MaLd0n Posted August 25, 2019 Author Share Posted August 25, 2019 19 hours ago, CrazyTeeka said: Hi MaLd0n, 1. Please check the attached "Send Me" is correct for macOS Mojave 10.14.6. 2. On DAD's PC, have an issue with Clover booting from main drive. It loads in the theme, but then stops. I have to press a key (eg. up arrow) to make it continue and show the drives. This does not happen when booting off USB stick installer (it shows all bootable drives right away), the EFI directory on the main drive is identical in every way to the EFI on the USB stick installer which has me at a loss. Any ideas? Send me Macintosh.zip use my efi folder for ur chipset DSDT.aml.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687304 Share on other sites More sharing options...
phLi Posted August 28, 2019 Share Posted August 28, 2019 Hi MaLd0n, Hoping you can help me please? I have an HP Omen 880-160se desktop that I've been trying to Hackintosh on-and-off for some time. Specs are: i7-8700 3.2 GHz Z370 16GB DDR4 Realtek RTL8161 UHD 630 It has two GTX 1070s in SLI, but I disable them in BIOS for Hackintosh, so using UHD 630. System also has Intel Optane 8GB with 1 TB drive, but for Hackintosh I install to separate drive. Recently I’ve been able to finally get macOS Mojave installer going, and got Mojave installed. Audio is working, and I think I have UHD 630 working with WEG framebuffer properties. But I can only get it to boot into macOS maybe 5% of the time (usually hangs before login screen). And once in it’s a bit buggy, unstable, and UI is glitchy (login screen kind of on top of Finder/app windows? weird). So I haven’t been able to get in to the OS to get you RunMe output, but am attaching Clover F4 (ACPI/origin/) files, hoping you can help please? Thanks much in advance! origin.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687590 Share on other sites More sharing options...
phLi Posted August 30, 2019 Share Posted August 30, 2019 On 8/27/2019 at 8:26 PM, phLi said: Hi MaLd0n, Hoping you can help me please? I have an HP Omen 880-160se desktop that I've been trying to Hackintosh on-and-off for some time. Specs are: i7-8700 3.2 GHz Z370 16GB DDR4 Realtek RTL8161 UHD 630 It has two GTX 1070s in SLI, but I disable them in BIOS for Hackintosh, so using UHD 630. System also has Intel Optane 8GB with 1 TB drive, but for Hackintosh I install to separate drive. Recently I’ve been able to finally get macOS Mojave installer going, and got Mojave installed. Audio is working, and I think I have UHD 630 working with WEG framebuffer properties. But I can only get it to boot into macOS maybe 5% of the time (usually hangs before login screen). And once in it’s a bit buggy, unstable, and UI is glitchy (login screen kind of on top of Finder/app windows? weird). So I haven’t been able to get in to the OS to get you RunMe output, but am attaching Clover F4 (ACPI/origin/) files, hoping you can help please? Thanks much in advance! origin.zip Okay, so I stumbled across a post by someone with similar rig and using their findings I was able to get my Hack booting consistently and is stable, yay! (So I don't think DSDT/SSDT patches needed now, thanks.) But... in order to have stable boot I must first disable "multi-processor" and "hyper-threading" in BIOS. 8^P Which is obviously not ideal. Any idea if there is a clover patch, kext, or driver I can apply/use to get around this issue some other way instead of having to disable multi-processor/hyper-threading? (Also switched from iMac19,2 to iMac18,1 to get boot working, but don't think that's relevant?) Any help is appreciated! Thanks. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687910 Share on other sites More sharing options...
MaLd0n Posted August 30, 2019 Author Share Posted August 30, 2019 45 minutes ago, phLi said: Okay, so I stumbled across a post by someone with similar rig and using their findings I was able to get my Hack booting consistently and is stable, yay! (So I don't think DSDT/SSDT patches needed now, thanks.) But... in order to have stable boot I must first disable "multi-processor" and "hyper-threading" in BIOS. 8^P Which is obviously not ideal. Any idea if there is a clover patch, kext, or driver I can apply/use to get around this issue some other way instead of having to disable multi-processor/hyper-threading? (Also switched from iMac19,2 to iMac18,1 to get boot working, but don't think that's relevant?) Any help is appreciated! Thanks. DSDT.aml.zip the good idea is post one ioreg too Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687919 Share on other sites More sharing options...
