lygi Posted October 30, 2019 Share Posted October 30, 2019 On 10/27/2019 at 9:51 PM, AudioGod said: Save your bios and reset it by removing the battery for a minute or two and then put the battery back and load in your saved bios and try again without slide=0 and with your igpu disabled in the bios too if it’s not already Sent from my iPad using Tapatalk small update. Bios reset, batt of for the night, all works now like it should. Also I've unplugged my wifi card from mobo and plugged BT usb dongle. sleep works and waking with apple BT keyboard works. Thanks a lot! Ah! 10.15.1 will kill your graphic without updating WTG (1.3.4) Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2695502 Share on other sites More sharing options...
AudioGod Posted October 30, 2019 Share Posted October 30, 2019 Just now, lygi said: small update. Bios reset, batt of for the night, all works now like it should. Also I've unplugged my wifi card from mobo and plugged BT usb dongle. sleep works and waking with apple BT keyboard works. Thanks a lot! Ah! 10.15.1 will kill your graphic without updating WTG (1.3.4) I’m glad it’s all working for you buddy. I have a brand new efi and dsdt for Catalina and the new bios revision for the Z390 pro (major bios update) you can find it all on my thread here..... 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2695503 Share on other sites More sharing options...
giorov Posted November 1, 2019 Share Posted November 1, 2019 (edited) Hey all, thanks for resurrecting the thread! I am running Mojave 14.6 on the latest update with the latest clover and Audiogod's EFI from a couple months ago and all is good minus that I can't get a Presonus Quantum 2 thunderbolt driver to run properly. I'm using aGC Alpine Ridge 2.0 add-in card with a StarTech TB2 adapter. But quantum_driver.kext doesn't run and the interface remains an unidentified device, soI'm troubleshooting that with Joevt over at tonymac https://www.tonymacx86.com/threads/using-a-presonus-quantum-thunderbolt-2-audio-interface-help.226705/page-30 . EDIT: Joevt just figured it out! So if anyone is trying to get a PreSonus audio interface working, Audiogods EFI, plus this fix does the trick on Mojave 14.6! Thanks! Edited November 1, 2019 by giorov Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2695691 Share on other sites More sharing options...
Bill_h4ze Posted November 9, 2019 Share Posted November 9, 2019 On 10/27/2019 at 10:04 PM, AudioGod said: @lygi Here you go give your EFI a try now and see if its made any difference? EFI.zip Hello Dude, nice and awesome work ! I replaced my onBoard Wifi Card with DW1560 and load all kext's into other... but the card is not showing up.... Did you deactivate this USB ? And if yes.... how to activate ? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2696700 Share on other sites More sharing options...
JPKetchum Posted November 11, 2019 Share Posted November 11, 2019 I have pretty much the same setup as Glasgoods. I would like to configure mine to run headless with IGPU and dGPU. Does anyone know how to do this with a 19.2 SMBIOS Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2696999 Share on other sites More sharing options...
pats123 Posted November 14, 2019 Share Posted November 14, 2019 (edited) Hi, thank you for this amazingly detailed guide. But i have some issues on installing op system. My build: Auros Elite 5700 XT Sapphire i9-9900k 970 EVO PLUS ssd I tried many different guides but yours is the only one thats not crashing before getting to the install menu. But with your guide after the text runs off and should pop up the install page my screen goes black and stays black. Please help. Edited November 14, 2019 by pats123 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2697434 Share on other sites More sharing options...
fredouille Posted November 16, 2019 Share Posted November 16, 2019 hello As you have a 5700xt, you should add boot arg in clover configurator ( or in clover option at boot: "agdpmod=pikera") Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2697619 Share on other sites More sharing options...
seimen_x Posted November 17, 2019 Share Posted November 17, 2019 Hey Glasgood, thank you so, so much for this awesome Tutorial. It worked like a charm and I am really happy with my Hackintosh. I used almost the same Specs as you (Same Motherboard), except for different Ram (G-Skill) and H60 Watercooler from Corsair, and Saphire R580. However unfortunately all my USB 3 Ports including the USB C port on the Backside do not work. Only the USB 2.0 work. I saw that you have a tutorial but I get Error 404 and I am stuck. Any help, advice or tipps would be greatly appreciated. My EFI can be found here: https://www.evernote.com/shard/s342/sh/8a583f81-5e2f-408c-a354-21aef6cc4754/20a6da56f955d4055e240c03f8eb7280 Thanks again for your amazing tutorial and sharing of your knowledge. this is my first Hackintosh build and thanks to your EFI Files and great tutorial it worked great! Greetings from Snowy Switzerland Simon config.plist Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2697729 Share on other sites More sharing options...
