sqalg Posted September 11, 2010 Share Posted September 11, 2010 Did you test it or are you just reading the release notes? I just read the release note . Could you test ? Link to comment Share on other sites More sharing options...
Diwad Posted September 11, 2010 Share Posted September 11, 2010 My display is sleeping. What can be a solution guys? Link to comment Share on other sites More sharing options...
dewberry Posted September 11, 2010 Share Posted September 11, 2010 I've got Palit GeForce GTX 480 Display: Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 64 MB Vendor: NVIDIA (0x10de) Device ID: 0x06c0 Revision ID: 0x00a3 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes I've tried topic solutions and get blank screen. I've tried GFX EFI strings - Fermi doesn't detected as well (VRAM (Total): 64 MB and 1024x768 Screen Mode Only). Would you like to help please? EVEREST Info: Field Value Device Properties Device Description NVIDIA GeForce GTX 480 [10DE-06C0] [NoDB] Bus Type PCI Express 2.0 x16 Bus / Device / Function 1 / 0 / 0 Device ID 10DE-06C0 Subsystem ID 10DE-075F Device Class 0300 (VGA Display Controller) Revision A3 Fast Back-to-Back Transactions Not Supported Device Features 66 MHz Operation Not Supported Bus Mastering Enabled Link to comment Share on other sites More sharing options...
cmf Posted September 11, 2010 Author Share Posted September 11, 2010 hey cmf sorry for a maybe silly questiona does this new nvidia driver support gtx480 ? no, it's a R256 based driver and also uses the new nvdaresman/iondrv/... kexts -> new nvdagf100hal.kext is needed. Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 64 MB Vendor: NVIDIA (0x10de) Device ID: 0x06c0 Revision ID: 0x00a3 Kernel Extension Info: No Kext Loaded this seems like the bootloader wasn't installed (at all or not correctly) or you're using some other kind of injector. get rid of it if thats the case. Link to comment Share on other sites More sharing options...
dwainstar Posted September 11, 2010 Share Posted September 11, 2010 I have been frustrated with this problem for days and i finally have my gtx 470 working at full res! 1. install SL and update to 10.6.4 but dont reboot to install the update. 2. Download the fermi package posted by CMF on page one. 3. install the kexts in the package with KextHelper B7 and then copy the frameworks provided to System/library/frameworks 4. Install the Myhack 1.1.4 bootloader and before starting the install, hit customize and under extra, check the graphics enabler box. 5. reboot ignoring caches and it should work flawlessly. Myhack installer -- http://www.mediafire.com/?gk941po72op3ex9 Fermi Package from page 1 - http://www.megaupload.com/?d=NIO5MC6F QE/CI! This worked for me, thanks! GA-P55A-UD3 EVGA GTX470 Core i5 750 HDTV via HDMI. I first followed tonymac's install guide using his beta iBoot4xx ISO. After installing I followed the instructions quoted starting at step 2 but used kextUtility instead, probably doesn't make a difference but that's just the one I've always used. Anyone have any luck with HDMI audio on the 470 in 10.6.4? Link to comment Share on other sites More sharing options...
rushstrike Posted September 11, 2010 Share Posted September 11, 2010 For the R256 drivers 9/09/2010. Do we need the new nvdagf100hal.kext directly from nvidia or is it something that can be editted using the old nvdagf100hal.kext ? I have tried it with the old nvdagf100hal.kext and it doesn't work. I can get into desktop at 1024x768 resolution but at least no KP. Link to comment Share on other sites More sharing options...
Enigma789 Posted September 12, 2010 Share Posted September 12, 2010 Any solution for black screen? os seems to work, because f12 ejecting is working. My gpu is gtx470 I had to add PciRoot= 1 to my com.apple.boot.plist in the /Extra/ folder to get my GTX 470 to quit displaying a black screen. Hope this helps! Link to comment Share on other sites More sharing options...
rabbit74 Posted September 12, 2010 Share Posted September 12, 2010 new nvidia driver, no nvdagf100hal.kext ...http://www.nvidia.com/object/quadro-macosx...a23-driver.html Thanks for letting us know. Tested with GTX-470 -Installed new driver -replaced Resman with the old one which has ids -added Pciroot=1 to com.apple.boot (and graphicsenabler=Y of coarse) -cleared caches -repaired permissions boots to black screen. Have not tried graphics string method yet. rabbit Link to comment Share on other sites More sharing options...
