Christian George Posted June 11, 2014 Share Posted June 11, 2014 Using the Intel rig in my signature. I got pretty much everything to work got network to work and have full acceleration with graphics now working on sound and I will be all set Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028470 Share on other sites More sharing options...
ADHDMedia Posted June 11, 2014 Share Posted June 11, 2014 I got pretty much everything to work got network to work and have full acceleration with graphics now working on sound and I will be all set Awesome! How'd you fix it? Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028471 Share on other sites More sharing options...
Christian George Posted June 11, 2014 Share Posted June 11, 2014 Awesome! How'd you fix it? Boot flash drive and go through the setup process then on one of the pages you should see customize and you uncheck your graphics card is unsupported cause it is and then install and for network I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028479 Share on other sites More sharing options...
ADHDMedia Posted June 11, 2014 Share Posted June 11, 2014 Boom. Good deal man. Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028492 Share on other sites More sharing options...
Christian George Posted June 11, 2014 Share Posted June 11, 2014 Boom. Good deal man. I'm guessing you tried it. I'm trying to get hdmi audio working and I'm not really the greatest at it. But since I installed last it's pretty stable copied over ssdt and dsdt. If someone can help me get hdmi working that would be awesome Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028497 Share on other sites More sharing options...
ADHDMedia Posted June 11, 2014 Share Posted June 11, 2014 Ya I don't know really where to start, awhile back I had someone patch my DSDT for me and it worked, but that was for an old card. I never really have to worry about audio issues because I've always used the FastTrackUSB for sound and never had an issue. Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028498 Share on other sites More sharing options...
Christian George Posted June 11, 2014 Share Posted June 11, 2014 Ya I don't know really where to start, awhile back I had someone patch my DSDT for me and it worked, but that was for an old card. I never really have to worry about audio issues because I've always used the FastTrackUSB for sound and never had an issue. Toleda is like a god when it comes to anything sound related he does an amazing job at it I will probably see if he can help me Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2028503 Share on other sites More sharing options...
Christian George Posted June 12, 2014 Share Posted June 12, 2014 Ya I don't know really where to start, awhile back I had someone patch my DSDT for me and it worked, but that was for an old card. I never really have to worry about audio issues because I've always used the FastTrackUSB for sound and never had an issue. So how is everything going for you is your system pretty stable Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2029038 Share on other sites More sharing options...
ADHDMedia Posted June 12, 2014 Share Posted June 12, 2014 Yessir! I have the Finder crash on me sometimes when I have two or more windows open... And I'm having USB 3.0 issues where my 3.0 doesn't work after sleep... I can't use FCPX yet cuz it's not compatible... All expected issues for a DP1! Loving Yosemite so far. None of the handoff features are working for me yet tho. Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2029042 Share on other sites More sharing options...
Christian George Posted June 12, 2014 Share Posted June 12, 2014 Yessir! I have the Finder crash on me sometimes when I have two or more windows open... And I'm having USB 3.0 issues where my 3.0 doesn't work after sleep... I can't use FCPX yet cuz it's not compatible... All expected issues for a DP1! Loving Yosemite so far. None of the handoff features are working for me yet tho. My system is really stable not really having a problem have not tried USB 3.0 after sleep though. I have networking working full acceleration on graphics. No sound and can't figure it out. Its a little laggy when it starts and on some applications but that is to be expected Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2029257 Share on other sites More sharing options...
ADHDMedia Posted June 13, 2014 Share Posted June 13, 2014 I fixed the USB3 with a boot flag: -gux_nosleep ..just in case you have a problem! Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2029901 Share on other sites More sharing options...
elya Posted July 10, 2014 Share Posted July 10, 2014 guys, how to install the mbr patch? i can't replace the "OSInstaller" and "OSInstall.mpkg" in installESD.dmg and BaseSystem.dmg Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2038841 Share on other sites More sharing options...
crusher Posted July 11, 2014 Share Posted July 11, 2014 Okay thanks I'll try to redo my installation key EDIT : Okay so I made another Installer. Now, Sensors seems work (I've messages in verbose boot for CPU Sensors and Radeonsensors.) I tried kext-dev-mode=1 -v and I've that : IMG_20140606_181129.jpg Then with kext-dev-mode=1 -v GraphicsEnabler=No ncpi=0x2000 USBBusFix=1 I got this : IMG_20140606_181429.jpg Any idea ? Thanks a lot You can try kext-dev-mode=1 -v -f Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2039320 Share on other sites More sharing options...
dsTny Posted July 17, 2014 Share Posted July 17, 2014 Can somebody help me, please? If I "install" AppleACPIPlatform kext with kext wizard to get battery information on my notebook, no serial number is inside about my mac anymore. How can I fix that? Thanks Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041514 Share on other sites More sharing options...