phLi Posted August 30, 2019 Share Posted August 30, 2019 1 hour ago, phLi said: Okay, so I stumbled across a post by someone with similar rig and using their findings I was able to get my Hack booting consistently and is stable, yay! (So I don't think DSDT/SSDT patches needed now, thanks.) But... in order to have stable boot I must first disable "multi-processor" and "hyper-threading" in BIOS. 8^P Which is obviously not ideal. Any idea if there is a clover patch, kext, or driver I can apply/use to get around this issue some other way instead of having to disable multi-processor/hyper-threading? (Also switched from iMac19,2 to iMac18,1 to get boot working, but don't think that's relevant?) Any help is appreciated! Thanks. 17 minutes ago, MaLd0n said: DSDT.aml.zip the good idea is post one ioreg too Okay, looks like I found answer/fix - VoodooTSCSync solved! But if you think DSDT would be better, please let me know - I am attaching IOReg if that is the case. Thanks again for your help, and for the Guide! Ioreg.txt.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687925 Share on other sites More sharing options...
MaLd0n Posted August 30, 2019 Author Share Posted August 30, 2019 16 minutes ago, phLi said: Okay, looks like I found answer/fix - VoodooTSCSync solved! But if you think DSDT would be better, please let me know - I am attaching IOReg if that is the case. Thanks again for your help, and for the Guide! Ioreg.txt.zip --Run_Me RunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687926 Share on other sites More sharing options...
edenpulse Posted August 31, 2019 Share Posted August 31, 2019 hey, could you help me? Getting random KPs... My build : i7 8700K GA-Z370N-Wifi Radeon VII Here's my SendMe Thanks! Send me Mac-Pro.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2687968 Share on other sites More sharing options...
MaLd0n Posted August 31, 2019 Author Share Posted August 31, 2019 12 hours ago, edenpulse said: hey, could you help me? Getting random KPs... My build : i7 8700K GA-Z370N-Wifi Radeon VII Here's my SendMe Thanks! Send me Mac-Pro.zip sound like a com.apple.driver.AppleGFXHDA problem USE IT, REBOOT AND ENABLE INTERNALGRAPG=HICS IN BIOS TOO FOR HARDWARE ACCEL EFI.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688133 Share on other sites More sharing options...
edenpulse Posted September 1, 2019 Share Posted September 1, 2019 13 hours ago, MaLd0n said: sound like a com.apple.driver.AppleGFXHDA problem USE IT, REBOOT AND ENABLE INTERNALGRAPG=HICS IN BIOS TOO FOR HARDWARE ACCEL EFI.zip Done it, works, but still had a KP. Here's the KP log and a new SendMe.zip kp.txt Send me Mac-Pro.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688172 Share on other sites More sharing options...
MaLd0n Posted September 1, 2019 Author Share Posted September 1, 2019 5 hours ago, edenpulse said: Done it, works, but still had a KP. Here's the KP log and a new SendMe.zip kp.txt Send me Mac-Pro.zip the problem is hdmi audio from radeonb vii, AppleGFXHDA is common problem with radeon vii, check if have solution in search forum Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688204 Share on other sites More sharing options...
edenpulse Posted September 1, 2019 Share Posted September 1, 2019 3 hours ago, MaLd0n said: the problem is hdmi audio from radeonb vii, AppleGFXHDA is common problem with radeon vii, check if have solution in search forum I used AppleHDAdisabler to prevent AppleGFXHDA to load. As the patching doesn't seem to work... Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688221 Share on other sites More sharing options...
MaLd0n Posted September 2, 2019 Author Share Posted September 2, 2019 9 hours ago, edenpulse said: I used AppleHDAdisabler to prevent AppleGFXHDA to load. As the patching doesn't seem to work... Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688256 Share on other sites More sharing options...
hoangmap1992 Posted September 2, 2019 Share Posted September 2, 2019 Hi @MaLd0n I update my PC and instal Hackintosh ! Can U help me ! Please ! I run Runme.app and send my file to you ( so sorry I don't know English ) My PC : Dell Optilex 7010 MT CPU : i7 3770k Ram 16G VGA MSI RX 460 4G Thanks you so much!!! Send me iMac-cua-User.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688259 Share on other sites More sharing options...
