Jump to content

XxX_x86_10.5.6_Install_Disc_Universal_Final.v2

BlackCH

By BlackCH,
in OSx86 10.5 (Leopard)

 Share
661 posts in this topic

Recommended Posts

Wils
Wils
Posted
Posted

Best distro so far. Besides the default selections, I need to select AnV kernel, AppleVIAATA, NVinject, kxAudio.

I also need to add my SATA controller dev ID into AppleVIAATA.kext to get SATA working. It's 0x33491106

Link to comment
Share on other sites
nara7803699
nara7803699
Posted
Posted

HI ,BLACKCH

My computer is HP 540:

Celeron Dual-Core T1400(1.73G) 512KB L2

X3100(ID:2A12)

1G DDR2 667

Broadcom 4310 Wireless

ADI1981 HD integrated audio

Intel 82562GT

 

I see my HP540 Hardware is very similar with your compaq 6720s

So I want to know which do you select in the XxX..final V2.

And I will Reference to your proposal

 

Other question to ask .. Can your 6720s brightness control working fine? I cannot Regulation

 

I am Chinese so my English is poor . Sorry..

 

Waiting for your Guidance。

 

Detailed some of the best :(

Link to comment
Share on other sites
Guest cookiez
Guest cookiez
Posted
Posted

Hi BlackCH,

 

I tried to install many times with no success. After installation my computer restarts with the original kernel, with Voodoo 9.5.0 I got "Still waiting for root device" problem. My config as follows. Please help me on customization.

 

Thanks,

cookiez

 

Config:

Asus P4C800-E ICH5R

1GB RAM

Intel Prescott P4 3GHz (MMX, SSE1/2/3)

120GB SATA Seagate hdd

Intel PRO/1000 CT NIC (Intel 82547EI)

ADI AD1985 audio

PS2 mouse, keyboard

ATI 9600 Pro AGP

LG DVD (IDE)

via ohci 1394

nec pci usb controller

Link to comment
Share on other sites
mysterymacperson
mysterymacperson
Posted
Posted

Can anyone help, I have v2 of xxx 10.5.6 universal. It won't boot past the point of loading mkexts, literally just after the Darwin bootloader prompt bit. I tried combinations of mach_kernel_2 cpus=1 platform=acpi -x -v .... and still nothing.

 

My hardware is:

 

Amd Turion 64 x2 RM-70

NVidia Geforce 8200M G

ST9200827A Sata Hard drive

TSSTcorp TS-L633L DVD/CDRW combo

Conexant High Def SmartAudio 221

 

Managed to grab the lspci and lsusb outputs from Ubuntu:

 

lspci -nn :

 

00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP78S [GeForce 8200] High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200] Ethernet [10de:0760] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Link Control [1022:1304]
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8200M G [10de:0845] (rev a2)
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

lsusb :

 

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f2:b091 Chicony Electronics Co., Ltd 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

I was told that any version built on 10.5.6 would be fine for my chipset as the new Macbooks are based on MCP79, and mine is MCP78S.

Is there any way of getting this working, as I have exhausted practically every other distro.

 

Thanks guys! :)

Link to comment
Share on other sites
SoulDesire
SoulDesire
Posted
Posted

any ideas how to run 10.5.6 Final V2 with that specs:

 

Mainboard: K9N Neo / Bios V. 1.3 060206 (Nforce 550 chipset)

CPU: AMD Athlon X2 3800+

Ati Radeon X1650 Pro ( 0x1002/0x71c1)

2 Seagate SATA Drives (ST3120026AS)

 

i always get kernel panics with every kernel i tried.

Link to comment
Share on other sites
Andy Vandijck
Andy Vandijck
Posted
Posted
any ideas how to run 10.5.6 Final V2 with that specs:

 

Mainboard: K9N Neo / Bios V. 1.3 060206 (Nforce 550 chipset)

CPU: AMD Athlon X2 3800+

Ati Radeon X1650 Pro ( 0x1002/0x71c1)

2 Seagate SATA Drives (ST3120026AS)

 

i always get kernel panics with every kernel i tried.

What is there listed in the kernel panic?

I'll try to advise you...

Link to comment
Share on other sites
Antonius138
Antonius138
Posted
Posted

Hello all,

 

I have been bouncing around between 10.5.6 distros as of late. I have an issue with my video displaying correctly when using video apps such as iDVD or DVD Player. Right now when DVD player starts in full screen I get half a page of a crammed DVD menu and it is all out of sync. I do want to point out that I do get full resolution on the desktop and everything else works perfectly. I jsut do not know how to tweak the video very well. I use my hackintosh for video presentations (or at least I did with 10.5.4) and would like for the DVD player to work.

