kuruu Posted September 10, 2019 Share Posted September 10, 2019 hello. I just been looking into getting NVRAM working on my ASRock Z390 board. I have read a lot of posts that it is still not supported natively and likely will not be.  My question is about the emulation of NVRAM. I have tried with AptioMemoryFix and EmuVariable and no dice. Boots fine with and without these, but nvram variables don't stick.  I just noticed however that in the latest clover installer there is no AptioMemoryFix anymore. I can only see OsxAptioFixDrv and OsxAptioFix3Drv. Is it deprecated? What is the the latest advice on getting emulated NVRAM going?  Cheers Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689437 Share on other sites More sharing options...
Slice Posted September 10, 2019 Share Posted September 10, 2019 8 hours ago, vector sigma said: right, but I made it to pull keeping my changes. I'll remove that option as I can do it just by hand.  exporting WORKSPACE  from  ebuild.sh, from the gith version firstly, will cause $WORKSPACE to be the same in git if or when you will switch to the svn one from the same Terminal session. Unless you want to totally override Conf/BuildEnv.sh, but then you have to export EDK_TOOLS_PATH adding also Darwin-x86_64 to $PATH. There are different Conf/ folders. As well as different BaseTools folders. Why these two project will interfere?  3 hours ago, kuruu said: hello. I just been looking into getting NVRAM working on my ASRock Z390 board. I have read a lot of posts that it is still not supported natively and likely will not be.  My question is about the emulation of NVRAM. I have tried with AptioMemoryFix and EmuVariable and no dice. Boots fine with and without these, but nvram variables don't stick.  I just noticed however that in the latest clover installer there is no AptioMemoryFix anymore. I can only see OsxAptioFixDrv and OsxAptioFix3Drv. Is it deprecated? What is the the latest advice on getting emulated NVRAM going?  Cheers You still may use AptioMemoryFix as well as OsAptioFixDrv or OsAptioFix3Drv what is better for you. None of them gives you working NVRAM on Z390 boards. Thanks to American Megatrend Incorporation. What to do in the case of Clover bootloader? Install EmuVariableUefi.efi into drivers/UEFI/ folder. Install rc.scripts provided with Clover package. In this case you will have almost all needed Nvram variables writable except variables with non-Apple GUIDs. Hibernation mode 25 will be available with HibernationFixup.kext which provide additional NVRAM support.  In the case you are using OC or Osmosis you have to ask those developer if they provide analogous services. In the case of Chameleon some kind of FileNVRAM exists.  1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689440 Share on other sites More sharing options...
Matgen84 Posted September 10, 2019 Share Posted September 10, 2019 (edited) 9 hours ago, vector sigma said: Not sure you can commit changes, so why not to not try to create a stash?  Sorry for my bad english  I explained myself badly as I understand badly what you means.  I select Option 7 yestarday: <<<<<<< Updated upstream  and >>>>>>> Stashed change appears in the script (not in in the orignal in Github repo  This morning, I want to use original Build script with same option 7: I've the issue below. No issue with Option 6.  #? 7 [UPDATE CLOVER] BaseTools/Source/Python/build/BuildReport.pyc: needs merge Conf/BuildEnv.sh: needs merge buildme: needs merge BaseTools/Source/Python/build/BuildReport.pyc: needs merge Conf/BuildEnv.sh: needs merge buildme: needs merge BaseTools/Source/Python/build/BuildReport.pyc: unmerged (ea3deac11f76de02500d69ee58084962ba6e81b4) BaseTools/Source/Python/build/BuildReport.pyc: unmerged (5a59c66793d5a7e8fda819d5939f57bb8fdb73be) BaseTools/Source/Python/build/BuildReport.pyc: unmerged (067f996a8ee42e9bb950fd78d45016cb72b9c16e) Conf/BuildEnv.sh: unmerged (5386e9424283e839cc802c8ae75f148c3accbeb5) Conf/BuildEnv.sh: unmerged (95eb44c5b613339d29aaccd29a19a8b290f83278) buildme: unmerged (48817a2fa37d0184069ca9314f9f17134199d66d) buildme: unmerged (93d9ec01c02308e7d983c1941cc399f6042eaed4) buildme: unmerged (ee4607dcb272c3fd622952c72efbcc1ef1f76fb5) fatal: git-write-tree: error building trees Cannot save the current index state  Edited September 10, 2019 by Matgen84 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689443 Share on other sites More sharing options...
arsradu Posted September 11, 2019 Share Posted September 11, 2019 (edited) Thanks for the new commits on github! I was able to compile Clover using only github (https://github.com/CloverHackyColor/CloverBootloader), with no errors whatsoever, on a clean environment.  No need to replace ebuild.sh anymore.  By the way, I found using the github method a lot easier and a lot cleaner.  So...thumbs up from my side. Edited September 11, 2019 by arsradu 3 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689589 Share on other sites More sharing options...
Badruzeus Posted September 11, 2019 Share Posted September 11, 2019 (edited) Is `build_gcc9.sh` missing from https://github.com/CloverHackyColor/CloverBootloader or it has no support yet? No GCC 9.2 issue with ./ebuild.sh -fr -t GCC53 https://sourceforge.net/projects/cloverefiboot/ (EDK2 2019 Stable) though. Thanks. Edited September 11, 2019 by Badruzeus 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689592 Share on other sites More sharing options...
vector sigma Posted September 11, 2019 Share Posted September 11, 2019 On 9/10/2019 at 6:28 AM, Matgen84 said: Sorry for my bad english  I explained myself badly as I understand badly what you means.  I select Option 7 yestarday: <<<<<<< Updated upstream  and >>>>>>> Stashed change appears in the script (not in in the orignal in Github repo  This morning, I want to use original Build script with same option 7: I've the issue below. No issue with Option 6. Hi, now is different. On 9/10/2019 at 6:28 AM, Matgen84 said: buildme: needs merge Well, I guess you modify it do do something. I hope there's no longer need as I introduced in it a way to expand or compile Clover as you need. if you create a script:  ~/src/tools/Scripts/build.sh this will be used to build Clover with your own parameters. buildme send the path to Clover ($1) and the toolchain ($2).  if you create a script:  ~/src/tools/Scripts/postbuild.sh that script will be used to do additional things after you build Clover (e.g. adding drivers).  Hope it helps (only on github atm) 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689594 Share on other sites More sharing options...
Matgen84 Posted September 11, 2019 Share Posted September 11, 2019 15 minutes ago, vector sigma said: Hi, now is different. Well, I guess you modify it do do something. I hope there's no longer need as I introduced in it a way to expand or compile Clover as you need. if you create a script:  ~/src/tools/Scripts/build.sh this will be used to build Clover with your own parameters. buildme send the path to Clover ($1) and the toolchain ($2).  if you create a script:  ~/src/tools/Scripts/postbuild.sh that script will be used to do additional things after you build Clover (e.g. adding drivers).  Hope it helps (only on github atm)  Great Thanks a lot Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689595 Share on other sites More sharing options...
LockDown Posted September 11, 2019 Share Posted September 11, 2019 10 hours ago, vector sigma said: if you create a script: Â ~/src/tools/Scripts/build.sh this will be used to build Clover with your own parameters. buildme send the path to Clover ($1) and the toolchain ($2) Â ~/src/tools/Scripts/postbuild.sh that script will be used to do additional things after you build Clover can you show us an example of content of the script? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689664 Share on other sites More sharing options...
