Jump to content

iDeneb v1.3 10.5.5 Released!

Jack Layne

By Jack Layne,
in New Releases and Updates

 Share
593 posts in this topic

Recommended Posts

~David
~David
Posted
Posted
try installing without gfx card in pc i got the still waiting for root device everytime it was installed

 

 

 

be sure to install ur chipset driver to just in case thats the prob u never know:p

 

I can't remove my graphics card as I don't have integrated graphics. I wouldn't be able to do much if I can't see anything :(

 

I've tried with and without the chipset drivers. With them, I get that "mDNSresponder" error.

 

This release doesn't seem very refined...

enjourni
enjourni
Posted
Posted

Ugh. iDeneb 1.3 doesn't work with my hacked AppleHDA... I get no sound.

 

I have Sigmatel 9205 on a gateway M-6846. The AppleHDA paulo-131 provided in the "Sigmatel 9205 with iATKOS" post worked perfectly under Kalaway 10.5.4, but now i get this error at startup:

 

AppleHDA.kext failed to load: unable to locate 'layout-id' property.

 

Disk Utility goes bezzerk on AppleHDA when I repair permissions too. Mostly "should be -rw-r--r-- , they are -rwxr-xr-x" stuff. Still even after permissions repair I get the same error at startup.

dre Penn
dre Penn
Posted
Posted

Hello eveyone...I am sort of new to this forum. A system admin by trade i have no problem working out the kins. I have a system up and running and i love it. Thats hard to say being a MS person for so long.

 

My question is when these new releases come out am i able to do a simiple upgrade or do i have to start over from scratch?

BJMoose
BJMoose
Posted
Posted
Just installed on a BadAxe2 board. PATA DVD/RW onto a SATA HD. Everything but audio running out of the gates. had to run the patcher and the mic input doesn't work, but this is how it has been since tiger. The only thing that isn't 100% is in About This Mac, my overclock speed isn't showing. If that is my only gripe, then I'm a happy camper! It seems to boot and shutdown a whole lot faster than with other builds too. Everything within the OS is VERY responsive, and I haven't had any kernel panics or beach balls.

 

Congrats iDeneb, you've got a fan!!!!

Always glad to see folks that haven't given up on the BadAxe2 mb. Glad to hear everything is working fine for you. I pretty much have played around with all the BA2 boards and the different releases. I haven't finished dl'ing iDeneb version yet but should get it finished this evening or tomorrow morning. Was there anything special you had to check to make this version work?

 

BTW, if you haven't seen it yet lately, there is a complete fix for the audio. I ran this on my vanilla system and it worked perfectly. Both audio sound and mic in are now working. That was the only piece of the pie to make everything work. Here's the url to download the fix:

 

http://forum.insanelymac.com/index.php?act...st&id=36729

 

Hope this completes your system for you.

tomtom112
tomtom112
Posted
Posted

Installed iDeneb v1.3 10.5.5 three days ago.

Everything works except my gigabit ethernet and my 8800GT

 

The osx recons my card but my fps is low and sometimes i see strange lines.

 

So my first thing is to get that card working properly and then im going to fix the ethernet

 

System specs:

Asus m2n SLI

AMD athlon X2 4000+

2 GB ram @800Mhz

150GB Harddisk (sata)

MSI 8800GT OC (512MB)

G15 Keyboard (even the media buttons work)

Mx518 Mouse

Onboard audi

33import
33import
Posted
Posted

how to copy ApplePS2Controller.kext manually from DVD to HDD ?

During install my trackpad and PS/2 Keyboard working fine. On reboot after install, I have only my trackpad but no keyboard... I've a screen to plug a Keyboard and detect it. :D

 

iDeneb v1.3 10.5.5 on Lenovo Y310 notebook.

 

Sorry for my bad english :)

bazilato
bazilato
Posted
Posted
doesn´t work even with the "socalled" most compatible board Gigabyte EP-45-DS 4

 

kernel panics all over

 

back to Kalway 10.5.2

 

No working without flaws beside screensaver and Sleep :)

Don't know what's happen to you man but maybe you have to try it again ...

 

Here is my method with the same motherboard

BIOS:

SATA AHCI enabled

Power on S1

HPET enable and 64bit support

Parallel Port Disabled

Serial Port Disabled

 

-Booted from DVD

-Made a full GUID partition (no MBR)

-Then Erased in the erase section :)

-Then choosed customize before installing

and choosed: SMBIOS 800 (DDR2 800) / ICHX fix / NVINJECT / no Audio driver used (get the one for PCwizz Gigabyte Center) / No ethernet Driver used (get the one for PCwizz Gigabyte Center) / No Jmicron driver used ( if only you are using IDE get the one for PCwizz Gigabyte Center) /

 

Then install/ Then Boot and installed all needed fix (Ethernet/Audio/Shutdown that's it)

 

It worked for me ...

