Clover General discussion

chris1111 · July 20, 2020

Wokrs here boot CATA and BS SSD successful

Not boot BS Installer USB stuck at Still waiting for root device :lol:

Compilling by me R5120 Great Job @Slice

Attaching bdmesg

Résultat bdmesg.TXT.zip

On 7/20/2020 at 3:08 PM, Slice said:

It is correct. Clover is not ready for BigSur.

Boot success BS here

Edited July 20, 2020 by chris1111

MICKHAEL · July 20, 2020

7 minutes ago, chris1111 said:

Boot success BS here

hi Chris,
I would also like to check yours binary. could you share?

Edited July 20, 2020 by MICKHAEL

chris1111 · July 20, 2020

8 minutes ago, MICKHAEL said:

hi Chris,
I would also like to check yours binary. could you share?

Attaching my EFI for my HP ProDesk 600 G1

Graphics ASUS GeForce GT 710

EFI.zip

My Quirks setup

Edited July 20, 2020 by chris1111

Matgen84 · July 20, 2020

22 minutes ago, chris1111 said:

Boot success BS here

You succeed from SSD, I suppose. Dont' try to boot BS from HDD.

All of my USB installer tests or booting from USB don't work like you. Isn't it !

chris1111 · July 20, 2020

1 minute ago, Matgen84 said:

You succeed from SSD, I suppose. Dont' try to boot BS from HDD.

All of my USB installer tests or booting from USB don't work like you. Isn't it !

USB BS Installer create Install media not work

I am not test HD

Woks on BS SSD already installed

MICKHAEL · July 20, 2020

4 minutes ago, chris1111 said:

USB BS Installer create Install media not work

I am not test HD

Woks on BS SSD already installed

I think Matgen84 are about booting from already installed system on SSD, connected over SATA or USB

chris1111 · July 20, 2020

1 minute ago, MICKHAEL said:

I think Matgen84 are about booting from already installed system on SSD, connected over SATA or USB

I am booting from already installed system on SSD connect to SATA

Dragster27 · July 20, 2020

29 minutes ago, Matgen84 said:

You succeed from SSD, I suppose. Dont' try to boot BS from HDD.

All of my USB installer tests or booting from USB don't work like you. Isn't it !

Yep, tried to boot from installed BS in internal SATA HD in my Haswell laptop.. I got a kernel panic..

Matgen84 · July 20, 2020

Hi @Slice

All test on Z390 Aorus Master config

Commit 33816ae:

Can't boot Installer Big Sur and Installed Big Sur on HDD---> stuck at IOUSBHostInterface followed by crossed out circle

In verbose mode, I saw kexts that do not load correctly, as well as errors with my custom DSDT and SSDT

debug.log

Edited July 20, 2020 by Matgen84

vector sigma · July 20, 2020

Hi @Slice, time to try with Big Sur. The installer boots but panic on AppleIntelCPUPowerManagement.kext, I guess xcpm doesn't work.. going to try patching it.

iCanaro · July 20, 2020

This new version of Clover 5120 successfully starts all macOS of the Z97 and Z370
instead the bigsur installed on the Z370, does not start; you can clearly see from the verbose that kexts are not loaded, then at some point appear the infamous purple and end lines of the games

the version 5119 mod instead continues to start properly bigsur

https://www.hackintosh-forum.de/forum/thread/49311-macos-11-bigsur-dev-beta-clover-patch/?postID=619527#post619527

Slice · July 20, 2020

2 hours ago, vector sigma said:

Hi @Slice, time to try with Big Sur. The installer boots but panic on AppleIntelCPUPowerManagement.kext, I guess xcpm doesn't work.. going to try patching it.

Looks like kernel patching is working but kext patching no.

tasco0x0B · July 21, 2020

Hello, as I saw on Clover R5120, there are some files released. What is the brief explanation between Clover-5120-X64,Clover.app, CloverV2-5120 and Clover_r5120.pkg? Are they different between Clover and CloverV2?

Slice · July 21, 2020

There are packages with the same contents but for different installation methods.

Old method assumed that you download only Clover_r5120.pkg and start it.

Other method is for Windows Bootdisk Utility You have to download the utility and start it under Windows. The the utility will download *.iso.7z and use it to create a bootable stick.

New method is using Clover.app Clover.app testing . you have to download Clover.app_v1.24.pkg and start the installation.

This application will download CloverV2-5120.zip.

And there is a single file which can be installed manually CLOVERX64.efi.zip if you already have older Clover installed.

