1684 replies to this topic

[Ritz Carltn]

Rampage Dev, on 04 February 2013 - 08:15 PM, said:

HDMI audio poping on 2007 iMac SMBIOS (Clover picked this SMBIOS). Mac Pro 3,1 or newer poping appears. Only on the latest version. Ideas?

On my MSI build in sig.

Ooops!  why I don't think bout that?  Big, thanks.  ^ ^

[Andy Vandijck]

I'm pleased to announce that Clover is running fine on my PATA IDE drive.
Only 40 GB on the drive but it's enough for the system.
It works damn good.
The system is a lot more stable than with Chameleon.
In my opinion it's the best bootloader there is

[Ritz Carltn]

Cool!
Andy

Andy Vandijck, on 04 February 2013 - 11:20 PM, said:

I'm pleased to announce that Clover is running fine on my PATA IDE drive.
Only 40 GB on the drive but it's enough for the system.
It works damn good.
The system is a lot more stable than with Chameleon.
In my opinion it's the best bootloader there is

[Ritz Carltn]

MacBook Pro5,1 failed.
MacBook Pro6,1 failed.
iMac9,1 failed.  
iMac12,2  failed.  
iMac13,2 failed.  
MacPro3,1 testing.  finally failed.

Rampage Dev, on 04 February 2013 - 08:15 PM, said:

HDMI audio poping on 2007 iMac SMBIOS (Clover picked this SMBIOS). Mac Pro 3,1 or newer poping appears. Only on the latest version. Ideas?

On my MSI build in sig.

Followings is NVEnabler Debug.

Feb  5 14:58:11 localhost kernel[0]: NVDANV50HAL loaded and registered.
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: init : begin
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: probe : probe
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: probe : ROM shadow enable
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: probe : patch PRAMIN
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: False ROM signature: 0x0000
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: probe : patch PROM
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: dcb table at offset 0x53f5
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: dcb numentries 16
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 0: 01000313
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 1: 08015392
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 2: 08014382
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 3: 02027362DSMOS has arrived
Feb  5 14:58:11 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Feb  5 14:58:11 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 4: 02026362
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 5: 02049300
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: numentries = 16 num_outputs = 6
Feb  5 14:58:11 localhost kernel[0]: NVEnabler: found LVDS
Feb  5 14:58:11 localhost mds[53]: (Normal) FMW: FMW 0 0
Feb  5 14:58:11 localhost WindowServer[94]: Server is starting up
Feb  5 14:58:11 localhost digest-service[97]: label: default
Feb  5 14:58:11 localhost digest-service[97]:  dbname: od:/Local/Default
Feb  5 14:58:11 localhost digest-service[97]:  mkey_file: /var/db/krb5kdc/m-key
Feb  5 14:58:11 localhost digest-service[97]:  acl_file: /var/db/krb5kdc/kadmind.acl
Feb  5 14:58:11 localhost digest-service[97]: digest-request: uid=0
Feb  5 14:58:11 localhost rpcsvchost[98]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Feb  5 14:58:11 localhost digest-service[97]: digest-request: init request
Feb  5 14:58:11 localhost digest-service[97]: digest-request: init return domain: BUILTIN server: LOCALHOST
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: Channel 1: 01
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: Channel 2: 3e
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Model found: Unknown nVidia card
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG VRAM: 1024
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @0,compatible
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @0,device_type
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @1,compatible
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @1,nameNTFS driver 3.10 [Flags: R/W].
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @1,device_type
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @0,display-cfg
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @1,display-cfg
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property @0,name
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property hda-gfx
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property device_type
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG  Setting property vbiosNTFS volume name , version 3.1.
Feb  5 14:58:12 localhost kernel[0]: NVEnabler::probe fails
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: init : begin
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: probe : probe
Feb  5 14:58:12 localhost kernel[0]: NVEnabler: probe : ROM shadow enable
Feb  5 14:58:12 localhost stackshot[44]: Timed out waiting for IOKit to finish matching.

[nateB]

jimj, on 29 January 2013 - 09:18 PM, said:

I am runnning 10.8.2 with Clover 1043 (UEFI boot) on a gigabyte GA-Z77X-UP5-TH with a GeForce GTX660...

I currently only inject FakeSMC and the Intel Ethernet driver

There are two issues I would like advice on:

1) Audio support. What is the "best" mechanism to enable the alc898 sound chip? My goal is to be as "vanilla" as possible, and to only install kexts in the EFI/kexts/10.8 directory or patch within Clover... I currently have audio working using HDAenabler1 and a patched AppleHDA, however they must be placed in S/L/E. Is there an alternate method to either enable these to go in EFI/kexts/10.8 or simply patch using Clover???

2) Whenever I try to wake from sleep (power button or pressing a key), the system instantly reboots. I see conflicting information that this is either a USB dsdt issue or a Clover bug... is there a fix/workaround for this?

Thanks,
-Jim

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?

[antone]

nateB, on 05 February 2013 - 05:31 AM, said:

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?

I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours.  I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction.  He's making it work via a MacBook pro, but is trying to get a more reasonable setup.  