CrazyTeeka Posted September 2, 2019 Share Posted September 2, 2019 Hi MaLd0n Please can I have a new DSDT.aml for my own PC, running macOS Mojave 10.14.6. Send Me.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688294 Share on other sites More sharing options...
MaLd0n Posted September 2, 2019 Author Share Posted September 2, 2019 11 hours ago, hoangmap1992 said: Hi @MaLd0n I update my PC and instal Hackintosh ! Can U help me ! Please ! I run Runme.app and send my file to you ( so sorry I don't know English ) My PC : Dell Optilex 7010 MT CPU : i7 3770k Ram 16G VGA MSI RX 460 4G Thanks you so much!!! Send me iMac-cua-User.zip DSDT.aml.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688303 Share on other sites More sharing options...
MaLd0n Posted September 2, 2019 Author Share Posted September 2, 2019 1 hour ago, CrazyTeeka said: Hi MaLd0n Please can I have a new DSDT.aml for my own PC, running macOS Mojave 10.14.6. Send Me.zip DSDT.aml.zip use ec0 to ec patch Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688306 Share on other sites More sharing options...
Nick7502 Posted September 5, 2019 Share Posted September 5, 2019 Using a Alienware 51m, thank you for your help! Send me Nicolass-iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688738 Share on other sites More sharing options...
MaLd0n Posted September 5, 2019 Author Share Posted September 5, 2019 9 hours ago, Nick7502 said: Using a Alienware 51m, thank you for your help! Send me Nicolass-iMac.zip EFI.zip idk if ur nvidia work, try https://olarila.com/files/Utils/nvidia-update.command.zip 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688853 Share on other sites More sharing options...
Erijian Posted September 5, 2019 Share Posted September 5, 2019 I just finished building my hackintosh build and everything was fine until I realized I couldn't shut down my pc properly. It shows "please go to https //panic.apple.com to report this panic." I used vanilla method and I followed every step, and I couldn't figure out the problem. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688855 Share on other sites More sharing options...
MaLd0n Posted September 5, 2019 Author Share Posted September 5, 2019 2 minutes ago, Erijian said: I just finished building my hackintosh build and everything was fine until I realized I couldn't shut down my pc properly. It shows "please go to https //panic.apple.com to report this panic." I used vanilla method and I followed every step, and I couldn't figure out the problem. idk what ur hardware update ur signature 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688857 Share on other sites More sharing options...
Erijian Posted September 5, 2019 Share Posted September 5, 2019 (edited) 26 minutes ago, MaLd0n said: idk what ur hardware update ur signature Spec: gigabyte z390 itx motherboard i3 3100f radeon Rx570 Edited September 5, 2019 by Erijian Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688861 Share on other sites More sharing options...
MaLd0n Posted September 5, 2019 Author Share Posted September 5, 2019 1 hour ago, Erijian said: Spec: gigabyte z390 itx motherboard i3 3100f radeon Rx570 use it CLOVER.zip extract one send_me --Run_Me RunMe.apphttps://www.youtube.com/watch?v=k9wmIfGLe3A 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688894 Share on other sites More sharing options...
Erijian Posted September 5, 2019 Share Posted September 5, 2019 Please forgive my ignorance, let me know if I understand this the right way. 1. use the clover. zip you gave me to replace my current config and kext 2. run RunMe.app And what should I send back to you? Thank you again for helping! Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688919 Share on other sites More sharing options...
MaLd0n Posted September 5, 2019 Author Share Posted September 5, 2019 32 minutes ago, Erijian said: Please forgive my ignorance, let me know if I understand this the right way. 1. use the clover. zip you gave me to replace my current config and kext 2. run RunMe.app And what should I send back to you? Thank you again for helping! 1, use my clover folder above(if need install clover again after replace full clover folder) 2, install/boot into system and run my app, post files generated in ur desktop here Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688925 Share on other sites More sharing options...
Erijian Posted September 5, 2019 Share Posted September 5, 2019 (edited) Send me Eddies-iMac.zip Here it is Edited September 5, 2019 by Erijian Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/205/#findComment-2688938 Share on other sites More sharing options...
Recommended Posts