Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30960 posts in this topic

Recommended Posts

MacKonsti
MacKonsti
Posted
Posted (edited)

Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code.

I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina.

 

Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/

 

Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover.

 

Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks!

Edited by MacKonsti
MICKHAEL
MICKHAEL
Posted
Posted (edited)
8 minutes ago, MacKonsti said:

Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code.

I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina.

 

Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/

 

Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover.

 

Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks!

hi,

AptioMemoryFix.efi are depreciated and we are moving to OcQuirks.efi
and yes, OcQuirks are not missing, already are integrated
check Dortania for Quirks settings for Coffee Lake
 

Edited by MICKHAEL
  • Like 3
PG7
PG7
Posted
Posted
1 hour ago, Jief_Machak said:

Il y a eu quelques corrections. Attendez la prochaine version ou essayez ce fichier efi :  CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip

 

 

  

Thanks Jief_Machak for the response and advice,
I followed the test with your last file but the result is:
after booting it has a black pc screen with an illuminated background but it doesn't even reach the 
Clover menu and there is no error message or kernel panic

 

in any case I thank you for your work as well as Slice among others who work for the community!

 

 

I personally prefer Clover to other Bootloaders and if I can help of course I do grateful for the efforts but spend what I know!

 

*Google Translate ! 

Jief_Machak
Jief_Machak
Posted
Posted
3 minutes ago, JorgeMax said:

 CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip

I think this is not the version you are trying. Check the debug.log.

 

Copy this https://github.com/jief666/BootloaderChooser/releases/tag/0.3 in your EFI partition in EFI/BOOT. It'll save you this headache of "where should I copy CloverX64.efi?"

  • Like 1
JorgeMax
JorgeMax
Posted
Posted (edited)
1 hour ago, Jief_Machak said:

I think this is not the version you are trying. Check the debug.log.

 

Copy this https://github.com/jief666/BootloaderChooser/releases/tag/0.3 in your EFI partition in EFI/BOOT. It'll save you this headache of "where should I copy CloverX64.efi?"

I'm using another partition with Clover in tests
I renamed your file to "CLOVERX64.efi" (EFI / CLOVER) and also as "BOOTX64.efi" (EFI / BOOT)

 

I put your "bootLoaderChooser"
Good news is that the DSDT has been loaded again:

Spoiler

799868169_CapturadeTela2020-10-17s20_49_41.thumb.png.7a297475faf2993d97452d610b3ee122.png

 

The bad that my processor is not recognized:

Spoiler

1809934924_CapturadeTela2020-10-17s20_50_17.thumb.png.593a2a9922f609d6c96fe7728e1e4e5f.png

 

White debug file

Thank you @Jief_Machak

Edited by JorgeMax
PG7
PG7
Posted
Posted
27 minutes ago, Jief_Machak said:

@ PG7Activer le débogage est la section Boot. Vous devriez avoir un debug.log dans le dossier misc. Envoie le moi.

 

Debug is empty I don't know why

 

as i said with this file i don't have any graphical interface just stay with black screen!

 

anything else you can test just let me know that I test.

I oblige your spouse to help

 

 

debug.log

  • Like 1
Slice
Slice
Posted
Posted
5 hours ago, MacKonsti said:

Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code.

I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina.

 

Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/

 

Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover.

 

Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks!

Release package is not good yet. It must be revised.

OcQuirks.efi is no more used.

AptioMemoryFix.efi is blocked even if you manually placed it.

OpenRuntime.efi must be present.

  • Like 1
  • Thanks 2
naiclub
naiclub
Posted
Posted (edited)
9 hours ago, PG7 said:

 

first of all i will leave my thoughts to a friend who left and left us and to his friends and family .....

 

  


RIP ArturPT you will always be with us the longing you will feel but the 
Hackintosh community will never NUCA forget you .... ever ..... 
Artur Manuel Marques Simoes (ArturPT)

  


I have the same problem that my HP Envy Recline 23-K030EF i5-4590T does not load the DSDT 
with both the Clover r5124 and r5125 already with the r5123 it loads without any problems! 
still without being able to boot directly from the disk where the Beta10 system is but it can be done by Preboot, 
something has improved so far I could not install it directly on any BigSur version now I can still do it 
with trapeze but without having to go through on another pc!

 

  


I leave the debug so that the DEVs with time can check and make corrections or advise me something to 
test I will be here for that!
Thank you all in advance!

 

*google translate

  Hide contents

screenshot0.thumb.png.0eb868e229561caccbfa3e35a56cc4cb.png

 

  Hide contents

screenshot1.thumb.png.8d551a10052cae4f49123940499a7dd8.png

 

 

 

 

debug.log

preboot.log

It is the same with me

 

7 hours ago, MICKHAEL said:

hi,

AptioMemoryFix.efi are depreciated and we are moving to OcQuirks.efi
and yes, OcQuirks are not missing, already are integrated
check Dortania for Quirks settings for Coffee Lake
 

This new version of Clover Can you use it completely?