The problem I'm running into, is I haven't built a hackintosh in about five years.  And I can only find one guide that has no discussion surrounding it.  Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.  

If you have any links that could point me in the right right direction, I'd be grateful.  Thanks!

[Andy Vandijck]

@dmazar: my pre boot.log with BIOS BlockIO boot7 and my dmesg from OS X ;-)

Attached Files

•  dmesg.txt.zip   2.12K   2 downloads
•  preboot.log.zip   3.34K   3 downloads

[Ritz Carltn]

Hi Andy and Slice,
I'd like to have you, two advice.
I have HP EliteBook 8540p with Clover.
It generally reboot before start windows, but, sometimes boot successfully.
there is no difference booting Log and reboot log.
I guess root cause is NVS 5100m and HDMI Audio.
I think about Andy's DeviceMergeNub.kext driver for this issue.
How about your opinion?
Or I think Slice already know this issue, right?  ^ ^

I almost done except VGA, NVS5100M & HDMI Audio.
- lspci_list
http://pastebin.com/dJVRTZJK
Followings is boot.log & system.log.
- http://pastebin.com/7MTyyjdZ-  
http://pastebin.com/L78FuwUB
IORegistry Explorer
http://www.mediafire...pduw9jnbklc8dsb

Andy Vandijck, on 05 February 2013 - 07:10 PM, said:

@dmazar: my pre boot.log with BIOS BlockIO boot7 and my dmesg from OS X ;-)

Attached Files

•  nvidia-02.png   281.45K   24 downloads

[claver]

Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!

[jimj]

nateB, on 05 February 2013 - 05:31 AM, said:

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?

I am not using USB injection.

Since originally positing i figured out I do not need HDAenabler1

I can upload my config.plist tonight.

-Jimj

antone, on 05 February 2013 - 08:31 AM, said:

I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours.  I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction.  He's making it work via a MacBook pro, but is trying to get a more reasonable setup.  

The problem I'm running into, is I haven't built a hackintosh in about five years.  And I can only find one guide that has no discussion surrounding it.  Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.  

If you have any links that could point me in the right right direction, I'd be grateful.  Thanks!

I will be writing up the  build of this machine once I am done tuning it...

At this point I only have one minor cosmetic issue to address and one functional issue. The cosmetic issue is due to a PCI card I am using that does not affect most people...

The ONLY functional issue at this time is that waking from sleep causes a reboot, and this is apparently a known issue for UEFI booting 10.8.2 according to slice...

This board is very easy to bring up. The only kexts needed are FakeSMC, AppleIntele1000e, and AppleHDA.

The only problem encountered using vanilla install with clover had to do with my choice of video card, which is not supported by 10.8.2. This required me to remove the Nvidea drivers from the BaseSystem image of InstallESD to get vanilla install to work. If you want to use #####/##### install it will just work.

-Jimj

[alexanderq]

claver, on 06 February 2013 - 03:00 PM, said:

Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!

Clover does automatic model injection based on your hardware but if you want to change somethingl

How port from Chameleon Smbios.plist to Clover config.plist

From smbios.plist (Chameleon)

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>08/03/10</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MP31.88Z.006C.B05.0903051113</string>
<key>SMboardproduct</key>
<string>Mac-F2268DC8</string>
<key>SMfamily</key>
<string>MacPro</string>
<key>SMmanufacturer</key>
<string>Apple Inc.</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMserial</key>
<string>ElEvEnChArS</string>
<key>SMsystemversion</key>
<string>1.3</string>
</dict>
</plist>
to confing.plist (Clover)

....
<key>SMBIOS</key>
<dict>
<key>BiosVendor</key>
<string>Apple Inc.</string>
<key>BiosVersion</key>
<string>MP31.88Z.006C.B05.0802291410</string>
<key>BiosReleaseDate</key>
<string>08/03/10</string>
<key>Manufacturer</key>
<string>Apple Inc.</string>
<key>ProductName</key>
<string>MacPro3,1</string>
<key>Version</key>
<string>1.3</string>
<key>Family</key>
<string>MacPro</string>
<key>SerialNumber</key>
<string>ElEvEnChArS</string>
<key>SmUUID</key>
<string>00000000-0000-X000-X000-XXXXXXXXXXXX</string>
<key>BoardManufacturer</key>
<string>Apple Inc.</string>
<key>BoardSerialNumber</key>
<string>C02032101R5DC771H</string>
<key>Board-ID</key>
<string>Mac-F42C88C8</string>
</dict>
....
and for the volumes hiding put this in config.plist and boot.log can be generated in clover menu by presing F2


<key>HideVolumes</key>
<dict>
<key>0</key>
<dict>
<key>VolumeString</key>
<string>String or it's part from boot.log</string>
</dict>

[carbo178]

claver, on 06 February 2013 - 03:00 PM, said:

Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!

For SMBIOS just add this string:


<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>MacPro3,1</string>
</dict>

Replace MacPro3,1 with your.

Ciao

[jimj]

nateB, on 05 February 2013 - 05:31 AM, said:

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?

