856 replies to this topic

[mm67]

mozodojo, on 04 February 2012 - 12:18 PM, said:

I added your chipset profile into plugin. Check the repository.

Now Cpu heatsink is showing value that is labeled as System in Windows programs, Motherboard is showing that disconnected sensor and real Cpu heatsink is missing. I had Prime95 running in background and I know that real Vcore value on full load is 1.380 V, correct Dimm voltage is probably 1.64 V, it is set to 1.65 V in bios. I have a feeling that now only temperatures of first two cores are shown two times, third core on my cpu always runs warmer than others. Fan speed reading and Radeon temperature seem to be correct.

 Screen Shot 2012-02-04 at 15.28.53.png   46.74K   134 downloads

Here is same situation with old FakeSMC:

 Screen Shot 2012-02-04 at 15.57.16.png   42.16K   120 downloads

Voltages are wrong here also but temperatures are correct because I rearranged names in IT87x.kext
 Info.plist.zip   1.16K   21 downloads

[archintosh]

Hi Mozodojo,
I installed IntelThermal and ACPISensors. On Lenovo G470 i5-2410M here I got:
 Screen-Shot-2012-02-04-at-8.23.png   74.71K   110 downloads
Did I install wrong plug-ins?

Thanx..

[kozlek]

mm67, on 04 February 2012 - 01:35 PM, said:

Now Cpu heatsink is showing value that is labeled as System in Windows programs, Motherboard is showing that disconnected sensor and real Cpu heatsink is missing. I had Prime95 running in background and I know that real Vcore value on full load is 1.380 V, correct Dimm voltage is probably 1.64 V, it is set to 1.65 V in bios. I have a feeling that now only temperatures of first two cores are shown two times, third core on my cpu always runs warmer than others. Fan speed reading and Radeon temperature seem to be correct.

Screen Shot 2012-02-04 at 15.28.53.png

Here is same situation with old FakeSMC:

Screen Shot 2012-02-04 at 15.57.16.png

Voltages are wrong here also but temperatures are correct because I rearranged names in IT87x.kext
Info.plist.zip

DIMM voltage is really could be something else. Could you run OpenHardwareMonitor in Windows and get a screenshot?

[westwaerts]

Would be extra nice, mozodojo, if you add,
that your version is not compatible with slice´s project on projectosx ( intelcpumonitor !!!)
it totally bombed my system and as fakesmc is urgently needed to start, its a mess to repair.

and i like to install it on /extra, what your installer doesnt allow.

[mm67]

mozodojo, on 04 February 2012 - 03:16 PM, said:

DIMM voltage is really could be something else. Could you run OpenHardwareMonitor in Windows and get a screenshot?

I see now what is happening, you are using channels 1 & 2 as Vcore and Dimm voltage, but they are actually on channels 6 & 7.
 ohm.PNG   100.4K   157 downloads

[kozlek]

archintosh, on 04 February 2012 - 01:37 PM, said:

Hi Mozodojo,
I installed IntelThermal and ACPISensors. On Lenovo G470 i5-2410M here I got:
Screen-Shot-2012-02-04-at-8.23.png
Did I install wrong plug-ins?

Thanx..

ACPISensors only for advanced users and programmers. Check topics on projectosx.com.

[sacaman1]

hello mozodojo

i get this in log



10:48 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb  4 19:10:48 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb  4 19:10:48 imac kernel[0]: RadeonMonitor: found 6759 Radeon chip
Feb  4 19:10:48 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb  4 19:10:48 imac kernel[0]: RadeonMonitor: Unknown DeviceID!


how i can solve this issue

[VCH888]

Thanks mozodojo.

my screenshot: Z68XP-UD3R & 2500K

 Z68XP-UD3R.JPG   110.38K   119 downloads

[kozlek]

VCH888, on 04 February 2012 - 04:22 PM, said:

Thanks mozodojo. my screenshot: Z68XP-UD3R & 2500K Z68XP-UD3R.JPG

So TMPIN0 is System and TMPIN2 is Processor for IT8728F. Will fix it later.

