eSaF Posted May 30, 2019 Share Posted May 30, 2019 Hi MaLd0n thank you very much for your time and effort, I am still having a problem with Sleep/Wake - 'Wake Reason: XDCI' - but no need to stress as you've cleaned up my DSDT much better than my feeble effort and also correctly populated and displayed my PCI list. By way of gratitude I have sent you a donation so that you can indulge and enjoy your favourite beverage. Thanks again much appreciated. Link to comment Share on other sites More sharing options...
eSaF Posted May 30, 2019 Share Posted May 30, 2019 Good news !!!!!! After doing a bit of poking around I found the definite cause of my - 'Wake Reason: XDCI' - (Sleep/Wake). It's my Wifi/Bluetooth card, not the inbuilt one which is useless for OS X, but the one I installed which is supposedly compatible for a Hackintosh. I will now try to source a genuine Apple Card to insure correct operation, so I am open to all recommendations for such a card and where from. Thanks. Link to comment Share on other sites More sharing options...
eSaF Posted May 30, 2019 Share Posted May 30, 2019 Ok peeps hold off on the recommendations I found a card from my Sierra days (and the wife keeps nagging when are you going to get rid of all this junk you're not using?) made a few alterations and wallah!!!! all is well she sleeps like a new born . Will be testing over the coming days but I am confident problem solved. The strange thing is, the card I just took out works perfect apart from preventing the rig from sleeping had 3 antennas, the one I just adapted and installed has 4 so go figure. Needless to say problem solved. Link to comment Share on other sites More sharing options...
augustopaulo Posted June 1, 2019 Share Posted June 1, 2019 Olá Maldon! Bom dia/good morning! Changed my system recently to: Motherboard: Gigabyte AORUS Z390 Xtreme, with latest BIOS F5 (link) CPU: Intel i9900K Graphics card: Sapphire Vega VII 16MB Bluetooth/Wifi: ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express BCM943602CS Still own: PSU: Corsair HX1000i, with USB header connected on IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/XHC@14/XHC@14000000/HS13@14d00000 AIO CPU cooler: Corsair H110i GTX, with USB header also connected to above Firewire: Firewire Card 800 Installed 10.4.4 (then update to 10.4.5) following mostly this guide. For CPU Power management, the BIOS 0xE2 MSR register is unlocked (followed this guide) Issues: I've followed a guide to get my USB ports under 15, but I think all my SSxx ports are not working at their highest speeds and I'm not charging my iPad at its highest current - Can you please fix all of them on new DSDT? Sleep only works if I unplug the USB headers of PSU & AIO CPU cooler - Can you please disable them on new DSDT? Sometimes I get random sudden reboots on 10.4.5... Power button doesn't power off PC... Slow boot... Sound works perfectly if starting from cold boot. If rebooting to macOS from windows, sound does't work - Is this fixable ? Do you need my BIOS screenshots/selections ? I've attached my Clover F4 ACPI files capture at boot and the sendme files also. Can you please compile me an SSDT that also tackles my above issues ? Muito Obrigado/Thanks a lot - "Beer" donated!! Paulo Send me Paulos-iMac-Pro.zip origin.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 1, 2019 Author Share Posted June 1, 2019 6 hours ago, augustopaulo said: Changed my system recently to: Motherboard: Gigabyte AORUS Z390 Xtreme, with latest BIOS F5 (link) CPU: Intel i9900K Graphics card: Sapphire Vega VII 16MB Bluetooth/Wifi: ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express BCM943602CS replace full EFI, reboot EFI.zip 1 Link to comment Share on other sites More sharing options...
dtpro Posted June 1, 2019 Share Posted June 1, 2019 (edited) Hi MaLd0N, Can you please help me to patch my DSDT in attached file. This is my first post in this forum so please tell me if you need any further information. I got instant wake after sleep and my PCIs are empty. Thanks so much. Send me dtpro.zip Edited June 1, 2019 by dtpro Link to comment Share on other sites More sharing options...
MaLd0n Posted June 1, 2019 Author Share Posted June 1, 2019 1 hour ago, dtpro said: Hi MaLd0N, Can you please help me to patch my DSDT in attached file. This is my first post in this forum so please tell me if you need any further information. I got instant wake after sleep and my PCIs are empty. Thanks so much. Send me dtpro.zip DSDT.aml.zip 1 1 Link to comment Share on other sites More sharing options...
dtpro Posted June 2, 2019 Share Posted June 2, 2019 (edited) 7 hours ago, MaLd0n said: DSDT.aml.zip Dear MaLd0n, Thanks so much for your effort, after applying your DSDT patches, everything works fine except the sleep is still the same (instant wake), and the screen is flickering sometimes. I checked the syslog and the Wake reason is: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC Can you please give me a solution for this? My laptop is: Acer Predator Helios 300 G3-572-79S6. I don't know maybe it is involved in SSDT (I'm not expert). Thanks so much. Beer donated. Send me dtpro_updated.zip Edited June 2, 2019 by dtpro Link to comment Share on other sites More sharing options...
