iHackintosh_PT Posted June 19, 2015 Share Posted June 19, 2015 From mine picture you can see you missed some amd files loading.... Even if you have screens black you MUST have amd kexts loaded! And then....patching connectors! Well,i don't have black screens,only white,without spinning wheel,whenever the 6000controller loads... Can you check this new boot.log ? bootlog.log.txt Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146495 Share on other sites More sharing options...
4everAnoob Posted June 19, 2015 Share Posted June 19, 2015 OK so now I think it might actually be working, because... When I boot to Mavericks installer on a known working computer (with NVidia GT240 works OOB), the installer also has tearing and glitchiness! But when installed, it works superb. So to recap, on my 8560w, when booting to Mavericks installer: - The graphics card is listed with the correct info and correct VRAM - It has much more smoothness / less glitches than if I would load it without injecting - But there is still some tearing Is this basically good to go? EDIT: WOW, IT WORKS! ABSOLUTELY AMAZING! Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146499 Share on other sites More sharing options...
Rikoshet Posted June 19, 2015 Share Posted June 19, 2015 White/black/purple does not metter, you have to patch your connectors! Do it! It's time consuming so go! But, patching connectors is useless if you have not amd kexts loaded! So again, put ioregexplorer on desktop, restart, once you are on desktop hit I (be sure you have only this file starting with I on desktop ) hut command + O to open it, hit command+ S to save a file, hit Enter to save it, then reboot without amd kext! Thus way yiu can know if all kexts are loaded.... And patch your connectors! You haven't Apple hardware so you have to do some work to getting it working! Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146500 Share on other sites More sharing options...
iHackintosh_PT Posted June 19, 2015 Share Posted June 19, 2015 White/black/purple does not metter, you have to patch your connectors! Do it! It's time consuming so go! But, patching connectors is useless if you have not amd kexts loaded! So again, put ioregexplorer on desktop, restart, once you are on desktop hit I (be sure you have only this file starting with I on desktop ) hut command + O to open it, hit command+ S to save a file, hit Enter to save it, then reboot without amd kext! Thus way yiu can know if all kexts are loaded.... And patch your connectors! You haven't Apple hardware so you have to do some work to getting it working! That iOReg trick dsnt work for me,when i reach the white screen,can't do nothing but restart... PS:Thanks for your effort anyway. Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146502 Share on other sites More sharing options...
Rikoshet Posted June 19, 2015 Share Posted June 19, 2015 That iOReg trick dsnt work for me,when i reach the white screen,can't do nothing but restart... PS:Thanks for your effort anyway. I know! Start to patching connectors k follow some guides! Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146522 Share on other sites More sharing options...
iHackintosh_PT Posted June 19, 2015 Share Posted June 19, 2015 I know! Start to patching connectors k follow some guides! I guess i need first, find whats the correct configs in Clover as well as my DSDT GPU injection.. Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146525 Share on other sites More sharing options...
Rikoshet Posted June 19, 2015 Share Posted June 19, 2015 I guess i need first, find whats the correct configs in Clover as well as my DSDT GPU injection..Correct config is mandatory! You can try deleting all signs of your GPU from DSDT and in config.plist under Graphics put ATI = Yes, read Ckover manual first! Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146532 Share on other sites More sharing options...
iHackintosh_PT Posted June 19, 2015 Share Posted June 19, 2015 Correct config is mandatory! You can try deleting all signs of your GPU from DSDT and in config.plist under Graphics put ATI = Yes, read Ckover manual first! Yeah,i Will try that. Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146533 Share on other sites More sharing options...
Leopard1993 Posted June 21, 2015 Share Posted June 21, 2015 hello i have an ati mobility hd3470 with dev id 95c4 what frame buffer i need to use? i'm on mavericks 10.9, thank you for the answer Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2146955 Share on other sites More sharing options...
Slice Posted June 22, 2015 Author Share Posted June 22, 2015 hello i have an ati mobility hd3470 with dev id 95c4 what frame buffer i need to use? i'm on mavericks 10.9, thank you for the answer See first post As I see RadeonHD3xxx was successful only in 10.5 Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2147218 Share on other sites More sharing options...
Leopard1993 Posted June 22, 2015 Share Posted June 22, 2015 As i saw some people had success even in Lion not only in 10.5 alias leopard Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2147273 Share on other sites More sharing options...
SiddRamesh Posted June 30, 2015 Share Posted June 30, 2015 After updating to OS X 10.10.4, der is some graphics glitches while startup some multi colored dots appears at the center of screen, while it switches from black screen to desktop screen ! Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2149538 Share on other sites More sharing options...
Slice Posted July 1, 2015 Author Share Posted July 1, 2015 Revert 10.9.5 will be the best solution. As i saw some people had success even in Lion not only in 10.5 alias leopard Ask them. Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2149808 Share on other sites More sharing options...
