AntoineWill Posted October 20, 2019 Share Posted October 20, 2019 Hi everyone. I enjoy my hackintosh thanks to @glasgood for 3/4 months now but I have an issue that I can’t revolve on my own (oh god I’ve tried really hard..) : all the USB ports seems to work BUT I can’t plug a usb2 devise on a usb3 port like any computer. I can’t understand why. I need those working ports because most of my devices (music equipments) needs usb2... any help would be awesome !!! Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2694310 Share on other sites More sharing options...
glasgood Posted October 20, 2019 Author Share Posted October 20, 2019 6 hours ago, AntoineWill said: Hi everyone. I enjoy my hackintosh thanks to @glasgood for 3/4 months now but I have an issue that I can’t revolve on my own (oh god I’ve tried really hard..) : all the USB ports seems to work BUT I can’t plug a usb2 devise on a usb3 port like any computer. I can’t understand why. I need those working ports because most of my devices (music equipments) needs usb2... any help would be awesome !!! Hi, Use AudioGod’s updated EFI folder for your hack, link below https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/ Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2694323 Share on other sites More sharing options...
AntoineWill Posted October 20, 2019 Share Posted October 20, 2019 6 hours ago, glasgood said: Hi, Use AudioGod’s updated EFI folder for your hack, link below https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/ THANKS !! God, this is perfect. You guys rock ! 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2694356 Share on other sites More sharing options...
JPKetchum Posted October 24, 2019 Share Posted October 24, 2019 On 3/6/2019 at 1:58 AM, glasgood said: System Information - PCI Hey Glasgow... how did you enable this setting in your build, System info PCI? I have the same Aorus Z390 pro board as well. your EFI zip did not work on my configuration though. Attachments. this is the one I made that works stable for now. EFI.zip Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2694912 Share on other sites More sharing options...
benjiolino Posted October 26, 2019 Share Posted October 26, 2019 Hello Glasgood, I'm trying to install with your settings and files since 2 days and always getting following error: Forcing CS_Runtime for entitlement: com.apple.rootless.installgetexceptionlist: failed to open /private/var/db/systempolicyconfigutration/hardeningexceptions.plistcreating RAM disk for var/log I have the same hardware then you ( Z390 Aorus Pro with 64GB RAM and a 9900K) only difference is a Radeon VII Graphics. I tried BIOS F10 and F9 and Mojave and Catalina. Always the same error. Also tried a standard [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] stick and different sticks. Same result. I tried to install with 4 x 16GB RAM and also with only one stick in the first slot next to CPU. My drive is a EVO 960 Samsund M.2 SSD 512GB. Thanks in advance, Ben Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695072 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 (edited) 3 minutes ago, benjiolino said: Hello Glasgood, I'm trying to install with your settings and files since 2 days and always getting following error: Forcing CS_Runtime for entitlement: com.apple.rootless.installgetexceptionlist: failed to open /private/var/db/systempolicyconfigutration/hardeningexceptions.plistcreating RAM disk for var/log I have the same hardware then you ( Z390 Aorus Pro with 64GB RAM and a 9900K) only difference is a Radeon VII Graphics. I tried BIOS F10 and F9 and Mojave and Catalina. Always the same error. Also tried a standard ##### stick and different sticks. Same result. I tried to install with 4 x 16GB RAM and also with only one stick in the first slot next to CPU. My drive is a EVO 960 Samsund M.2 SSD 512GB. Thanks in advance, Ben Hey, Try this EFI instead my friend, Z390 Pro DSDT EFI.zip Edited October 26, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695074 Share on other sites More sharing options...
benjiolino Posted October 26, 2019 Share Posted October 26, 2019 Thanks AudioGod, I tried now another USB stick and then came the error “This copy of the Install macOS Mojave.app application is damaged, and can’t be used to install macOS.” Now I downloaded a new copy and the installation is running. Let's see what happens. Originally I wanted to use my old Mojave installation which was running with a 7700k and a Z 170xp SLI but when I exchanged the EFI with the one of Glasgod I was not able to boot. always stuck at PTID Sensors Started... Can I use the USB kext from Glasgow with your EFI? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695086 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 1 hour ago, benjiolino said: Thanks AudioGod, I tried now another USB stick and then came the error “This copy of the Install macOS Mojave.app application is damaged, and can’t be used to install macOS.” Now I downloaded a new copy and the installation is running. Let's see what happens. Originally I wanted to use my old Mojave installation which was running with a 7700k and a Z 170xp SLI but when I exchanged the EFI with the one of Glasgod I was not able to boot. always stuck at PTID Sensors Started... Can I use the USB kext from Glasgow with your EFI? yes follow he’s guide but using my Efi instead Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695093 Share on other sites More sharing options...