Slice Posted September 12, 2019 Share Posted September 12, 2019 @vector sigma The script buildme works but it compiles from begin to end. It is too long. Is there any way to make "Rebuild" with cashed compilation? For example one file changed and don't compile other files? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689674 Share on other sites More sharing options...
fusion71au Posted September 12, 2019 Share Posted September 12, 2019 16 hours ago, Badruzeus said: Is `build_gcc9.sh` missing from https://github.com/CloverHackyColor/CloverBootloader or it has no support yet? No GCC 9.2 issue with ./ebuild.sh -fr -t GCC53 https://sourceforge.net/projects/cloverefiboot/ (EDK2 2019 Stable) though. Thanks.  I have similar problem now with CloverHackyColor git and compilation with gcc53 tool chain ---> "build: : warning: Tool chain [gcc53] is not defined". Looks like very recent commit broke it again (since it was working before).  Below is my build log using ./buildme gcc53 ... fusion71aus-iMac:~ fusion71au$ cd /Users/fusion71au/src/CloverBootloader fusion71aus-iMac:CloverBootloader fusion71au$ ./buildme gcc53 ------------------------------------------------------------------------ buildme, Clover v2.5k r5078 (SHA: ceb598f) TOOLCHAIN: gcc53 (override example: './buildme GCC53') 1) build Clover 7) update Clover (reset changes) 2) make pkg 8) show diff 3) make iso 9) open drivers directory 4) build all 10) clean BaseTools 5) status 11) quit 6) update Clover Please enter your choice: 6 [UPDATE CLOVER] Fetching origin From https://github.com/CloverHackyColor/CloverBootloader * branch master -> FETCH_HEAD Already up-to-date. ------------------------------------------------------------------------ buildme, Clover v2.5k r5078 (SHA: ceb598f) TOOLCHAIN: gcc53 (override example: './buildme GCC53') 1) build Clover 7) update Clover (reset changes) 2) make pkg 8) show diff 3) make iso 9) open drivers directory 4) build all 10) clean BaseTools 5) status 11) quit 6) update Clover Please enter your choice: 1 [CHECK XCODE] Loading previous configuration from /Users/fusion71au/src/CloverBootloader/Conf/BuildEnv.sh WORKSPACE: /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH: /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH: /Users/fusion71au/src/CloverBootloader/Conf [BUILD CLOVER] TOOLCHAIN_DIR: /Users/fusion71au/src/opt/local NASM_PREFIX: /Users/fusion71au/src/opt/local/bin/ NASM_VER: 2.14.02 Building from: /Users/fusion71au/src/CloverBootloader Building tools as they are not found make -C Source/C Attempting to detect HOST_ARCH from 'uname -m': x86_64 Detected HOST_ARCH of X64 using uname. mkdir -p . mkdir ./libs make -C Common gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 BasePeCoff.c -o BasePeCoff.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 BinderFuncs.c -o BinderFuncs.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 CommonLib.c -o CommonLib.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 Crc32.c -o Crc32.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 Decompress.c -o Decompress.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 EfiCompress.c -o EfiCompress.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 EfiUtilityMsgs.c -o EfiUtilityMsgs.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 FirmwareVolumeBuffer.c -o FirmwareVolumeBuffer.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 FvLib.c -o FvLib.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 MemoryFile.c -o MemoryFile.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 MyAlloc.c -o MyAlloc.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 OsPath.c -o OsPath.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 ParseGuidedSectionTools.c -o ParseGuidedSectionTools.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 ParseInf.c -o ParseInf.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 PeCoffLoaderEx.c -o PeCoffLoaderEx.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 SimpleFileParsing.c -o SimpleFileParsing.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 StringFuncs.c -o StringFuncs.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 TianoCompress.c -o TianoCompress.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 PcdValueCommon.c -o PcdValueCommon.o ar crs ../libs/libCommon.a BasePeCoff.o BinderFuncs.o CommonLib.o Crc32.o Decompress.o EfiCompress.o EfiUtilityMsgs.o FirmwareVolumeBuffer.o FvLib.o MemoryFile.o MyAlloc.o OsPath.o ParseGuidedSectionTools.o ParseInf.o PeCoffLoaderEx.o SimpleFileParsing.o StringFuncs.o TianoCompress.o PcdValueCommon.o mkdir ./bin make -C VfrCompile VfrLexer.h BIN_DIR='.' make -C Pccts/dlg cc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -c dlg_p.c cc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -c dlg_a.c cc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -c main.c cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 err.c -o err.o cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 ../support/set/set.c cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 support.c -o support.o cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 output.c -o output.o cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 relabel.c -o relabel.o cc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 automata.c -o automata.o cc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -o ./dlg dlg_p.o dlg_a.o main.o err.o set.o support.o output.o relabel.o automata.o BIN_DIR='.' make -C Pccts/antlr gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 antlr.c -o antlr.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 scan.c -o scan.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 err.c -o err.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 bits.c -o bits.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 build.c -o build.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 fset2.c -o fset2.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 fset.c -o fset.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 gen.c -o gen.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 globals.c -o globals.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 hash.c -o hash.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 lex.c -o lex.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 main.c -o main.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 misc.c -o misc.o gcc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -c -o set.o ../support/set/set.c gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 pred.c -o pred.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 egman.c -o egman.