Jump to content

[AMD] OS X El Capitan (10.11) Kernel Testing & Release (for help use the Help Topic)


spakk
 Share

1,255 posts in this topic

Recommended Posts

 

at last! I can now reach to the installer, thanks :D

but now the problem is, my mouse stuck on the left corner so I can't continue to install. my keyboard is working :wallbash:

 

:)

 

createhddinstaller with small partition hdd (sata) ;)

  • Like 1
Link to comment
Share on other sites

Hi ! 
I installed on real iMac system_10.11 with this my kernel on hdd-wd! This works without problems USB and without symbols on _xcpm_bios_mbox_cmd_read(write) ! 

 

Ok then i use this hdd-wd and insert on AMD FX 8150 , then run 10.11 and works without problems desktop and without artifacts ! WHY ? )))

But i get problem SYMBOLS and USB on AMD  !

post-31928-0-03057700-1450447267_thumb.png

  • Like 3
Link to comment
Share on other sites

hmmm, if i gets green icons , now i get's problems:

don't works flash player and etc ! 

If no problem icons , normal works flash player ! 

It is secret ? )))

or problem by symbols _xcpm_bios_mbox_read ?

 

P.S. problem errors AppleUSBEHCI now no show and cleared , because i use kexts USBInjectAll.kext and DummyUSBEHCIPCI.kext and works for me . But, usb flash don't works (.

  • Like 2
Link to comment
Share on other sites

I have come a little further . :) ...does anyone know this problem? see picture

hfs: set VeryLowDisk: vol:untitled, freeblks:0, dangerlimit:12

I use Enoch bootloader Vers.2795

 

that has nothing to do with the amd kernel, but what may be the cause?

20151218_201227.jpg

Link to comment
Share on other sites

 

I have come a little further . :) ...does anyone know this problem? see picture
hfs: set VeryLowDisk: vol:untitled, freeblks:0, dangerlimit:12
I use Enoch bootloader Vers.2795
 
that has nothing to do with the amd kernel, but what may be the cause?

 

yes, I have the same with installer.

check your usb drive in disk utility. it should be corrupted. repair and error will gone away.

  • Like 1
Link to comment
Share on other sites

:)

 

problem patch ACPI for UEFI MB   :moil:

:) 


:)

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>KernelBooter_kexts</key>
<string>Yes</string>
<key>KernelPm</key>
<string>Yes</string>
<key>CsrActiveConfig</key>
<string>103</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1 npci=0x2000 rootless=0 nvda_drv=1</string>
</dict>
</plist>
  • Like 1
Link to comment
Share on other sites

yes, I have the same with installer.

check your usb drive in disk utility. it should be corrupted. repair and error will gone away.

 

I check the USB drive 

 

need write flag CsrActiveConfig=103 and this works . 

 

This entry is located in the org.chameleon.boot.plist,

Link to comment
Share on other sites

 

:)

 

problem patch ACPI for UEFI MB   :moil:

:)

:)

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>KernelBooter_kexts</key>
<string>Yes</string>
<key>KernelPm</key>
<string>Yes</string>
<key>CsrActiveConfig</key>
<string>103</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1 npci=0x2000 rootless=0 nvda_drv=1</string>
</dict>
</plist>

 

 

No !

 

The following keys have to be in a kernel.plist file, not in the org.chameleon.Boot.plist ! They're separated files and they have to be both in the Extra folder.

<key>KernelBooter_kexts</key>
<string>Yes</string>
<key>KernelPm</key>
<string>Yes</string>

Also, you don't need this :

<key>KernelPm</key>
<string>Yes</string>

Same for rootless=0 which is useless and does nothing at all :).

 

BTW, kext-dev-mode=1 is also useless with El Capitan.

  • Like 2
Link to comment
Share on other sites

Hi everyone i just get this error when i try the install el capitan 10.11.2 usinh cluver efi: ..."Unable to find driver for this platform: \"ACPI\".\n"@/Users/rootrootFXr1/Desktop/Kernel/Kernel.10.11.0.FX/xnu-3247.1.106/iokit/Kernel/IOPlatformExpert.cpp:1623

Debugger called: <panic>

 

I solved this error before and i don't remember how i pass this, help me please.

 

System: amd fx 6100 cpu, msi 970 gaming motherboard, gt630 graphics

Link to comment
Share on other sites

No !

 

The following keys have to be in a kernel.plist file, not in the org.chameleon.Boot.plist ! They're separated files and they have to be both in the Extra folder.

<key>KernelBooter_kexts</key>
<string>Yes</string>
<key>KernelPm</key>
<string>Yes</string>

Also, you don't need this :

<key>KernelPm</key>
<string>Yes</string>

Same for rootless=0 which is useless and does nothing at all :).

 

BTW, kext-dev-mode=1 is also useless with El Capitan.

 

no ;) 

Link to comment
Share on other sites

No !

 

The following keys have to be in a kernel.plist file, not in the org.chameleon.Boot.plist ! They're separated files and they have to be both in the Extra folder.

<key>KernelBooter_kexts</key>
<string>Yes</string>
<key>KernelPm</key>
<string>Yes</string>

Also, you don't need this :

<key>KernelPm</key>
<string>Yes</string>

Same for rootless=0 which is useless and does nothing at all :).

 

BTW, kext-dev-mode=1 is also useless with El Capitan.

I know my org.chameleon.boot.plist and kernel.plist are correct as you have described above. I have another problem.

 

Do you have CsrActiveConfig=103 or

 

CsrActiveConfig
103

 

Jep (yes) ;-)

Link to comment
Share on other sites

USB Installer

 

Is it the installer your booting spakk? I had those launchd errors on my installer and it wouldn't boot. I've still never booted the installer. I used El Capitan HD from Yosemite to install then it booted fine.

Yes, I use the USB installer. Do you think that it is better to try with El Capitan hdd.app ?

Link to comment
Share on other sites

USB Installer

 

Yes, I use the USB installer. Do you think that it is better to try with El Capitan hdd.app ?

 

Yes I would defiantly give it a try. As I said I've been unable to boot the Installer with any kernel so far.

  • Like 1
Link to comment
Share on other sites

tomorrow i am going install El Capitan with the app.


which el capitan version you have used for the first time ? I have here the GM version and the 10.11.0 version.

 

I could also try an upgrade on one of my Yosemite partition . .. but I do not know if that will work?

  • Like 1
Link to comment
Share on other sites

tomorrow i am going install El Capitan with the app.

which el capitan version you have used for the first time ? I have here the GM version and the 10.11.0 version.

 

I could also try an upgrade on one of my Yosemite partition . .. but I do not know if that will work?

 

I used 10.11.2 Final from the App Store. Install to a second HDD first to see if it works then you can try upgrade.

Link to comment
Share on other sites

It is secret ? )))

or problem by symbols _xcpm_bios_mbox_read ?

 

 

 

It's possible but I highly doubt it, and here are why?

1.  Intel hackintosh runs fine with compiled Vanilla kernel without any issues that we have on AMD.  The compiled Vanilla kernel also have those symbolic errors but no crashes on Intel.

2.  My modified AMD kernel with those symbolic errors runs great on Intel hackintosh, but has crashing issues on AMD.

 

Some of the crashes in my older kernel versions, in Andy's current GitHub version, and I suspected in Tora's kernel are directly attributable to the OPEMU.  The remaining crashes seem to be universal for all AMD kernels.  What do all AMD kernels have in common?  OPEMU or something else?

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...