ShadowBandit
ShadowBandit
Posted
Posted

hi guys and gals, i am having trouble booting into the installer.... :) i got the same exact thing with kalyway 10.5.2....

 

Standard timesplicing quatum is 10000 us
Vm_page_bootstrap: 510042 free pages and 14246 wired pages
Mig_table_max_displ = 79
HTT: 1 core per package; 2 logical cpus per package
ACPI CA 20051117 [debug level=0 layer=0]
appleACPICPU: ProcessorApicId=1 LocalApicid=0 enabled
appleACPICPU: ProcessorApicId=2 LocalApicId=1 enabled
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
Calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: seatbelt policy (mb)
Loading security extension com.apple.security.TMSafetyNet
Calling mpo_policy_init for TMSafetyNet
Security plicy loaded: safety net for time machine (TMSafetyNet)
Copyright © 1982, 1986, 1991, 1993
The regents of the university of California. All rights reserved.

MAC Framework successfully initialized
Using 10485 buffer headers and 4096 cluster IO buffer headers
IOAPIC: version 0x20 Vectors 0:23
ACPI: System State [s0 s3 s4 s5] (s3)
Extension ‘com.apple.driver.applePCIconfigurator’ has immediate depndencies on both com.apple.kernel and com.apple.kpi components; use only style.
Mbinit: done
Security auditing service present
bSM auditing present
From path: “uuid”,
Waiting for boot volume with UUID 804603d3-83e9-36b8-ab8e-11501d1805d6
Waiting on <dict ID=”0”>IOProviderClass</Key><string ID=”1”>IOResources</sting><key>IOresource
Match</key><string ID=”2”>boot-uuid-media</string></dict>

 

I also get similar error when trying Boot 132 method :blink:

 

not sure what else to try.... I would greatly appreciate some help.

 

Specs:

Atom 1.6 (mmx, HT, sse2, sse3, ssse3, speedstep)

945GSE ICH7-M

GMA950 & Nvidia9300 (tried to install with GMA and i get the same thing with Nvidia)

2GB Ram 533

 

If i dont use -v it will boot into grey screen but not rotating gear....

 

 

Thanks

~)PhI~
~)PhI~
Posted
Posted
I'm stuck at localhost mDNSResponder[28]: Couldn't read user specified... etc.

I have disabled onboard LAN, Audio, Firewire, IDE etc.

 

The only reply so far in this thread was someone mentioning "Attansic NET". What

the heck is that :( there's no such thing in my BIOS.

 

 

System specs:

 

Intel Core 2 Duo E8400 (3GHz).

MSI P35 Diamond (with modded BIOS, Kalyway 10.5.2 works with both cores).

Corsair 2x1024MB DDR3 1333 MHz.

Gigabyte 9600GT Heatpipe (062210de).

Western Digital SATA 500GB

Samsung S223Q SATA DVD-RW

 

 

BIOS-settings:

 

AHCI: on

HPET: Enabled

Execute bit: Enabled

Power saving mode: S3

MPS: 1.4

 

Using Vanilla-kernel and ICHx fix.

Hey I made a breakthrough with the mDNSresponder hang. It turns out that even if I didn't select any nVidia drivers at install, it was still loading nVidia related drivers at boot and it was causing it to hang(which makes sense that it only booted into safe mode).

 

So to get around that, I did this (after booting into single/admin user mode by typing in -s at Darwin prompt): 

/sbin/fsck -fy
/sbin/mount -uw /
rm -R /System/Library/Extensions/Ge*
rm -R /System/Library/Extensions/NVD*
rm -R /System/Library/Extensions/NVinject.kext
exit

 

Once I did that, it boots fine and I can get to installing audio. Again thanks Layne for the release.

leon.kelvan
leon.kelvan
Posted
Posted

hello

 

i am using iDeneb 10.5.5 and it work very well for me , i have a hp pavilion 6880 laptop , but vga output is not working for me , when detect for it , system is crash and not working and it shoud be power off !!! :censored2:

 

please help me , and sorry for my bad english :( !!!

slipttees
slipttees
Posted
Posted

well, almost everything here is going 100%, I only have a small problem with the video, I'm using a DG35EC.

 

BIOS-settings:

JMB368 AHCI: on
HPET: Enabled
VT: Enabled
NX: Enabled
EIST: Enabled
XD: Enabled
Power saving mode: S3

 

apparently it works, after installation, when the system is just beginning on a black screen, and checked the log of the plant and saw that is climbing the kext "NVDANV40 and NVDANV50" at the same time.

 

I tried using NVinject 0.2.1 256MB and 512MB and give the same problem of black screen.

 

I'm using an XFX Nvidia 8400 GS 512MB

 

grateful

~)PhI~
~)PhI~
Posted
Posted
well, almost everything here is going 100%, I only have a small problem with the video, I'm using a DG35EC.