Matgen84 Posted June 2, 2019 Share Posted June 2, 2019 Hi MaLd0N, Can you please help me to patch my original DSDT in attached file. My new hack under construction: MB: Asus Prime Z390-A CPU: i7 9700K CG: MSI Radean RX580 Armor 8Go RAM: Corsair Vengeance LPX 3000Mhz (2x8Go) For USB3 type A and type C, I want follow your guide Here in Olarilla.I extract original DSDT/SSDT, but I doesn't find SSDT for USBs Thanks in advance for your great job. DSDT.aml Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2019 Author Share Posted June 2, 2019 5 hours ago, Matgen84 said: Hi MaLd0N, Can you please help me to patch my original DSDT in attached file. My new hack under construction: MB: Asus Prime Z390-A CPU: i7 9700K CG: MSI Radean RX580 Armor 8Go RAM: Corsair Vengeance LPX 3000Mhz (2x8Go) For USB3 type A and type C, I want follow your guide Here in Olarilla.I extract original DSDT/SSDT, but I doesn't find SSDT for USBs Thanks in advance for your great job. DSDT.aml replace full EFI, reboot, goto bios/uefi setup, Advanced/System Agent (SA) Configuration/Graphics Configuration, Enable iGPU Multi-Monitor and set Primary Display to PEG EFI.zip boot into system and run app for more patches --Run_Me RunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2019 Author Share Posted June 2, 2019 8 hours ago, dtpro said: Dear MaLd0n, Thanks so much for your effort, after applying your DSDT patches, everything works fine except the sleep is still the same (instant wake), and the screen is flickering sometimes. I checked the syslog and the Wake reason is: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC Can you please give me a solution for this? My laptop is: Acer Predator Helios 300 G3-572-79S6. I don't know maybe it is involved in SSDT (I'm not expert). Thanks so much. Beer donated. Send me dtpro_updated.zip here DSDT.aml.zip use power button for wake 1 1 Link to comment Share on other sites More sharing options...
dtpro Posted June 2, 2019 Share Posted June 2, 2019 (edited) 34 minutes ago, MaLd0n said: here DSDT.aml.zip use power button for wake You are the man, thanks so much. Everything works fine now, I even can wake my system by keyboard (except by mouse). One more thing, my laptop is dual GPUs (Intel hd630 & gtx 1060, optimus technology I think), so I can only use Intel GPU, right? No way to active Nvidia card? Have a nice day. Cheers. Edited June 2, 2019 by dtpro Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2019 Author Share Posted June 2, 2019 11 minutes ago, dtpro said: You are the man, thanks so much. Everything works fine now, I even can wake my system by keyboard (except by mouse). One more thing, my laptop is dual GPUs (Intel hd630 & gtx 1060, optimus technology I think), so I can only use Intel GPU, right? No way to active Nvidia card? Have a nice day. Cheers. no way, need use intelHD only xD 2 Link to comment Share on other sites More sharing options...
Matgen84 Posted June 2, 2019 Share Posted June 2, 2019 (edited) 1 hour ago, MaLd0n said: replace full EFI, reboot, goto bios/uefi setup, Advanced/System Agent (SA) Configuration/Graphics Configuration, Enable iGPU Multi-Monitor and set Primary Display to PEG EFI.zip boot into system and run app for more patches --Run_MeRunMe.app Here Send Me file in attachment. My new hack under construction: MB: Asus Prime Z390-A CPU: i7 9700K CG: MSI Radean RX580 Armor 8Go RAM: Corsair Vengeance LPX 3000Mhz (2x8Go) For USB3 type A and type C, I want follow your guide in Olarilla. But I doesn't find SSDT for USBs Send me iMac-de-Mathieu.zip Edited June 2, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2019 Author Share Posted June 2, 2019 13 minutes ago, Matgen84 said: Here Send Me file in attachment. My new hack under construction: MB: Asus Prime Z390-A CPU: i7 9700K CG: MSI Radean RX580 Armor 8Go RAM: Corsair Vengeance LPX 3000Mhz (2x8Go) For USB3 type A and type C, I want follow your guide in Olarilla. But I doesn't find SSDT for USBs Send me iMac-de-Mathieu.zip Arquivo Comprimido.zip check ssdt, looks good, check if shutdown/restart. nvram, etc work fine 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted June 2, 2019 Share Posted June 2, 2019 (edited) 39 minutes ago, MaLd0n said: Arquivo Comprimido.zip check ssdt, looks good, check if shutdown/restart. nvram, etc work fine Thanks Panic randomly at restart (see picture below) I doesn't remember how to check NVRAM work correctly. In "About my mac" System report: what means PCI "Patched byMaLdOn" not installed Sorry for my bad english Edited June 2, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2019 Author Share Posted June 2, 2019 22 minutes ago, Matgen84 said: Thanks Panic randomly at restart (see picture below) I doesn't remember how to check NVRAM work correctly. In "About my mac" System report: what means PCI "Patched byMaLdOn" not installed Sorry for my bad english DSDT.aml.zip u can try with fakesmc instead virtualsmc and use a release kexts, i put compiled debug version 2 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2019 Author Share Posted June 3, 2019 9 hours ago, Matgen84 said: Thanks Panic randomly at restart (see picture below) try it for intel quick sync, is a correct value from iMac19,1 IntelGFX 0x3E928086 ig-platform-id 0x3E920003Check InjectIntelshikigva=60 2 Link to comment Share on other sites More sharing options...