SiddRamesh Posted July 2, 2015 Share Posted July 2, 2015 Can anyone make ATI Personality for my VBios i tried but few things is hard to understand. And also i want to make a kext for my Display's EDID. DisplayVendorID-4ca3.zip Video.zip Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2150118 Share on other sites More sharing options...
Dec_Bra1n Posted August 8, 2015 Share Posted August 8, 2015 What about Switchable Graphics Intel HD3000+Redeon HD 6770M Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2158743 Share on other sites More sharing options...
vusun123 Posted August 8, 2015 Share Posted August 8, 2015 What about Switchable Graphics Intel HD3000+Redeon HD 6770M Not possible. Disable the AMD Radeon to save battery Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2158766 Share on other sites More sharing options...
ipurc Posted December 1, 2015 Share Posted December 1, 2015 hi please help my graphics ,, AMD 7610M ( HD 7500/7600 ), 6742_1002 only 4Mb graphics ,, Toshiba/Quanta BY3/BY4 Thames LE DDR3 Subsystem Vendor ID: 1002 Subsystem ID: 1002 Object Header Structure Size: 199 Connector Object Table Offset: 34 Router Object Table Offset: 0 Encoder Object Table Offset: 99 Display Path Table Offset: 12 Connector Object Id [14] which is [LVDS] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [5] which is [VGA] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x1002 IOBaseAddress: 0x4000 Filename: BR41926.007 BIOS Bootup Message: Toshiba/Quanta BY3/BY4 Thames LE DDR3 PCI ID: 1002:6742 Connector at index 0 Type [@offset 44700]: LVDS (7) Encoder [@offset 44704]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 44774]: 0x91, OSX senseid: 0x2 Connector at index 1 Type [@offset 44710]: HDMI-A (11) Encoder [@offset 44714]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 44797]: 0x90, OSX senseid: 0x1 Connector at index 2 Type [@offset 44720]: VGA (1) Encoder [@offset 44724]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 44824]: 0x92, OSX senseid: 0x3 Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2193132 Share on other sites More sharing options...
Slice Posted December 10, 2015 Author Share Posted December 10, 2015 Use FakeID=0x67401002 Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2195604 Share on other sites More sharing options...
sistoelemento Posted December 10, 2015 Share Posted December 10, 2015 Use FakeID=0x67401002 He made a new thread i think, i replied and now its working. All good. Cheers Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2195620 Share on other sites More sharing options...
ipurc Posted December 10, 2015 Share Posted December 10, 2015 Use FakeID=0x67401002 thanks for replay slice,, i was use fakeid =0x68411002 and inject CustomEDID ,, Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2195656 Share on other sites More sharing options...
Slice Posted December 10, 2015 Author Share Posted December 10, 2015 6740 is native for iMac12,2 Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2195658 Share on other sites More sharing options...
yacob841 Posted December 10, 2015 Share Posted December 10, 2015 I am having an issue with my 10.11.2 installation. I am using two Radeon 7950's which are supposed to be natively compatible with OS X and they worked that way with 10.10 perfectly fine. Ever since updating to 10.11 I am getting an error "**GPU hardware VM is enabled". I get this error twice because I have two cards and when I remove one I only get one and when I remove them both it boots up fine but only with iGPU. I am using Clover and if I use the graphics injector to inject some fake Device ID then it allows me to boot with just iGPU. I did double check and my device ID is in the AMD7000Controller.kext "679A1002" I think I have narrowed it down to the AMDRadeonX4000.kext because when I delete that it loads just fine (iGPU is normal, 7950's load but with no acceleration). My device ID is also in that kext, however I did notice that in the X4000 kext my device ID is under Tahiti which isn't one of the listed controllers in my 7000Controller. Any ideas why this might be happening? Thank you for your time and I hope to hear back from you shortly! MY motherboard is a Asus P8Z77-V Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2195790 Share on other sites More sharing options...
kingbrazile Posted December 26, 2015 Share Posted December 26, 2015 i succeed to install el capitan on my pc everything work great except my graphic card ( ati radeon hd 4650) i fixed vram now it 1024mb but i can't get QE-Ci IT work my pc restart if i checked inject ati Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2200455 Share on other sites More sharing options...
Slice Posted December 30, 2015 Author Share Posted December 30, 2015 You have two problems: 1. CloverConfigurator 2. [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. 1 Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2201761 Share on other sites More sharing options...
vusun123 Posted December 30, 2015 Share Posted December 30, 2015 You have two problems: 1. CloverConfigurator 2. #####. What wrong with Clover Configurator ? AFAIK that's the best way to get a hang of Clover before going the geek way. About that Beast thing, I have no objection, full of {censored} Link to comment https://www.insanelymac.com/forum/topic/291117-how-to-make-radeon-desktop-or-mobility-be-working-by-using-clover/page/10/#findComment-2201780 Share on other sites More sharing options...
Recommended Posts