[hockey9999]

Would either of these files be helpful for me to enable better monitoring support?
This is using the regular build of FakeSMC. I wasnt getting voltage reading using this one, but did get CPU multipier.

 hwmpro_smbus.txt   8.97K   13 downloads
 HWMonitorPro.txt   31.78K   21 downloads

Thanks!

Attached Files

•  Fullscreen.jpg   53.2K   151 downloads

[mitch_de]

Wreid: I lost speedstepping using that FAKESMC + IntelThermal plugin. Always multi 10. I cheked with MSRDumper but same.
Then i guess it was by new AppleIntelCPU.kext 10.7.3 and reinstalled that kext from 10.7.2 . NO help.
Then i installed "old"/ other FakeSMC 3.1.0 without Intelthermal (but IntelCPUMonitor) and now stepping worked again. Also MSRDumper shows now multi 6...10, depend  on cpu loads.
Perhaps other can check if multi stays fixed (highest multi)  with that new set of FakeSMC + IntelThermal ?

[Slice]

sacaman1, on 04 February 2012 - 04:21 PM, said:

hello mozodojo

i get this in log



10:48 imac kernel[0]: F718x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb  4 19:10:48 imac kernel[0]: W836x: [Warning] found unsupported chip ID=0x10 REVISION=0x7
Feb  4 19:10:48 imac kernel[0]: RadeonMonitor: found 6759 Radeon chip
Feb  4 19:10:48 imac kernel[0]: IT87x: [Warning] invalid super I/O chip ID=0xffff
Feb  4 19:10:48 imac kernel[0]: RadeonMonitor: Unknown DeviceID!


how i can solve this issue

No problem.
New Radeon.kext rev509 at project.

Mozo, we should synchronize the projects.

[npwski]

Mozo, thank you. Now my Winbond detected correctly:
Kernel.log:  W836x: found Winbond W83667HG-B

All looks fine except number of fans:
 Shot 2012-02-05 в 12.07.41.png   39.79K   39 downloads

How I can increase number of fans to 4? Now I changed value "FANINLIMIT" to 4, but no success.

Спасибо ).

[westwaerts]

@Slice

i am totally with you, PLEASE SYNCHRONIZE YOUR PROJECTS.

@mozodojo
we all want to use monitoring, we all rely on values posted,
but dealing such a sensitive case with various versions, compatible and incompatible ones, older, newer,
makes it difficult.

and even god made a mistake with inventing humans.

[mlstudio]

Not working for me.
No CPU multipier, no fan speed, no GPU...
Anyway, Thanks Mozodojo !

[Mohamed Khairy]

thanks Mozodojo

my notebook is dell inspiron n5110

here is kernel log

Feb  5 17:39:29 localhost kernel[0]: PC8739x: NSC: Found supported chip ID=0xfc REVISION=0x1b
Feb  5 17:39:29 localhost kernel[0]: PC8739x: slice (C) 2011
Feb  5 17:39:29 localhost kernel[0]: FakeSMC: opensource SMC device emulator by netkas (C) 2009
Feb  5 17:39:29 localhost kernel[0]: FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
Feb  5 17:39:29 localhost kernel[0]: FakeSMCDevice: 17 preconfigured key(s) added
Feb  5 17:39:29 localhost kernel[0]: FakeSMCDevice: successfully initialized
Feb  5 17:39:29 localhost kernel[0]: PXSX cannot assert wake from D3cold
Feb  5 17:39:29 localhost kernel[0]: NVClockX: [Warning] no nVidia graphics adapters found
Feb  5 17:39:29 localhost kernel[0]: NVClockX: [Warning] 0>/y������a
Feb  5 17:39:29 localhost kernel[0]: PC8739x: found NSC PC8739xx, revision 0x1b
Feb  5 17:39:29 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x2a, stepping 0x7, cores 2, threads 4, TJmax 100
Feb  5 17:39:29 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Card: 0, Vendor ID: 10de, Device ID: df5, Architecture: 1000000, GF100 [GeForce GT 525M]
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize xHC addressing capability 64 bit register
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize HCSParams2 = 0x11
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize MAX SCRATCH PAD = 0
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Error reading BIOS
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Adding temperature sensors
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Adding frequency sensor
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Overclocking...

and here is the result

 1.png   30.69K   11 downloads

fan wrong & fixed

no multipler no volt no chipset temp

[THe KiNG]

dgsga, on 04 February 2012 - 12:34 PM, said:

Hi mozo
Most new Asus boards have Nuvoton IO chips, owned by Winbond. Do you have any plans to add support for these? Data sheets are on the net, the open source Hw monitor code does contain support for them. I'd be happy to help with testing, thanks for all your work so far

mozodojo, on 04 February 2012 - 01:16 PM, said:

Why not? Will add it later.

Hi,

I already did it but forgot to release it
In attached zip you will find all the stuff I made.
Also for those who like to play with ACPI http://www.projectos...indpost&p=16787

Enjoy!
 NCT677x.zip   10.58K   47 downloads

[kozlek]

THe KiNG, on 05 February 2012 - 10:04 PM, said:

Hi, I already did it but forgot to release it In attached zip you will find all the stuff I made. Also for those who like to play with ACPI http://www.projectos...indpost&p=16787 Enjoy! NCT677x.zip

Cool stuff!

I also implemented it yesterday, but not tested. I'll merge our plugins, you have things I want to add to another plugins - like more voltage keys..

[sacaman1]

Slice, on 05 February 2012 - 06:14 AM, said:

No problem. New Radeon.kext rev509 at project. Mozo, we should synchronize the projects.

Thanks Slice but  i don't get any value on the Istate program

[kozlek]

Slice, on 05 February 2012 - 06:14 AM, said:

No problem.
New Radeon.kext rev509 at project.

Mozo, we should synchronize the projects.

Hi, slice!

Yes, but only on GitHub. it has cool mac app... I don't want to get back to SVN.

Mohamed Khairy, on 05 February 2012 - 03:54 PM, said:

thanks Mozodojo

my notebook is dell inspiron n5110

here is kernel log

Feb  5 17:39:29 localhost kernel[0]: PC8739x: NSC: Found supported chip ID=0xfc REVISION=0x1b
Feb  5 17:39:29 localhost kernel[0]: PC8739x: slice (C) 2011
Feb  5 17:39:29 localhost kernel[0]: FakeSMC: opensource SMC device emulator by netkas (C) 2009
Feb  5 17:39:29 localhost kernel[0]: FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
Feb  5 17:39:29 localhost kernel[0]: FakeSMCDevice: 17 preconfigured key(s) added
Feb  5 17:39:29 localhost kernel[0]: FakeSMCDevice: successfully initialized
Feb  5 17:39:29 localhost kernel[0]: PXSX cannot assert wake from D3cold
Feb  5 17:39:29 localhost kernel[0]: NVClockX: [Warning] no nVidia graphics adapters found
Feb  5 17:39:29 localhost kernel[0]: NVClockX: [Warning] 0>/y������a
Feb  5 17:39:29 localhost kernel[0]: PC8739x: found NSC PC8739xx, revision 0x1b
Feb  5 17:39:29 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x2a, stepping 0x7, cores 2, threads 4, TJmax 100
Feb  5 17:39:29 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Card: 0, Vendor ID: 10de, Device ID: df5, Architecture: 1000000, GF100 [GeForce GT 525M]
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize xHC addressing capability 64 bit register
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize HCSParams2 = 0x11
Feb  5 17:39:29 localhost kernel[0]: PXHCD	0xffffff807ee85000:UIMInitialize MAX SCRATCH PAD = 0
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Error reading BIOS
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Adding temperature sensors
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Adding frequency sensor
Feb  5 17:39:29 localhost kernel[0]: NVClockX: Overclocking...

and here is the result

1.png

fan wrong & fixed

no multipler no volt no chipset temp

No multiplier, what the CPU you have?

This plugin is totally made by slice, I really don't know how to fix it.