Clover General discussion

[Slice]

I can't test so why I made mistakes.

Please 4874.

[Andres ZeroCross]

13 minutes ago, Badruzeus said:

Sorry @Slice can you provide prebuilt Clover binaries?

 

 

  Reveal hidden contents

 

 

 

 

 

I can't built it,, always failed with Clobber (it works until r4871) 

Can you upload prebuilt ones r4874  @Badruzeus ???

Edited February 7, 2019 by Andres ZeroCross

[arsradu]

@Badruzeus in case you need a build for testing, here's 4874. I don't really need it for myself. Just built it for you guys so you can test.

 

Edit: removed attachment since it might have been broken.

 

Edited February 7, 2019 by arsradu

[Andres ZeroCross]

Just now, arsradu said:

@Badruzeus in case you need a build for testing, here's 4874. I don't really need it for myself. Just built it for you guys so you can test.

 

Clover_v2.4k_r4874.pkg

Thanks, i will report ASAP

[Andres ZeroCross]

Nope, still broken. I immediately press enter in Windows partiton before sound finish playing. And jf i reboot to mac (without shutdown, then my Hackintosh wont get any audio device except HDMI Ones

 

Sent from my Mi Note 2 using Tapatalk

 

 

 

 

[Andres ZeroCross]

But wait,, it looks i make some mistake. It still boot from r4871. Please wait

14 minutes ago, arsradu said:

@Badruzeus in case you need a build for testing, here's 4874. I don't really need it for myself. Just built it for you guys so you can test.

 

Clover_v2.4k_r4874.pkg

It's look your pkg can't be opened by Pacifist??? And when i install it,, Last modified of Cloverx64.efi is not change. Can you check it again?

[arsradu]

4 minutes ago, Andres ZeroCross said:

But wait,, it looks i make some mistake. It still boot from r4871. Please wait

It's look your pkg can't be opened by Pacifist??? And when i install it,, Last modified of Cloverx64.efi is not change. Can you check it again?

 

It installed just fine on my side. But after reboot, indeed it says last booted version 4871.

 

I'll build again, this time by deleting and rebuilding the entire work environment, rather than just upgrading from the previous version.

 

I'll let you know when done.

[Andres ZeroCross]

 
It installed just fine on my side. But after reboot, indeed it says last booted version 4871.
 
I'll build again, this time by deleting and rebuilding the entire work environment, rather than just upgrading from the previous version.
 
I'll let you know when done.

Installing is fine, but last modified date/time of CloverX64.efi is not change. It should be change according time when i install it right now

Sent from my Mi Note 2 using Tapatalk

[arsradu]

1 minute ago, Andres ZeroCross said:

Installing is fine, but last modified date/time of CloverX64.efi is not change. It should be change according time when i install it right now

Sent from my Mi Note 2 using Tapatalk
 

 

Yeah, I've noticed that, too. I'm rebuilding it as we speak. Also, I removed the attachment from the original post, since it seems there was something wrong with it.

[arsradu]

Oook. So we've got a few issues with this build:

Active Platform          = /Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/AptioFixPkg.dsc
Processing meta-data .
build.py...
/Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/Platform/AptioMemoryFix/AptioMemoryFix.inf(80): error 4000: Value of Guid [gAppleTrbSecureVariableGuid] is not found under [Guids] section in
/Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/AptioFixPkg.dec
/Users/jimmy/src/EXT_PACKAGES/EfiPkg/EfiPkg.dec
/Users/jimmy/src/UDK2018/IntelFrameworkPkg/IntelFrameworkPkg.dec
/Users/jimmy/src/UDK2018/MdeModulePkg/MdeModulePkg.dec
/Users/jimmy/src/UDK2018/MdePkg/MdePkg.dec
/Users/jimmy/src/UDK2018/UefiCpuPkg/UefiCpuPkg.dec

- Failed -
Build end time: 16:49:16, Feb.07 2019
Build total time: 00:00:02

Also this:

  -------------------------------
  Building Clover Install Package
  -------------------------------
====================== Preinstall ======================
[BUILD] Pre
===================== Installation =====================
[BUILD] UEFI.only
================== Target ESP ==========================
[BUILD] Target.ESP
=================== BiosBoot ===========================
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot0af'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot0ss'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1f32'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1f32alt'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1h'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1h2'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1x'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1xalt'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Description.txt'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Installation.txt'
ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Installation.txt'
[BUILD] BiosBoot

Interestingly enough, the build completes successfully.

