zarac Posted June 26, 2008 Share Posted June 26, 2008 check it out at http://wiki.taruga.net/tiki-list_file_gall...php?galleryId=6 you need to register to get there also ALCinject.kext becomes obsolete with new HDAEnabler.kext Link to comment Share on other sites More sharing options...
iSkylla Posted June 26, 2008 Share Posted June 26, 2008 It's been there for a bit, good for people who don't know about the Enabler. It's made by Kabyl and makes AZAL audio into Intel HDEF in the dev tree. Link to comment Share on other sites More sharing options...
johan Posted June 26, 2008 Share Posted June 26, 2008 works great, thx Link to comment Share on other sites More sharing options...
Running With Scissors Posted June 26, 2008 Share Posted June 26, 2008 Works but still only got HD-Out on ALC 888 Intel High Definition Audio: Device ID: 0x14627267 Audio ID: 12 Available Devices: Link to comment Share on other sites More sharing options...
iSkylla Posted June 26, 2008 Share Posted June 26, 2008 I get all of it. The one bug I see is Speaker out is Internal, and I don't have internal speakers, it's connected to speakers. Even in System prefs it says Internal Speakers. Intel High Definition Audio: Device ID: 0x1458A002 Audio ID: 12 Available Devices: Headphone: Connection: 1/8 inch Jack Speaker: Connection: Internal Line In: Connection: 1/8 inch Jack S/P-DIF In: Connection: Optical S/P-DIF Out: Connection: Optical Microphone: Connection: Internal Link to comment Share on other sites More sharing options...
Konami® Posted June 26, 2008 Share Posted June 26, 2008 Works like a charm in my system, thanks a lot Link to comment Share on other sites More sharing options...
Law_zg Posted June 27, 2008 Share Posted June 27, 2008 ALC662 partially working: Toruga's patcher 1.20 HDAEnabler.kext without ALCinject.kext ALC662.tiff Sound_Output.tiff Sound_input.tiff Link to comment Share on other sites More sharing options...
macgirl Posted June 27, 2008 Share Posted June 27, 2008 also ALCinject.kext becomes obsolete with new HDAEnabler.kext HDAEnabler.kext on some Dell's does not work, the System Profiler Shows Audio (Built In) but no sound on any port. So ALCinject.kext is not obsolete at all. Link to comment Share on other sites More sharing options...
LawlessPPC Posted June 27, 2008 Share Posted June 27, 2008 so would this be better than ALC888_6port that I am already running and if so how. Will it give me quad in I tunes or will I still need to run AU Lab for that Link to comment Share on other sites More sharing options...
W.oo.dy Posted June 27, 2008 Share Posted June 27, 2008 Don't work here, alc883... When i restart, i miss the sound, i repair the permissions, take off alcinject, clean the cache, and nothing. Strange... in my Leo Test partition is working fine, but not in my principal Os, i've made the same process on both. Link to comment Share on other sites More sharing options...
mitch_de Posted June 28, 2008 Share Posted June 28, 2008 Works here, ALC883 (MSI 965 NEO-F) Thanks ! HINT: "..i repair the permissions,..:" Repairung permissions ONLY!!! can work for Apple .kexts NEVER for selfmade. Repair permission function simply didnt know anything about right permissions for selfmade .kext ! If permissions didnt "fit" (mostly owner:group problem root:wheel) the .kext, even installed will not be loaded ! You can check that if THATS your problem by open an terminal and type ls -lR add an SPACE and drag & Drop the xxx.kext into the terminal window. Result should be (ever root:wheel): Last login: Sat Jun 28 06:23:14 on console amiasus:~ ami$ ls -lR /System/Library/Extensions/HDAEnabler.kext drwxr-xr-x@ 4 root wheel 136 27 Jun 03:20 Contents /System/Library/Extensions/HDAEnabler.kext/Contents: -rwxr-xr-x@ 1 root wheel 1632 27 Jun 03:20 Info.plist drwxr-xr-x@ 3 root wheel 102 27 Jun 03:20 MacOS /System/Library/Extensions/HDAEnabler.kext/Contents/MacOS: -rwxr-xr-x@ 1 root wheel 29256 27 Jun 03:20 HDAEnabler amiasus:~ ami$ If rights are wrong, install again this .kext with kext helper tool and reboot. The same is guilty for all other selfmade .kext like NVInject .... if they are not installed with an .pkd (simple zipped .kext file) which tell the repair permissions command what are the rights for that added kexts. Link to comment Share on other sites More sharing options...
