slipstream Posted April 19, 2006 Share Posted April 19, 2006 Thnx tokyovigilante, I'm trying the SpeedBoost section ideas right now (in VMware first). We'll see how it goes. i installed 10.45 and 4.6 and both times it said what yours said it my cpu is a 2.4ghz p4 so it sounds normal to me Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99125 Share on other sites More sharing options...
domino Posted April 19, 2006 Author Share Posted April 19, 2006 I do have a question though for anyone who can answer. Why does my 2.4Celeron D show as being 3.06ghz in About This Mac? My 2.8 P4 shows 3.07 not overclocked. It's always that way since 10.4.4 for some people. Don't worry about. Just don't keep looking at the processor speed . Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99130 Share on other sites More sharing options...
borez Posted April 19, 2006 Share Posted April 19, 2006 I see that the VIAPATA.kext has been added in for nForce users. Not sure if I am updated, but this kext is still highly unstable right? For those nForce users with their data drives on SATA, install it at your own risk.. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99134 Share on other sites More sharing options...
Tek_No Posted April 19, 2006 Share Posted April 19, 2006 Same for me: P4 2.8 ghz Northwood showing as 3.07 ghz... Don't worry... Be happy!!! Btw: I'm also seeding... Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99140 Share on other sites More sharing options...
leoedin Posted April 19, 2006 Share Posted April 19, 2006 I've just finished DLing the PB one, and I'm seeding. Leo Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99145 Share on other sites More sharing options...
anGler Posted April 19, 2006 Share Posted April 19, 2006 Download still finished last night, now seeding for a couple of days! Since yesterday I uploaded ~8,1GB and still running... Will now install JaS 10.4.6 on my Fujitsu Siemens Amilo 3438G and hope that the Via SATA will work now in a independend installation. VMWare works fine and runs really FAAAAAAST Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99181 Share on other sites More sharing options...
Zach Thomas Posted April 19, 2006 Share Posted April 19, 2006 I just finished downloading, now seeding. What was everyone elses MD5 checksum? I got 5C88E09705EBDE2BAF1BF19832BDD37A *10.4.6.install.dvd.iso Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99502 Share on other sites More sharing options...
mesut Posted April 19, 2006 Share Posted April 19, 2006 I just installed it, but it doesnt have AppleIntel830.kext. where can i get it ? Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99583 Share on other sites More sharing options...
xp1700 Posted April 19, 2006 Share Posted April 19, 2006 Will now install JaS 10.4.6 on my hp pavilion dv1315cl but 1 bug dvd player dont work the screen stay black my graphic is gma 900 befor the dvd work perfecly please test the dvd player on gma 900 whit install dvd 10.4.6 all the rest work perfecly tanks for response excuse for my english Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99628 Share on other sites More sharing options...
asapreta Posted April 19, 2006 Share Posted April 19, 2006 An offtopic, but related question: Is there a way to skip DVD Checking at installation? Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99639 Share on other sites More sharing options...
JaS Posted April 20, 2006 Share Posted April 20, 2006 Ok guys I have just released a ppf for this iso to add ATI ATA support.The new ppf also removes the need for running the amd enabler after the install as it was causing some issues.And some have reported a b0 error so I have fixed that for those users.So if you fit these groups get the new ppf and apply it to the iso before you install you can find it in the ususal places JaS.10.4.6.Install.Dvd.PPF1 Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99647 Share on other sites More sharing options...
systimax Posted April 20, 2006 Share Posted April 20, 2006 If im running a intel only chip.. a Hp dc7100 which is almost identical to the original dev box...is it fine just to select the decryp files and the SSe3 only. When i do that since I dont have a amd usb sound and the other stuff at the end it says install failed try again. My question is should i just enable it all even though i dont have the rest of it? Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99686 Share on other sites More sharing options...
asapreta Posted April 20, 2006 Share Posted April 20, 2006 Ok guys I have just released a ppf for this iso to add ATI ATA support.The new ppf also removes the need for running the amd enabler after the install as it was causing some issues.And some have reported a b0 error so I have fixed that for those users.So if you fit these groups get the new ppf and apply it to the iso before you install you can find it in the ususal places JaS.10.4.6.Install.Dvd.PPF1 If this patch is installed for those who aren´t on this group, any problems? Only to have a "definitive" 10.4.6 DVD. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99696 Share on other sites More sharing options...
92GTA Posted April 20, 2006 Share Posted April 20, 2006 OMFG Jas IS THE MAN!!!!! I just installed the original version as I have a non-ATI chipset. My 3.2HT Northwood is SCREAMING fast like never before, it's wicked insaine! The install went great and everything seems to working as well as it did for me under 10.4.5 DO NOT INTALL THE ATI MOBILITY PACKAGE DURING INSTALL!!!!! I have in fact an M10/M11 9600/9700 128MB in my notebook. It showed up as supported just fine with 10.4.5 but I thought I would try the ATI Mobility bundle that JaS put into the image, BAD IDEA! It furbard everything! Upon initial boot after the install everything was yellow/red/green/blue/etc. blocks and totall unreadable as the bloks were all throughout the screen. I thought I screwed up so I did a complete reinstall again, same problem. so I repeat, if your ATI card worked just fine under other OS X installs, DO NOT INTALL THE ATI MOBILITY PACKAGE. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99700 Share on other sites More sharing options...
korosu Posted April 20, 2006 Share Posted April 20, 2006 An offtopic, but related question: Is there a way to skip DVD Checking at installation? sure, there's a "skip" button. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99702 Share on other sites More sharing options...