benjiolino Posted October 26, 2019 Share Posted October 26, 2019 cool thanks. so far everything work nicely. it was running perfect until I put back the rest of the RAM and cloned it to the M.2 SSD. it boots up normally and everything works. then after 2-5 min it freezes. I'm just testing with only one RAM again. but would be a shame to not use all of the RAM. Maybe its also the M.2 but I use it since one year with Mojave. No Im waiting and see if it freezes again. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695098 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 (edited) 20 minutes ago, benjiolino said: cool thanks. so far everything work nicely. it was running perfect until I put back the rest of the RAM and cloned it to the M.2 SSD. it boots up normally and everything works. then after 2-5 min it freezes. I'm just testing with only one RAM again. but would be a shame to not use all of the RAM. Maybe its also the M.2 but I use it since one year with Mojave. No Im waiting and see if it freezes again. You should be able to use your ram no problem. in the bios don’t select the ram speed manually but instead leave it on auto and then switch on XMP. if it still isn’t working after that then use memtestx86 and run a few passes of it on your memory to see if your memory is ok. also if your m.2 is not a Samsung model it won’t be compatible so watch out for that too. p.s. make sure the memory is using slots a2 b2 as they are the main two slots if your only using two sticks of memory Edited October 26, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695100 Share on other sites More sharing options...
Bill_h4ze Posted October 26, 2019 Share Posted October 26, 2019 (edited) Hello, I'm new in this Hackintosh World... I have no Idea how to get my USB working... frontpanel is not working only USB 3.1 and USB 2.0 on the Board some Ports at the Back not working.... Please can someone explain how I get this work ? Thanks ! <3 Edited October 26, 2019 by Bill_h4ze Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695101 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 (edited) 4 minutes ago, Bill_h4ze said: Hello, I'm new in this Hackintosh World... I have no Idea how to get my USB working... frontpanel is not working only USB 3.1 and USB 2.0 on the Board some Ports at the Back not working.... use my attached EFI and try again also are you using a rx gpu or a vega? if your using a rx card then replace the dsdt in the efi with the one supplied otherwise if using a vega 56/64 or Radion VII then use the dsdt already installed in the efi. Quote CLOVER FOLDER Use this folder with fully patched DSDT Z390 Pro DSDT EFI.zip (Updated 21 July 2019) ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these extra DSDT's) If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI) DSDT.VEGA.VII.zip If your using a RX Series or Nvidia GPU then use this DSDT DSDT.RXxxx.NVIDIA.zip Edited October 26, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695103 Share on other sites More sharing options...
Bill_h4ze Posted October 26, 2019 Share Posted October 26, 2019 (edited) at this moment I use Intel GPU I order a Radeon VII but for now I use Intel And I got a z390 Wifi Pro. Edited October 26, 2019 by Bill_h4ze Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695104 Share on other sites More sharing options...
Bill_h4ze Posted October 26, 2019 Share Posted October 26, 2019 with this I got reboots after apple logo... Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695106 Share on other sites More sharing options...
benjiolino Posted October 26, 2019 Share Posted October 26, 2019 6 minutes ago, Bill_h4ze said: at this moment I use Intel GPU I order a Radeon VII but for now I use Intel And I got a z390 Wifi Pro. this is the easiest way to get USB working. Did not say it's easy... https://www.youtube.com/watch?v=j3V7szXZZTc Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695107 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 (edited) 2 minutes ago, benjiolino said: this is the easiest way to get USB working. Did not say it's easy... https://www.youtube.com/watch?v=j3V7szXZZTc the efi I gave you has native usb on all ports for the Z390 pro patched and ready so you need not do anything but put in your details and enjoy. Check my thread for more details on the EFI Quote Edited October 26, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695108 Share on other sites More sharing options...