Diwad Posted September 12, 2010 Share Posted September 12, 2010 I have problems with bootloader: On every itd the same: chameleon rc5, aserebln. My config: Asus rampage III extreme I7 930 6gb ram Gtx 470 Link to comment Share on other sites More sharing options...
oz45 Posted September 12, 2010 Share Posted September 12, 2010 How to use aquamac Fermi 10.6.5? Link to comment Share on other sites More sharing options...
Diwad Posted September 12, 2010 Share Posted September 12, 2010 Its like that even on bootcd and on my 8800gts. Maybe it's mobo problem? Link to comment Share on other sites More sharing options...
dewberry Posted September 12, 2010 Share Posted September 12, 2010 this seems like the bootloader wasn't installed (at all or not correctly) or you're using some other kind of injector. get rid of it if thats the case. boot loader seems ok if i see: Darwin/x86 boot v5.0.132 - Chameleon v2.0-RC5 r301 Sure my install steps are right: dews-iMac:~ dew$ sudo su - Password: dews-iMac:~ root# cd /Volumes/fermi_package_20100803 dews-iMac:fermi_package_20100803 root# df -h |grep disk3s2 /dev/disk3s2 466Gi 17Gi 448Gi 4% / dews-iMac:fermi_package_20100803 root# cd bootloader/ dews-iMac:bootloader root# fdisk -f boot0 -u -y /dev/rdisk3 dews-iMac:bootloader root# dd if=boot1h of=/dev/rdisk3s2 2+0 records in 2+0 records out 1024 bytes transferred in 0.002663 secs (384544 bytes/sec) dews-iMac:bootloader root# cp boot / dews-iMac:bootloader root# lspci -vv INPUT: 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 06c0 (rev a3) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Unknown device 075f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc000000 (32-bit, non-prefetchable) Region 1: Memory at d8000000 (64-bit, prefetchable) Region 3: Memory at d4000000 (64-bit, prefetchable) Region 5: I/O ports at ac00 Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 40a3 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] #10de Capabilities: [06c] #00 01:00.1 Audio device: nVidia Corporation Unknown device 0be5 (rev a1) Subsystem: nVidia Corporation Unknown device 075f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 00000000fee00000 Data: 40a2 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] #10de And sure I have no other kext injectors. But my Fermi seems work with 480 GFX Strings solution now which was posted above. Link to comment Share on other sites More sharing options...
Lockwood Posted September 13, 2010 Share Posted September 13, 2010 That problem can be remedied by using only alphanumeric characters as your volume titles. I found that using any accented characters, for instance, replicates your problem. I have problems with bootloader: On every itd the same: chameleon rc5, aserebln. My config: Asus rampage III extreme I7 930 6gb ram Gtx 470 Link to comment Share on other sites More sharing options...
Diwad Posted September 13, 2010 Share Posted September 13, 2010 When I disconnect win drive it's ok. My windows partition titles are: Windows 7 Dokuments Backup Link to comment Share on other sites More sharing options...
Peter R. Posted September 13, 2010 Share Posted September 13, 2010 QE/CI! This worked for me, thanks!GA-P55A-UD3 EVGA GTX470 Core i5 750 HDTV via HDMI. I first followed tonymac's install guide using his beta iBoot4xx ISO. After installing I followed the instructions quoted starting at step 2 but used kextUtility instead, probably doesn't make a difference but that's just the one I've always used. Anyone have any luck with HDMI audio on the 470 in 10.6.4? I tried this with the same mobo but a Gainward GTX470. It boots in the correct resolution, but the MS wireless mouse locks up in the top left corner. Ideas welcome. Peter R. Link to comment Share on other sites More sharing options...
tj_jackson Posted September 13, 2010 Share Posted September 13, 2010 Take a look here - I have enclosed the in.plist and instructions: have GFXstring for GTX460 768mb? ________________________________ did the entire procedure here, most do not work in EVGA GTX460 768MB? have any other procedure for it? who did and it worked, I could go step by step please System:- Asus P6X58D-E- i7 930- 3x2gb corsair 1600mhz- EVGA GTX460 768mb Link to comment Share on other sites More sharing options...