Edited February 7, 2019 by arsradu

[Andres ZeroCross]

Oook. So we've got a few issues with this build:

Active Platform          = /Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/AptioFixPkg.dscProcessing meta-data .build.py.../Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/Platform/AptioMemoryFix/AptioMemoryFix.inf(80): error 4000: Value of Guid [gAppleTrbSecureVariableGuid] is not found under [Guids] section in/Users/jimmy/src/EXT_PACKAGES/AptioFixPkg/AptioFixPkg.dec/Users/jimmy/src/EXT_PACKAGES/EfiPkg/EfiPkg.dec/Users/jimmy/src/UDK2018/IntelFrameworkPkg/IntelFrameworkPkg.dec/Users/jimmy/src/UDK2018/MdeModulePkg/MdeModulePkg.dec/Users/jimmy/src/UDK2018/MdePkg/MdePkg.dec/Users/jimmy/src/UDK2018/UefiCpuPkg/UefiCpuPkg.dec- Failed -Build end time: 16:49:16, Feb.07 2019Build total time: 00:00:02

Also this:

  -------------------------------  Building Clover Install Package  -------------------------------====================== Preinstall ======================[bUILD] Pre===================== Installation =====================[bUILD] UEFI.only================== Target ESP ==========================[bUILD] Target.ESP=================== BiosBoot ===========================ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot0af'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot0ss'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1f32'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1f32alt'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1h'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1h2'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1x'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/boot1xalt'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Description.txt'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Installation.txt'ditto: can't get real path for source '/Users/jimmy/src/UDK2018/Clover/CloverPackage/CloverV2/BootSectors/Installation.txt'[bUILD] BiosBoot

Interestingly enough, the build completes successfully.

Then it's the reason Pacifist.app can't extract your pkg

Sent from my Mi Note 2 using Tapatalk

[arsradu]

Just now, Andres ZeroCross said:

Then it's the reason Pacifist.app can't extract your pkg

Sent from my Mi Note 2 using Tapatalk

 

It's gotta be.  So...I guess we might need to wait for a fix then.  

 

Sorry. I really wanted to help. I didn't expect the build to fail, especially since there is nothing different in the way I'm building Clover. And I didn't have any issues building older versions. So I think there might be something different in the sources, maybe a bug introduced by the latest changes...? I don't know. I guess we'll have to wait and see.

[Andres ZeroCross]

 
It's gotta be.  So...I guess we might need to wait for a fix then.  
 
Sorry. I really wanted to help. I didn't expect the build to fail, especially since there is nothing different in the way I'm building Clover. And I didn't have any issues building older versions. So I think there might be something different in the sources, maybe a bug introduced by the latest changes...? I don't know. I guess we'll have to wait and see.

Yes, you're right.

For temporary solution, i just need soundplayback is finish playing in GUI CLOVER, before boot to windows

Sent from my Mi Note 2 using Tapatalk

[SavageAUS]

Can anyone please provide binaries for latest working clover. I get stuck at random seed +++++++++++++++++ when booting.

I can access EFI from windows to replace files.

[Andres ZeroCross]

1 minute ago, SavageAUS said:

Can anyone please provide binaries for latest working clover. I get stuck at random seed +++++++++++++++++ when booting.

I can access EFI from windows to replace files.

Stuck at random seed can be caused by Mixed AudioDxe-64.efi from Clover with BootChimeDxe.efi from GoldFish64.

You shouldn't mixed both files

[SavageAUS]

Stuck at random seed can be caused by Mixed AudioDxe-64.efi from Clover with BootChimeDxe.efi from GoldFish64.

You shouldn't mixed both files

I don’t use a mix.
All I did was update clover with build_clover.command and reboot.
So all I need is the clover binaries.


Sent from my iPhone using Tapatalk

[Slice]

Compiled 4874 without problems

 

CLOVERX64.efi.zip

[Andres ZeroCross]

49 minutes ago, Slice said:

Compiled 4874 without problems
 
CLOVERX64.efi.zip

Thanks slice, i can confirm it works . I press enter in Windows Entry before sound finish playing and no problem with Audio Controller in windows

Sent from my Mi Note 2 using Tapatalk
 

Edited February 8, 2019 by Andres ZeroCross

[arsradu]

3 hours ago, Slice said:

Compiled 4874 without problems

 

CLOVERX64.efi.zip

 

Hi Slice! Well, this is interesting. Did you build it in Mojave with Xcode 10?