benjiolino Posted October 26, 2019 Share Posted October 26, 2019 (edited) 21 minutes ago, AudioGod said: You should be able to use your ram no problem. in the bios don’t select the ram speed manually but instead leave it on auto and then switch on XMP. if it still isn’t working after that then use memtestx86 and run a few passes of it on your memory to see if your memory is ok. also if your m.2 is not a Samsung model it won’t be compatible so watch out for that too. p.s. make sure the memory is using slots a2 b2 as they are the main two slots if your only using two sticks of memory ok I will try MEMtest later. just tried with two sticks in a2 b2 and works perfect. only if I put 4 sticks 64gb total it gets unstable. it freezes and get some weird pixel fun around cursor. nut I used the ram until two days ago with my 7700k. really strange. also the GPU spins up and the machine gets really loud... Edited October 26, 2019 by benjiolino Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695109 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 2 minutes ago, benjiolino said: ok I will try MEMtest later. just tried with two sticks in a2 b2 and works perfect. only if I put 4 sticks 64gb total it gets unstable. it freezes and get some weird pixel fun around cursor. nut I used the ram until two days ago with my 7700k. really strange. sounds like bad memory to me buddy. Memtestx86 will revile the problem if there is one Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695110 Share on other sites More sharing options...
Bill_h4ze Posted October 26, 2019 Share Posted October 26, 2019 5 minutes ago, AudioGod said: the efi I gave you has native usb on all ports for the Z390 pro patched and ready so you need not do anything but put in your details and enjoy. Check my thread for more details on the EFI With this EFI Folder it try to boot but restart after 50% Loading I have no PCI Graphic Card... I use iGPU maybe that's why ? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695111 Share on other sites More sharing options...
AudioGod Posted October 26, 2019 Share Posted October 26, 2019 Just now, Bill_h4ze said: With this EFI Folder it try to boot but restart after 50% Loading I have no PCI Graphic Card... I use iGPU maybe that's why ? Yes that is why, my EFI is made for a vega, Radion VII or a RX GPU and not a igpu sorry Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695112 Share on other sites More sharing options...
Bill_h4ze Posted October 26, 2019 Share Posted October 26, 2019 1 hour ago, benjiolino said: this is the easiest way to get USB working. Did not say it's easy... https://www.youtube.com/watch?v=j3V7szXZZTc try it exact how he do it... but not working. USB MAP is in there. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695116 Share on other sites More sharing options...
benjiolino Posted October 27, 2019 Share Posted October 27, 2019 18 hours ago, AudioGod said: sounds like bad memory to me buddy. Memtestx86 will revile the problem if there is one So finally I tried different settings and did a Memtest86 from Usb. the hardware seams to be ok. In windows I don't have a problem and Mojave runs perfect with 2 stick 16gb each. but when I put back all 4 sticks it boots up normally but freeze within 3 minutes. also if I change the order of the sticks it the sane that's why I don't think the RAM is faulty. could it be somehow related to the installation or some Bios settings? I also thought maybe its better to take another setting then iMac Pro since the Pro iMacs use ECC memory. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695197 Share on other sites More sharing options...
lygi Posted October 27, 2019 Share Posted October 27, 2019 Hi There! Got exactly the same setup as yours. Using your EFI folder (unchanged ) Everything works great but sleep. Got immediate wake. When unplugging WIFI/BT card from MB sleep works great. Is there any fix for this? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695209 Share on other sites More sharing options...
AudioGod Posted October 27, 2019 Share Posted October 27, 2019 5 minutes ago, lygi said: Hi There! Got exactly the same setup as yours. Using your EFI folder (unchanged ) Everything works great but sleep. Got immediate wake. When unplugging WIFI/BT card from MB sleep works great. Is there any fix for this? Give these kexts a try? Its worked for some people with this problem but not everybody unfortunately. is this happening in Mojave or Catalina? BrcmFix.zip Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695212 Share on other sites More sharing options...
lygi Posted October 27, 2019 Share Posted October 27, 2019 (edited) 23 minutes ago, AudioGod said: Give these kexts a try? Its worked for some people with this problem but not everybody unfortunately. is this happening in Mojave or Catalina? BrcmFix.zip I will try it in next 10 min - yes - both systems same issue EDIT: tested those 3 kexts - still immediate wake Edited October 27, 2019 by lygi kexts tested Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/59/#findComment-2695214 Share on other sites More sharing options...
Recommended Posts