Diwad Posted September 13, 2010 Share Posted September 13, 2010 Ok, i got up and running my gtx470! Thank you aquamac!Q!! I just have 1 small problem: in system info i have only 512 mb: NVIDIA GeForce GTX470: Model zestawu układów: NVIDIA GeForce GTX470 Typ: GPU Magistrala: PCIe Szerokość szyny PCIe: x16 VRAM (łącznie): 512 MB Producent: NVIDIA (0x10de) ID urządzenia: 0x06cd ID korekty: 0x00a3 Korekta ROM: 3172a Monitory: L1960TR: Rozdzielczość: 1280 x 1024 @ 60 Hz Głębia kolorów: Kolor 32 bitowy (ARGB8888) Monitor główny: Tak Odbicie lustrzane: Wył. Aktywny: Tak Obrót: Obsługiwany Złącze monitora: Status: Żaden monitor nie jest podłączony Link to comment Share on other sites More sharing options...
kevind963 Posted September 13, 2010 Share Posted September 13, 2010 I have been frustrated with this problem for days and i finally have my gtx 470 working at full res! 1. install SL and update to 10.6.4 but dont reboot to install the update. 2. Download the fermi package posted by CMF on page one. 3. install the kexts in the package with KextHelper B7 and then copy the frameworks provided to System/library/frameworks 4. Install the Myhack 1.1.4 bootloader and before starting the install, hit customize and under extra, check the graphics enabler box. 5. reboot ignoring caches and it should work flawlessly. Myhack installer -- http://www.mediafire.com/?gk941po72op3ex9 Fermi Package from page 1 - http://www.megaupload.com/?d=NIO5MC6F EVGA GTX 470 Super-clock fully working following this tutorial exactly. MSI P55-GD80 i7 930 2.6 GHz GTX 470 4 GB Ram and a very happy camper. I also had the black screen problem but after reinstalling Snow Leopard and following this tutorial it all worked perfect! Thanks to everyone! Link to comment Share on other sites More sharing options...
Diwad Posted September 13, 2010 Share Posted September 13, 2010 EVGA GTX 470 Super-clock fully working following this tutorial exactly. MSI P55-GD80 i7 930 2.6 GHz GTX 470 4 GB Ram and a very happy camper. I also had the black screen problem but after reinstalling Snow Leopard and following this tutorial it all worked perfect! Thanks to everyone! Is the i7 930 compatible witg p55 chipset?! Link to comment Share on other sites More sharing options...
A_RocC Posted September 14, 2010 Share Posted September 14, 2010 Intel P55 Express Chipset for Intel LGA 1156 CPU Based on the Intel P55 Express chipset, the MSI P55-GD80 supports Intel's latest LGA 1156 processors including the Intel Core i7 and Core i5 processors. Link to comment Share on other sites More sharing options...
MrCooley Posted September 14, 2010 Share Posted September 14, 2010 Any1 got GTX460 work? Link to comment Share on other sites More sharing options...
skunk71672 Posted September 14, 2010 Share Posted September 14, 2010 NOT YET Link to comment Share on other sites More sharing options...
kozlek Posted September 14, 2010 Share Posted September 14, 2010 GTX 460 has newer GF104 chip. For now we have only beta drivers for GF100 (GTX470/480). Link to comment Share on other sites More sharing options...
dwainstar Posted September 14, 2010 Share Posted September 14, 2010 QE/CI! This worked for me, thanks!GA-P55A-UD3 EVGA GTX470 Core i5 750 HDTV via HDMI. I first followed tonymac's install guide using his beta iBoot4xx ISO. After installing I followed the instructions quoted starting at step 2 but used kextUtility instead, probably doesn't make a difference but that's just the one I've always used. Anyone have any luck with HDMI audio on the 470 in 10.6.4? HDMI sound solved. I used VoodooHDA 0.2.1 beta. After installing it, 4 output devices were created all 4 named "Digital PCM #0". I then went to Audio MIDI Setup in the Utilities folder and set the format on all four outputs to 44100.0hz/2ch-16bit. After that I just changed each to my default sound device till I was able to hear audio. Looks like I'm fully functional guys, thanks for all the help, shoot me a PM if you have similar hardware and want some info on my experiences getting this going. Link to comment Share on other sites More sharing options...
Biggie604 Posted September 14, 2010 Share Posted September 14, 2010 Hi, i'm new to this site and really new to the hakintosh world, i'd like to know where I can find a compatibility list for video cards? I'm building a hakintosh from a list similiar to the lifehackers list, however the gigabyte geforce 9800 gt video card is discontinued, does anyone know where I can find this info? any info appreciated Link to comment Share on other sites More sharing options...
Recommended Posts