glasgood Posted November 17, 2019 Author Share Posted November 17, 2019 1 hour ago, seimen_x said: Hey Glasgood, thank you so, so much for this awesome Tutorial. It worked like a charm and I am really happy with my Hackintosh. I used almost the same Specs as you (Same Motherboard), except for different Ram (G-Skill) and H60 Watercooler from Corsair, and Saphire R580. However unfortunately all my USB 3 Ports including the USB C port on the Backside do not work. Only the USB 2.0 work. I saw that you have a tutorial but I get Error 404 and I am stuck. Any help, advice or tipps would be greatly appreciated. My EFI can be found here: https://www.evernote.com/shard/s342/sh/8a583f81-5e2f-408c-a354-21aef6cc4754/20a6da56f955d4055e240c03f8eb7280 Thanks again for your amazing tutorial and sharing of your knowledge. this is my first Hackintosh build and thanks to your EFI Files and great tutorial it worked great! Greetings from Snowy Switzerland Simon config.plist Please use the EFI attached to @AudioGod's thread. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2697735 Share on other sites More sharing options...
pkdesign Posted November 20, 2019 Share Posted November 20, 2019 I'm having an odd issue with my build. Not sure if anyone else does. I've been using my hack for at least five months. This week I plugged in an old monitor into the HDMI on the motherboard and it crashed my whole system. Leaving it plugged in after restart the computer crashed after a minute or so. Can I not use the internal HDMI port? I am using WG 1.3.4 and Lilu 1.3.9 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2698104 Share on other sites More sharing options...
AudioGod Posted November 20, 2019 Share Posted November 20, 2019 38 minutes ago, pkdesign said: I'm having an odd issue with my build. Not sure if anyone else does. I've been using my hack for at least five months. This week I plugged in an old monitor into the HDMI on the motherboard and it crashed my whole system. Leaving it plugged in after restart the computer crashed after a minute or so. Can I not use the internal HDMI port? I am using WG 1.3.4 and Lilu 1.3.9 You can use the internal igpu with a gpu in headless mode only. You can not have it as a second gpu and use it’s outputs. That will indeed freak out your hack and make it crash. add a second rx570 if you want more outputs bud. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2698109 Share on other sites More sharing options...
Pierreko Posted November 20, 2019 Share Posted November 20, 2019 I'm having very big freezes when I use my mac (same config). I have the mouse color wheel that appears and my mac freeze for 10-50s randomly and very often... Can anyone help me ? Thanks ! EFI mac 2.zip Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2698110 Share on other sites More sharing options...
AudioGod Posted November 20, 2019 Share Posted November 20, 2019 1 minute ago, Pierreko said: I'm having very big freezes when I use my mac (same config). I have the mouse color wheel that appears and my mac freeze for 10-50s randomly and very often... Can anyone help me ? Thanks ! EFI mac 2.zip try my EFI or ask for help here bud Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2698112 Share on other sites More sharing options...
kabobslice Posted November 21, 2019 Share Posted November 21, 2019 Does anyone know if it’s possible to get this motherboard working with the intel IGPU?? I currently have a dual boot windows and Mac running on a RX580 GPU. I use my Mac for document typing work and other none gpu intensive work stuff and I play games on windows. I really want to use my Nvidia RTX graphics card while gaming but obviously would have to switch it out with rx580 every time I want to use it -_-. Anyone know if it’s possible to plug the RTX graphics card into the motherboard and only boot Igpu when I’m booting into Mac? Is this tried and true or a failed venture ? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2698247 Share on other sites More sharing options...
jimborae Posted December 3, 2019 Share Posted December 3, 2019 Thanks for this guide, I'm using the same board & a Sapphire rx570 gpu. Thankfully everything seem to be working fine. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2699505 Share on other sites More sharing options...
corrie Posted December 21, 2019 Share Posted December 21, 2019 Will a 5700 XT Card work with this guide? I already have it running on my PC via the UHD630 EFI, but just recently purchased an XT so I'm wondering if i switch the EFI's and install the card, will it work? Thanks in advance to anyone who replies Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2701372 Share on other sites More sharing options...
