Jump to content
5451 posts in this topic

Recommended Posts

Clover ok, but after select sierra i show the scrolling text and black screen

 

Found a solution : need to uncheck use nvidia web driver.

 

PS: can i delete lilu.kext ? 

  • Like 1

No

 

but i think in 10.12.6 have a full support for kabylake in iMac18

 

High Sierra done ;)

  • Like 1

Hi, I just started to work on my first custoMac.

It seems that I can only wait for the new update version?
 

I have followed the guide, but never being able to reach the os installer window, it gonna stuck on Apple logo screen

Edited by gengik84
Removed link
  • Like 1

Hi, I just started to work on my first custoMac.

It seems that I can only wait for the new update version?

 

I have followed the guide, but never being able to reach the os installer window, it gonna stuck on Apple logo screen

 

Tonymac's tools are not supported here

See rules...

Follow carefully the MaLd0n's guide 

 

It's good !  ;)
  • Like 1

Hi, I just started to work on my first custoMac.

It seems that I can only wait for the new update version?

 

I have followed the guide, but never being able to reach the os installer window, it gonna stuck on Apple logo screen

Use Flash Disk Maker to create Installer or Olarila 10.12.5 image, with Olarila u can burn in Windows, dont need Osx to create a USB Stick

  • Like 2

Followed MaLd0n's guide to create the USB stick successfully until the step `Replace with my Clover folder`  

 

Tried to boot with the usb stick, but after a short black screen, the system will jump into the BIOS setup.

I didn't use VoodooTSCSync.kext. Not sure it's necessary or not. Did I miss anything else? 

  • Like 1

MaLd0n:

 

Sadly, after replace the CLOVER folder with your version, I still encountered the same situation.

Except replace the clover folder, anything else?

 

The clover version I installed in the usb stick is v2.4_r4077, which is different from what I saw during the usb stick making procedure (it seems to be r4045), any possible effect for that?
 

 

 

For BIOS setting, I reset the BIOS setting to Default, then do the following

VT-d : Disabled

Serial port : Disabled

XHCI Hand-off : Enabled

Eventually Got it through with other solution, still appreciate your kindly help. :D

 

What works now with my machine:

Basic install of Sierra, wifi (2.4GHz only), using intel graphic

  • Like 1

Hello MaLd0n.

I was hoping you could help me out with my DSDT. I have tried on my own but not succeeded 100%.

Hardware:

Asus F556UA-DM805T (laptop)
Intel Core i5-7200U (Kaby Lake)
Intel HD 620 · 8GB DDR4 RAM
128GB SSD + 1TB HDD
MacOS 10.12

 

https://www.dropbox.com/s/mjkaud2vyuaekby/Send%20me%20Andreas%20Hackintosh.zip?dl=0

https://www.dropbox.com/s/mptmydlyptz42lr/Andreas%20Hackintosh.ioreg?dl=0

https://www.dropbox.com/s/vwhjwgs8nghsiud/CLOVER.zip?dl=0

 

If you could tell me what patches you used and also give me the patched/unpatched dsl-files (for learning purposes) that would be awesome :)

Also if I have any strange settings in my config.plist please tell me.

 

 

Thank you!

  • Like 1

Hello MaLd0n.

I was hoping you could help me out with my DSDT. I have tried on my own but not succeeded 100%.

 

Hardware:

 

Asus F556UA-DM805T (laptop)

Intel Core i5-7200U (Kaby Lake)

Intel HD 620 · 8GB DDR4 RAM

128GB SSD + 1TB HDD

MacOS 10.12

 

https://www.dropbox.com/s/mjkaud2vyuaekby/Send%20me%20Andreas%20Hackintosh.zip?dl=0

https://www.dropbox.com/s/mptmydlyptz42lr/Andreas%20Hackintosh.ioreg?dl=0

https://www.dropbox.com/s/vwhjwgs8nghsiud/CLOVER.zip?dl=0

 

If you could tell me what patches you used and also give me the patched/unpatched dsl-files (for learning purposes) that would be awesome :)

Also if I have any strange settings in my config.plist please tell me.

 

 

Thank you!

Check

CLOVER.zip

Chipset is serie 20 or 10?

×
×
  • Create New...