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 mrhoist.c -o mrhoist.o gcc -c -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 fcache.c -o fcache.o gcc -O -I. -I../support/set -I../h -DUSER_ZZSYN -DZZLEXBUFSIZE=65536 -o ./antlr antlr.o scan.o err.o bits.o build.o fset2.o fset.o gen.o globals.o hash.o lex.o main.o misc.o set.o pred.o egman.o mrhoist.o fcache.o Pccts/antlr/antlr -CC -e3 -ck 3 -k 2 -fl VfrParser.dlg -ft VfrTokens.h -o . VfrSyntax.g Antlr parser generator Version 1.33MR33 1989-2001 VfrSyntax.g, line 3508: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) VfrSyntax.g, line 3517: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) VfrSyntax.g, line 3526: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) VfrSyntax.g, line 3536: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) VfrSyntax.g, line 3566: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) VfrSyntax.g, line 3575: warning: alts 1 and 2 of {..} ambiguous upon ( ";" RefreshGuid GuidOp Locked Image EndIf InconsistentIf DisableIf SuppressIf Default GrayOutIf ) Pccts/dlg/dlg -C2 -i -CC -cl VfrLexer -o . VfrParser.dlg dlg Version 1.33MR33 1989-2001 make -C BrotliCompress gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 tools/brotli.c -o tools/brotli.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 common/dictionary.c -o common/dictionary.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 common/transform.c -o common/transform.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 dec/bit_reader.c -o dec/bit_reader.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 dec/decode.c -o dec/decode.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 dec/huffman.c -o dec/huffman.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 dec/state.c -o dec/state.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/backward_references.c -o enc/backward_references.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/backward_references_hq.c -o enc/backward_references_hq.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/bit_cost.c -o enc/bit_cost.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/block_splitter.c -o enc/block_splitter.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/brotli_bit_stream.c -o enc/brotli_bit_stream.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/cluster.c -o enc/cluster.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/compress_fragment.c -o enc/compress_fragment.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/compress_fragment_two_pass.c -o enc/compress_fragment_two_pass.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/dictionary_hash.c -o enc/dictionary_hash.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/encode.c -o enc/encode.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/encoder_dict.c -o enc/encoder_dict.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/entropy_encode.c -o enc/entropy_encode.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/histogram.c -o enc/histogram.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/literal_cost.c -o enc/literal_cost.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/memory.c -o enc/memory.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/metablock.c -o enc/metablock.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/static_dict.c -o enc/static_dict.o gcc -c -I ./include -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 enc/utf8_util.c -o enc/utf8_util.o gcc -o ../bin/Brotli tools/brotli.o common/dictionary.o common/transform.o dec/bit_reader.o dec/decode.o dec/huffman.o dec/state.o enc/backward_references.o enc/backward_references_hq.o enc/bit_cost.o enc/block_splitter.o enc/brotli_bit_stream.o enc/cluster.o enc/compress_fragment.o enc/compress_fragment_two_pass.o enc/dictionary_hash.o enc/encode.o enc/encoder_dict.o enc/entropy_encode.o enc/histogram.o enc/literal_cost.o enc/memory.o enc/metablock.o enc/static_dict.o enc/utf8_util.o -L../libs -lm make -C VfrCompile g++ -c -DPCCTS_USE_NAMESPACE_STD -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -O2 Pccts/h/AParser.cpp -o AParser.o g++ -c -DPCCTS_USE_NAMESPACE_STD -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -O2 Pccts/h/DLexerBase.cpp -o DLexerBase.o g++ -c -DPCCTS_USE_NAMESPACE_STD -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -O2 Pccts/h/ATokenBuffer.cpp -o ATokenBuffer.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 EfiVfrParser.cpp -o EfiVfrParser.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 VfrLexer.cpp -o VfrLexer.o g++ -c -DPCCTS_USE_NAMESPACE_STD -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -O2 VfrSyntax.cpp -o VfrSyntax.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 VfrFormPkg.cpp -o VfrFormPkg.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 VfrError.cpp -o VfrError.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 VfrUtilityLib.cpp -o VfrUtilityLib.o g++ -c -I Pccts/h -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -Wno-unused-result -O2 VfrCompiler.cpp -o VfrCompiler.o g++ -o ../bin/VfrCompile AParser.o DLexerBase.o ATokenBuffer.o EfiVfrParser.o VfrLexer.o VfrSyntax.o VfrFormPkg.o VfrError.o VfrUtilityLib.o VfrCompiler.o -L../libs -lCommon make -C EfiLdrImage gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 EfiLdrImage.c -o EfiLdrImage.o gcc -o ../bin/EfiLdrImage EfiLdrImage.o -L../libs -lCommon make -C EfiRom gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 EfiRom.c -o EfiRom.o gcc -o ../bin/EfiRom EfiRom.o -L../libs -lCommon make -C GenFfs gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenFfs.c -o GenFfs.o gcc -o ../bin/GenFfs GenFfs.o -L../libs -lCommon make -C GenFv gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenFv.c -o GenFv.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenFvInternalLib.c -o GenFvInternalLib.o gcc -o ../bin/GenFv GenFv.o GenFvInternalLib.o -L../libs -lCommon make -C GenFw gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenFw.c -o GenFw.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 ElfConvert.c -o ElfConvert.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 Elf32Convert.c -o Elf32Convert.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 Elf64Convert.c -o Elf64Convert.o gcc -o ../bin/GenFw GenFw.o ElfConvert.o Elf32Convert.o Elf64Convert.o -L../libs -lCommon make -C GenPage gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenPage.c -o GenPage.o gcc -o ../bin/GenPage GenPage.o -L../libs -lCommon make -C GenSec gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenSec.c -o GenSec.o gcc -o ../bin/GenSec GenSec.o -L../libs -lCommon make -C GenCrc32 gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 GenCrc32.c -o GenCrc32.o gcc -o ../bin/GenCrc32 GenCrc32.o -L../libs -lCommon make -C LzmaCompress gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST LzmaCompress.c -o LzmaCompress.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/Alloc.c -o Sdk/C/Alloc.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/LzFind.c -o Sdk/C/LzFind.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/LzmaDec.c -o Sdk/C/LzmaDec.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/LzmaEnc.c -o Sdk/C/LzmaEnc.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/7zFile.c -o Sdk/C/7zFile.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/7zStream.c -o Sdk/C/7zStream.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 -D_7ZIP_ST Sdk/C/Bra86.c -o Sdk/C/Bra86.o gcc -o ../bin/LzmaCompress LzmaCompress.o Sdk/C/Alloc.o Sdk/C/LzFind.o Sdk/C/LzmaDec.o Sdk/C/LzmaEnc.o Sdk/C/7zFile.o Sdk/C/7zStream.o Sdk/C/Bra86.o -L../libs make -C Split gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 Split.c -o Split.o gcc -o ../bin/Split Split.o -L../libs -lCommon make -C TianoCompress gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 TianoCompress.c -o TianoCompress.o gcc -o ../bin/TianoCompress TianoCompress.o -L../libs -lCommon make -C VolInfo gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 VolInfo.c -o VolInfo.o gcc -o ../bin/VolInfo VolInfo.o -L../libs -lCommon make -C DevicePath gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 DevicePath.c -o DevicePath.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 UefiDevicePathLib.c -o UefiDevicePathLib.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 DevicePathFromText.c -o DevicePathFromText.o gcc -c -I .. -I ../Include/Common -I ../Include/ -I ../Include/IndustryStandard -I ../Common/ -I .. -I . -I ../Include/X64/ -MD -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-deprecated-declarations -Wno-self-assign -Wno-unused-result -nostdlib -g -O2 DevicePathUtilities.c -o DevicePathUtilities.o gcc -o ../bin/DevicePath DevicePath.o UefiDevicePathLib.o DevicePathFromText.o DevicePathUtilities.o -L../libs -lCommon Finished building BaseTools C Tools with HOST_ARCH=X64 make -C Source/Python make[1]: Nothing to be done for `all'. make -C Tests testHelp (TianoCompress.Tests) ... ok testRandomDataCycles (TianoCompress.Tests) ... ok test_AutoGen_AutoGen (CheckPythonSyntax.Tests) ... ok test_AutoGen_AutoGenWorker (CheckPythonSyntax.Tests) ... ok test_AutoGen_BuildEngine (CheckPythonSyntax.Tests) ... ok test_AutoGen_CacheIR (CheckPythonSyntax.Tests) ... ok test_AutoGen_DataPipe (CheckPythonSyntax.Tests) ... ok test_AutoGen_GenC (CheckPythonSyntax.Tests) ... ok test_AutoGen_GenDepex (CheckPythonSyntax.Tests) ... ok test_AutoGen_GenMake (CheckPythonSyntax.Tests) ... ok test_AutoGen_GenPcdDb (CheckPythonSyntax.Tests) ... ok test_AutoGen_GenVar (CheckPythonSyntax.Tests) ... ok test_AutoGen_IdfClassObject (CheckPythonSyntax.Tests) ... ok test_AutoGen_InfSectionParser (CheckPythonSyntax.Tests) ... ok test_AutoGen_ModuleAutoGen (CheckPythonSyntax.Tests) ... ok test_AutoGen_ModuleAutoGenHelper (CheckPythonSyntax.Tests) ... ok test_AutoGen_PlatformAutoGen (CheckPythonSyntax.Tests) ... ok test_AutoGen_StrGather (CheckPythonSyntax.Tests) ... ok test_AutoGen_UniClassObject (CheckPythonSyntax.Tests) ... ok test_AutoGen_ValidCheckingInfoObject (CheckPythonSyntax.Tests) ... ok test_AutoGen_WorkspaceAutoGen (CheckPythonSyntax.Tests) ... ok test_AutoGen___init__ (CheckPythonSyntax.Tests) ... ok test_BPDG_BPDG (CheckPythonSyntax.Tests) ... ok test_BPDG_GenVpd (CheckPythonSyntax.Tests) ... ok test_BPDG_StringTable (CheckPythonSyntax.Tests) ... ok test_BPDG___init__ (CheckPythonSyntax.Tests) ... ok test_Capsule_GenerateCapsule (CheckPythonSyntax.Tests) ... ok test_Capsule_GenerateWindowsDriver (CheckPythonSyntax.Tests) ... ok test_Capsule_WindowsCapsuleSupportHelper (CheckPythonSyntax.Tests) ... ok test_CommonDataClass_CommonClass (CheckPythonSyntax.Tests) ... ok test_CommonDataClass_DataClass (CheckPythonSyntax.Tests) ... ok test_CommonDataClass_Exceptions (CheckPythonSyntax.Tests) ... ok test_CommonDataClass_FdfClass (CheckPythonSyntax.Tests) ... ok test_CommonDataClass___init__ (CheckPythonSyntax.Tests) ... ok test_Common_BuildToolError (CheckPythonSyntax.Tests) ... ok test_Common_BuildVersion (CheckPythonSyntax.Tests) ... ok test_Common_DataType (CheckPythonSyntax.Tests) ... ok test_Common_Edk2_Capsule_FmpPayloadHeader (CheckPythonSyntax.Tests) ... ok test_Common_Edk2_Capsule___init__ (CheckPythonSyntax.Tests) ... ok test_Common_Edk2___init__ (CheckPythonSyntax.Tests) ... ok test_Common_EdkLogger (CheckPythonSyntax.Tests) ... ok test_Common_Expression (CheckPythonSyntax.Tests) ... ok test_Common_GlobalData (CheckPythonSyntax.Tests) ... ok test_Common_LongFilePathOs (CheckPythonSyntax.Tests) ... ok test_Common_LongFilePathOsPath (CheckPythonSyntax.Tests) ... ok test_Common_LongFilePathSupport (CheckPythonSyntax.Tests) ... ok test_Common_Misc (CheckPythonSyntax.Tests) ... ok test_Common_MultipleWorkspace (CheckPythonSyntax.Tests) ... ok test_Common_Parsing (CheckPythonSyntax.Tests) ... ok test_Common_RangeExpression (CheckPythonSyntax.Tests) ... ok test_Common_StringUtils (CheckPythonSyntax.Tests) ... ok test_Common_TargetTxtClassObject (CheckPythonSyntax.Tests) ... ok test_Common_ToolDefClassObject (CheckPythonSyntax.Tests) ... ok test_Common_Uefi_Capsule_FmpAuthHeader (CheckPythonSyntax.Tests) ... ok test_Common_Uefi_Capsule_FmpCapsuleHeader (CheckPythonSyntax.Tests) ... ok test_Common_Uefi_Capsule_UefiCapsuleHeader (CheckPythonSyntax.Tests) ... ok test_Common_Uefi_Capsule___init__ (CheckPythonSyntax.Tests) ... ok test_Common_Uefi___init__ (CheckPythonSyntax.Tests) ... ok test_Common_VariableAttributes (CheckPythonSyntax.Tests) ... ok test_Common_VpdInfoFile (CheckPythonSyntax.Tests) ... ok test_Common___init__ (CheckPythonSyntax.Tests) ... ok test_Common_buildoptions (CheckPythonSyntax.Tests) ... ok test_Common_caching (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser3_CLexer (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser3_CParser (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser3___init__ (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser4_CLexer (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser4_CListener (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser4_CParser (CheckPythonSyntax.Tests) ... ok test_Ecc_CParser4___init__ (CheckPythonSyntax.Tests) ... ok test_Ecc_Check (CheckPythonSyntax.Tests) ... ok test_Ecc_CodeFragment (CheckPythonSyntax.Tests) ... ok test_Ecc_CodeFragmentCollector (CheckPythonSyntax.Tests) ... ok test_Ecc_Configuration (CheckPythonSyntax.Tests) ... ok test_Ecc_Database (CheckPythonSyntax.Tests) ... ok test_Ecc_EccGlobalData (CheckPythonSyntax.Tests) ... ok test_Ecc_EccMain (CheckPythonSyntax.Tests) ... ok test_Ecc_EccToolError (CheckPythonSyntax.Tests) ... ok test_Ecc_Exception (CheckPythonSyntax.Tests) ... ok test_Ecc_FileProfile (CheckPythonSyntax.Tests) ... ok test_Ecc_MetaDataParser (CheckPythonSyntax.Tests) ... ok test_Ecc_MetaFileWorkspace_MetaDataTable (CheckPythonSyntax.Tests) ... ok test_Ecc_MetaFileWorkspace_MetaFileParser (CheckPythonSyntax.Tests) ... ok test_Ecc_MetaFileWorkspace_MetaFileTable (CheckPythonSyntax.Tests) ... ok test_Ecc_MetaFileWorkspace___init__ (CheckPythonSyntax.Tests) ... ok test_Ecc_ParserWarning (CheckPythonSyntax.Tests) ... ok test_Ecc_Xml_XmlRoutines (CheckPythonSyntax.Tests) ... ok test_Ecc_Xml___init__ (CheckPythonSyntax.Tests) ... ok test_Ecc___init__ (CheckPythonSyntax.Tests) ... ok test_Ecc_c (CheckPythonSyntax.Tests) ... ok