 

Specs...

 

Dell D820 Laptop, Core2 Duo, Intel ICH 9 chipset, 2GB of RAM, Nvidia Quadro 120m

 

Options selected:

 

Apple SMBIOS DDR2 667

 

New ICHx (ICH10)

 

Laptop Display kext

 

NVKush default

 

NVdarwin 256MB

 

NVidia Extended

 

 

 

Any assistance would be helpful thanks!

 

A.

Link to comment
Share on other sites
mysterymacperson
mysterymacperson
Posted
Posted
Can anyone help, I have v2 of xxx 10.5.6 universal. It won't boot past the point of loading mkexts, literally just after the Darwin bootloader prompt bit. I tried combinations of mach_kernel_2 cpus=1 platform=acpi -x -v .... and still nothing.

 

My hardware is:

 

Amd Turion 64 x2 RM-70

NVidia Geforce 8200M G

ST9200827A Sata Hard drive

TSSTcorp TS-L633L DVD/CDRW combo

Conexant High Def SmartAudio 221

 

Managed to grab the lspci and lsusb outputs from Ubuntu:

 

lspci -nn :

 

00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP78S [GeForce 8200] High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200] Ethernet [10de:0760] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Link Control [1022:1304]
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8200M G [10de:0845] (rev a2)
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

lsusb :

 

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f2:b091 Chicony Electronics Co., Ltd 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

I was told that any version built on 10.5.6 would be fine for my chipset as the new Macbooks are based on MCP79, and mine is MCP78S.

Is there any way of getting this working, as I have exhausted practically every other distro.

 

Thanks guys! :gathering:

 

I'd appreciate any help in the slightest to getting *any* distro of OSX working on my laptop, as my iMac packed up quite a while ago and am seriously missing it! Thank you

Link to comment
Share on other sites
BlackCH
BlackCH
Posted
  • Author
Posted
Can anyone help, I have v2 of xxx 10.5.6 universal. It won't boot past the point of loading mkexts, literally just after the Darwin bootloader prompt bit. I tried combinations of mach_kernel_2 cpus=1 platform=acpi -x -v .... and still nothing.

 

My hardware is:

 

Amd Turion 64 x2 RM-70

NVidia Geforce 8200M G

ST9200827A Sata Hard drive

TSSTcorp TS-L633L DVD/CDRW combo

Conexant High Def SmartAudio 221

 

 

I was told that any version built on 10.5.6 would be fine for my chipset as the new Macbooks are based on MCP79, and mine is MCP78S.

Is there any way of getting this working, as I have exhausted practically every other distro.

 

Thanks guys! :wacko:

 

What happens? Just restart after load mkext?

You would have much better chances if you grab a macbook restore disk and do the necessary modifications by yourself. Is not much what you need to add to the disk: Voodoo or AnV kernel and a few kexts.... I dont really have much time these days but I see if I can make a couple of files for you...

Link to comment
Share on other sites
mysterymacperson
mysterymacperson
Posted
Posted
What happens? Just restart after load mkext?

You would have much better chances if you grab a macbook restore disk and do the necessary modifications by yourself. Is not much what you need to add to the disk: Voodoo or AnV kernel and a few kexts.... I dont really have much time these days but I see if I can make a couple of files for you...

No with this distro, it shows the Darwin bootloader, loads up 2 Extension.mkext files, and then just sits there with a flashing cursor, and I haven't the first idea how to add stuff to the disk, but given instructions I'm sure I could work it out. It does look like most of my hardware is on your disk, just the chipset isn't. Are you planning on adding support in the future?

Link to comment
Share on other sites
mysterymacperson
mysterymacperson
Posted
Posted
What happens? Just restart after load mkext?

You would have much better chances if you grab a macbook restore disk and do the necessary modifications by yourself. Is not much what you need to add to the disk: Voodoo or AnV kernel and a few kexts.... I dont really have much time these days but I see if I can make a couple of files for you...

Forgot to say it only shows that its loading those 2 Extension.mkexts when the -v option is passed to the bootloader.

Link to comment
Share on other sites
BlackCH
BlackCH
Posted
  • Author
Posted
I haven't the first idea how to add stuff to the disk, but given instructions I'm sure I could work it out. It does look like most of my hardware is on your disk, just the chipset isn't. Are you planning on adding support in the future?

