spakk Posted December 16, 2013 Share Posted December 16, 2013 (edited) I followed your instructions, i dont have a problem with setting ACHi mode or order of boot. Here is the error messages. Hope its clear enough. http://imageshack.com/a/img14/1866/d5dr.jpg Install NullpowerManagement and FakeSMC.kext in to Extra / Extensions / folder remove ApplePowerManagement from system /library/ extensions / then boot using the boot flag as above, but with the additional boot -f, then you're on target good luck! Edited December 16, 2013 by spakk Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976159 Share on other sites More sharing options...
Annold Posted December 17, 2013 Share Posted December 17, 2013 no, but I use os x 10.9. How can I fix USB? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976604 Share on other sites More sharing options...
Gismo Posted December 17, 2013 Share Posted December 17, 2013 Try in your Bootloader USBBusFix=Yes ----> Chameleon Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976605 Share on other sites More sharing options...
ADHDMedia Posted December 17, 2013 Share Posted December 17, 2013 Hey guys… anyone know if the 10.9.1 update is safe with the latest kernels? If so, should we stick to combo updates, or update via AppStore? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976615 Share on other sites More sharing options...
Shaneee Posted December 17, 2013 Share Posted December 17, 2013 Hey guys… anyone know if the 10.9.1 update is safe with the latest kernels? If so, should we stick to combo updates, or update via AppStore? Safe to update. The 10.9.1 update does not include a kernel so you don't need to replace it Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976621 Share on other sites More sharing options...
Annold Posted December 17, 2013 Share Posted December 17, 2013 How can I install 10.9.1? manually from the apple page? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976631 Share on other sites More sharing options...
tragediana150 Posted December 17, 2013 Share Posted December 17, 2013 How can I install 10.9.1? manually from the apple page? You can install it by the AppStore clicking Update or you can download this pack and install it manually http://support.apple.com/kb/DL1707 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976633 Share on other sites More sharing options...
Annold Posted December 17, 2013 Share Posted December 17, 2013 I get a kp on my fx6100 after install 10.9.1. How can I fix this? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976662 Share on other sites More sharing options...
ADHDMedia Posted December 18, 2013 Share Posted December 18, 2013 Safe to update. The 10.9.1 update does not include a kernel so you don't need to replace it ..updated safely Thanks bro. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976748 Share on other sites More sharing options...
Annold Posted December 18, 2013 Share Posted December 18, 2013 Latest v4 kernel don't work on FX cpu with os x 10.9.1. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976774 Share on other sites More sharing options...
Konner Posted December 18, 2013 Share Posted December 18, 2013 Latest v4 kernel don't work on FX cpu with os x 10.9.1. I'm on 10.9.1 and everythings working fine on my FX 8350. I wonder why its not working with your FX processor. and that kernel panic looks to be because of voodoohda, instead of the kernel. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976776 Share on other sites More sharing options...
Annold Posted December 18, 2013 Share Posted December 18, 2013 I'm on 10.9.1 and everythings working fine on my FX 8350. I wonder why its not working with your FX processor. and that kernel panic looks to be because of voodoohda, instead of the kernel. I can't fix this? Do you use the v4 kernel? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976788 Share on other sites More sharing options...
spakk Posted December 18, 2013 Share Posted December 18, 2013 Remove voodoohda.kext from system/library /extensions and boot with -f Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976792 Share on other sites More sharing options...
Annold Posted December 18, 2013 Share Posted December 18, 2013 I delete applehda and the kp is gone Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976865 Share on other sites More sharing options...
gils83 Posted December 18, 2013 Share Posted December 18, 2013 I delete applehda and the kp is gone why chipset sound ? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976889 Share on other sites More sharing options...
spakk Posted December 18, 2013 Share Posted December 18, 2013 I delete applehda and the kp is gone The reason why you had a kernel panic you get that you have previously installed the VoodooHDA and during the update to 10.9.1 AppleHDA which was also installed Two hardware driver provides kernel panic. That is the reason why you get voodoo extensions in backtrace as kernel panic. ?? why chipset sound ? It is important that you read the kernel panic right. Basically, always install one hardware driver. Never two similar drivers . ? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1976891 Share on other sites More sharing options...
farscaper1 Posted December 19, 2013 Share Posted December 19, 2013 hello guys i made alot of progress and this is the error i get now boot flags i used were, npci=0x2000 BusRatio=20 GraphicsEnabler=No -v -f Used myhack to prepare the usb installation. My rig Amd FX 8350 , 990fx 16gb of ram HD radeon 7870 1 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977035 Share on other sites More sharing options...
