Jump to content

 [GUIDE] SNOW on Abit IP35-Pro! (ICH9-R)

ricola

By ricola,
in OSx86 10.6 (Snow Leopard)

 Share
360 posts in this topic

Recommended Posts

2ndx
2ndx
Posted
Posted 

bash-3.2# diskutil repairpermissions /snow
Started verify/repair permissions on disk1s2 snow
No packages can be found for this disk
Error: -9900: No installer packages can be found for this disk
Underlying error: 20: POSIX reports: Not a directory
bash-3.2#

 

Hi

-Ricola

When i boot up in 10.5 i use boot 132 to do so still... i install the bsd.pkg from 10.5 and install it in to my 10.6 "snow" hd... when i try to run diskutil repairpermissions in terminal.... i get this error see code... any ideas?

 

Thanks,

 

2ndx

Link to comment
Share on other sites
2ndx
2ndx
Posted
Posted 

Repairing permissions for “snow”
No packages can be found for this disk.
Error: No installer packages can be found for this disk
Permissions repair complete

 

-Ricola

 

This is the output that disk utility says when i use it in 10.6 under safe mode... still havent been able to boot normal... could any of my problems be related to my gpu card?

 

thanks

2ndx

Link to comment
Share on other sites
arko27
arko27
Posted
Posted

Everyting working great, and audio working but when booting i have this on screen. Help to solve this?

Thanks ricola for great guide

 

 

 

 

 

 

 

Sep 13 20:45:18 -iMac kernel[0]: Previous Shutdown Cause: 3

Sep 13 20:45:19 -iMac kernel[0]: Waiting for DSMOS...

Sep 13 20:45:19 -iMac kernel[0]: NVDANV50HAL loaded and registered.

Sep 13 20:45:21 -iMac kernel[0]: DSMOS has arrived

Sep 13 20:45:21 -iMac kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b3:f6:8e

Sep 13 20:45:21 -iMac kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b3:f6:8f

Sep 13 20:45:26 -iMac kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Sep 13 20:45:26 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit

Sep 13 20:45:28: --- last message repeated 3 times ---

Sep 13 20:45:28 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit

Sep 13 20:45:28: --- last message repeated 15 times ---

Sep 13 20:45:28 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit

Sep 13 20:45:28: --- last message repeated 2 times ---

Sep 13 20:45:28 -iMac kernel[0]: AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT

Sep 13 20:45:33 -iMac kernel[0]: NTFS driver 3.0 [Flags: R/W].

Sep 13 20:45:33 -iMac kernel[0]: NTFS volume name Windows XP, version 3.1.

Sep 13 20:45:34 -iMac kernel[0]: NTFS volume name Data backup, version 3.1.

Sep 13 20:46:21 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit

Sep 13 20:46:50 -iMac kernel[0]: systemShutdown true

Link to comment
Share on other sites
ricola
ricola
Posted
  • Author
Posted

@Froboz - you're welcome :thumbsup_anim:

 

@arko27 - so you got it worked but took you more than a minute to boot .. Apparently the NTFS (paragon/NTSF-3G) caused it .. you can uninstall them and use SL built-in capabilty to handle NTFS. This is how :

25z2tfr.jpg

  • create (or if exists: edit) the file /etc/fstab
  • type in terminal sudo nano /etc/fstab
  • in it put the following statement: LABEL={ntsf-volume-label} none ntfs rw
    LABEL=Windows 7 none ntfs rw
  • or UUID=paste_the_ntfs_uuid_here none ntfs rw
    UUID=9B449153-3466-3B44-AEB4-DE6C2F2A50D2 none ntfs rw
  • control + O enter to save
  • control + X enter to exit
  • reboot

 

-ricola

Link to comment
Share on other sites
arko27
arko27
Posted
Posted

Not working, and i dont have installed paragon ntfs

 

Sep 14 22:01:16 localhost kernel[0]: MAC Framework successfully initialized

Sep 14 22:01:16 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers

Sep 14 22:01:16 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87

Sep 14 22:01:16 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] (S3)

Sep 14 22:01:16 localhost kernel[0]: HPET: probeHPET() failed

Sep 14 22:01:16 localhost kernel[0]: netkas presents fakesmc, a kext which emulates smc device

Sep 14 22:01:16 localhost kernel[0]: Not loading kext com.apple.driver.AppleHDAController - not found and kextd not available in early boot.

