auqs10 Posted January 7, 2008 Share Posted January 7, 2008 Hi sonarMTL, first I have to report two systems working on with the Kalyway 10.5.1 Install DVD. I have added the parts in the signature but I will describe in detail for each of them. 1 Notebook Dell 6400/E1505 - GeekBench score ~1900 , XBench score ~110 - Leopard Kalyway 10.5.1 with "vanilla" kernel working fine - CPU T7200 Intel Core 2 Duo at 2 GHz (installation and working fine with only one core BIOS enabled) - 2x1 Gb DDR2 PC5300 (667 MHz) - working fine - GMA 945Mobile (GMA950 graphic card) - QE and CI working fine under different resolutions (no patching needed, active directly in the system installation) - HDD Toshiba 120 GHz (with the map as follows first/primary partition WinVista 32 NTFS 512 bit/sector, second/primary partition Leopard 10.5.1 EFI-MBR HFS+ Extended Journaled, other three extended/logical partitions NTFS 512 bit/sector) - DVD-RW Philips - working fine - Firewire 400 working fine under OSX (perfect connection to an iMac 17") - Sound Sigmatel 9200 patched with Taruga's 1.20 patch and linux codec dump http://psykopat.free.fr/apple/AppleHDA/sig...igmatel9200.txt - working fine as normal output (louder up and quiet down buttons working only), BUT NO MIC - 3 in 1 card reader working fine - all USB active with very good speed - NO LID REACTIVATION AFTER CLOSING - Intel Wireless 3945a/b/g NOT WORKING (the PCI-e minicard can be replaced with Dell ones 1390 or even 1500 Draft N - for only max. 50$) 2 PC System - build up from components GeekBench score ~3100, XBench score ~160 - Leopard Kalyway 10.5.1 working with patched kernel ("vanilla" gives short restart before loading) - ASUS P5LD2 motherboard (BIOS updated to 1903) - CPU E6300 Intel Core 2 Duo 1.86 GHz (overclocked to 2.33 GHz) - working fine with both cores active - 4x1 GB DDR2 PC5300 (667 MHz) - no overclocking - working with 3.2 GB for System and BIOS at POST reports the rest of 800MB "Appropriated" - motherboard limited capability - Sapphire ATI X1300Pro 256 MB, working with DiaboliK patch (error on installation but after restarting the system everything works fine with QE and CI and different resolutions and frequencies), VGA working fine BUT NO DVI - monitor ASUS MB19TU at 1280x1024x32@75 on VGA - Western Digital 250 GB Sata2, EFI-GUID partitioned from Kalyway DVD, reserved only for OSX, system installed on second/primary partition (except first/primary EFI partition, the rest of them have a 128 MB unallocated space appeared after partitioning in OSX with diskutil DO NOT MESS WITH THEM - Seagate Quantum 160 GB Sata2, MBR partitioned reserved only for WinVista32, system installed on first/primary NTFS partition, second/primary NTFS partition and the rest of three NTFS extended/logigal partitions (all of them writable fromLeo with MacFuse and NTFS-3G driver) - Western Digital 40 GB IDE 100, EFI-GUID partitioned from Kalyway DVD, reserved for Leo's TimeMachine - DVD-RW ASUS 1608S, working just fine - LAN on-board working fine without patching - sound ALC882 on-board working with Taruga's 1.20 patch and the linux codec dump http://psykopat.free.fr/apple/AppleHDA/realtek/882.txt - working fine even the front connectors for out and mic (not tested the SPDIF output) - all USB active with very good speed I will give it a try to format the WD250 as EFI-MBR for Leo to see if "vanilla" kernel will work. Link to comment Share on other sites More sharing options...
