kaneda Posted October 16, 2007 Share Posted October 16, 2007 About freezes and "right click prob" it is Stuffit prob =) Just install update. On my configuration now it working perfectly! Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-472447 Share on other sites More sharing options...
hank hill Posted October 16, 2007 Share Posted October 16, 2007 I installed tubgirl (tub_Osx10410_AMDVM_SSE3) with VMware 6 on a Acer Aspire M1100 installed fine, decent speed sound works but stutters (any solution for this??) Cant yet get videocard to work Radion X1200 (onboard) anyone know how to get this to works ?? still playing around with it will post more info later. also anyone know the different between tub_Osx10410_AMDVM_SSE3 and tubgirl 10.4.10 AMD SSE3 Test 1 thanks Hank OSX been on my system for a couple or hours, networking works, still cant find solution to stutter sound and getting graphics to work downloading iwork trial to see if it installs Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-472872 Share on other sites More sharing options...
hank hill Posted October 17, 2007 Share Posted October 17, 2007 Tried burning CD no luck, is there a work around for cd/dvd burn or do you need a certain drive ?? Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-472971 Share on other sites More sharing options...
knobi Posted October 17, 2007 Share Posted October 17, 2007 I installed tubgirl (tub_Osx10410_AMDVM_SSE3) with VMware 6 on a Acer Aspire M1100 installed fine, decent speed sound works but stutters (any solution for this??) Cant yet get videocard to work Radion X1200 (onboard) anyone know how to get this to works ?? still playing around with it will post more info later. also anyone know the different between tub_Osx10410_AMDVM_SSE3 and tubgirl 10.4.10 AMD SSE3 Test 1 thanks Hank Hey mate. Is that the one you can natively boot into OSX and install or is it only for VMware? Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-473043 Share on other sites More sharing options...
hank hill Posted October 17, 2007 Share Posted October 17, 2007 You can boot from the dvd and install or use VMware, I want to see how well it works before I comit to a "Real" install been running for over 12 hours in the VM and no crash, so its seems pretty stable, just have to find a fix for the stuttering sound and driver for vid card Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-473231 Share on other sites More sharing options...
Guest Snowski Posted October 18, 2007 Share Posted October 18, 2007 Tried burning CD no luck, is there a work around for cd/dvd burn or do you need a certain drive ?? I forgot all about this but I needed it to be able to burn with my Philips DVDRW. http://www.patchburn.de/ Good luck! Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-473956 Share on other sites More sharing options...
Henry Chim Posted October 18, 2007 Share Posted October 18, 2007 Hey guys does the AMD 690G chipset SATA work? In fact does the 690G chipset work in the first place? Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-473986 Share on other sites More sharing options...
bozotheclown Posted October 26, 2007 Share Posted October 26, 2007 any tips? I installed this release on my usb connected wd160GB. I formatted it to FAT32 first (100GB partition) booted the 10.4.10 tugbirl dvd followed the instructions for usb hd install. It installs great (slow, seems usb when the ports and device are usb2) and boots too but....... it keeps repeating "waiting for root device" when it does that, I switch off my usb hd, switch it back on again and the boot continiues. When the boot is finished sound works:) The mouse and keyboard don't. (ps/2 keyboard, usb mouse) I unplug the mouse and plug it back in again and the mous works. No such trick for the keyboard:( I put some files on a usb stick to get my wifi working but the usb stick doesn't work. I've tried jas releases before (not satisfied with them, never really worked, sata troubles, was some time ago) and the same stick worked. How can I overcome all of this? ow, in case you wonder...... DFI LP NF4 Ultra-D Opteron 185 4x1GB Kingston HyperX 2xSeagate 160GB sata-2 Raid-0 2xSeagate 500GB sata-2 Raid-0 NEC 4550 DVD everything:) RT2500 PCI wifi NVidia 8800GTX I'd like OSX to run on a partition on the 320GB raid-0 NVRaid but since that doesn't work I figure I test it out on the USB HD first before I decide to de-raid the 2 disks and give one to Vista and the other to OSX:) It appears as though "Tubgirl" has made another release. This time, it's 10.4.10 for AMDs (as usual), but for SSE3 only. You can pick it up on The Pirate Bay ("Tubgirl" is not in the torrent's name, though). Unfortunately, this is untested on Intel, and I don't have an AMD. I don't feel I should bother to test it, I'll leave that up to the AMD users. It appears as though SSE2 emulated kernels will be coming soon in a PPF. Post your success/horror stories and questions here, if you feel like it. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-482771 Share on other sites More sharing options...