 

As I said, I dont have really time to work on the ISO now.... And is really difficult to do something without having the actual (your) hardware on my hands

 

theres a full how to here:

http://forum.osx86scene.com/viewtopic.php?f=16&t=1661

Link to comment
Share on other sites
CaptainJack
CaptainJack
Posted
Posted
CaptainJack, use Pacifist. Free program for this kind of thing.

 

Worked great, thanks!

 

I have a question, can running the Apple Software Update cause system instability such as kernel panics? My wireless NIC caused my system to lock up again and it seemed to happen shortly after I did an Apple Software Update. Once I replaced the IO80211family.kext with one from an older version (10.5.2), the lock ups went away. Do Apple Software updates make changes to kext files?

Link to comment
Share on other sites
Il Francy MacPc
Il Francy MacPc
Posted
Posted (edited)

Gosh, I'm having a real bad time connecting by WiFi... DO NOT install AirPort Client Update 2009-001, at least w/ my card. It was supposed to be among the most compatible ones, but after that I had to do a restore install. Even copying extensions back to the previously updated install did not solve at first. I can not remember 100% sure, but I read something about this update breaking some connection channels in real Macs, too.

My other posts reference about this:

Post #7 No Wireless 10.5.6

Post #6 Atheros WiFi 10.5.6 kernal help please

Post #535 What network cards work?, List your network card that runs native.

 

In the new fresh install I noticed something strange: when extracting .zips the Finder does not refresh and show extracted files unless I double click once more on the zip, resulting then folder and folder 2... that's strange.

 

I'll edit my post w/ installed items, I swear ;-)

 

w00t! After upgrading to the last bios (F6) WiFi is working! And AirPort Client Update 2009-001 can be installed too. It's only a matter of saving BIOS CMOS again w/ the same settings when wireless network is not recognized. This happens mostly after switching from Win__ .

Edited by Il Francy MacPc
Link to comment
Share on other sites
iamhappy
iamhappy
Posted
Posted

Is there any info about the "NTFS Support" from the tools section @ installer?

 

edit: i found MacFuse and Ntfs3G related files, but no prefpane + they appear to be pretty old/outdated.

 

any advice how to remove the "NTFS Support" or update it...

Link to comment
Share on other sites
Arial
Arial
Posted
Posted
Is there any info about the "NTFS Support" from the tools section @ installer?

 

edit: i found MacFuse and Ntfs3G related files, but no prefpane + they appear to be pretty old/outdated.

 

any advice how to remove the "NTFS Support" or update it...

I'd prefer to use Paragon NTFS.

 

here are to install/uninstall NTFS-3G

http://hem.bredband.net/catacombae/ntfs-3g/macntfs-3g_userguide.pdf

2.1 Installing NTFS-3G

Installing NTFS-3G is not more complicated than installing any other program, as it uses the

standard Mac OS X package format to install itself.

Just double click the package NTFS-3G.pkg and follow instructions. You will have to provide

administrator credentials to install it, since it needs to place files in protected system folders.

After you have installed the package, you may (in some cases when doing an upgrade) need to

reboot your computer because some parts of Mac OS X tend to cache certain data from the file

system bundle. In other cases, you may just need to unmount your NTFS file systems and remount

them to activate the newly installed NTFS-3G version.

 

2.2 Uninstalling NTFS-3G

NTFS-3G can be easily uninstalled using the Uninstall NTFS-3G... button in the NTFS-3G

preference pane, which should be available in System Preferences once you have installed the

package. See section 4 for a description of the other features in the preference pane.

If this should fail for some reason, an uninstall script exists at the following location:

/System/Library/Filesystems/ntfs-3g.fs/Support/uninstall-ntfs-3g.sh

Link to comment
Share on other sites
lkal3
lkal3
Posted
Posted

thanks for your job.I need your help to fix a serious problem

I install in my sony vaio three times but and the three times the

issue is that "glich" in the browser or if i try to move a folder or

window in the display

 

Anyone to help me?

 

 

 

Notice:

Any bug report/question must contain detailed hardware (CPU, Chipset, GPU, ATA/SATA controller, -those are the most important ones-. Include the device ID of the component), detail of the items selected at the install process, and offcourse detailed description of the issue itself. Reports/questions failing to comply with these guidelines will be most probably ignored.

 

UPDATE 7/03/2009

New ISO up. XxX_x86_10.5.6_Install_Disc_Universal_Final.v2

The main new feature is GFX EFI strings right from the installer. Besides that the new ISO is now read-only to avoid changes in the filesystem and therefore unmatched MD5. I've also added DPCIManager and XFolders to the Utilities installer's menu. With DPCIManager you can get a list of your hardware (with DEV ids); Is not much but is better than nothing. XFolders is there in case you need to replace any files on the hardisk.