There is still more recent than me.Clover_r5125.pkg

Edited by naiclub
  • Sad 1
rramon
rramon
Posted
Posted

@Sphinx777

 

Would you please share your working EFI folder for your Z370N Wifi unit?

 

Also, if I understand correctly one must install r5125 files manually. How did you do this exactly? I would use Pacifist for that and swap files one at a time.

 

Thanks in advance!

kushwavez
kushwavez
Posted
Posted
3 minutes ago, rramon said:

@Sphinx777

 

Would you please share your working EFI folder for your Z370N Wifi unit?

 

Also, if I understand correctly one must install r5125 files manually. How did you do this exactly? I would use Pacifist for that and swap files one at a time.

 

Thanks in advance!

Use the zip

Jief_Machak
Jief_Machak
Posted
Posted

For people with debug.log not generated (Sorry I'm struggling on this one!), try this : CloverX64-259ebbb-jief.zip

 

Also, I'd like to share a tool I've just made : CloverConfigPlistValidator0.2

A lot of problem happens when you think you change something in config.plist, but you don't know it's silently ignored by Clover.

Use a terminal, launch "CloverConfigPlistValidator0.2 {path to a config.plist}". For "{path to a config.plist}", you can just drag and drop from finder.

It's brand new. It's possible that an error or warning is wrongly reported. Let me know.

  • Like 3
  • Thanks 1
  • Haha 1
Guest
Guest
Posted
Posted
4 minutes ago, Jief_Machak said:

For people with debug.log not generated (Sorry I'm struggling on this one!), try this : CloverX64-259ebbb-jief.zip

 

Also, I'd like to share a tool I've just made : CloverConfigPlistValidator0.2

A lot of problem happens when you think you change something in config.plist, but you don't know it's silently ignored by Clover.

Use a terminal, launch "CloverConfigPlistValidator0.2 {path to a config.plist}". For "{path to a config.plist}", you can just drag and drop from finder.

It's brand new. It's possible that an error or warning is wrongly reported. Let me know. 

fabios-iMac-Pro:~ fabio$ /Users/fabio/Downloads/CloverConfigPlistValidator0.2 /Volumes/EFI/EFI/CLOVER/config.plist 
-bash: /Users/fabio/Downloads/CloverConfigPlistValidator0.2: Permission denied
fabios-iMac-Pro:~ fabio$ sudo /Users/fabio/Downloads/CloverConfigPlistValidator0.2 /Volumes/EFI/EFI/CLOVER/config.plist 
Password:
sudo: /Users/fabio/Downloads/CloverConfigPlistValidator0.2: command not found
fabios-iMac-Pro:~ fabio$

 

Guest
Guest
Posted
Posted 
/Users/fabio/Downloads/CloverConfigPlistValidator0.2 /Volumes/EFI/EFI/CLOVER/config.plist 
Warning: Unknow key 'main/ACPI/DropTables[3]/DropForAllOS:129'. Skipped.
Error: Unexpected char '/' at line 466 col 6 while looking for closing char '>'

fabios-iMac-Pro:~ fabio$

 

2 minutes ago, Jief_Machak said:

chmod a+x /Users/fabio/Downloads/CloverConfigPlistValidator0.2

 

 

jsl2000
jsl2000
Posted
Posted
8 minutes ago, fabiosun said: 

/Users/fabio/Downloads/CloverConfigPlistValidator0.2 /Volumes/EFI/EFI/CLOVER/config.plist 
Warning: Unknow key 'main/ACPI/DropTables[3]/DropForAllOS:129'. Skipped.
Error: Unexpected char '/' at line 466 col 6 while looking for closing char '>'

fabios-iMac-Pro:~ fabio$

 

 

I got exactly the same errors as yours.

maclinuxG4
maclinuxG4
Posted
Posted (edited)

sudo ./CloveerConfigPlistValidation2.0 /Volumes/EFI/EFI/config.plist

 

if no sudo  i get permission denied

 

Warning: Unknow key 'main/ACPI/DropTables[2]/Length:54'. Skipped. ---> SSDT is present in my config, but not in the file config.plist
Warning: Unknow key 'main/GUI/Mouse/DoubleClick:299'. Skipped.     -->  OK
Error: Expecting a <string> tag following key 'main/Devices/Properties' at line 635 col 5 --> clover configurator do number then data again OK
Warning: Unknow key 'main/KernelAndKextPatches/KextsToPatch[0]/FindMask:743'. Skipped. --> OK
Error: Unexpected char 'w' at line 796 col 12 while looking for closing char '>'  - not correct because FF 00 00 is in base 64    this:      /wAA  ->rong error

Edited by maclinuxG4
  • Haha 1
 Share
Go to topic listing
×
×
  • Create New...