vlzhukov Posted January 7, 2008 Share Posted January 7, 2008 Current OS X Version: 10.5.1 Install method: Zephyroth`s DVD Leopard10.5.1_AMD_SSE2/SSE3 (32bit) over Tiger10.4.10 Desktop-Yes Motherboard Manufacturer:Gigabite Model:GA-K8N51GMF-9 Bios Version: Award BIOS F7 Chipset: GF6100/nF430 Audio: HDA ALC880 working with Taruga's beta4some861_880Installer (stereo output, mic & line input) LAN: Gigabite LAN with VITESSE 8201 - not working CPU Model Number: Athlon64 X2 4600+ Recognised as: AMD Athlon 64 X2 Dual Core Processor 4600+, 2.41GHz Memory/DDR: 2Gb Kingston DDR PC-3200 400MHz Video Manufacturer: XFX Model: NVIDIA GeForce 8600GT Bus Type: PCIe x16 Memory size: 256 Mb Dual screen - not tested QE/CI working - Yes! Resolution changeable - Yes! Required patches - NVinject 0.2.1 + GLFramework & GeForce kexts from 10.5.2Upd FireWire-working 400Mbit/sec SATA/IDE - working Wifi- not tested (DLink Access Point DWL-2000AP+) LAN PCI Card Realtek RTL8139 - working out box USB Bluetooth Dongle NEODRIVE BTA-6030 - working out box USB Veb-camera A-4 Tech PK-7MA(+microphone) - working with macam.component USB Scanner Mustek BearPaw 2448CU Pro - working USB Cardreader working with SD & microSD Memory Card USB printer HP DeckJet 840C working with Apple driver`s Link to comment Share on other sites More sharing options...
Zitro Posted January 7, 2008 Share Posted January 7, 2008 Hardware Overview: Model Name: Mac Model Identifier: Mac Pro Processor Speed: 2.39 GHz Number Of Processors: 1 Total Number Of Cores: 4 L2 Cache: 8 MB Memory: 2 GB Bus Speed: 4.27 GHz Boot ROM Version: Hack.int.0sh Serial Number: YM8659M6W0A System Software Overview: System Version: Mac OS X 10.5.1 (9B18) Kernel Version: Darwin 9.1.0 Boot Volume: Macintosh Boot Mode: Normal GeForce 7900 GS: Chipset Model: GeForce 7900 GS Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0292 Revision ID: 0x00a1 ROM Revision: NVinject 0.1.3 Displays: Display: Resolution: 1024 x 768 @ 85 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected Intel Desktop Board DG31PR with Last Bios Update 0037. Intel® Core™2 Quad Processor in Leopard recognized as 2.4Ghz Unknown 2Gb DDR2 Markvision to 667Mhz 1 SATA Hard Drive 80Gb 1 SATA Hard Drive 250Gb Sony/NEC Optiarc DVD RW AD-7190A PATA with Serial-ATA Adapter, work fine. Intel® High Definition Audio work with patch ALC888Audio, work (IN/OUT), not work front panel audio. Lan: work fine, not need patch. Not testing Intel® Graphics Media Accelerator 3100 (X3100) PCI-Express e-VGA e-GeForge 7900GS KO all resolutions is OK, 2 DVI port work. patch with Leo-only_NVinject_0.1.3 All USB port work. All SATA work. Install method: first Leopard 10.5 ToH with EFI V.8 and Vanilla Kernel, later upgraded to 10.5.1 through Apple Software Update Link to comment Share on other sites More sharing options...
Erik-O Posted January 8, 2008 Share Posted January 8, 2008 I poosted the ASUS A8N5X that was added to the OSx86 Project list... but the edits are misaligned! i.e. a column is missing. The info looks correct, but two columns were combined... just wanted to point that out! I'm still working on the LAN issue and will post when a solid resolution is found. Link to comment Share on other sites More sharing options...