I decided to make a new ISO because there were many MD5 checksums mismatches.... The new ISO integrates all fixes and PPFs and adds above mentioned features.

 

Few more details:

-Based on 10.5.6 retail disk build 9G66

-ISO Bootloader: Chameleon 1.0.11

-ISO boot kernel: Voodoo 1.0 - 9.5.0 supporting Intel and AMD CPUs. Booting optional TOH 9.2.0 kernel with -mach_kernel2 flag)

-Default install:Clean Vanilla install (Stock Apple kernel 9.6.0) build 9G66 + Chameleon 1.0.11, Appledecrypt.kext, NullCPUPowerManagement.kext, AppleSMBIOSEFI.kext, PS2Nub.kext, PS2Controller.kext (Is possible to deselect all the defauts to get a full vanilla Install)

-No language packages included

-No printer drivers included

 

Installer Screenshot:

 

post-51637-1236423139_thumb.jpg

 

If you need any language pack download the XxX_Language_Pack_V2. It includes all the language packages from the 10.5.6 retail disc:

 

post-51637-1232851362_thumb.jpg

Link to comment
Share on other sites
13Piedras
13Piedras
Posted
Posted

Just beautiful !!!

 

I'm new to OS X but this outstanding release always works like magic and installs on my system (even with my HDD on AHCI mode), no matter what I choose as long as AppleDecrypy and NullCPUPManagement are selected.

Actually on my current installment I just used those two plus X11 and the Essential System Software... and from there followed up wingrunr21's XPS M1530 installation guide to keep my system as clean and closely as possible to a real Mac... initially working with an USB mouse and keyboard (of course, since I didn't select the PS2Nub Enabler, nore the PS2Controler) and then manually added everything else as listed by that guide. :wacko:

I think you are right BlackCH, although it is really nice that an installer may provide us with a full working and configure OS X on our systems, once we realize that this is done, everybody should perform a Vanilla install for theirselves. That is a great way to learn and understand a lot of useful knowledge about this OS.

 

Certanly, this release is an extraordinary way to be induced and become involve with OS X ! Thank you so very much BlackCH !!! :D

 

Also, I want to confirm that this release has been extraordinary stable (no painful pauses, blinkin, crashes or inexplicable behavior) as primary system on a heavy daily use since 09.03.2009 (actually, I didn't have any issue with your previous release either).

 

*

Well, right now I'm trying to find out if I should also install any of the provided Chipset Support kexts for my motherboard (since OS X installs and works perfectly fine without any of them... and I'm not able to percibe any performance improvement from one or the other):

- ICHx Chipset Support...ICHx IOATAFamily.kext by Dune (up to ICH9)

- AppleAHCIPort Extended ICH Support (ICHx AppleAHCIPort.kext wirt extended support for SATA AHCI mode on ICH8/9/10 chipsets. Automatically install OrangeIcon Fix = AHCI OrangeFix.

 

Unfortunately, I did google them but haven't been able to find much information about this (any advice is most welcome). :(

*

 

A final word for all those people not been able to find this release at the green daemon or the bay of pirates... just google for "XxX_x86_10.5.6_Install_Disc_Universal_Final.v2" (with quotation marks as instructed here) and you will find your tracker (I do not have an account on neither of those sites, but I'm able to access them this way just the same). ^_^

 

Almost forget... looks like the correct name for the language pack download release its "XxX_10.5.6_Language_Packs_v2". :)

Link to comment
Share on other sites
BlackCH
BlackCH
Posted
  • Author
Posted
Well, right now I'm trying to find out if I should also install any of the provided Chipset Support kexts for my motherboard (since OS X installs and works perfectly fine without any of them... and I'm not able to percibe any performance improvement from one or the other):

- ICHx Chipset Support...ICHx IOATAFamily.kext by Dune (up to ICH9)

- AppleAHCIPort Extended ICH Support (ICHx AppleAHCIPort.kext wirt extended support for SATA AHCI

 

Im glad you found this release usefull!

Now, ICH8 (I guess is your chipset) is fully supported by OSX natively, so you dont need any extra drivers besides vanilla (stock kexts) ones.

Link to comment
Share on other sites
fastbeagle
fastbeagle
Posted
Posted

Wow this one works great. I have the bad luck of having a 8400GS graphic card with a Nforce motherboard(AMD 3800 processor). Using the option Nvinject DVI(made for the 8400/8600) my installation worked right away.I didn't have to alter anything after my install. I don't think my graphic card ever worked this well. The system doesn't seem to have any bugs at all.

Cheers :)

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...