Konami® Posted January 18, 2009 Share Posted January 18, 2009 I'm having trouble here. I've installed the 10.5.6 Combo update; but afterwards when booting it simply halts here (kernel panic?): *Click to enlarge* I've followed this procedure: 1. Install leo4all release with vanilla kernel, no extra kexts. 2. Booted up to working system (from a partition with an old EFI bootloader). Installed PCEFI v9 and used the DSDTPatcherGUI to install DSDT-fix. Also installed the Appleintelcpupowermanagement.kext to prevent crash during update. 3. Rebooted to check if PcEFI v9 worked and everything else. It did. Ran 10.5.6 combo update which installed sucessfully. Rebooted to the problem stated above; kernel panic or something. Anyone got suggestions? Specs: GA-P35-DS3L motherboard with ICH9 chipset Core 2 Duo Processor Geforce 8800 GTS SATA connections for HDs. 4096mb RAM. ALC888 audio. See post #759 Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1046459 Share on other sites More sharing options...
Kinseek Posted January 18, 2009 Share Posted January 18, 2009 Thanks, it worked (wouldnt boot on 1st attempt, but second one its good) I installed nvinject 0.21 and it gave me increased resolution, but no quartz extreme. Know a fix to that one as well? EDIT: Found the solution. I shouldnt have used nvinject. I used Pacifist to extract the kexts from the 10.5.6 combo update (NVdaresman.kext and NVDANxHal.kext (x for 10, 20, 30, 40, 50)) which i then installed and deleted nvinject.kext. Then i simply used OSx86tools to add EFI-strings for my card. Easy peasy. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1046587 Share on other sites More sharing options...
ran22 Posted January 19, 2009 Share Posted January 19, 2009 Guys any success on using Realtek 8139 nic on 10.5.6? Mine is not working. It was detected but as soon i restart my pc it was disconnected. Any idea on how to fix this? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1047538 Share on other sites More sharing options...
HackintoshPlease Posted January 19, 2009 Share Posted January 19, 2009 It's been a while since I did the 10.5.5 update and some of the info has slipped away. . Even when I did that one I think I ended up hosing it all (waiting for root device) and reinstalling. I understand why this happened (didn't re-replace the proper kexts..) So could some kind soul please tell me which kexts to backup before I update again? My sig has all my info, but it's basically a Gigabyte EP35C-DS3R, all my drives are SATA (on the Intel controller, not the JMicron) and an 8800GT. Which kexts should I backup and then reinstall before I restart after I update? I'd really appreciate it so it's not so much trial and error... Thanks alot HP btw- I'm not using AHCI anymore.. Just IDE. Need to update sig.. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1048029 Share on other sites More sharing options...
36Joules Posted January 19, 2009 Share Posted January 19, 2009 Successfully updated a Shuttle SG31 vanilla 10.5.5 config via software update. No DSDT necessary, just PM disabler kext. Add ethernet to EFI string to fix TM, repatch HDA to fix audio, restore prior AppleSMBIOS, and that's it! Simple update. No QT/iTunes lag noted. For those of you using a non boot-132 vanilla config like mine, I just keep a folder of custom kexts from my last working system handy to patch any new incompatibilities. For my system, there are only 6. Someday I'll get around to the boot 132 method, maybe for 10.6. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1048156 Share on other sites More sharing options...
bangjogz Posted January 20, 2009 Share Posted January 20, 2009 successfully update to 10.5.6 using netkas guide..but lose audio.. have tried to repatch AppleHDA but did not work.. I'm using motherboard EP35-DS3L.. anyone can help? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1048872 Share on other sites More sharing options...
Baron Istefan Posted January 21, 2009 Share Posted January 21, 2009 I'm willing to try anything at this point. Can you provide a copy of the old AppleSMBIOS kext? Thanks, Do you have the one from 10.5.5 or earlier? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1050635 Share on other sites More sharing options...
kerowme Posted January 24, 2009 Share Posted January 24, 2009 Works! 10.5.6 perfect in Pavillion dv6265 updated from kayway 10.5.3, kernel vanilla. After reboot keyboard and mouse died but installed the applePS2kexts and solved!. Thank you. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1053636 Share on other sites More sharing options...
Mark Rose Posted January 24, 2009 Share Posted January 24, 2009 Has anyone out there upgraded to 10.5.6 on a Delll D620 with the Kalyway install running the mach kernel? Every time I tried, I would get the "Still waiting for root device" error. I would like to know if there is something different I need to do based on my hardware (Dell D620 2.16Ghz Core2Duo / Nvidia / Dell Wireless / Kalyway upgraded to 10.5.5). Also, with my Dell, although I have "Require password to wake this computer from sleep or screen saver" checked under System Preferences -> Security, when I hit a key or move my mouse while my screensaver is running, the password screen does not appear and I have access to my system. Any help would be greatly appreciated! Thanks! Mark Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1054712 Share on other sites More sharing options...
Tony Conte Posted January 24, 2009 Share Posted January 24, 2009 I work 10.5.6 fine although some users reported that their system crashed their logicboard burned and etc. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1054754 Share on other sites More sharing options...
SmartBrother Posted January 28, 2009 Share Posted January 28, 2009 how would someone add the ApplePS2kexts without a keyboard?..i only have a usb mice.... when i firsted installed iatkos 5.5..i had a cd drive and a dvd drive both ide..but it only shows the dvd drive..now after updating to 10.5.6..i have notin at all..any ideas?? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1059366 Share on other sites More sharing options...
Sam253 Posted January 31, 2009 Share Posted January 31, 2009 I tried to update and i got this message saying the install failed I'm on iATKOS 5i, and im on pci efi i think. i also used dsdt patcher and that said it was successful so i thought i was ready to update. obviously not can somebody tell me whats wrong? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1063362 Share on other sites More sharing options...
fantomas Posted January 31, 2009 Share Posted January 31, 2009 I tried to update and i got this message saying the install failed I'm on iATKOS 5i, and im on pci efi i think. i also used dsdt patcher and that said it was successful so i thought i was ready to update. obviously not can somebody tell me whats wrong? hi there's no needs to patching dsdt with the official applecomboupdate 10.5.6 just download it on the apple's web's side and install him me too i'm on iATKOS v5i + comboupdate 10.5.6 and all works out of the box p.s : do another proprely install of iATKOS v5i and then install the comboupdate like i teel you good luck Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1063382 Share on other sites More sharing options...
shortbus Posted January 31, 2009 Share Posted January 31, 2009 Hey guys. I need help. You can find my machine specs in my sig and a link to my install progress. I get this: Photo of error It says Mac OS Version is not set and double kernel panic. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1063937 Share on other sites More sharing options...
shortbus Posted January 31, 2009 Share Posted January 31, 2009 Whew. Nevermind. I switched to the voodoo 9.5 kernel. Awesome job on the voodoo kernel btw. Thanks! Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1064086 Share on other sites More sharing options...
Coop3dw Posted February 1, 2009 Share Posted February 1, 2009 The ApplePS2 kext for 10.5.6 work great for me on a Dell Latitude D830!! If only I could get my BCM5755 Ethernet or Intel 4965AGN wifi working, life would be just about perfect. As a workaround… Does anyone know if it's possible to get a little SMC USB-Eth adaptor to work (and if so how)? Thanks ! Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1065259 Share on other sites More sharing options...
cloudstrife87 Posted February 2, 2009 Share Posted February 2, 2009 Guys i seriously need help.... I've updated from iDeneb v1.3 10.5.5 to 10.5.6.... at first it won't boot up.... until i manually deleted the AppleIntelCPUPowerManagement.kext... Then i installed updated ApplePS2 kext to get my keyboard and trackpad working.... However all of my USB ports and integrated web cam is not functioning...I've tried searching for updated usb kext but it won't work too... also... my battery meter is missing too.... have anyone experienced this?? BTW i'm using compaq presario CQ45.... Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1065540 Share on other sites More sharing options...
mexifelio Posted February 3, 2009 Share Posted February 3, 2009 Has anyone been able to get the update to work with a Pentium D, or is it even possible to do with it? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1067806 Share on other sites More sharing options...
djsuit Posted February 4, 2009 Share Posted February 4, 2009 Has anyone been able to get the update to work with a Pentium D, or is it even possible to do with it? I HAVE. Install voodoo kernel. Pentium D is fully supported Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1068578 Share on other sites More sharing options...
901mike Posted February 5, 2009 Share Posted February 5, 2009 Copy the file contained in the attachment into the /System/Library/Extensions/IONetworkingFamily.kext/Contents/MacOS/ directory over-writing the one already there then as root in Terminal. rm -r /System/Library/Extensions/Caches rm -r /System/Library/Caches rm /System/Library/Extensions.mkext Reboot then hit the F8 key when the drive starts to be accessed to get to the Darwin boot loader to type in then enter key -f to force the reloading/caching of all .kext on the system it should now work. I tried this but every time I reboot it says the kernel extension was not installed properly and my airport is not recognised. However if I reboot and -f in Darwin it works. Any idea what I've done wrong or how to fix it? Thanks Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1069805 Share on other sites More sharing options...
MacUser2525 Posted February 5, 2009 Share Posted February 5, 2009 I tried this but every time I reboot it says the kernel extension was not installed properly and my airport is not recognised. However if I reboot and -f in Darwin it works. Any idea what I've done wrong or how to fix it? Thanks Had that happen with the OpenHaltRestart once downloading it again solved the problem, if using a full .kext since I see you talking Airport here you may want to get the kext helper then use that to install it. Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1070584 Share on other sites More sharing options...
Mammoth Posted February 12, 2009 Share Posted February 12, 2009 If anyone on a dv9000 with iatkos 10.5.4 updates let me know how it goes. I have always been afraid to update, I havent even doen anything just straight from the disc. Hey there, I've been trying to get my QE/CI to work and we have nearly the same machine. If you have any suggestions or files that might help me get mine going, that would be way cool. Thanks! Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1077909 Share on other sites More sharing options...
Mark Rose Posted February 17, 2009 Share Posted February 17, 2009 Has anyone out there upgraded to 10.5.6 on their D620 with the Kalyway install running the mach kernel? Every time I tried, I would get the "Still waiting for root device" error. I would like to know if there is something different I need to do based on my hardware (Dell D620 2.16Ghz Core2Duo / Nvidia / Dell Wireless / Kalyway upgraded to 10.5.5). Thanks! Also, with my Dell, although I have "Require password to wake this computer from sleep or screen saver" checked under System Preferences -> Security, when I hit a key or move my mouse while my screensaver is running, the password screen does not appear and I have access to my system. Has anyone ever encountered this and if so, what was done to resolve it? Thanks! Mark Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1083523 Share on other sites More sharing options...
GimmeRed Posted February 19, 2009 Share Posted February 19, 2009 I've seen several like myself that have found the USB ports are back to 1.1 instead of 2 after updating to 10.5.6. Is there a fix for this that I've not finding? Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1084966 Share on other sites More sharing options...
gengstapo Posted February 19, 2009 Share Posted February 19, 2009 update w/out hassle with retail install dvd boot-132 really nice, would give 10/10 for the point Link to comment https://www.insanelymac.com/forum/topic/141093-1056-released/page/32/#findComment-1085228 Share on other sites More sharing options...
Recommended Posts