Allan Posted July 17, 2014 Share Posted July 17, 2014 Try edit Serial Number in (Clover) config.plist or if you use Chameleon, in your boot.plist. Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041520 Share on other sites More sharing options...
dsTny Posted July 17, 2014 Share Posted July 17, 2014 Hm it is defintely set. It happened after I install the AppleACPIPlatform kext.. Has somebody a working one? Thank you again Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041525 Share on other sites More sharing options...
Allan Posted July 17, 2014 Share Posted July 17, 2014 This may be a bug (Yosemite is still Beta). Some users are having this problem. but this is giving trouble? Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041541 Share on other sites More sharing options...
dsTny Posted July 18, 2014 Share Posted July 18, 2014 Thank you for your answer Thanks to this thread and the site of RehabMan I fixed that problem with a DSDT patch. So I don't need any AppleAHCPIPlatform kext anymore, only the ACPIBatteryManager kext /edit: Yes, I could not login to the App Store without serial number Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041648 Share on other sites More sharing options...
Allan Posted July 18, 2014 Share Posted July 18, 2014 You use Clover or Chameleon? Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2041708 Share on other sites More sharing options...
ishtahir Posted July 20, 2014 Share Posted July 20, 2014 I installed using MacPwn, it was the only thing that worked for my HP Envy laptop, and I installed Yosemite onto an external HD and after installation when I try to boot into the HD this is the error message that I get right before it restarts, any ideas please? Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2042132 Share on other sites More sharing options...
juliantoledo Posted August 18, 2014 Share Posted August 18, 2014 After a lot of trying I was able to boot the installer with Clover + kext-dev-mode=1 -v GraphicsEnabler=No ncpi=0x2000 USBBusFix=1 Let's see if the installation will work now UPDATE: Installation went fine, however my GTX 760 does not seem to work, I only get 1024x768 screen. I haven't play around with drivers, so I am not sure if [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] fixes audio and net. Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2052995 Share on other sites More sharing options...
whoareyou Posted August 18, 2014 Share Posted August 18, 2014 also getting the applemobiledevice error, if i boot without kext-dev-mode=1 it can boot, only if i remove AppleIntelHD5000Graphics.kext tho, or else i get a KP from AppleOSXWatchdog.kext.... Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2053016 Share on other sites More sharing options...
JorgeMDQ Posted October 12, 2014 Share Posted October 12, 2014 OS X 10.10 Yosemite (DP1) Installation Guide 1. Requirements a. Clover Bootloader - Build 2695. This is necessary for this guide. b. An 8GB or bigger USB drive c. Access to a Mac, preferably your current Hackintosh d. (Optional) A separate partition to install the DP on, as it is not recommended to install this as you daily driver. ... The Clover link informed above do a error message. can you fix it ?? Thank you! Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2068815 Share on other sites More sharing options...
liujianwei Posted October 20, 2014 Share Posted October 20, 2014 cp "/Volumes/OS X Install ESD/BaseSystem.dmg" /Volumes/Name_of_your_USB/ cp "/Volumes/OS X Install ESD/BaseSystem.chunklist" /Volumes/Name_of_your_USB/ What is this step for?Before that you have restore the "Base System". Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2072252 Share on other sites More sharing options...
yaniamac Posted October 20, 2014 Share Posted October 20, 2014 after i installed yosemite, in clover i see recover hd instead of my yosemite partition. kind of strange, installation went w/o errors. I have same problem. Anybody solve this? Link to comment https://www.insanelymac.com/forum/topic/298458-installation-guide-for-1010-dp1-usb/page/5/#findComment-2072324 Share on other sites More sharing options...
Recommended Posts