test_Eot_CParser3_CLexer (CheckPythonSyntax.Tests) ... ok test_Eot_CParser3_CParser (CheckPythonSyntax.Tests) ... ok test_Eot_CParser3___init__ (CheckPythonSyntax.Tests) ... ok test_Eot_CParser4_CLexer (CheckPythonSyntax.Tests) ... ok test_Eot_CParser4_CListener (CheckPythonSyntax.Tests) ... ok test_Eot_CParser4_CParser (CheckPythonSyntax.Tests) ... ok test_Eot_CParser4___init__ (CheckPythonSyntax.Tests) ... ok test_Eot_CodeFragment (CheckPythonSyntax.Tests) ... ok test_Eot_CodeFragmentCollector (CheckPythonSyntax.Tests) ... ok test_Eot_Database (CheckPythonSyntax.Tests) ... ok test_Eot_EotGlobalData (CheckPythonSyntax.Tests) ... ok test_Eot_EotMain (CheckPythonSyntax.Tests) ... ok test_Eot_EotToolError (CheckPythonSyntax.Tests) ... ok test_Eot_FileProfile (CheckPythonSyntax.Tests) ... ok test_Eot_Identification (CheckPythonSyntax.Tests) ... ok test_Eot_InfParserLite (CheckPythonSyntax.Tests) ... ok test_Eot_Parser (CheckPythonSyntax.Tests) ... ok test_Eot_ParserWarning (CheckPythonSyntax.Tests) ... ok test_Eot_Report (CheckPythonSyntax.Tests) ... ok test_Eot___init__ (CheckPythonSyntax.Tests) ... ok test_Eot_c (CheckPythonSyntax.Tests) ... ok test_GenFds_AprioriSection (CheckPythonSyntax.Tests) ... ok test_GenFds_Capsule (CheckPythonSyntax.Tests) ... ok test_GenFds_CapsuleData (CheckPythonSyntax.Tests) ... ok test_GenFds_CompressSection (CheckPythonSyntax.Tests) ... ok test_GenFds_DataSection (CheckPythonSyntax.Tests) ... ok test_GenFds_DepexSection (CheckPythonSyntax.Tests) ... ok test_GenFds_EfiSection (CheckPythonSyntax.Tests) ... ok test_GenFds_Fd (CheckPythonSyntax.Tests) ... ok test_GenFds_FdfParser (CheckPythonSyntax.Tests) ... ok test_GenFds_Ffs (CheckPythonSyntax.Tests) ... ok test_GenFds_FfsFileStatement (CheckPythonSyntax.Tests) ... ok test_GenFds_FfsInfStatement (CheckPythonSyntax.Tests) ... ok test_GenFds_Fv (CheckPythonSyntax.Tests) ... ok test_GenFds_FvImageSection (CheckPythonSyntax.Tests) ... ok test_GenFds_GenFds (CheckPythonSyntax.Tests) ... ok test_GenFds_GenFdsGlobalVariable (CheckPythonSyntax.Tests) ... ok test_GenFds_GuidSection (CheckPythonSyntax.Tests) ... ok test_GenFds_OptRomFileStatement (CheckPythonSyntax.Tests) ... ok test_GenFds_OptRomInfStatement (CheckPythonSyntax.Tests) ... ok test_GenFds_OptionRom (CheckPythonSyntax.Tests) ... ok test_GenFds_Region (CheckPythonSyntax.Tests) ... ok test_GenFds_Rule (CheckPythonSyntax.Tests) ... ok test_GenFds_RuleComplexFile (CheckPythonSyntax.Tests) ... ok test_GenFds_RuleSimpleFile (CheckPythonSyntax.Tests) ... ok test_GenFds_Section (CheckPythonSyntax.Tests) ... ok test_GenFds_UiSection (CheckPythonSyntax.Tests) ... ok test_GenFds_VerSection (CheckPythonSyntax.Tests) ... ok test_GenFds___init__ (CheckPythonSyntax.Tests) ... ok test_GenPatchPcdTable_GenPatchPcdTable (CheckPythonSyntax.Tests) ... ok test_GenPatchPcdTable___init__ (CheckPythonSyntax.Tests) ... ok test_PatchPcdValue_PatchPcdValue (CheckPythonSyntax.Tests) ... ok test_PatchPcdValue___init__ (CheckPythonSyntax.Tests) ... ok test_Pkcs7Sign_Pkcs7Sign (CheckPythonSyntax.Tests) ... ok test_Rsa2048Sha256Sign_Rsa2048Sha256GenerateKeys (CheckPythonSyntax.Tests) ... ok test_Rsa2048Sha256Sign_Rsa2048Sha256Sign (CheckPythonSyntax.Tests) ... ok test_Table_Table (CheckPythonSyntax.Tests) ... ok test_Table_TableDataModel (CheckPythonSyntax.Tests) ... ok test_Table_TableDec (CheckPythonSyntax.Tests) ... ok test_Table_TableDsc (CheckPythonSyntax.Tests) ... ok test_Table_TableEotReport (CheckPythonSyntax.Tests) ... ok test_Table_TableFdf (CheckPythonSyntax.Tests) ... ok test_Table_TableFile (CheckPythonSyntax.Tests) ... ok test_Table_TableFunction (CheckPythonSyntax.Tests) ... ok test_Table_TableIdentifier (CheckPythonSyntax.Tests) ... ok test_Table_TableInf (CheckPythonSyntax.Tests) ... ok test_Table_TablePcd (CheckPythonSyntax.Tests) ... ok test_Table_TableQuery (CheckPythonSyntax.Tests) ... ok test_Table_TableReport (CheckPythonSyntax.Tests) ... ok test_Table___init__ (CheckPythonSyntax.Tests) ... ok test_TargetTool_TargetTool (CheckPythonSyntax.Tests) ... ok test_TargetTool___init__ (CheckPythonSyntax.Tests) ... ok test_Trim_Trim (CheckPythonSyntax.Tests) ... ok test_UPT_BuildVersion (CheckPythonSyntax.Tests) ... ok test_UPT_Core_DependencyRules (CheckPythonSyntax.Tests) ... ok test_UPT_Core_DistributionPackageClass (CheckPythonSyntax.Tests) ... ok test_UPT_Core_FileHook (CheckPythonSyntax.Tests) ... ok test_UPT_Core_IpiDb (CheckPythonSyntax.Tests) ... ok test_UPT_Core_PackageFile (CheckPythonSyntax.Tests) ... ok test_UPT_Core___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_GenMetaFile_GenDecFile (CheckPythonSyntax.Tests) ... ok test_UPT_GenMetaFile_GenInfFile (CheckPythonSyntax.Tests) ... ok test_UPT_GenMetaFile_GenMetaFileMisc (CheckPythonSyntax.Tests) ... ok test_UPT_GenMetaFile_GenXmlFile (CheckPythonSyntax.Tests) ... ok test_UPT_GenMetaFile___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_InstallPkg (CheckPythonSyntax.Tests) ... ok test_UPT_InventoryWs (CheckPythonSyntax.Tests) ... ok test_UPT_Library_CommentGenerating (CheckPythonSyntax.Tests) ... ok test_UPT_Library_CommentParsing (CheckPythonSyntax.Tests) ... ok test_UPT_Library_DataType (CheckPythonSyntax.Tests) ... ok test_UPT_Library_ExpressionValidate (CheckPythonSyntax.Tests) ... ok test_UPT_Library_GlobalData (CheckPythonSyntax.Tests) ... ok test_UPT_Library_Misc (CheckPythonSyntax.Tests) ... ok test_UPT_Library_ParserValidate (CheckPythonSyntax.Tests) ... ok test_UPT_Library_Parsing (CheckPythonSyntax.Tests) ... ok test_UPT_Library_StringUtils (CheckPythonSyntax.Tests) ... ok test_UPT_Library_UniClassObject (CheckPythonSyntax.Tests) ... ok test_UPT_Library_Xml_XmlRoutines (CheckPythonSyntax.Tests) ... ok test_UPT_Library_Xml___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_Library___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_Logger_Log (CheckPythonSyntax.Tests) ... ok test_UPT_Logger_StringTable (CheckPythonSyntax.Tests) ... ok test_UPT_Logger_ToolError (CheckPythonSyntax.Tests) ... ok test_UPT_Logger___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_MkPkg (CheckPythonSyntax.Tests) ... ok test_UPT_Object_POM_CommonObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_POM_ModuleObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_POM_PackageObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_POM___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_DecObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfBinaryObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfBuildOptionObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfCommonObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfDefineCommonObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfDefineObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfDepexObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfGuidObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfHeaderObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfLibraryClassesObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfMisc (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfPackagesObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfPcdObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfPpiObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfProtocolObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfSoucesObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser_InfUserExtensionObject (CheckPythonSyntax.Tests) ... ok test_UPT_Object_Parser___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_Object___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_DecParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_DecParserMisc (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfAsBuiltProcess (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfBinarySectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfBuildOptionSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfDefineSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfDepexSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfGuidPpiProtocolSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfLibrarySectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfPackageSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfParserMisc (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfPcdSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser_InfSourceSectionParser (CheckPythonSyntax.Tests) ... ok test_UPT_Parser___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_PomAdapter_DecPomAlignment (CheckPythonSyntax.Tests) ... ok test_UPT_PomAdapter_InfPomAlignment (CheckPythonSyntax.Tests) ... ok test_UPT_PomAdapter_InfPomAlignmentMisc (CheckPythonSyntax.Tests) ... ok test_UPT_PomAdapter___init__ (CheckPythonSyntax.Tests) ... ok test_UPT_ReplacePkg (CheckPythonSyntax.Tests) ... ok test_UPT_RmPkg (CheckPythonSyntax.Tests) ... ok test_UPT_TestInstall (CheckPythonSyntax.Tests) ... ok test_UPT_UPT (CheckPythonSyntax.Tests) ... ok test_UPT_UnitTest_CommentGeneratingUnitTest (CheckPythonSyntax.Tests) ... ok test_UPT_UnitTest_CommentParsingUnitTest (CheckPythonSyntax.Tests) ... ok test_UPT_UnitTest_DecParserTest (CheckPythonSyntax.Tests) ... ok test_UPT_UnitTest_DecParserUnitTest (CheckPythonSyntax.Tests) ... ok test_UPT_UnitTest_InfBinarySectionTest (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_CommonXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_GuidProtocolPpiXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_IniToXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_ModuleSurfaceAreaXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_PackageSurfaceAreaXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_PcdXml (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_XmlParser (CheckPythonSyntax.Tests) ... ok test_UPT_Xml_XmlParserMisc (CheckPythonSyntax.Tests) ... ok test_UPT_Xml___init__ (CheckPythonSyntax.Tests) ... ok test_Workspace_BuildClassObject (CheckPythonSyntax.Tests) ... ok test_Workspace_DecBuildData (CheckPythonSyntax.Tests) ... ok test_Workspace_DscBuildData (CheckPythonSyntax.Tests) ... ok test_Workspace_InfBuildData (CheckPythonSyntax.Tests) ... ok test_Workspace_MetaDataTable (CheckPythonSyntax.Tests) ... ok test_Workspace_MetaFileCommentParser (CheckPythonSyntax.Tests) ... ok test_Workspace_MetaFileParser (CheckPythonSyntax.Tests) ... ok test_Workspace_MetaFileTable (CheckPythonSyntax.Tests) ... ok test_Workspace_WorkspaceCommon (CheckPythonSyntax.Tests) ... ok test_Workspace_WorkspaceDatabase (CheckPythonSyntax.Tests) ... ok test_Workspace___init__ (CheckPythonSyntax.Tests) ... ok test_build_BuildReport (CheckPythonSyntax.Tests) ... ok test_build___init__ (CheckPythonSyntax.Tests) ... ok test_build_build (CheckPythonSyntax.Tests) ... ok test_sitecustomize (CheckPythonSyntax.Tests) ... ok test32bitUnicodeCharInUtf8Comment (CheckUnicodeSourceFiles.Tests) ... ok test32bitUnicodeCharInUtf8File (CheckUnicodeSourceFiles.Tests) ... ok testSupplementaryPlaneUnicodeCharInUtf16File (CheckUnicodeSourceFiles.Tests) ... ok testSurrogatePairUnicodeCharInUtf16File (CheckUnicodeSourceFiles.Tests) ... ok testSurrogatePairUnicodeCharInUtf8File (CheckUnicodeSourceFiles.Tests) ... ok testSurrogatePairUnicodeCharInUtf8FileWithBom (CheckUnicodeSourceFiles.Tests) ... ok testUtf16InUniFile (CheckUnicodeSourceFiles.Tests) ... ok testValidUtf8File (CheckUnicodeSourceFiles.Tests) ... ok testValidUtf8FileWithBom (CheckUnicodeSourceFiles.Tests) ... ok ---------------------------------------------------------------------- Ran 280 tests in 1.746s OK Running edk2 build for CloverX64 using the command: build --conf=/Users/fusion71au/src/CloverBootloader/Conf -D USE_LOW_EBDA -p Clover.dsc -a X64 -b RELEASE -t gcc53 -n 5 Build environment: Darwin-16.7.0-x86_64-i386-64bit Build start time: 15:39:58, Sep.12 2019 WORKSPACE = /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH = /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH = /Users/fusion71au/src/CloverBootloader/Conf build: : warning: Tool chain [gcc53] is not defined build.py... : error 4000: Not available [gcc53] not defined. No toolchain available for build! - Failed - Build end time: 15:39:58, Sep.12 2019 Build total time: 00:00:00 No problem with default XCODE tool chain though . 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689681 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 36 minutes ago, fusion71au said: No problem with default XCODE tool chain though . svn = r5080 github = r5078, gcc9 only in 5079. Now should be ok 2 hours ago, Slice said: The script buildme works but it compiles from begin to end. It is too long. Yep, it actually compile boot7 and always use -fr. Two passage  2 hours ago, Slice said: @vector sigma  Is there any way to make "Rebuild" with cashed compilation? For example one file changed and don't compile other files? Try '5) test build (no autogen, no boot files)' on latest commit. ebuild.sh is called once: ./ebuild.sh -nb very fast and rebuild only changed files. Drivers aren't copied to destinations so you only know if compilation succeded, as a test. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689687 Share on other sites More sharing options...
Badruzeus Posted September 12, 2019 Share Posted September 12, 2019 (edited) 1 hour ago, fusion71au said:  I have similar problem now with CloverHackyColor git and compilation with gcc53 tool chain ---> "build: : warning: Tool chain [gcc53] is not defined". Looks like very recent commit broke it again (since it was working before).  Below is my build log using ./buildme gcc53 ... No problem with default XCODE tool chain though . ..and why error logs are always differ on our case? #LOL Anyway, I use ./ebuild.sh -fr -t GCC53 (GCC 9.2.0 is installed on /CloverHackyColor/opt/local/*) Edited September 12, 2019 by Badruzeus 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689694 Share on other sites More sharing options...