AudioGod Posted December 21, 2019 Share Posted December 21, 2019 7 hours ago, corrie said: Will a 5700 XT Card work with this guide? I already have it running on my PC via the UHD630 EFI, but just recently purchased an XT so I'm wondering if i switch the EFI's and install the card, will it work? Thanks in advance to anyone who replies Yes it will work if you go to my thread and download the newest Navi version of my EFI buddy Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2701405 Share on other sites More sharing options...
diplingy Posted January 6, 2020 Share Posted January 6, 2020 Hi everybody, I have nearly the same configuration as @glasgood's setup - the tutorial is amazing, thanks. including the thunderbolt board. The biggest difference is that I'm running a AMD RX Vega 56 8GB card. I'm using the Aorus Pro EFI Vega 56 EFI provided by glasgood at the end of his tutorial. I've installed using an old monitor with a HDMI to DVI converter. The system setup beautifully and ran without any problems. I've now moved it to two bigger monitors, that are attached through the display port. Now I get sudden random freezes, where the mouse disappears and the picture still is on the display. (Even pushing the reset button will not reboot - I have to switch off the machine!!) Could anybody help me what the issues could be? thanks yp Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2703109 Share on other sites More sharing options...
jig1056 Posted January 15, 2020 Share Posted January 15, 2020 does anyone know where I can get the EFI zip file mentioned in the article? The link doesn't work at this time. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2704373 Share on other sites More sharing options...
AudioGod Posted January 15, 2020 Share Posted January 15, 2020 10 minutes ago, jig1056 said: does anyone know where I can get the EFI zip file mentioned in the article? The link doesn't work at this time. go here for the Z390 Pro, this is an older guide and has now been updated. You can find a link to the new guide inside my thread. EFI for Z390 Pro 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2704375 Share on other sites More sharing options...
Szeb1 Posted January 23, 2020 Share Posted January 23, 2020 Is it okay that I'm using the Intel UHD630 efi (imac 18,1) but with an RX580 (connected with HDMI)? I couldn't install using the Z390 efi. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2705366 Share on other sites More sharing options...
angegabriel2k3 Posted January 26, 2020 Share Posted January 26, 2020 Excellent !!! Very good TUTO ! ^^ Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2705799 Share on other sites More sharing options...
StuW Posted January 29, 2020 Share Posted January 29, 2020 (edited) Best guide yet!! Thanks so much for this. Have gotten a lot of things working on my Aorus pro wifi with i7-9700. Am still waiting for add on wifi/BT card but THANKS. Would appreciate your thoughts on graphics acceleration though. Am running a Sapphire RX5700 XT Nitro+. Haven’t done a frame buffer adjust as yet BUT ... whilst “about this MAC” reports the card “OK” (attached) Fusion360 (one of my major use cases) reverts to software rendering as it apparently doesn’t see it Edited January 29, 2020 by StuW Idiot writer added upside down screen grab Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2706217 Share on other sites More sharing options...
StuW Posted January 29, 2020 Share Posted January 29, 2020 41 minutes ago, StuW said: Best guide yet!! Thanks so much for this. Have gotten a lot of things working on my Aorus pro wifi with i7-9700. Am still waiting for add on wifi/BT card but THANKS. Would appreciate your thoughts on graphics acceleration though. Am running a Sapphire RX5700 XT Nitro+. Haven’t done a frame buffer adjust as yet BUT ... whilst “about this MAC” reports the card “OK” (attached) Fusion360 (one of my major use cases) reverts to software rendering as it apparently doesn’t see it Ok - looks like this is as good as I’ll get in Mojave. Bit more reading and I think I’ll need Catalina !? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2706222 Share on other sites More sharing options...
xehykiz Posted January 30, 2020 Share Posted January 30, 2020 thanks Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/61/#findComment-2706369 Share on other sites More sharing options...
Recommended Posts