Sep 14 22:01:16 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)

Sep 14 22:01:16 localhost kernel[0]: mbinit: done (64 MB memory set for mbuf pool)

Sep 14 22:01:16 localhost kernel[0]: From path: "uuid",

Sep 14 22:01:16 localhost kernel[0]: Waiting for boot volume with UUID D94B554F-E4F2-3D7F-8C4F-30E908DB0E63

Sep 14 22:01:16 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

Sep 14 22:01:16 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

Sep 14 22:01:16 localhost kernel[0]: FireWire runtime power conservation disabled. (2)

Sep 14 22:01:16 localhost kernel[0]: FireWire (OHCI) TI ID 8023 PCI now active, GUID 00508d00009b6e8e; max speed s400.

Sep 14 22:01:16 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1600AAJS-00WAA0 Media/IOFDiskPartitionScheme/Untitled 2@2

Sep 14 22:01:16 localhost kernel[0]: BSD root: disk1s2, major 14, minor 5

Sep 14 22:01:16 localhost kernel[0]: Kernel is LP64

Sep 14 22:01:18 localhost kernel[0]: systemShutdown false

Sep 14 22:01:22 localhost kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.

Sep 14 22:01:25 -iMac kernel[0]: Previous Shutdown Cause: 3

Sep 14 22:01:25 -iMac kernel[0]: Waiting for DSMOS...

Sep 14 22:01:26 -iMac kernel[0]: NVDANV50HAL loaded and registered.

Sep 14 22:01:27 -iMac kernel[0]: DSMOS has arrived

Sep 14 22:01:27 -iMac kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b3:f6:8e

Sep 14 22:01:27 -iMac kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b3:f6:8f

Sep 14 22:01:32 -iMac kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

Sep 14 22:01:32 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit

Sep 14 22:01:34: --- last message repeated 3 times ---

Sep 14 22:01:34 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit

Sep 14 22:01:35: --- last message repeated 15 times ---

Sep 14 22:01:35 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit

Sep 14 22:01:35: --- last message repeated 2 times ---

Sep 14 22:01:35 -iMac kernel[0]: AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT

Sep 14 22:01:40 -iMac kernel[0]: NTFS driver 3.0 [Flags: R/W].

Sep 14 22:01:40 -iMac kernel[0]: NTFS volume name Windows XP, version 3.1.

Sep 14 22:01:40 -iMac kernel[0]: NTFS volume name Data backup, version 3.1.

Sep 14 22:02:29 -iMac kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit

Sep 14 22:03:03 -iMac kernel[0]: NTFS-fs warning (device /dev/disk0s1, pid 91): ntfs_inode_afpinfo_cache(): AFP_AfpInfo data attribute of mft_no 0xe28f contains invalid data (wrong signature, wrong version, or wrong size), ignoring and using defaults.

Sep 14 22:03:03 -iMac kernel[0]: NTFS-fs warning (device /dev/disk0s1, pid 91): ntfs_inode_afpinfo_cache(): AFP_AfpInfo data attribute of mft_no 0xe647 contains invalid data (wrong signature, wrong version, or wrong size), ignoring and using defaults.

Sep 14 22:03:03 -iMac kernel[0]: NTFS-fs warning (device /dev/disk0s1, pid 91): ntfs_inode_afpinfo_cache(): AFP_AfpInfo data attribute of mft_no 0xe64c contains invalid data (wrong signature, wrong version, or wrong size), ignoring and using defaults.

Sep 14 22:03:03 -iMac kernel[0]: NTFS-fs warning (device /dev/disk0s1, pid 91): ntfs_inode_afpinfo_cache(): AFP_AfpInfo data attribute of mft_no 0x2a93 contains invalid data (wrong signature, wrong version, or wrong size), ignoring and using defaults.