JaS Posted April 20, 2006 Share Posted April 20, 2006 DO NOT INTALL THE ATI MOBILITY PACKAGE DURING INSTALL!!!!! I have in fact an M10/M11 9600/9700 128MB in my notebook. It showed up as supported just fine with 10.4.5 but I thought I would try the ATI Mobility bundle that JaS put into the image, BAD IDEA! It furbard everything! Upon initial boot after the install everything was yellow/red/green/blue/etc. blocks and totall unreadable as the bloks were all throughout the screen. I thought I screwed up so I did a complete reinstall again, same problem. so I repeat, if your ATI card worked just fine under other OS X installs, DO NOT INTALL THE ATI MOBILITY PACKAGE. Yeah that is more for some users with ATI mobility and AMD system that were geting a black screen after the install Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99703 Share on other sites More sharing options...
asapreta Posted April 20, 2006 Share Posted April 20, 2006 sure, there's a "skip" button. Man, am I blind? I never saw it! Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99707 Share on other sites More sharing options...
theSpam Posted April 20, 2006 Share Posted April 20, 2006 Ok guys I have just released a ppf for this iso to add ATI ATA support.The new ppf also removes the need for running the amd enabler after the install as it was causing some issues.And some have reported a b0 error so I have fixed that for those users.So if you fit these groups get the new ppf and apply it to the iso before you install you can find it in the ususal places JaS.10.4.6.Install.Dvd.PPF1 If this patch is installed for those who aren´t on this group, any problems?Only to have a "definitive" 10.4.6 DVD. JaS, I too would like to have this question answered. Thanks! Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99711 Share on other sites More sharing options...
JaS Posted April 20, 2006 Share Posted April 20, 2006 JaS, I too would like to have this question answered. Thanks! If you dont fit into that group then you dont need the latest ppf Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99713 Share on other sites More sharing options...
borez Posted April 20, 2006 Share Posted April 20, 2006 If you dont fit into that group then you dont need the latest ppf Hi, Just to check, for those AMD users with the MyZar 10.4.5, you would still need both the initial 10.4.6-Jas PPF and this? Or would this new JaS.10.4.6.Install.Dvd.PPF1 suffice? Thanks.. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99717 Share on other sites More sharing options...
meguro Posted April 20, 2006 Share Posted April 20, 2006 Question: Could I use DiskUtility to create a bootable new partition with the installatioin DVD? or I have to create a new partition with a 10.4.3 first. I experienced problems with the 10.4.4 patched DVD before. Thanks! Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99791 Share on other sites More sharing options...
saywhat Posted April 20, 2006 Share Posted April 20, 2006 Hello all, I'm very new to this scene (installed 10.4.1 last week) so please pardon me if I don't word this right. I downloaded the 10.4.6 JaS install DVD (and seeded). After verifying the md5 matched, I burned a DVD and tried to install. My machine is currently set up with my CD Rom as secondary master with my DVD drive as secondary slave. To get it to boot (to DCD) I just disabled my CD Rom in the bios and 10.4.1 installed perfectly. With 10.4.6 however, I am getting the "Still waiting for boot device". Any ideas why I would be getting this error now when things went so well with 10.4.1?? Sorry if I left out any critical info, let me know if I can provide any more. Thanks in advance guys and I really admire the people bringing us these wonderful advancements!!! Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99793 Share on other sites More sharing options...
Mac OSX Coder Posted April 20, 2006 Share Posted April 20, 2006 Just finished downloading. Since I am running a AMD Opteron 165, I am lost at this point where the AMD enabler stands. Do i need to download the install dvd ppf? how about amd enabler. Doing a fresh install. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99807 Share on other sites More sharing options...
mede Posted April 20, 2006 Share Posted April 20, 2006 I downloaded JaS's 10.4.6 Install DVD and installed it. But my Mobility x600 don't work. :-( I can't change desktop resultsion. Who release the simple "patch.ati.mobility.radeon.pkg"? :-) Because I don't able to hexedit the kexts. My English is little. HP Pavilion ZD8000 Thanks. Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99850 Share on other sites More sharing options...
rdb Posted April 20, 2006 Share Posted April 20, 2006 perfect 10.4.6 installation here. 3.00ghz P4 Northwood (SSE 2) ASUS P4P8T 1024mb Corsair xms Radeon 9600 Pro GFX although i don't appear to have any sound, just got the onboard p4p8t sound card Link to comment https://www.insanelymac.com/forum/topic/15178-jas-1046-install-dvd/page/4/#findComment-99925 Share on other sites More sharing options...
Recommended Posts