jeanzeiss Posted January 8, 2008 Share Posted January 8, 2008 Install method: KALYWAY 10.5.1 EFI MBR boot dual boot with bios funktion XP on 1 SATA Mac on 2 SATA Desktop/Laptop: Desktop Motherboard: Asus P5KC Version:?? Bios Version: 0804 Chipset: P35 Audio: working? patches? ALC 883 doesn't work i have tried almost all patch, sadly it doesn't work LAN: working? patches? 8139 work but the onboard doesn't work CPU Model Number: Core 2 Duo E6550 Recognised as: 3G Memory/DDR: 4x1G ADATA DDR2 800 but in mac works only 667MHz Video Manufacturer: ATI Model: HD 2600XT Bus Type: PCIe x16 Memory size:256 DDR3 Dual screen working? yes Resolution: 1280x1024 @ 60 Hz and 1680x1050 @ 60 Hz Depth: 32-bit Color QE/CI working? yes Resolution changeable? yes Required patches or bios flashing? patch only intall then with -x reboot copy the follow 2 kext chown and chmod reboot all works good 2600xt.zip SATA/IDE working:yes 500G Samsung SATA and 250G Maxtor SATA other peripherals/pci addon cards? Creative Soundblaster Audigy not work misc hardware: Link to comment Share on other sites More sharing options...
pablovbas Posted January 8, 2008 Share Posted January 8, 2008 Install method: Kalyway 10.5.1 Efi guid Desktop/Laptop: Desktop Motherboard: Intel DG31 PR Manufacturer: Intel Chipset: Intel g31 Express Audio: Realtek alc 888 working LAN: not tested CPU Model Number: pentium D 820 2.8ghz Recognised as: 2.8 ghz unknown processor Memory/DDR: 1X1gb ddr2 667 mhz Video Manufacturer: Intel Model: GMA 3100 Bus Type: onboard Memory size: 64mb Dual screen working: no QE/CI working: no Resolution changeable: no (only 1024x768) SATA/IDE working: 80GB IDE Samsung working misc hardware: graphic tablet genius 8x6 USB working pabs :devil: Link to comment Share on other sites More sharing options...
SA22C Posted January 8, 2008 Share Posted January 8, 2008 Current OS X Version: 10.5.1 Install method: BrazilMac method + EFI 8.0 GUID Desktop Prebuilt: No Manufacturer: Me. Model: iHack Motherboard: GA-965P-DS3 Manufacturer: Gigabyte Version: Rev 1.0 Bios Version: F12 Chipset: Intel 965P Audio: ALC883 Working with the 10.4.8 ALC88x patch LAN: Marvel Yukon, works out of the box. Required patches: In order to get JMicron, IDE and ICH8 working, I've added the requisite device id's to System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/AppleIntelPIIXATA.kext/Contents/Info.plist as detailed here: http://forum.insanelymac.com/index.php?sho...n%20Beach And installed JMicronATA.kext located here: http://forum.insanelymac.com/index.php?sho...;p=457394 I'm also using a modified AppleSMBIOS.kext bundled with the EFI bootloader, the IONetworking fix for TimeMachine and the fixed ACPIPlatform for reboot/shutdown. Reboot fix is located here: http://forum.insanelymac.com/index.php?sho...;p=531393 Note that using both the ICH8 and the JMicron controller will cause bootup to be delayed by 30-45 seconds due to a contention issue. I haven't been able to resolve it unless I disable IDE support. No other errors are caused by using IDE and the system is stable and disk speeds are good while in Leopard. This method requires both the ICH8 and the JMicron controllers to be set to IDE mode in the BIOS CPU Model Number: Core 2 Duo P6400 Recognised as: 2.13 GHz Memory/DDR: 2 GB OCZ PC6400 800 MHz Video Manufacturer: BFGTech Model: 8800 GT OC Bus Type: PCIe x16 Memory size: 512 MB Dual screen working? Yes QE/CI working? Yes Resolution changeable? Yes Required patches or bios flashing? Using 10.5.2 kexts and OGL framework + NVInject SATA/IDE working: Yes. See above for required patches Wifi & patches? Not applicable. other peripherals/pci addon cards? None misc hardware: Logitech Wave keyboard and MX1000 mouse working natively with the Logitech software. The end result is that everything works quite smoothly with the vanilla kernel, allowing sleep, reboots, full Time Machine functionality and a blazing fast system. Link to comment Share on other sites More sharing options...