 

BIOS-settings:

JMB368 AHCI: on
HPET: Enabled
VT: Enabled
NX: Enabled
EIST: Enabled
XD: Enabled
Power saving mode: S3

 

apparently it works, after installation, when the system is just beginning on a black screen, and checked the log of the plant and saw that is climbing the kext "NVDANV40 and NVDANV50" at the same time.

 

I tried using NVinject 0.2.1 256MB and 512MB and give the same problem of black screen.

 

I'm using an XFX Nvidia 8400 GS 512MB

 

grateful

 

I'd remove all video drivers and then go to this thread http://forum.insanelymac.com/index.php?showtopic=132089 and use those drivers. while the main topic of the discussion is GF9 series, it should help some as the drivers posted there came from the latest macupdate I believe.

YandaPanda
YandaPanda
Posted
Posted
I can't remove my graphics card as I don't have integrated graphics. I wouldn't be able to do much if I can't see anything :censored2:

 

I've tried with and without the chipset drivers. With them, I get that "mDNSresponder" error.

 

This release doesn't seem very refined...

 

 

~David,,,,,,I had the same problem on my 1st (2nd, 3rd, 4th, etc.) install of iDeneb 10.5.5.

 

After a little digging (and a lot of reading in the forum), I tried a suggestion from another member----try clicking on the "ICHX" fix on your next install attempt.

 

When I first tried the install, I was getting the "Do not enter" sign and no matter what I tried, it would not go away and let my machine boot. Three or four install attempts later, I finally clicked on the "ICHX" fix and (wonder of wonders) was fully up and running a short time later. No panics, no crashes--it was great. I did a few kext tweaks to get wired ethernet and my P/S 2 stuff working again, but it has given me no trouble ever since.

 

Hope this helps.

tsumeone
tsumeone
Posted
Posted

Installs fine for me here, but I have yet to get it to boot up in not safe mode. I believe it has to do with my video card, Diamond ATi Radeon HD 3870x2. I get a garbled screen and it appears frozen. Safe mode works...

 

My bios settings are pretty minimal, AHCI is ON and my IDE controller, Serial port, and Parallel port are all OFF. HPET is on, Execute disable is on, Virtualization is on. I do not use any PS/2 hardware.

 

I have a GA-P35-DS3L Latest bios and Radeon HD 3870x2 video card.

 

I have checked the

ICHx fix

ALC888 fix

3870x2 fix

 

and have not selected any kernel so I can use vanilla.

 

This should work, right? Or why doesn't it?

 

If I select base radeon HD driver and not 3870x2, I can get in normal mode with sound and all, but I can't change resolution from 1024x768...

argotron
argotron
Posted
Posted

Hello,

I've downloaded and install iDeneb 1.3 and works great. I had to click the JMicron patch on installer screen but now works great. The only problem I have is that I got no sound. I have a P5B Deluxe Asus Motherboard and I've try selecting from BIOS HD and AC97 on on-board chipset for sound plus selecting the specific patch from the installer, still no sound. Do you have any ideea how I can make it work?

Thank you.

Jamie Lindemann
Jamie Lindemann
Posted
Posted
~David,,,,,,I had the same problem on my 1st (2nd, 3rd, 4th, etc.) install of iDeneb 10.5.5.

 

After a little digging (and a lot of reading in the forum), I tried a suggestion from another member----try clicking on the "ICHX" fix on your next install attempt.

 

When I first tried the install, I was getting the "Do not enter" sign and no matter what I tried, it would not go away and let my machine boot. Three or four install attempts later, I finally clicked on the "ICHX" fix and (wonder of wonders) was fully up and running a short time later. No panics, no crashes--it was great. I did a few kext tweaks to get wired ethernet and my P/S 2 stuff working again, but it has given me no trouble ever since.

 

Hope this helps.

 

 

Thanks so much for the help on this. I did what you said and it is all working great. I had the "Still waiting for root device" and now I am running the 10.5.5 without any glitches. Great work and thanks again.

 

Jamie Lindemann

E.On Lockz
E.On Lockz
Posted
Posted

hello would this release work on the following specs?

 

video: ati radeon xpress 1100

audio: realtek alc660

motherboard:EasyNote MX36 with ATI SB600 Southbridge

processor: intel core duo t2350

hdd: seagate 120 GB 2.5" (S-ATA)

dvd: NEC IDE / ATAPI dvd-rw

network: atheros ar5006eg

 

 

i tried a lot of releases but they got stuck on the: waiting for root device screen becasue of the sb600

 

an answer would be much appreciated :)

raggedjagged
raggedjagged
Posted
Posted

I've successfully installed iDeneb v1.3 on my machine, but now I'd like to install some of the drivers from the dvd, how do I access those files from the DVD in OS X? which directory do I have to open? Because i couldn't notice those files anywhere. Help!

 Share
Go to topic listing
×
×
  • Create New...