Dushie Posted October 30, 2007 Share Posted October 30, 2007 hi all after going though this post i have succesfully instaled 10.4.10 version , i installed on a 9 gb partition, it occupied around 2.8 gb space , i have other partitions too that have free space, but i am only able to view and play files on those partion not able to copy and move anything there, also by default all the programs i am downloading and installing like yahoo messenger or other are being downloaded on desktop and being installed there, please help as to how i can download them somewher else and use other partitons for storage as right now i am not able to copy or move anything there Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-487418 Share on other sites More sharing options...
NUCLEaR Posted October 30, 2007 Share Posted October 30, 2007 downloading now and trying on the "impossible" Dimension E521. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-487541 Share on other sites More sharing options...
prudenth Posted October 31, 2007 Share Posted October 31, 2007 where i can find tubgirl 10.4.10 AMD?. i searched in the bay of pirates , but nothing, give a clue thnks Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-489491 Share on other sites More sharing options...
feriso Posted October 31, 2007 Share Posted October 31, 2007 In Hell Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-489524 Share on other sites More sharing options...
Roike Posted November 1, 2007 Share Posted November 1, 2007 search for amdvm on the bay of pirates... it says you only have one seeder..but dont worry... there are many Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-489532 Share on other sites More sharing options...
Ruud Posted November 2, 2007 Share Posted November 2, 2007 installed succesfull on my jas amd 10.4.8. Only thing is it is slower on my acer 5024. With Jas 10.4.8 the system worked at 1800 mhz and now with the 8.10.1 kernel it is 800 by default. Does anyone know how i can turn it back to 1800? as far as I know this kernel doesn't support speedstep and amd powernow etc at the moment. Thanks Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-491878 Share on other sites More sharing options...
Johndoe60914 Posted November 4, 2007 Share Posted November 4, 2007 can anyone conferm this working with nForce 405,GeForce6100,AMD Sempron 3000+? Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-494351 Share on other sites More sharing options...
bliss Posted November 5, 2007 Share Posted November 5, 2007 does this work on turion 64 X2 laptops? Medion MD96360 (same as MSI S271 with better components) Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-495539 Share on other sites More sharing options...
Johndoe60914 Posted November 5, 2007 Share Posted November 5, 2007 Thanks for the reply Myzar, problem is I have tried my pioneer 109 and a new pionner multi layer dvd drive model was 112, got the same read write error except with the other drive it panic'd after about 5 sam read write errors, the drive before just gave me pages and pages of sam errors. If I mount the iso with demon tools and try to boot it in vmware I get a waiting for root device. I am gonna experiemnt some more today when I get back from work. I'll maybe catch you on irc if you are around( my nick is mulla), I really want to nail this issue as I lost all my 0sx86 files so building a 10.4.9/10 manually from 10.4.6 is a real pain now. fingers crossed i can get this to work. KK I think I am having the same issue I have a screen shot here so you can see exactly what I do. My Rig : Asrock K8NF6G-VSTA With newest bios update, Sata Capable but no sata drives connected AMD Sempron 3000+@2.15 (over clocked from 1.8) 1.5 gig of DDR Ram @ 400mgz nForce 405 W/nVidia 6100 (256 shared) 1 80 gig IDE Western Digital HDD 1 Lite-on-it DVD-RW Drive(SHW-160P6S w/ newest Firmware) Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-495765 Share on other sites More sharing options...