lithium06 Posted January 8, 2008 Share Posted January 8, 2008 Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1 DVD Desktop Custom built Motherboard Manufacturer: Gigabyte Model: P35-DS3L Version: 2.0 Bios Version: F7 Chipset: P35 Audio: ALC888 needs patched LAN: Not tested onboard CPU Model Number: Core 2 Duo E4400 Recognised as: 2.0GHz Memory/DDR: Crucial Ballistix 4x1Gig DDR2 - 800 Video Manufacturer: EVGA Model: 7950GT Bus Type: PCIe x16 Memory size: 256MB QE/CI working: Both Resolution changeable: Yes Required patches or bios flashing: Natit DevID edit SATA/IDE working: SATA yes (haven't tried IDE) other peripherals/pci addon cards: Netgear GA311 Network card - works w/o patching Link to comment Share on other sites More sharing options...
Lozzo Posted January 8, 2008 Share Posted January 8, 2008 Current OSX : 10.5.1 Install method : Kalyway DVD, MBR/EFI assumed working/Vanilla Motherboard Manufacturer : Asrock Model : ConRoe 1333-667 Version : R1 BIOS Vers : 1.20 Chipset : Intel 945G Audio : ALC 888, not working as yet. *edit* Output working via AzaliaAudio.pkg patch LAN : On-board Realtek RTL 8139, working, no patches needed. CPU Model : Intel E2160 (BSEL Modded and Oc'ed to 2.7Ghz) Recognised as : 3Ghz ? Memory 1Gb total. (2x512Mb DDR2/667 generic) Video Manufacturer : Jetway Model : Nvidia 8600GT Bus : PCI-E Memory : 256Mb Dual Screen? Not tried QE/CI? : Yes Resolution changable? : Yes, but "blue screens" after change. Changed resolution is applied/saved after reboot. Currently at my monitors native resolution of 1280x1024x75Hz Required patches : JohnnieCarcinogens *excellent* OpenGL/10.5.2kext/NVinject installer package. SATA/IDE? Not tested SATA, all happy on IDE. Installed upon 60Gb Maxtor IDE set as Master, installed via Lite-ON LH201A IDE optical drive set as Slave. WiFi? Not yet. Attempting to persuade a Zydas ZD1211B to work, which previously worked on Tiger 10.4.3 *edit* Now working, sort of. Posting this via 10.5.1 ZyDas updated driver vers ZD112_MACUSB4_7_9. ZD Config utility shows up, USB wifi stick is detected but no networks detected. Fudge around.. Once en1 network device is setup in Prefs/Networks, change Configure from DHCP to Manual. Apply, go back to ZD Config util, networks now found, util works as usual. Re-enable DHCP (if required) and off you go. If you change anything it networks that stops the ZD config util from scanning for networks, disconnect and reconnect the USB adaptor. *edit2* Occasionally freezes up when scanning for networks if booted up from cold with USB adapter in situ. Remove/reconnect and all is happy. *edit 3* Now using BT Voyager 1040 PCI wireless adapter (based on the Broadcom BCM4306 chipset). Although the card is not listed under PCI cards under System Profiler, the card is recognised and appears to work happily with no patches, being recognised under Network/Airport Card as "Third Party Wireless Card" Other Hardware SiL 0680 PCI-IDE controller card, not a hope in hell with OSX (I presume...) Fujifilm S6500FD camera, *edit* Working happily, with Fujifilm FinePix viewer Ver 3.4 Epson R300 printer, also not tested yet. Currently dual-booting alongside XP, using the Chain0 method, both on separate IDE HDDS on the onboard IDE primary interface. XP Master, OSX Slave. All seems well so far... Link to comment Share on other sites More sharing options...