Matgen84 · July 21, 2020

Hi @Slice

Can't build latest r5120 commit dddceaa

Building ... /Users/mathieu/src/Cloverbootloader/CloverEFI/OsxPciBusNoEnumerationDxe/PciBusNoEnumeration.inf [X64]
1 error generated.
1 error generated.
make: Nothing to be done for `tbuild'.
Building ... /Users/mathieu/src/Cloverbootloader/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf [X64]
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib/OUTPUT/OcAppleBootPolicyLib.obj] Error 1
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib/OUTPUT/OcAppleKeyMapLib.obj] Error 1

build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib]

build.py...
 : error F002: Failed to build module
	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

Edited July 21, 2020 by Matgen84

tasco0x0B · July 21, 2020

3 hours ago, Slice said:

There are packages with the same contents but for different installation methods.

Old method assumed that you download only Clover_r5120.pkg and start it.

Other method is for Windows Bootdisk Utility You have to download the utility and start it under Windows. The the utility will download *.iso.7z and use it to create a bootable stick.

New method is using Clover.app Clover.app testing . you have to download Clover.app_v1.24.pkg and start the installation.

This application will download CloverV2-5120.zip.

And there is a single file which can be installed manually CLOVERX64.efi.zip if you already have older Clover installed.

That's enlighten me.

Slice · July 21, 2020

1 hour ago, Matgen84 said:

Hi @Slice

Can't build latest r5120 commit dddceaa


Building ... /Users/mathieu/src/Cloverbootloader/CloverEFI/OsxPciBusNoEnumerationDxe/PciBusNoEnumeration.inf [X64]
1 error generated.
1 error generated.
make: Nothing to be done for `tbuild'.
Building ... /Users/mathieu/src/Cloverbootloader/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf [X64]
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib/OUTPUT/OcAppleBootPolicyLib.obj] Error 1
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib/OUTPUT/OcAppleKeyMapLib.obj] Error 1

build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib]

build.py...
 : error F002: Failed to build module
	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

Show please previous lines as I see no errors.

Matgen84 · July 21, 2020

1 hour ago, Slice said:

Show please previous lines as I see no errors.

@Slice I can't build r5120 commit 69e0e0327 , too: with

build.py...
 : error 7000: Failed to execute command

Build log file attached

Clover_Build.log

droples · July 21, 2020

cpu.jpg.3fe3fbf91805d2b22a78bc2fae09459a.jpg

Badruzeus · July 21, 2020

7 hours ago, Matgen84 said:

Hi @Slice

Can't build latest r5120 commit dddceaa


Building ... /Users/mathieu/src/Cloverbootloader/CloverEFI/OsxPciBusNoEnumerationDxe/PciBusNoEnumeration.inf [X64]
1 error generated.
1 error generated.
make: Nothing to be done for `tbuild'.
Building ... /Users/mathieu/src/Cloverbootloader/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf [X64]
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib/OUTPUT/OcAppleBootPolicyLib.obj] Error 1
make: *** [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib/OUTPUT/OcAppleKeyMapLib.obj] Error 1

build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/mathieu/src/Cloverbootloader/Build/Clover/RELEASE_XCODE8/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib]

build.py...
 : error F002: Failed to build module
	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

	/Users/mathieu/src/Cloverbootloader/Library/OcAppleKeyMapLib/OcAppleKeyMapLib.inf [X64, XCODE8, RELEASE]

Hmmb, but I'm having different build error with GCC. This is from "Clover r5120 (SHA: 69e0e0327)":

Spoiler

Building ... /home/badruzeus/src/CloverBootloader/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf [X64]
In file included from /home/badruzeus/src/CloverBootloader/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib.c:15:
/home/badruzeus/src/CloverBootloader/Include/AppleMacEfi.h:16:10: fatal error: AppleCpuType.h: No such file or directory
16 | #include <AppleCpuType.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
make: *** [GNUmakefile:359: /home/badruzeus/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib/OUTPUT/OcAppleBootPolicyLib.obj] Error 1

build.py...
: error 7000: Failed to execute command
make tbuild [/home/badruzeus/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib]

build.py...
: error 7000: Failed to execute command
make tbuild [/home/badruzeus/src/CloverBootloader/Build/Clover/RELEASE_GCC53/X64/Library/OcAppleKeyMapLib/OcAppleKeyMapLib]

build.py...
: error F002: Failed to build module
/home/badruzeus/src/CloverBootloader/Library/OcAppleBootPolicyLib/OcAppleBootPolicyLib.inf [X64, GCC53, RELEASE]

- Failed -
Build end time: 21:13:51, Jul.21 2020
Build total time: 00:01:02

badruzeus@AO-HAPPY:~/src/CloverBootloader$

Slice · July 21, 2020

Fixed

pkdesign · July 21, 2020

I'm a it confused about OcQuirks plist, etc.