 

 

Another problem, wrong info in SL, ok in Leopard

post-193079-1252959042_thumb.png

post-193079-1252959070_thumb.png

post-193079-1252959090_thumb.png

post-193079-1252959099_thumb.png

Link to comment
Share on other sites
mattswell
mattswell
Posted
Posted

ricola,

 

Here's a typical successful boot kernel log. The unsuccessful boots don't write to the kernel log, so I can't paste them...

 

Sep 14 18:48:33 localhost kernel[0]: npvhash=4095
Sep 14 18:48:33 localhost kernel[0]: Darwin Kernel Version 10.0.0: Fri Jul 31 22:46:25 PDT 2009; root:xnu-1456.1.25~1/RELEASE_X86_64
Sep 14 18:48:33 localhost kernel[0]: vm_page_bootstrap: 964818 free pages and 83758 wired pages
Sep 14 18:48:33 localhost kernel[0]: kext submap [0xffffff7f80600000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000600000]
Sep 14 18:48:33 localhost kernel[0]: standard timeslicing quantum is 10000 us
Sep 14 18:48:33 localhost kernel[0]: mig_table_max_displ = 73
Sep 14 18:48:33 localhost kernel[0]: [SleepEnabler] Registering PowerManagement dispatch table...
Sep 14 18:48:33 localhost kernel[0]: [SleepEnabler] Calling pmInitComplete()...
Sep 14 18:48:33 localhost kernel[0]: NullCPUPowerManagement::init: properties=0xffffff8009bd47c0
Sep 14 18:48:33 localhost kernel[0]: NullCPUPowerManagement::start
Sep 14 18:48:33 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Sep 14 18:48:33 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Sep 14 18:48:33 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=3 Enabled
Sep 14 18:48:33 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled
Sep 14 18:48:33 localhost kernel[0]: calling mpo_policy_init for Quarantine
Sep 14 18:48:33 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Sep 14 18:48:33 localhost kernel[0]: calling mpo_policy_init for Sandbox
Sep 14 18:48:33 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Sep 14 18:48:33 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Sep 14 18:48:33 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Sep 14 18:48:33 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep 14 18:48:33 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Sep 14 18:48:33 localhost kernel[0]: MAC Framework successfully initialized
Sep 14 18:48:33 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Sep 14 18:48:33 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Sep 14 18:48:33 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Sep 14 18:48:33 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)
Sep 14 18:48:33 localhost kernel[0]: HPET: probeHPET() failed
Sep 14 18:48:33 localhost kernel[0]: netkas presents fakesmc, a kext which emulates smc device
Sep 14 18:48:33 localhost kernel[0]: mbinit: done (64 MB memory set for mbuf pool)
Sep 14 18:48:33 localhost kernel[0]: From path: "uuid", 
Sep 14 18:48:33 localhost kernel[0]: Waiting for boot volume with UUID 31BF7AAF-72A2-303E-B204-F74563B73BD0
Sep 14 18:48:33 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Sep 14 18:48:33 localhost kernel[0]: Not loading kext com.apple.driver.AppleHDAController - not found and kextd not available in early boot.
Sep 14 18:48:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Sep 14 18:48:33 localhost kernel[0]: FireWire runtime power conservation disabled. (2)
Sep 14 18:48:33 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleAHCI/SECD@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOGUIDPartitionScheme/Loki@2
Sep 14 18:48:33 localhost kernel[0]: BSD root: disk0s2, major 14, minor 3
Sep 14 18:48:33 localhost kernel[0]: Kernel is LP64
Sep 14 18:48:33 localhost kernel[0]: FireWire (OHCI) TI ID 8023 PCI now active, GUID 00508d0000b158a6; max speed s400.
Sep 14 18:48:33 localhost kernel[0]: USBMSC Identifier (non-unique): 000223223223 0x424 0x223a 0x360
Sep 14 18:48:35 localhost kernel[0]: Previous Shutdown Cause: 3
Sep 14 18:48:35 localhost kernel[0]: systemShutdown false
Sep 14 18:48:37 Muspelheim kernel[0]: NVDANV50HAL loaded and registered.
Sep 14 18:48:39 Muspelheim kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
Sep 14 18:48:42 Muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit
Sep 14 18:48:43 Muspelheim kernel[0]: DSMOS has arrived
Sep 14 18:48:43 Muspelheim kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b6:10:61
Sep 14 18:48:43 Muspelheim kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:50:8d:b6:10:62
Sep 14 18:48:43 Muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit
Sep 14 18:48:50: --- last message repeated 2 times ---
Sep 14 18:48:43 Muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit
Sep 14 18:48:50: --- last message repeated 15 times ---
Sep 14 18:48:44 Muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 2976 goto Exit
Sep 14 18:48:50: --- last message repeated 2 times ---
Sep 14 18:48:48 Muspelheim kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Sep 14 18:48:50 Muspelheim kernel[0]: AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT
Sep 14 18:48:55 Muspelheim kernel[0]: NTFS driver 3.0 [Flags: R/W].
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS volume name Win7, version 3.1.
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS-fs warning (device /dev/disk1s2, pid 352): ntfs_mft_record_sync(): $MFT inode is missing from volume.
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS-fs error (device /dev/disk1s2, pid 352): ntfs_inode_sync(): Failed to sync mft_no 0x5 (error 45).  Run chkdsk.
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS-fs warning (device /dev/disk1s2, pid 352): ntfs_mft_record_sync(): $MFT inode is missing from volume.
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS-fs error (device /dev/disk1s2, pid 352): ntfs_inode_sync(): Failed to sync mft_no 0x5 (error 45).  Run chkdsk.
Sep 14 18:48:56 Muspelheim kernel[0]: NTFS-fs error (device /dev/disk1s2, pid 352): ntfs_vnop_inactive(): Failed to sync mft_no 0x5, type 0xa0, name_len 0x4 (error 45).
Sep 14 18:48:57 muspelheim kernel[0]: NTFS volume name Scratch, version 3.1.
Sep 14 18:49:37 muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit
Sep 14 19:01:45 muspelheim kernel[0]: NTFS driver 3.0 [Flags: R/W].
Sep 14 19:01:46 muspelheim kernel[0]: NTFS volume name Scratch, version 3.1.
Sep 14 19:01:51 muspelheim kernel[0]: NTFS volume name Win7, version 3.1.
Sep 14 19:04:08 muspelheim kernel[0]: AFP_VFS afpfs_mount: /Volumes/mattswell, pid 509
Sep 14 19:49:46 muspelheim kernel[0]: IOHIDSystem::relativePointerEventGated: VBL too high (100516344), capping to 20000000
Sep 14 19:50:27 muspelheim kernel[0]: Sound assertion "0 == entry" failed in "/SourceCache/AppleHDA/AppleHDA-174.1.1/AppleHDA/AppleHDAEngine.cpp" at line 3009 goto Exit