fusion71au Posted September 12, 2019 Share Posted September 12, 2019 35 minutes ago, vector sigma said: svn = r5080 github = r5078, gcc9 only in 5079. Now should be ok  15 minutes ago, Badruzeus said: ..and why error logs are always differ on our case? #LOL Anyway, I use ./ebuild.sh -fr -t GCC53 (GCC 9.2.0 is installed on /CloverHackyColor/opt/local/*)  @vector sigma's latest commit fixed the "Tool chain [gcc53] is not defined" error, but now I get exactly the same error as @Badruzeus.  With upgrade to gcc9, I get the build log below with ./buildme GCC53 using CloverHackyColor git... fusion71aus-iMac:~ fusion71au$ cd /Users/fusion71au/src/CloverBootloader fusion71aus-iMac:CloverBootloader fusion71au$ ./buildme GCC53 ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 7 [UPDATE CLOVER] Fetching origin From https://github.com/CloverHackyColor/CloverBootloader * branch master -> FETCH_HEAD Already up-to-date. ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 1 Loading previous configuration from /Users/fusion71au/src/CloverBootloader/Conf/BuildEnv.sh WORKSPACE: /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH: /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH: /Users/fusion71au/src/CloverBootloader/Conf [BUILD CLOVER] TOOLCHAIN_DIR: /Users/fusion71au/src/opt/local NASM_PREFIX: /Users/fusion71au/src/opt/local/bin/ NASM_VER: 2.14.02 Building from: /Users/fusion71au/src/CloverBootloader Running edk2 build for CloverX64 using the command: build --conf=/Users/fusion71au/src/CloverBootloader/Conf -D USE_LOW_EBDA -p Clover.dsc -a X64 -b RELEASE -t GCC53 -n 5 Build environment: Darwin-16.7.0-x86_64-i386-64bit Build start time: 17:59:00, Sep.12 2019 WORKSPACE = /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH = /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH = /Users/fusion71au/src/CloverBootloader/Conf Architecture(s) = X64 Processing meta-data .Build target = RELEASE Toolchain = GCC53 Active Platform = /Users/fusion71au/src/CloverBootloader/Clover.dsc ......... done! Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiLib/UefiLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf [X64] [CC] UefiRuntimeServicesTableLib [CC] DriverEntryPoint [CC] Acpi [NASM] CpuFlushTlb [SLINK] UefiDriverEntryPoint Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64] [SLINK] UefiRuntimeServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BasePrintLib/BasePrintLib.inf [X64] /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:142:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 142 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreeAlignedPages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:343:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 343 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePool': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:810:17: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 810 | EFI_STATUS Status; | ^~~~~~ [CC] PrintLib [CC] DevicePathFromText [CC] Console [NASM] CpuSleep [SLINK] BaseCpuLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf [X64] [CC] PrintLibInternal [SLINK] BasePrintLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [X64] [CC] CompareMemWrapper [CC] UefiBootServicesTableLib [SLINK] UefiBootServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseLib/BaseLib.inf [X64] cc1: all warnings being treated as errors make: *** [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib/OUTPUT/MemoryAllocationLib.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiLib/UefiLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/BaseLib/BaseLib] build.py... : error F002: Failed to build module /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64, GCC53, RELEASE] - Failed - Build end time: 17:59:15, Sep.12 2019 Build total time: 00:00:15  Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689702 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 3 minutes ago, fusion71au said:   @vector sigma's latest commit fixed the "Tool chain [gcc53] is not defined" error, but now I get exactly the same error as @Badruzeus.  With upgrade to gcc9, I get the build log below with ./buildme GCC53 using CloverHackyColor git... fusion71aus-iMac:~ fusion71au$ cd /Users/fusion71au/src/CloverBootloader fusion71aus-iMac:CloverBootloader fusion71au$ ./buildme GCC53 ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 7 [UPDATE CLOVER] Fetching origin From https://github.com/CloverHackyColor/CloverBootloader * branch master -> FETCH_HEAD Already up-to-date. ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 1 Loading previous configuration from /Users/fusion71au/src/CloverBootloader/Conf/BuildEnv.sh WORKSPACE: /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH: /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH: /Users/fusion71au/src/CloverBootloader/Conf [BUILD CLOVER] TOOLCHAIN_DIR: /Users/fusion71au/src/opt/local NASM_PREFIX: /Users/fusion71au/src/opt/local/bin/ NASM_VER: 2.14.02 Building from: /Users/fusion71au/src/CloverBootloader Running edk2 build for CloverX64 using the command: build --conf=/Users/fusion71au/src/CloverBootloader/Conf -D USE_LOW_EBDA -p Clover.dsc -a X64 -b RELEASE -t GCC53 -n 5 Build environment: Darwin-16.7.0-x86_64-i386-64bit Build start time: 17:59:00, Sep.12 2019 WORKSPACE = /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH = /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH = /Users/fusion71au/src/CloverBootloader/Conf Architecture(s) = X64 Processing meta-data .Build target = RELEASE Toolchain = GCC53 Active Platform = /Users/fusion71au/src/CloverBootloader/Clover.dsc ......... done! Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiLib/UefiLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf [X64] [CC] UefiRuntimeServicesTableLib [CC] DriverEntryPoint [CC] Acpi [NASM] CpuFlushTlb [SLINK] UefiDriverEntryPoint Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64] [SLINK] UefiRuntimeServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BasePrintLib/BasePrintLib.inf [X64] /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:142:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 142 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreeAlignedPages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:343:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 343 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePool': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:810:17: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 810 | EFI_STATUS Status; | ^~~~~~ [CC] PrintLib [CC] DevicePathFromText [CC] Console [NASM] CpuSleep [SLINK] BaseCpuLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf [X64] [CC] PrintLibInternal [SLINK] BasePrintLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [X64] [CC] CompareMemWrapper [CC] UefiBootServicesTableLib [SLINK] UefiBootServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseLib/BaseLib.inf [X64] cc1: all warnings being treated as errors make: *** [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib/OUTPUT/MemoryAllocationLib.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiLib/UefiLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/BaseLib/BaseLib] build.py... : error F002: Failed to build module /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64, GCC53, RELEASE] - Failed - Build end time: 17:59:15, Sep.12 2019 Build total time: 00:00:15  Unused variable. MemoryAllocationLib.c is not the patched one. ASSERT change argument for RELEASE build, so 'Status' is unused. Should work I guess for DEBUG. Later I'll fix it. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689706 Share on other sites More sharing options...