BIG Posted January 8, 2008 Share Posted January 8, 2008 Current OS X Version: 10.5.1 Install method: Kalyway Working: Yes Desktop Prebuilt Manufacturer: Custom Model: Custom Motherboard Manufacturer: Asrock Model:775i65g Version:1 Bios Version: Latest Chipset: 865g, ICH5 Audio: Yes No patches were needed LAN: yes CPU Model Number: Pentium 4 3.0 Ghz Recognised as: 3.0 Ghz Unknown? Memory/DDR:1 Gb Video Manufacturer: Ati Model:Sapphire x1050 Bus Type: AGP8x Memory size: 256Mb Dual screen: Not tested QE/CI Haven't Checked Resolution No Required patches or bios flashing: No SATA/IDE working: Yes Wifi & patches Yes (didn't work) other peripherals/pci addon cards? misc hardware: Link to comment Share on other sites More sharing options...
Papach0ps Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: Kalyway MBR Desktop/Laptop? Desktop Prebuilt? Nope! Manufacturer: hack Model: intosh Motherboard Manufacturer: Intel Model: D865GBF Version: not sure Bios Version: BF86510A.86A.0077.P25 Chipset: Intel i85P/PE/i848P Audio: sound comes out but isn't recognized LAN: working perfect Required patches etc? none for the motherboard that i can find yet CPU Model Number: Intel Pentium D Prescott Recognised as: 3.0 gHz unknown (not sure how to go about helping that situation. More forum searching!) Memory/DDR: 2 gig DDR 800 mHz Video Manufacturer: Nvidia Model: FX 5200 Bus Type: AGP 8x Memory size: 256mb Dual screen working? haven't tested QE/CI working? yes Resolution changeable? yes Required patches or bios flashing? Titan.kext needed to get the vid card working SATA/IDE working: both working perfect Wifi & patches? xxx other peripherals/pci addon cards? xxx misc hardware: no misc hardware installed Link to comment Share on other sites More sharing options...
xavierhunts Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 (KALYWAY_LEO_10.5.1intel_SSE2_SSE3) Install method: Kalyway DVD, MBR/EFI assumed working/Vanilla Desktop Manufacturer: Home Built Model: Custom Motherboard Abit AB9 Pro Manufacturer: Abit Model: AB9 Pro Version:? Bios Version: A22 Chipset: Intel 965 / ICH8R Audio: working HD audio out and audio in, no patches LAN: working great, no patches CPU Model Number: Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor - OEM Recognised as: Overclocked recognized as 2.8GHz Memory/DDR: 4 GB ( 2-2GB ) G.Skill DDR2 1000 Video Manufacturer: EVGA Model:GeForce 7900 GS Bus Type: PCIe x16 Memory size: 256 Dual screen working? have not tested QE/CI working? Resolution changeable? yes Required patches or bios flashing? no patches SATA/IDE working: using both Sata and IDE Wifi & patches? N/A other peripherals/pci addon cards? Sata DVD misc hardware: Thermaltake water cooling Link to comment Share on other sites More sharing options...
thejameshimself Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: KalywayISO+MBR Desktop/Laptop? Desktop Prebuilt? Manufacturer: Dell Model: Optiplex GX620 Motherboard Manufacturer: Dell Model: 0hh807 Bios Version: A11 Chipset: Intel i945G/GZ Rev. A2 Audio: works w/ patches LAN: working CPU Model Number: Pentium D 945 3.4Ghz Recognised as: 3 Ghz Unknown Memory/DDR: 2GB 533MHz Video Manufacturer: ATI Model: Radeon X600 Pro (0x5B62) Bus Type: PCIe x16 Memory size: 256MB !QE/CI NOT working with Callisto 008 Resolution changeable w/ Callisto 008 SATA/IDE working: sata HDD working sata DVD working Link to comment Share on other sites More sharing options...