Matgen84 Posted June 3, 2019 Share Posted June 3, 2019 (edited) 10 hours ago, MaLd0n said: try it for intel quick sync, is a correct value from iMac19,1 IntelGFX 0x3E928086 ig-platform-id 0x3E920003Check InjectIntelshikigva=60 Thanks a lot EDIT: same issue at first restart What do you think of that: on Clover Topic, Slice said: "Chipset 390 has no support for real NVRAM even with AptioMemoryFix. You have to install EmuVariableUefi-64.efi." Question: macOS display "Intel 11 series chipset" without DSDT, "Intel 10 series chipset" with DSDT. What it means, I don't understand: Patched bt MaLdOn - olarila.com -->No--->Built In Edited June 3, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2019 Author Share Posted June 3, 2019 6 hours ago, Matgen84 said: Thanks a lot EDIT: same issue at first restart What do you think of that: on Clover Topic, Slice said: "Chipset 390 has no support for real NVRAM even with AptioMemoryFix. You have to install EmuVariableUefi-64.efi." Question: macOS display "Intel 11 series chipset" without DSDT, "Intel 10 series chipset" with DSDT. What it means, I don't understand: Patched bt MaLdOn - olarila.com -->No--->Built In don't need EmuVariableUefi-64.efi, ur nvram work now, i think the problem is about weg or virtualsmc or clover or about intel quick sync, try without intelHD enable for check if work, the problem appears in boot from system need investigate use it to solve sata 10 series DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted June 3, 2019 Share Posted June 3, 2019 (edited) 43 minutes ago, MaLd0n said: don't need EmuVariableUefi-64.efi, ur nvram work now, i think the problem is about weg or virtualsmc or clover or about intel quick sync, try without intelHD enable for check if work, the problem appears in boot from system need investigate use it to solve sata 10 series DSDT.aml.zip I think too for EmuvariableUefi-64.efi. Except at first boot, no problem now. I will try the new DSDT. And report. Thanks for your help EDIT: Replace DSDT in EFI Folder, Panic again at first restart. Maybe cause by VirtualSMC. I will use FakeSMC instead. Edited June 3, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2019 Author Share Posted June 3, 2019 16 minutes ago, Matgen84 said: I think too for EmuvariableUefi-64.efi. Except at first boot, no problem now. I will try the new DSDT. And report. Thanks for your help EDIT: Replace DSDT in EFI Folder, Panic again at first restart. Maybe cause by VirtualSMC. I will use FakeSMC instead. take one shot with emuvariable let me know Link to comment Share on other sites More sharing options...
Matgen84 Posted June 3, 2019 Share Posted June 3, 2019 28 minutes ago, MaLd0n said: take one shot with emuvariable let me know Test: Copy again DSDT in EFI folder Use VirtualSMC.kext, EmuVariableUEFI----> No problem at first restart Copy again DSDT in EFI folder Use VirtualSMC.kext, don't use EmuVariableUEFI----> No problem at first restart I can't reproduce the problem. Maybe is randomly issue? I don't know Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2019 Author Share Posted June 3, 2019 1 hour ago, Matgen84 said: Test: Copy again DSDT in EFI folder Use VirtualSMC.kext, EmuVariableUEFI----> No problem at first restart Copy again DSDT in EFI folder Use VirtualSMC.kext, don't use EmuVariableUEFI----> No problem at first restart I can't reproduce the problem. Maybe is randomly issue? I don't know ye, random u try without IGPU enable? Link to comment Share on other sites More sharing options...
Matgen84 Posted June 4, 2019 Share Posted June 4, 2019 14 hours ago, MaLd0n said: ye, random u try without IGPU enable? Test without IGPU enable----> No problem for the moment. Very strange this random issue. Link to comment Share on other sites More sharing options...
Recommended Posts