Link to comment
Share on other sites
MrSco
MrSco
Posted
Posted

Thanks Ricola! up and running on 10.6.1 for some days now and no "major" issues... but still some annoying ones...

 

1. Pandora One Adobe Air app is "finicky" with remembering to start on login (System Pref/Accounts/Login Items). It works sometimes and most of the time it doesn't. The entry is missing. i've re-added 3 or 4 times now... (other apps seem to start fine... adium, remote volumes, etc)

 

2. CD/DVD ejection issues....I have two sata optical drives. a burner and a dvdrom. after burning a disc in particular using built-in DiskUtility or Finder, i'm unable to eject the disc. Disc isn't on desktop and missing from Disk Utility... weird stuff. don't wanna have to use paper clip...

 

*I'm not sure if these two problems existed before 10.6.1 update... i only had a day or so before i upgraded. could these be upgrade issues? Although i did install illustrator cs3 around the same time... isn't cs3 known capatibility issues with snow?*

 

3. Keyboard and Mouse mappings... usb overdrive is the only tool i know of that will map the back and forward buttons on my logitech mouse... and it isn't compatible yet... any way to do this native? Edit a plist somewhere?... on my keyboard its just things like, Home and End keys or just text navigation in general with keyboard shortcuts.. .control to skip words... any way to change these behaviors?

 

Other than those it runs very very fast. haven't had a kp yet (knock on wood). go snow!