kitmac Posted June 28, 2008 Share Posted June 28, 2008 I installed the kext with kexthelper fixed permissions and rebooted... Now I actually have something under Built-in audio but nothing under available devices.... Should I use Taruga's patch with the .txt file again...????? Link to comment Share on other sites More sharing options...
mitch_de Posted June 28, 2008 Share Posted June 28, 2008 I installed the kext with kexthelper fixed permissions and rebooted...Now I actually have something under Built-in audio but nothing under available devices.... Should I use Taruga's patch with the .txt file again...????? [/img] Do you can set Sound Settings in the Systempreferences ? It set correct (to which Port/ Plug Audio Out goes) you should have sound already ! Try all available Output Ports if you have more than one listet. (One should be LINIE OUT, one Headphone, ....) Mine all named same BUG?!, but i took the firrst and have sound on line out. GOAL !!! Link to comment Share on other sites More sharing options...
gizmoarena Posted June 28, 2008 Share Posted June 28, 2008 No output HDAenabler shows only Intel High Definition Audio: Device ID: 0x8086E203 Audio ID: 12 Available Devices: Can anyone tell me the exact steps to use it. My one is ALC880 btw (I have codec_dump for my chipset). Link to comment Share on other sites More sharing options...
iSkylla Posted June 28, 2008 Share Posted June 28, 2008 You need both the patched HDA and the Enabler. To do a codec dump you need to go into linux and type this: cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt It could be codec#1 or 0 or 2 depending so it's trial and error. Link to comment Share on other sites More sharing options...
El Massman Posted June 28, 2008 Share Posted June 28, 2008 works perfectly under p5w DH deluxe 882. thanks Link to comment Share on other sites More sharing options...
gizmoarena Posted June 28, 2008 Share Posted June 28, 2008 You need both the patched HDA and the Enabler. To do a codec dump you need to go into linux and type this: cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt It could be codec#1 or 0 or 2 depending so it's trial and error. I have both kexts. installed them, nothing happened. Link to comment Share on other sites More sharing options...
yopale Posted June 28, 2008 Share Posted June 28, 2008 Patched AppleHDA.kext works perfectly with alc 888 after i replaced alcinject.kext with HDAEnabler.kext. Thanks Link to comment Share on other sites More sharing options...
antic Posted June 28, 2008 Share Posted June 28, 2008 Patched alc882 version. Sleep now working with this new AppleHDA.kext. Info showing in System Profiler with HDAEnabler.kext Link to comment Share on other sites More sharing options...
anibalin Posted June 28, 2008 Share Posted June 28, 2008 gb P35 DS3L here. works like a charm. thanks taruga. Link to comment Share on other sites More sharing options...
kitmac Posted June 28, 2008 Share Posted June 28, 2008 Well I went ahead and used taruga's patch 1.20 with alc888.txt Everything was detected but on restart I lost sound and system profiler went back to no built in audio... taruga's patch removed appleazalia.kext which was apparently providing me with sound... Replaced azalia and bam.....Sound again... I tried this because I wanted to see all my inputs in system profiler...guess i went about this incorrectly. Somebody explain this to us................. This is all started because I coudn't install a program called Hear I figured my codec settings weren't set correctly and that this might allow me to install All U people that have used this new Kext succesfully and have all your inputs and outputs in profiler plz try this app out and report back here if it works... INFO> http://www.anonym.to/?http://www.joesoft.c...oducts/hear.php Serial> 8311-4422-3333-7444-5 DL> www.anonym.to/?http://www.versiontracker.com/dyn/moreinfo/macosx/34207 Link to comment Share on other sites More sharing options...
Lolrus Posted June 29, 2008 Share Posted June 29, 2008 Tried this with my 889A and it seemed to work but everything sounded terrible, almost zero bass output! I'll wait for another release but back to ALCinject for me which works fine. Link to comment Share on other sites More sharing options...
thefinalprophecy Posted June 29, 2008 Share Posted June 29, 2008 For those that tried it with the ALC882, does it give full 6 channel output or just the 2 like with ALCinject? If only two, then what makes this better than ALCinject? Link to comment Share on other sites More sharing options...
dubhead Posted June 29, 2008 Share Posted June 29, 2008 The kext works and systemprofiler also shows output ..but i have same BASSless output as a former Poster...with ALC889a so back to ALCInject keep up the good work Taruga !! Link to comment Share on other sites More sharing options...
Lolrus Posted July 2, 2008 Share Posted July 2, 2008 I just noticed that even after deleting the kext file and rebuilding kext cache I still get this upon boot! HDAEnabler: Copyright (c) 2008 by Kabyl HDAEnabler: 05/05/2008 Added SPAudio support:Taruga Anyone know how I can remove this? Link to comment Share on other sites More sharing options...
Recommended Posts