Zaiden Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: Tiger 10.4.10 upgraded to Leopard ToH. Then installed EFI and upgraded to 10.5.1 using apple updater Laptop Prebuilt Manufacturer: Lenovo Model: Thinkpad T60p model 8742A98 Audio: Working using the Conexant HD Audio Drivers LAN: Woking out-of-the-box CPU Model Number: e.g. Core 2 Duo T7200 Recognised as: e.g. 2.0GHz Memory/DDR: 2GB Video Manufacturer:ATI Model: FireGL V5250 (it is pretty much like the Radeon X1700) Bus Type: PCIe x16? Memory size: 256MB Dual screen working: No QE/CI working: Yes Resolution changeable: Yes, up to 1680x1050 Required patches or bios flashing: No SATA/IDE working: Yes Wifi & patches: Wifi is not working other peripherals/pci addon cards? misc hardware: Genius MousePen 5x4 drawing tablet working using drivers provided in genius website MSI USB US54G Wifi adapter working using Ralink Driver (it has the same chip) Included DVD Writer is working perfectly Bluetooth is working out-of-the-box Link to comment Share on other sites More sharing options...
muitommy Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: TOH RC2 dvd with golden kernel patch Motherboard Manufacturer: inno3d Model: 680iSLI Bios Version: no dependency Chipset: 680iSLI Audio: out of box, 889A LAN: not yet work in Leopard, but work in Tiger CPU Model Number: Quad Q6600 Memory/DDR: OCZ 2x1G SLI Ready Video Manufacturer: Nvidia Model: 8800GT Bus Type: PCI-E 2.0 Memory size: 512mb Dual screen working? probably not QE/CI working? not yet, working experimentally but crash often SATA/IDE working: use Medevil's NforceATA.kext install on IDE first, and use carbon copy cloner, and do boot fix on the sata drive, the sata drive can't be bless, but can locate by grub or chain0/tboot Wifi & patches? belkin fd7050 - work wif RT2500 chipset drivers misc hardware: usb mouse and keyboard are the most preferable ps2 will cause problems, disable of 1394 firewire cause problems too Link to comment Share on other sites More sharing options...
b4ckb0n3 Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 (Vanilla kernel, EFI v8) Install method: Created a image from an original Leopard 10.5.0 DVD, applied Brazilmac patch on it and burnt the resulting image to a DVD (single layer, Brazilmac's patch ripped out a lot of things from the original DVD image). With 10.5.0 working, I installed EFI v8 patch and then I've updated the system to 10.5.1 through Apple Software Update. FIY: before using EFI, the system was recognised as ACPI PC in system profiler. With EFI and BrazilMac's 10.5.0 kernel, it's recognised as X38T-DQ6. With EFI and Apple Vanilla 10.5.1 kernel, it's recognised as a Mac Pro. Motherboard Manufacturer: Gigabyte Model: GA-X38T-DQ6 Version: Rev 1.0 Bios Version: F5 Chipset: Intel X38 Audio: Onboard ALC889A, didn't work by default, needs AppleAzalia kext LAN: Realtek 8111/8169 working without patches CPU Model Number: Core 2 Duo E6750 (2.66 GHz) Recognised as: 2.67 GHz Intel Core 2 Duo Memory/DDR: 2 GB (2x1024), DDR3-1333 Video Manufacturer: MSI Model: GeForce 8800GTX (NX8800GTX-T2D768E-OC) Bus Type: PCIe x16 Memory size: 768MB (dedicated) Dual screen working? Not tested. QE/CI working? Yes full QE/CI Resolution changeable? Yes Required patches or bios flashing? without paches (note that I installed a DVD created from a original one by BrazilMac's patch, so I don't know if there is any kind of patch pre-installed) SATA/IDE working: Yes, AHCI mode USB and 1394 are working fine, all ports. Link to comment Share on other sites More sharing options...
Yingus Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: TOH RC2 dvd with golden kernel patch =>just prepare partition FAT32 on SATA disk, BURN image, boot on, install => freeze at 100%, reboot manualy with option => -s -legacy => remove all Ge*.kext and NV*.kext in Extensions folder and finaly reboot and works fine. Motherboard Manufacturer: ASUS Model: A8NSLI Premium Bios Version: 1.x Chipset: nForce4 SLI Audio: Cmédia ok LAN: MArvell Yukon 88E8001 ok whith skeg.kext on the forum CPU Model Number: X2 3800+ Memory/DDR: (2go) Corsairs 2x512 + Kingston 2x512 Video Manufacturer: Nvidia Model: 7800GT Bus Type: PCI-E 2.0 Memory size: 256mb Clone screen : ok Dual screen : Not yet but it worked fine in 10.4.7 Tiger on the same hardware (i such the good .kext) QE/CI working? - SATA/IDE working: yes fine, MAC install on 4th partition on a SATA externe plug on SATA in cable behind the PC Wifi & patches? no wifi on mobo misc hardware: usb (or PS2) mouse and keyboard wireless logitech ok Link to comment Share on other sites More sharing options...