I updated to 5120, configured the Clover config plist with the same OcQuirks as I have been using before with OcQuirks.plist. Then I deleted the OcQuirks.plist and restarted.

I never got past Clover boot screen. I would always get the prohibitory symbol no matter how many time I restarted.

So I deleted the OcQuirks entries from the Clover plist and replaced the original OcQuirk plist into the drivers folder from a back up and I am now able to boot.

Slice · July 21, 2020

1 hour ago, pkdesign said:

I'm a it confused about OcQuirks plist, etc.

I updated to 5120, configured the Clover config plist with the same OcQuirks as I have been using before with OcQuirks.plist. Then I deleted the OcQuirks.plist and restarted.

I never got past Clover boot screen. I would always get the prohibitory symbol no matter how many time I restarted.

So I deleted the OcQuirks entries from the Clover plist and replaced the original OcQuirk plist into the drivers folder from a back up and I am now able to boot.

It looks like you didn't replace OcQuirks.efi to the version provided with Clover 5120.

New version size is 43392 bytes.

lucke · July 21, 2020

Hi at all, now with 5120 I able to boot to 10.15.6, but...

with only KernelXCPM=true => XCPM not enabled,

with new bootstrap entry in KerneltoPatch =>XCPM ok

found new patch to replace in Kernel:

Find: 8D43C43C 427722

Rep.: 8D43C13C 227722

On 5119 version, no problem of active XCPM using only KernelXCPM=true

Thanks for your work!

Edited July 21, 2020 by lucke

pkdesign · July 22, 2020

On 7/21/2020 at 2:29 PM, Slice said:

It looks like you didn't replace OcQuirks.efi to the version provided with Clover 5120.

New version size is 43392 bytes.

Okay, didn’t know I had to.

So in the future, you can’t update to a new version unless it is bundled with the Clover installer? I am currently using v23 provided on the Reddest Dream GitHub.

EDIT:

I reinstalled Clover including the OcQuirks.efi from installer. I still cannot boot.

This is my OcQuirk.plist:

<dict>
	<key>AvoidRuntimeDefrag</key>
	<true/>
	<key>DevirtualiseMmio</key>
	<true/>
	<key>DisableSingleUser</key>
	<false/>
	<key>DisableVariableWrite</key>
	<false/>
	<key>DiscardHibernateMap</key>
	<false/>
	<key>EnableSafeModeSlide</key>
	<true/>
	<key>EnableWriteUnprotector</key>
	<true/>
	<key>ForceExitBootServices</key>
	<false/>
	<key>MmioWhitelist</key>
	<array/>
	<key>ProtectMemoryRegions</key>
	<false/>
	<key>ProtectSecureBoot</key>
	<false/>
	<key>ProtectUefiServices</key>
	<true/>
	<key>ProvideConsoleGopEnable</key>
	<true/>
	<key>ProvideCustomSlide</key>
	<true/>
	<key>ProvideMaxSlide</key>
	<integer>0</integer>
	<key>RebuildAppleMemoryMap</key>
	<true/>
	<key>SetupVirtualMap</key>
	<false/>
	<key>SignalAppleOS</key>
	<false/>
	<key>SyncRuntimePermissions</key>
	<true/>
</dict>

And this is Quirks section from Clover plist:

	<key>Quirks</key>
	<dict>
		<key>ProtectUefiServices</key>
		<true/>
		<key>RebuildAppleMemoryMap</key>
		<true/>
		<key>EnableSafeModeSlide</key>
		<true/>
		<key>ProvideMaxSlide</key>
		<integer>0</integer>
		<key>SyncRuntimePermissions</key>
		<true/>
		<key>DevirtualiseMmio</key>
		<true/>
		<key>ProvideCustomSlide</key>
		<true/>
		<key>AvoidRuntimeDefrag</key>
		<true/>
		<key>ProvideConsoleGopEnable</key>
		<true/>
		<key>EnableWriteUnprotector</key>
		<true/>
	</dict>

Edited July 22, 2020 by pkdesign

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites