[pre-release] macOS Ventura

[bisdak4920]

9 hours ago, meaganmargaret said:

 

Was this a Clover or an OC install?   And where might this Ventura installer be found?

OC install. I have 3 ssd each for Monterey, Ventura and Windows 11. I boot from Monterey and run @chris1111 installer from there. The rest is history. The installer can be downloaded here - https://www.hackintosh-montreal.com/download?id=6849

 

Edited July 16, 2022 by bisdak4920

[Slice]

8 hours ago, deeveedee said:

@Slice Does this mean that if needed, we can install kexts in /L/E and repair owner/permissions or delete kexts from /L/E without needing to rebuild kextcache?

Without.

Moreover "repair permission" is not needed if you "install" kexts by terminal copy

sudo cp -R my.kext /Library/Extensions/

See a procedure how to install VoodooHDA in my signature.

[SavageAUS]

Finally up and running on Beta 3 fresh install on AMD.

Could not have done it without @fabiosun over on https://www.macos86.it/ 

 

Spoiler

 

Spoiler

 

config.plist.zip

Edited July 16, 2022 by SavageAUS

[Joshua60]

15 hours ago, 5T33Z0 said:

@Joshua60 You know that I already linked you a guide to fix this, right? https://github.com/5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore/blob/main/I225_stock_vs_cstmfw.md

@5T33Z0 thanks for your reply. Yes I am aware of your very good guide. Till now I haven't used it because Internet with Ventura were fine.

I guess because we have different motherboards. But now I have to take care of it.

 

Thank you so much for your support.

[Guest 5T33Z0]

@Joshua60 That's cool. Then your MoBo probably has a newer revison of the I225-V which can utilize the Dext version of the driver out the box without issues. Now you only need ti fix the 7 MB issue with your iGPU

[Joshua60]

16 hours ago, ricoc90 said:

I don't really feel like reading back the comments to figure out what your current progress on the matter is, so you'll have to excuse me if I'm repeating.
dk.e1000=0 is for Big Sur, e1000=0 is for Monterey, so it makes sense that the NIC works in Big Sur and Monterey.

In Ventura however AppleIntel210Ethernet.kext got removed and the NIC connects to the dext instead. As far as I've understand you can just inject AppleIntel210Ethernet.kext through OC and use e1000=0 to have your NIC connect to it.

 

Edit: Which is actually beautifully explained in much more detail by 5T33Z0 in their linked guide (section Stock Firmware Users): https://github.com/5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore/blob/main/I225-V_FIX.md#option-1-using-a-ssdt-with-corrected-header-description

@ricoc90 thanks for correcting me and also for your very good explanation about applying @5T33Z0 guide. I will try asap.

 

Thank you so much for your post.

[HyperX7]

On 7/12/2022 at 1:57 PM, greythorne said:

There is this update Ventura B3 with a size of 500mb, when i tried to update it says update failed offered the full update.

 

This has been happening to since beta 1 to beta 2 and beta 2 to beta 3.

 

Anyone knows why?

Same for me but have no idea.

[Guest ricoc90]

6 minutes ago, HyperX7 said:

Same for me but have no idea.

If you're using BlueToolFixup, disable it and reboot. You can enable it again after the update of course.

 

Edited July 16, 2022 by ricoc90

[BALDY_MAN]

Abit late to the party with my Z97 Hack.  its all sunny I'm my Hackintosh Garden

Thanks to bisdak4920 for sharing his EFI. for my Z97 Hack

Edited July 17, 2022 by BALDY_MAN

[SavageAUS]

Has anyone noticed there hard drive filling up on Ventura? In particular the cache folder located in your home directory-> Library. I have 100GB partitioned for it and it’s consistently filling up. 

[aufuk1]

On 6/30/2022 at 11:11 PM, chris1111 said:

HP Elitebook 840 G4 everithings work well

Dont worry be Happy 

 

 

To make batterie working you need to setup config like that

 

Hi   chris1111 

 

Can you share your efi folder with us

Edited July 17, 2022 by aufuk1

[iCanaro]

On 7/14/2022 at 7:22 PM, Slice said:

Clover WIKI

 

OC configuration pdf

[Shaneee]

Any one else had issues with Private Relay? Same issue on a clean install and when upgraded from Monterey where it worked without issue. This has happened on all the betas so far,

 

[Shaneee]

The strange part is this is the updated system from Monterey where it worked just fine. 

[aufuk1]

Hi, how can i fix this error

 

Error: appleintellpssi2ccontroller ftimerservicematching timed out

 

My screen is not touchscreen. I don't know how to remove everything related to VoodooI2C

 

HP 840 G4, i7 7600U, HD Graphics 620, 16 gb ram

 

Efi folder

https://easyupload.io/7c78hj

Edited July 19, 2022 by aufuk1

[surenmunoo]

8 hours ago, Shaneee said:

Any one else had issues with Private Relay? Same issue on a clean install and when upgraded from Monterey where it worked without issue. This has happened on all the betas so far,

 

Mine works fine,

[miliuco]

@Shaneee

It happens to me also. I think there is a system setting that prevents Private Relay to turn on. But I don't know what is causing this.