yheit Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: kalyway 10.5.1, EFI + Vanilla working??? Desktop Prebuilt? no Motherboard:Asus p5b-vm Manufacturer:Asus Model:p5b-vm Version:? Bios Version:? Chipset:Intel G965 ICH8 Audio: working only line out, 2chanels LAN: working out of the box CPU Model Number: Core 2 Duo E6300 Recognised as: 1.86 Memory/DDR:ddr2 667Mhz 2gig Video Manufacturer:Ati Model:x550 Bus Type: PCIe x16 Memory size:256 Dual screen working? QE/CI working:not suported Resolution changeable:yes Required patches or bios flashing:no SATA/IDE working:out of the box Link to comment Share on other sites More sharing options...
tinkertank Posted January 9, 2008 Share Posted January 9, 2008 Abit Airpace AW-GE870 PCI-e WI-FI card does not work. X doesn't even see it. Link to comment Share on other sites More sharing options...
salax Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: Kalyway Desktop Prebuilt? no Motherboard:775Dual-915GL Manufacturer:Asrock Model:775Dual-915GL Version:? Bios Version:? Chipset:Intel 915GL FSB 800, Intel ICH6 Audio: working, 2chanels LAN: not working CPU Model Number: Pentium 4 640+ 3.2Ghz 800 Mhz FSB Recognised as: 3.2 (About this Mac not working, Profiler shows 1 core, Activity monitor shows both cores active!) Memory/DDR:ddr 1 GB Video Manufacturer:Intel Model:915 Bus Type: onboard Memory size:64 Dual screen working? QE/CI working:not suported (!? don't know why, most anybody else's does) Resolution changeable:yes Required patches or bios flashing:no SATA/IDE working: LG IDE DVD-RW worked after installation using external USB case. (b0 error otherwise but when installation finished i had it back in the pc and all is well) SATA HD Hitachi 160 GB ok Link to comment Share on other sites More sharing options...
chilex Posted January 9, 2008 Share Posted January 9, 2008 Current OS X Version: 10.5.1 Install method: Kalyway, fully working Laptop Manufacturer: HP Model: Pavilion dv2322la Motherboard: HP Pavilion dv2000 Manufacturer: Intel Model: Mobile Intel Calistoga-GM i945GM Version: Calistoga-GM i945GM Bios Version:Phoenix Chipset: Audio: Conexant HD Audio Working speaker out only, Using Azalia out in installer LAN: Intel PRO/100 ve not working at install, but i change the kext and now its working Wlan (Wifi) Broadcom 802.11b/g working at install CPU Model Number: Mobile DualCore Intel Pentium T2080 1,73 ghz Recognised as: Intel Core Duo 1,73ghz Memory/DDR: 1GB DDR2-667 DDR2 SDRAM Video Intel 82945GM Manufacturer: Intel Model: 945GM Bus Type: onboard Memory size: 64, i think Dual screen working, not tested QE/CI working Resolution changeable: yes Required patches or bios flashing: none SATA/IDE working: YES Model: Hard Drive: Hitachi HTS541680J9SA00 DVDRW/CDRW Drive MAT{censored}ADVD-RAM Wifi & patches NONE other peripherals/pci addon cards, Card Reader not working, i didtn search The only thing, its the battery meter, i dont have one, the "about this mac" show me that i have a mac pro. Link to comment Share on other sites More sharing options...
A-Man Posted January 10, 2008 Share Posted January 10, 2008 Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1 Laptop Manufacturer: Gateway Model: E-475 Motherboard Manufacturer: Intel Model: Santa Rosa Version:N/A Bios Version:N/A Chipset: GM965 Audio: YES, Patch: http://nawcom.com/osx86/osx-sigmatel-dell.tar.gz LAN: NO CPU Model Number: Core 2 Duo Recognised as: 2GHz Memory/DDR: 2GB Video Manufacturer: Intel Model: X3100 Bus Type: onboard Memory size: 144 (shared) Dual screen working: NO (must use external monitor) QE/CI working: YES Resolution changeable: YES (must use external monitor) Required patches or bios flashing: NO SATA/IDE working: YES Wifi & patches? NOT WORKING) other peripherals/pci addon cards: NO Link to comment Share on other sites More sharing options...
macbuku Posted January 10, 2008 Share Posted January 10, 2008 First of all I want to thanks so much to the Hackintosh Community. Here are my machine: Current OS X Version: 10.5.1 Vanilla, EFI 8.0 Install method: iATKOS Desktop Motherboard Manufacturer: Gigabyte Model: P35-DS4 Version: 2.1 Bios Version: unknown Chipset: P35 (ICH9R) Audio: Working after patched with AppleHDAPatcherv1.20 with ALC889A Codec dump LAN: Working without patch Required patches etc? Yes for my Nvidia 7300GT video card and ALC889A onboard sound CPU Model Number: Core 2 Duo Q6600? Recognised as: 2.4GHz ==> 3.33 GHz(Overclock) Memory/DDR: DDR2 PC6400 800MHz running @ 925 MHz : 4x2gb = 8GB Video Manufacturer: Colorful Model: 7300GT Bus Type: PCIe x16 Memory size: 256MB Dual screen working? not sure QE/CI working? yes Resolution changeable? yes Required patches or bios flashing? patch SATA/IDE working: ICH9R (SATA II - 6 devices) ACPI 2 @ 3GB/s Wifi & patches: Use DWA-547 PCI Rangebooster N650 Draft 802.11n WiFi PCI Card D-Link (Recognized as Airport Extreme) other peripherals/pci addon cards misc hardware: Link to comment Share on other sites More sharing options...
overshoot Posted January 10, 2008 Share Posted January 10, 2008 Current OS X Version: 10.5.1 Install method: KalyWay DVD 10.5.1 with EFI 8 and vanilla kernel Laptop HP Model: DV9530ef Motherboard Bios Version: F22A Chipset: ICH8-M Audio: working with taruga patch : ALC268 LAN: working with no patches : RTL8169 CPU Intel Core 2 Duo : T5450 Frequency : 1,66Ghz Memory : DDR2 2Ghz 667Mhz Video NVidia Model: 8400m GS Bus Type: PCIe x16 Memory size: 128M QE/CI working with nvinject 0.21 and 10.5.2 opengl beta drivers Resolution is changeable up to 1440x900 SATA working : ICH8-M AHCI Wifi Intel 3945 is not working : beta drivers cause a kernel panic... misc hardware: HP built-in Webcam is working : detected as a usb webcam : Not working under photobooth Link to comment Share on other sites More sharing options...
Crawley Posted January 11, 2008 Share Posted January 11, 2008 Current OS X Version: 10.5.1 Install method: ToH 10.5, applied EFI 8 and vanilla kernel+SystemUpdate to 10.5.1 Desktop Model: Custom Motherboard: Asus P5B Audio: onboard, output only with azalia LAN: onboard, working with no patches CPU Intel Dual Core E2140, recognized as Core 2 Duo Frequency : 1,6Ghz Memory : DDR2 1GB 667Mhz Video NVidia Model: Asus EN7300GT Silent Bus Type: PCIe x16 Memory size: 256M QE/CI working: yes Resolution changeable: yes Dual Screen: yes Patches: Natit dual 0.2 SATA working : yes misc hardware: MSI Starcam 370 not working Wacom Volito Graphic tablet working in mouse mode only Link to comment Share on other sites More sharing options...
Recommended Posts