 

-mrsco

Link to comment
Share on other sites
onemanstrash
onemanstrash
Posted
Posted

well this is directed at waveman. I have an evga 8800gts 640 as well. I have a perfect install. 10.6.1 and all seems to be working. I'm very happy but when i go to use my calibration assistant the sliders do nothing. This is a first for me. I've tried different boot.plist strings, in 64 and 32. I've run nvenabler, nvinject, and even nvkush in -x32. All the same. When i used the kexts i had removed the boot.plist string.

 

The performance was always the same. Everything works except calibration. I have two lcds hooked up to my dual dvi ports. I guess i'm going to try and use a different gfx card and see what happens. Maybe it's just this particular model that you and i seam to have. I also added the nvcaps from nvkush to see if that helped but there was no noticeable difference. I really hope to get this solved as i'm very happy with how snappy snow is. I got a 552 point increase in geekbench even in -x32 mode

 

:D

 

EP45-UD3R, e8400, 8800 gts 640

Link to comment
Share on other sites
pkmoazzam
pkmoazzam
Posted
Posted

hello Ricola

 

i am deaf. i got a macbook pro comes with the snow leopard dvd. i am trying to install it on my ip35 pro same as yours. i changed the bios -- RAID to AHCI and running chameleon v2.0-rc3 r655. inserted snow leopard dvd in then press F5 and type -f -v with 64bit then enter. it ran like crazy till stop at

 

"kext com apple dont steal mac os x cant unload - module stop returned oxdc008007"

 

i did try arch=i386 for 32bit, it is the same errors. damn, almost to the snow leopard installer. whats up with it?

 

i been using 10.5.X on ip35 for a few months

 

ip35 pro motherboard

 

intel E8400

 

4gb ram

 

230gb sata hdd

 

ati HD4870

 

 

 

sorry for my english

Link to comment
Share on other sites
onemanstrash
onemanstrash
Posted
Posted
well this is directed at waveman. I have an evga 8800gts 640 as well. I have a perfect install. 10.6.1 and all seems to be working. I'm very happy but when i go to use my calibration assistant the sliders do nothing. This is a first for me. I've tried different boot.plist strings, in 64 and 32. I've run nvenabler, nvinject, and even nvkush in -x32. All the same. When i used the kexts i had removed the boot.plist string.

 

The performance was always the same. Everything works except calibration. I have two lcds hooked up to my dual dvi ports. I guess i'm going to try and use a different gfx card and see what happens. Maybe it's just this particular model that you and i seam to have. I also added the nvcaps from nvkush to see if that helped but there was no noticeable difference. I really hope to get this solved as i'm very happy with how snappy snow is. I got a 552 point increase in geekbench even in -x32 mode

 

:D

 

EP45-UD3R, e8400, 8800 gts 640

 

ok problem solved (sort of) I put my 9500 gt from my other rig in and it worked like a charm. I can use the calibration assistant to adjust the monitors again. And i have a correction: i have a BFG 8800 gts 640, not an EVGA. So the 8800 gts 640 goes into my leopard 10.5.7 rig for music editing for now.

Link to comment
Share on other sites
ricola
ricola
Posted
  • Author
Posted
hello Ricola

 

i am deaf. i got a macbook pro comes with the snow leopard dvd. i am trying to install it on my ip35 pro same as yours. i changed the bios -- RAID to AHCI and running chameleon v2.0-rc3 r655. inserted snow leopard dvd in then press F5 and type -f -v with 64bit then enter. it ran like crazy till stop at

 

"kext com apple dont steal mac os x cant unload - module stop returned oxdc008007"

 

i did try arch=i386 for 32bit, it is the same errors. damn, almost to the snow leopard installer. whats up with it?

 

i been using 10.5.X on ip35 for a few months

 

ip35 pro motherboard

 

intel E8400

 

4gb ram

 

230gb sata hdd

 

ati HD4870

 

 

 

sorry for my english

 

With my files here, you can boot directly to 64 bit , issues might be come from your HD4870 ... back-up and delete S/L/E/ATI*.kext to get firtstime boot and deal with your VGA later :( (search this forum for your spesific card)

 

-ricola

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...