Here is my config.plist...
-JimJ


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SystemParameters</key>
<dict>
<key>boot-args</key>
<string>slide=0</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>
</dict>
<key>Pointer</key>
<dict>
<key>Speed</key>
<string>8</string>
</dict>
<key>Graphics</key>
<dict>
<key>GraphicsInjector</key>
<string>No</string>
<key>PatchVBiosBytes</key>
<dict>
<key>Find</key>
<data>gAeoAqAF</data>
<key>Replace</key>
<data>gAeoAjgE</data>
</dict>
</dict>
<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>iMac12,2</string>
</dict>
<key>PCI</key>
<dict>
<key>HDAInjection</key>
<string>0x1</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<dict>
<key>0</key>
<dict>
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Find</key>
<data>QVBQTEUgU1NEAA==</data>
<key>Replace</key>
<data>AAAAAAAAAAAAAA==</data>
</dict>
<key>1</key>
<dict>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Find</key>
<data>RXh0ZXJuYWw=</data>
<key>Replace</key>
<data>SW50ZXJuYWw=</data>
</dict>
</dict>
</dict>
</dict>
</plist>

antone, on 05 February 2013 - 08:31 AM, said:

I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours.  I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction.  He's making it work via a MacBook pro, but is trying to get a more reasonable setup.  

The problem I'm running into, is I haven't built a hackintosh in about five years.  And I can only find one guide that has no discussion surrounding it.  Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.  

If you have any links that could point me in the right right direction, I'd be grateful.  Thanks!

UPDATE:

I tried an Apple Thunderbolt to Gigabit Ethernet dongle - worked flawlessly.

-JimJ

[q64ceo]

jimj, on 07 February 2013 - 03:32 AM, said:

Here is my config.plist...
-JimJ


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SystemParameters</key>
<dict>
<key>boot-args</key>
<string>slide=0</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>
</dict>
<key>Pointer</key>
<dict>
<key>Speed</key>
<string>8</string>
</dict>
<key>Graphics</key>
<dict>
<key>GraphicsInjector</key>
<string>No</string>
<key>PatchVBiosBytes</key>
<dict>
<key>Find</key>
<data>gAeoAqAF</data>
<key>Replace</key>
<data>gAeoAjgE</data>
</dict>
</dict>
<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>iMac12,2</string>
</dict>
<key>PCI</key>
<dict>
<key>HDAInjection</key>
<string>0x1</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<dict>
<key>0</key>
<dict>
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Find</key>
<data>QVBQTEUgU1NEAA==</data>
<key>Replace</key>
<data>AAAAAAAAAAAAAA==</data>
</dict>
<key>1</key>
<dict>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Find</key>
<data>RXh0ZXJuYWw=</data>
<key>Replace</key>
<data>SW50ZXJuYWw=</data>
</dict>
</dict>
</dict>
</dict>
</plist>

iMac12,2 could be the problem of why your computer crashes after sleep.

[jimj]

q64ceo, on 08 February 2013 - 10:48 PM, said:

iMac12,2 could be the problem of why your computer crashes after sleep.

What would you suggest?

[q64ceo]

jimj, on 08 February 2013 - 11:42 PM, said:

What would you suggest?

Try changing it back to the preferred MacPro3,1

[tical2k]

I have an odd problem I was hoping to get answered.  If I enable CSM on my Asus G75VW (has Asus GeForce GTX 670m) I can boot fine, but sleep does not work.  If I boot with CSM off and pure UEFI boot, I get instant reboot.  I've traced this to the graphics kexts.  If I move the NV* kexts out of the way, it boots fine in pure UEFI.  Sleep appears to work, but the screen does not turn off.  (The mouse becomes unresponsive until I press the power button).  When I boot with the kexts and CSM, I see "cannot shadow vbios."  Has anyone seen this before?  It'd appear the graphics injector isn't working correctly or I have some bad settings.  Any help would be appreciated! (oh this is ML 10.8.2)

[theconnactic]

Back in the Clover boat!

Installation, as before, was seamless and to use and tweak the config.plist, very intuitive. For the first time i have it on my HDD (in fact, booting from it on two of my hacks) and i spent just over an hour to get all the functionalities i had with Chameleon.

A question: how do i fix both the Clover boot screen and Apple boot screen resolutions? I'd love to get rid of that stretched, ugly resolution i'm having...

Best regards!

[mani_bond007]

Clover is not detecting Windows 7 .
EFI partition is disk0s1
Windows is disk0s2
OS X is disk0s3
Only OSX is detected.
HOw can i get clover to detect Windows 7.
DO i need to add some files drivers64UEFI?
I can see Windows partition [NTFS] when i boot into OSX but clover cannot detect windows 7.
Any ideas why?
UX31A OS X ML 10.8.2

[magnifico]

mani_bond007, on 11 February 2013 - 05:38 AM, said:

Clover is not detecting Windows 7 .
EFI partition is disk0s1
Windows is disk0s2
OS X is disk0s3
Only OSX is detected.
HOw can i get clover to detect Windows 7.
DO i need to add some files drivers64UEFI?
I can see Windows partition [NTFS] when i boot into OSX but clover cannot detect windows 7.
Any ideas why?
UX31A OS X ML 10.8.2

Your mainboard?