Konner Posted December 19, 2013 Share Posted December 19, 2013 hello guys i made alot of progress and this is the error i get now boot flags i used were, npci=0x2000 BusRatio=20 GraphicsEnabler=No -v -f Used myhack to prepare the usb installation. My rig Amd FX 8350 , 990fx 16gb of ram HD radeon 7870 I have the same hardware and it boots with npci=0x3000 -v with no other boot flags. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977037 Share on other sites More sharing options...
farscaper1 Posted December 19, 2013 Share Posted December 19, 2013 I have the same hardware and it boots with npci=0x3000 -v with no other boot flags. I still get the same problem, i tried npci-0x3000, and i had to do GraphicsEnabler=No, because it would not boot up to the installation screen. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977040 Share on other sites More sharing options...
ADHDMedia Posted December 19, 2013 Share Posted December 19, 2013 Is this kernel related? Got this message when trying to launch Pro Tools 11. Not sure if it's the kernel or if my processor actually doesn't support SSSE3 LOL Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977043 Share on other sites More sharing options...
ADHDMedia Posted December 19, 2013 Share Posted December 19, 2013 Your CPU doesn't, the devs have tried to emulate as much as possible but some apps have their own SSSE3 checks. Favour for anyone with Xcode to test please, too many mix of different Xcode's & cmdtools on my side... Uploading a xnu-builder with git clone from sinetek's. Damn. Mavs doesn't support Pro Tools 9, and 11 is telling me this now… Wonder if I can still get a legit copy of 10 somewhere? Wonder if it works with Mavs? Alas, this isn't the place for such questions lol just thinking out loud. Thanks guys. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977053 Share on other sites More sharing options...
Duran Keeley Posted December 19, 2013 Share Posted December 19, 2013 Damn. Mavs doesn't support Pro Tools 9, and 11 is telling me this now… Wonder if I can still get a legit copy of 10 somewhere? Wonder if it works with Mavs? Alas, this isn't the place for such questions lol just thinking out loud. Thanks guys. Try a trial from Avid's website first. Google is your friend http://secure.avid.com/services/avid/kb/downloads.cfm?digiArticleId=43812 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977055 Share on other sites More sharing options...
ADHDMedia Posted December 19, 2013 Share Posted December 19, 2013 Try a trial from Avid's website first. Google is your friend http://secure.avid.com/services/avid/kb/downloads.cfm?digiArticleId=43812 Yessir, found that pretty much right after posting. Running the installer now, if anyone is interested in the results I can let u guys know. If u guys wanna move this to the Help Topic that's cool too. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977056 Share on other sites More sharing options...
spakk Posted December 19, 2013 Share Posted December 19, 2013 hello guys i made alot of progress and this is the error i get now boot flags i used were, npci=0x2000 BusRatio=20 GraphicsEnabler=No -v -f Used myhack to prepare the usb installation. My rig Amd FX 8350 , 990fx 16gb of ram HD radeon 7870 you've made progress, that makes me happy. now you are nearing your destination make with Disk Utility your USB stick, it may be that create an error when the USB stick is been created from myhack. further suppose that extra folder of gils ( see here #1711 and here #1721 as a base and add your chameleon.boot.plist into the extra folder. then boats with the usb-stick. then your installation should work good luck! Is this kernel related? Got this message when trying to launch Pro Tools 11. Not sure if it's the kernel or if my processor actually doesn't support SSSE3 LOL have you installed the latest update for protools? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977066 Share on other sites More sharing options...
ADHDMedia Posted December 19, 2013 Share Posted December 19, 2013 Yes. I've tried Pro Tools 9,10 and 11 now, finally got 10 to run but ran into an iLok authorization issue. I thought I wouldn't need it to run a trial version, but I guess you do. My buddy needs some help recovering some old Pro Tools projects, and I run Logic in my studio, so I figured I'd just install Pro Tools long enough to bounce his projects and call it a day, but I guess it's not gonna be that easy. I certainly don't plan on buying a $700 license just to run the software for an afternoon LOL If anyone knows a way to run Pro Tools 10 without an iLok, I'd be very interested. Thanks guys! Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/73/#findComment-1977070 Share on other sites More sharing options...
Recommended Posts