notfamous Posted November 6, 2007 Share Posted November 6, 2007 the is the 3rd version of osx86 I have tried. I run into the same freakin issue. Install makes it to the end, I reboot and get stuck at the pre-bios screen. It will not even boot past my bios logo. I have tried installing on HDD via PATA or USB external and I can't get my bios to even see my HDD after the installs. I have to load up my Windows HDD to boot anywhere. Can someone please help me. I've tried reading through a lot of stuff but I still get the feeling that I'm over looking something. Thanks! Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497652 Share on other sites More sharing options...
cbmkgd Posted November 7, 2007 Share Posted November 7, 2007 I can't get my bios to even see my HDD after the installs. I have to load up my Windows HDD to boot anywhere. How did you prepare your osx partition? Usually, one creates a fat32 primary partition of appropriate size (before any extended partition if any), then one boots on the osx dvd. There, one uses the diskutility to erase the above fat32 partition, choosing hfs+ format. I say this because you might have instead partitioned the drive with diskutility, in which case you must set it as MBR partitioning. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497882 Share on other sites More sharing options...
andytof47 Posted November 7, 2007 Share Posted November 7, 2007 can anyone conferm this working with nForce 405,GeForce6100,AMD Sempron 3000+? I have the same chipset on my motherboard and was wondering if there is a patch or something because I have tried with a SATA drive and upon installing it, it locks on the part where you either partition the drive, or if you have already created a partition on a working PC then transfered the disk with the nice SATA partition it locks on the install part..... I also tried with a pata/ide drive but I'm still getting a lock up..... so is there something needing to be done here for this chipset ??? Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497888 Share on other sites More sharing options...
notfamous Posted November 7, 2007 Share Posted November 7, 2007 How did you prepare your osx partition?Usually, one creates a fat32 primary partition of appropriate size (before any extended partition if any), then one boots on the osx dvd. There, one uses the diskutility to erase the above fat32 partition, choosing hfs+ format. I say this because you might have instead partitioned the drive with diskutility, in which case you must set it as MBR partitioning. Im using an extra hard drive. Can I simply format the entire HDD to fat32 then when booted from dvd run apple disk utility to simply erase the entire HDD in "mac OS extended (journaled)? I tried this on uphuck v1.4a but not on the Tubgirl install. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497948 Share on other sites More sharing options...
cbmkgd Posted November 7, 2007 Share Posted November 7, 2007 Well, if that's what you tried with u1.4a and it didn't work, not sure you'll have better luck with tg. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497965 Share on other sites More sharing options...
notfamous Posted November 7, 2007 Share Posted November 7, 2007 what could be the issue? This whole the is fin to figure out but now I'm just frustrated! Haha! Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-497986 Share on other sites More sharing options...
E@zyVG Posted November 7, 2007 Share Posted November 7, 2007 Well I have successfully installed Tubgirl 10.4.10 (AMD Test 1 DVD image) on my nForce4 Ultra motherboard on SATA drive. Full spec of my PC used is: Athlon64 Venice Core (SSE2/3) DFI nForce4 Ultra SATA Drive (on 2nd primary partition) built-in Ethernet is working built-in sound NOT TESTED ATI X800 GTO2 PCI-E Audigy 2 ZS I have 3 SATA drives, first two being used by Linux and 3rd now by Vista and Tubgirl 10.4.10 (1st partition=Vista, second=10.4.10, third for windows data). What I would like to know more is how can I manage to install my ATI X800 GTO2 PCI-E card, so I have openGL and 1680x1050 resolution (currently 1280x1024x32)-- this is really very much WANTED. Is it possible to use Audigy 2 ZS PCI sound card? Can I manage my wireless -> Asus WL-130g, based on Ralink rt2500 chipset, to work, preferably with SoftAP mode, or at least in Ad-Hoc so I can connect two PCs wirelessly. P.S. My first native OSX Hackintosh install -> Thank you Tubgirl and the community. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-498014 Share on other sites More sharing options...
notfamous Posted November 7, 2007 Share Posted November 7, 2007 I'm going to try using gparted and flag the hd for boot. Running install now. Will update in about 30 mins. Link to comment https://www.insanelymac.com/forum/topic/57449-tubgirl-10410-amd-sse3-test-1/page/12/#findComment-498051 Share on other sites More sharing options...
Recommended Posts