 

Any idea what could cause those errors I've mentioned before? I'm working on a clean environment, and I'm using this command to build:

 

./ebuild.sh --ext-co -fr

I tried going back a few revisions (always removing and redownloading the sources) and tried to compile each one of them. I've got the exact same errors up until 4870. And at 4869 I get the infamous error 65 we've had before, and it doesn't create the build. So...I'm not sure what could cause this issue. Also, I'm curious if you're also building in Mojave, or if you're still on High Sierra. Cause that might make a difference.

Edited February 8, 2019 by arsradu

[Matgen84]

5 hours ago, Slice said:

Compiled 4874 without problems

 

CLOVERX64.efi.zip

 

(Mojave, Xcode 10): I can build r4874 PKG.

 

EDIT: Before I can't because some commits in AptioFixPKG 

build.py...
/Users/mathieu/src/EXT_PACKAGES/AptioFixPkg/Application/CleanNvram/CleanNvram.inf(48): error 4000: Value of Guid [gAppleTrbSecureVariableGuid] is not found under [Guids] section in
	/Users/mathieu/src/EXT_PACKAGES/AptioFixPkg/AptioFixPkg.dec
	/Users/mathieu/src/EXT_PACKAGES/EfiPkg/EfiPkg.dec
	/Users/mathieu/src/UDK2018/MdePkg/MdePkg.dec
	/Users/mathieu/src/UDK2018/MdeModulePkg/MdeModulePkg.dec
	/Users/mathieu/src/UDK2018/UefiCpuPkg/UefiCpuPkg.dec
 

- Failed -

 

Clover_Build.log

Edited February 8, 2019 by Matgen84

[Slice]

3 hours ago, arsradu said:

 

Hi Slice! Well, this is interesting. Did you build it in Mojave with Xcode 10?

 

Any idea what could cause those errors I've mentioned before? I'm working on a clean environment, and I'm using this command to build:

 

./ebuild.sh --ext-co -fr

I tried going back a few revisions (always removing and redownloading the sources) and tried to compile each one of them. I've got the exact same errors up until 4870. And at 4869 I get the infamous error 65 we've had before, and it doesn't create the build. So...I'm not sure what could cause this issue. Also, I'm curious if you're also building in Mojave, or if you're still on High Sierra. Cause that might make a difference.

I built in 10.13.6 with Xcode10.1.

But I think your issue is "--ext-co"

[arsradu]

50 minutes ago, Slice said:

I built in 10.13.6 with Xcode10.1.

But I think your issue is "--ext-co"

 

You are 100% correct. It's not the OS, nor it is the Xcode version (since we're both using the exact same version). It was indeed compiling external drivers. Not sure what happened there. But  "--ext-co" doesn't seem to work anymore.

 

Anyway, simple fix: switched to "--ext-pre" instead.

 

Done. Thank you!  

Edited February 8, 2019 by arsradu

[Andres ZeroCross]

 
You are 100% correct. It's not the OS, nor it is the Xcode version (since we're both using the exact same version). It was indeed compiling external drivers. Not sure what happened there. But  "--ext-co" doesn't seem to work anymore.
 
Anyway, simple fix: switched to "--ext-pre" instead.
 
Done. Thank you!  

I used clobber, and it works now

Sent from my Mi Note 2 using Tapatalk

[Matgen84]

1 hour ago, arsradu said:

 

You are 100% correct. It's not the OS, nor it is the Xcode version (since we're both using the exact same version). It was indeed compiling external drivers. Not sure what happened there. But  "--ext-co" doesn't seem to work anymore.

 

Anyway, simple fix: switched to "--ext-pre" instead.

 

Done. Thank you!  

 

Hi @arsradu

 

"--ext-co" works fine on my system: Mojave 10.14.3/ Xcode 10.1.

@Andres ZeroCross, I don't use clobber for now. Where I can find it, please.

[arsradu]

10 minutes ago, Matgen84 said:

 

Hi @arsradu

 

"--ext-co" works fine on my system: Mojave 10.14.3/ Xcode 10.1.

@Andres ZeroCross, I don't use clobber for now. Where I can find it, please.

 

But but...you said you couldn't build either. With the exact same error I've got.... Did you remove and redownload the build environment between the two tries? I find it really weird that you don't get that error anymore.

 

Also, here's clobber.