[PoMpIs]

@Shaneee @miliuco  It works for me..... But it is not something that I do not care that I will not use

 

 

 

I already take care of blocking content with a PC converted into a NAS ( UNRAID), with PiHole, and Nextcloud as my personal cloud

 

 
 

 

 

 

Edited July 19, 2022 by PoMpIs

[Slice]

On 7/18/2022 at 11:52 AM, iCanaro said:

 

OC configuration pdf

Sorry I not agree.

EnableSafeModeSlide cause Mojave to panic. I had to disable this quirk and both system now works.

ProtectMemoryRegions is safe quirk needed for those who uses CSM.

[Irish_Man]

@Shaneee you using VPN or some kind of ad block?

[miliuco]

2 hours ago, Irish_Man said:

@Shaneee you using VPN or some kind of ad block?

I don’t have VPN or adblock. SIP and gatekeeper enabled. Even checked /etc/pf.conf file to see if there is a strange line that don't match the default macOS ones (read somewhere as related with Private Relay error). 
Same error as @Shaneee and @eSaF

[deeveedee]

On 7/19/2022 at 9:56 AM, aufuk1 said:

Hi, how can i fix this error

 

Error: appleintellpssi2ccontroller ftimerservicematching timed out

 

My screen is not touchscreen. I don't know how to remove everything related to VoodooI2C

 

HP 840 G4, i7 7600U, HD Graphics 620, 16 gb ram

 

@aufuk1 Did this error occur with previous versions of macOS (before Ventura)?  You're posting in a Ventura pre-release thread, so I'm just checking.  If this error is not unique to Ventura and you do experience this error in mature releases of macOS (e.g. Big Sur, Monterey), it's best to resolve issues like this with a stable macOS release (just my opinion) and not in a Beta version of macOS.

 

In your OC config.plist,  you enable the kexts listed below.  How did you determine that your rig needs all of these kexts?

• Item 5: VoodooI2C.kext/Contents/PlugIns/VoodooInput.kext
• Item 6: VoodooPS2Controller.kext/Contents/PlugIns/VoodooInput.kext
• Item 7: VoodooRMI.kext/Contents/PlugIns/VoodooInput.kext
• Item 14: VoodooInput.kext
• Item 15: VoodooI2C.kext/Contents/PlugIns/VoodooGPIO.kext
• Item 16: VoodooI2C.kext/Contents/PlugIns/VoodooI2CServices.kext
• Item 17: VoodooI2C.kext
• Item 18: VoodooI2CHID.kext
• Item 19: VoodooPS2Controller.kext
• Item 20: VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Keyboard.kext
• Item 21: VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext
• Item 22: VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Mouse.kext
• Item 23: VoodooSMBus.kext
• Item 24: VoodooRMI.kext
• Item 25: VoodooRMI.kext/Contents/PlugIns/RMISMBus.kext

 

EDIT: In my HP laptop (a different model), I inject only VoodooPS2Controller kexts (no RMI or I2C kexts or SMBUs kexts).  I also block Apple's I2C kexts with the following:

 

Block Apple I2C kexts

Spoiler

 

EDIT2: I forgot to mention that while I was reviewing your config.plist, I noticed that you enable ECEnabler.kext and you inject Device EC with your SSDT-EC-USBX.aml SSDT.  I don't use ECEnabler.kext so I'm not sure, but is this the correct use of ECEnabler.kext?   After reading about ECEnabler.kext, I see that your use of the kext and SSDT are perfectly acceptable (if they are necessary).

 

You will want to resolve this in a different thread (not in the Ventura pre-release thread).

Edited July 20, 2022 by deeveedee

[Guest ricoc90]

2 minutes ago, deeveedee said:

How did you determine that your rig needs all of these kexts?

They're collectables! Gotta collect them all! 

In all seriousness, 
@aufuk1 Determine if your trackpad is SMBus or l2c, then keep its respective kexts and get rid of the others. See https://github.com/VoodooSMBus/VoodooRMI#compatibility
 

Anyway this isn't really the place for it, so you might want to open your own thread for it since it's not Ventura related

[iCanaro]

7 hours ago, Slice said:

Sorry I not agree.

EnableSafeModeSlide cause Mojave to panic. I had to disable this quirk and both system now works.

ProtectMemoryRegions is safe quirk needed for those who uses CSM.

 

I agree with you, if your system works with a different setting from mine, I have no objection. With EnableSafeModeSlide enabled my mojave on Z370 starts and runs smoothly.

I checked, my BIOS is set for UEFI boot, so CSM is disabled, consequently ProtectMemoryRegions is set to No as well

[PoMpIs]

@miliuco @eSaF  ....  But this limit IP tracking is activated by default? ... I do a clean installation and I have this on ethernet:

 

 

and in the Lenovo 520s the same... it limits the tracking by default ¿?¿?

I had no idea about that option. 🤷‍♂️