader)? Grazie in anticipo per le indicazioni e i suggerimenti p.s. spero di non essere troppo off-topic
  7. Grazie per il suggerimento, forse è meglio allora che riprenda l'argomento in una delle guide che hai indicato
  8. Ciao a Tutti, Attualmente ho un sistema configurato multiboot (CLOVER Legacy mode) su 3 dischi separati (Windows 10 / macOS Sierra-MacOS High Sierra / n distro linux). Adesso ho allestito una nuovo sistema hardware più aggiornato e che supporta UEFI e vorrei riprodurre un sistema simile a partire da 2 x SSD nvme pcie M.2 + 1 x SSD. Ho già installato macOS Mojave su un primo SSD nvme pcie e intendo installare Windows 10 sul secondo SSD nvme pcie mentre vorrei installare le distribuzioni linux previste su un terso SSD SATA 3 (eventualmente le n distro linux potrebbero essere gestite da GRUB come nel mio sistema attuale): come potrei continuare o dove potrei trovare una qualche guida in proposito per realizzare tale sistema? In particolare, dove è consigliabile installare GRUB durante l'installazione della distribuzione Linux principale? Grazie in anticipo per le vostre indicazioni/suggerimenti
  9. It does not allow me to upload more than 10 mb, despite having deleted the previously loaded folder. Why?
  10. I also sometimes have red and green flashes at boot and, it seems to me, an unusual slowness at startup in the "first stage" (but I could be wrong). I installed a trial version of VideoProc and it seems that the H265/HEVC codec is not supported. What could be the problem?
  11. SardusX86

    Clover Themes

    Hi All, Is this version of the "embedded" Clover theme available for download? Thanks in advance for Your reply
  12. I tried to load a small video of the boot process but it is> 10 mb (even compressing it) and it doesn't allow me to do it. What could I do? In the video you can see that after the text output the monitor has a few seconds of signal failure, then the apple logo and the progress bar resume and then the login screen appears: is it normal?
  13. I regenerated the iMac19.1 smbios section in the Clover Configurator: same error at boot "Reason: Mac - AA95B1_____________" Should I change this parameter? How?
  14. Maybe I didn't understand anything: I'm using the smbios settings in your CLOVER folder (iMac19.1) So should I use those settings only after upgrading to macOS 10.14.5?
  15. Removing WEG and all data from devices->properties and setting ig-platform-it as 0x3E980003 in graphics (Inject Intel, Inject ATI unselected) the boot is slower but login screen resume after some seconds of black screen. Can it be improved in any way? How could I verify that the internal UHD iGPU is working properly in headless mode and also check that h.265 / HEVC are supported ?