Slice Posted September 12, 2019 Share Posted September 12, 2019 41 minutes ago, fusion71au said:   @vector sigma's latest commit fixed the "Tool chain [gcc53] is not defined" error, but now I get exactly the same error as @Badruzeus.  With upgrade to gcc9, I get the build log below with ./buildme GCC53 using CloverHackyColor git... fusion71aus-iMac:~ fusion71au$ cd /Users/fusion71au/src/CloverBootloader fusion71aus-iMac:CloverBootloader fusion71au$ ./buildme GCC53 ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 7 [UPDATE CLOVER] Fetching origin From https://github.com/CloverHackyColor/CloverBootloader * branch master -> FETCH_HEAD Already up-to-date. ------------------------------------------------------------------------ buildme, Clover v2.5k r5080 (SHA: b6aadbd) TOOLCHAIN: GCC53 (override example: './buildme GCC53') 1) build Clover 2) make pkg 3) make iso 4) build all 5) test build (no autogen, no boot files) 6) status 7) update Clover 8) update Clover (reset changes) 9) show diff 10) open drivers directory 11) clean BaseTools 12) quit Please enter your choice: 1 Loading previous configuration from /Users/fusion71au/src/CloverBootloader/Conf/BuildEnv.sh WORKSPACE: /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH: /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH: /Users/fusion71au/src/CloverBootloader/Conf [BUILD CLOVER] TOOLCHAIN_DIR: /Users/fusion71au/src/opt/local NASM_PREFIX: /Users/fusion71au/src/opt/local/bin/ NASM_VER: 2.14.02 Building from: /Users/fusion71au/src/CloverBootloader Running edk2 build for CloverX64 using the command: build --conf=/Users/fusion71au/src/CloverBootloader/Conf -D USE_LOW_EBDA -p Clover.dsc -a X64 -b RELEASE -t GCC53 -n 5 Build environment: Darwin-16.7.0-x86_64-i386-64bit Build start time: 17:59:00, Sep.12 2019 WORKSPACE = /Users/fusion71au/src/CloverBootloader EDK_TOOLS_PATH = /Users/fusion71au/src/CloverBootloader/BaseTools CONF_PATH = /Users/fusion71au/src/CloverBootloader/Conf Architecture(s) = X64 Processing meta-data .Build target = RELEASE Toolchain = GCC53 Active Platform = /Users/fusion71au/src/CloverBootloader/Clover.dsc ......... done! Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseCpuLib/BaseCpuLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiLib/UefiLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf [X64] Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf [X64] [CC] UefiRuntimeServicesTableLib [CC] DriverEntryPoint [CC] Acpi [NASM] CpuFlushTlb [SLINK] UefiDriverEntryPoint Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64] [SLINK] UefiRuntimeServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BasePrintLib/BasePrintLib.inf [X64] /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:142:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 142 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreeAlignedPages': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:343:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 343 | EFI_STATUS Status; | ^~~~~~ /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c: In function 'FreePool': /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:810:17: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 810 | EFI_STATUS Status; | ^~~~~~ [CC] PrintLib [CC] DevicePathFromText [CC] Console [NASM] CpuSleep [SLINK] BaseCpuLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf [X64] [CC] PrintLibInternal [SLINK] BasePrintLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [X64] [CC] CompareMemWrapper [CC] UefiBootServicesTableLib [SLINK] UefiBootServicesTableLib Building ... /Users/fusion71au/src/CloverBootloader/MdePkg/Library/BaseLib/BaseLib.inf [X64] cc1: all warnings being treated as errors make: *** [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib/OUTPUT/MemoryAllocationLib.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiLib/UefiLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/fusion71au/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/BaseLib/BaseLib] build.py... : error F002: Failed to build module /Users/fusion71au/src/CloverBootloader/MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf [X64, GCC53, RELEASE] - Failed - Build end time: 17:59:15, Sep.12 2019 Build total time: 00:00:15  I committed changes to  MemoryAllocationLib. Clover can't be build to DEBUG and this library was wrong for RELEASE. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689707 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 (edited) 10 hours ago, ellaosx said: can you show us an example of content of the script? Sure. Copy Scripts to ~/src/tools/  P.S. ATM only for github Clover, and please update Clover to latest before try. Edited September 12, 2019 by vector sigma 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689715 Share on other sites More sharing options...
Zenith432 Posted September 12, 2019 Share Posted September 12, 2019 (edited) @fusion71au: Add the line #pragma GCC diagnostic ignored "-Wunused-but-set-variable" in MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c to silence the warning. Edited September 12, 2019 by Zenith432 1 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689716 Share on other sites More sharing options...
Badruzeus Posted September 12, 2019 Share Posted September 12, 2019 8 minutes ago, Zenith432 said: @fusion71au: Add the line #pragma GCC diagnostic ignored "-Wunused-but-set-variable" in MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c to silence the warning. also in all of these? /Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/MdePkg/Library/UefiLib/UefiLib.c:143:15: error: variable 'Status' set but not used [-Werror=unused-but-set-variable] 143 | EFI_STATUS Status; | ^~~~~~ [CC] BitField [CC] CopyMemWrapper [NASM] IoFifo [CC] CheckSum [SLINK] BaseIoLibIntrinsic [CC] IsZeroBufferWrapper Building ... /Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf [X64] [CC] ChkStkGcc [CC] DebugLib [CC] MemLibGeneric [SLINK] BaseDebugLibNull [CC] Cpu Building ... /Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64] [CC] MemLibGuid [CC] CpuDeadLoop cc1: all warnings being treated as errors make: *** [/Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiLib/UefiLib/OUTPUT/UefiLib.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/UefiLib/UefiLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib] build.py... : error 7000: Failed to execute command make tbuild [/Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/MdePkg/Library/BaseLib/BaseLib] build.py... : error F002: Failed to build module /Users/badruzeus/Projects/CloverHackyColor/CloverBootloader/MdePkg/Library/UefiLib/UefiLib.inf [X64, GCC53, RELEASE] - Failed -  Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689717 Share on other sites More sharing options...
Zenith432 Posted September 12, 2019 Share Posted September 12, 2019 There is somthing wrong with the settings in the github repository In sf.net svn Patches_for_EDK2/Conf/tools_def.txt DEFINE GCC46_IA32_CC_FLAGS = DEF(GCC45_IA32_CC_FLAGS) -Wno-address -Wno-unused-but-set-variable DEFINE GCC46_X64_CC_FLAGS = DEF(GCC45_X64_CC_FLAGS) -Wno-unused-but-set-variable -mabi=ms So -Wunused-but-set-variable is disabled for all GCC46 and later (including GCC53). In CloverHackyColor tools_def.txt I see this warning disabled for GCC48 ONLY, but not for any other version of GCC RELEASE_GCC48_X64_CC_FLAGS = DEF(GCC48_X64_CC_FLAGS) -Os -Wno-unused-but-set-variable So adding the pragma in the source files to silence the warning should not be necessary. It is tools_def.txt settings for GCC that are not synchronized with sf.net for proper GCC compilation. 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689719 Share on other sites More sharing options...
Slice Posted September 12, 2019 Share Posted September 12, 2019 OK, I committed this. Look please if it is good. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689733 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 14 minutes ago, Slice said: OK, I committed this. Look please if it is good. [CC] FixBiosDsdt /Users/vectorsigma/src/CloverBootloader/rEFIt_UEFI/Platform/HdaCodecDump.c: In function 'SaveHdaDumpTxt': /Users/vectorsigma/src/CloverBootloader/rEFIt_UEFI/Platform/HdaCodecDump.c:349:12: error: 'Status' may be used uninitialized in this function [-Werror=maybe-uninitialized] 349 | return Status; | ^~~~~~ [CC] Hotkey cc1: all warnings being treated as errors make: *** [/Users/vectorsigma/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/rEFIt_UEFI/refit/OUTPUT/Platform/HdaCodecDump.obj] Error 1 build.py... : error 7000: Failed to execute command make tbuild [/Users/vectorsigma/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/rEFIt_UEFI/refit] build.py... : error F002: Failed to build module I guess this can be solved in code.. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689738 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 Now is ok. 1 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689745 Share on other sites More sharing options...
Slice Posted September 12, 2019 Share Posted September 12, 2019 Size of CLOVERX64.efi by XCODE8 = 941. by VS2017 = 920 What about GCC53? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689752 Share on other sites More sharing options...
vector sigma Posted September 12, 2019 Share Posted September 12, 2019 (edited) 3 minutes ago, Slice said: What about GCC53? 944, but i'm not sure link time optimizations is turned on. Edited September 12, 2019 by vector sigma Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689753 Share on other sites More sharing options...
Badruzeus Posted September 12, 2019 Share Posted September 12, 2019 5 minutes ago, Slice said: Size of CLOVERX64.efi by XCODE8 = 941. by VS2017 = 920 What about GCC53? About 833 KB, seems bit different under Linux GCC. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/802/#findComment-2689757 Share on other sites More sharing options...
Recommended Posts