ATI Radeon HD pkg installers 10.5.x & 10.6

[pitkin2009]

WITH HD3650 ONLY THIS WORKS

LINK

IN MY CASE...

TRY

[CarreraGT]

I have ATI Mobility Radeon HD3470 on my Acer 4730ZG.But how can i drive it~~~~

[celinik]

Because i can see that there are a lot of people using ATI HD 3470 and very few that try to make the drivers, can someone lead me to some kind of tutorial how to try at least make an apple driver using....-i suppose- the win32 source?Is there some kind of programme, or just files with code?

[SharkyNL]

Sorry for my slow response been outta town. here's some screens

First!

 

Then!

 

remember i have had both working!

 

Edit:

Fixed the bar problems, fixed by changing the frame buffer, but now when i connect just my 22 inch w/ DVI the screen just blinks on and off every few seconds. it does that at native resolution.

 

 

Hello MSOSX,

 

I have exactly the same problem ("that my screen blinks on and off every few seconds") with my videocard (HD 2400 Pro) if i connect w/ DVI with mine 20 inch screen. I now use a DVItoVGA converter, but I hope someone can solve this problem because I really want DVI support.

[appleholic]

Device ID

 

ATI MOBILITY RADEON HD 2300 ==============> 7210

ATI MOBILITY RADEON HD 2300 ==============> 7211

ATI MOBILITY RADEON HD 2400 ==============> 94C9

ATI MOBILITY RADEON HD 2400 XT ============> 94C8

ATI MOBILITY RADEON HD 2600 ==============> 9581

ATI MOBILITY RADEON HD 2600 XT ============> 9583

ATI MOBILITY RADEON HD 2700 ==============> 9583

ATI MOBILITY RADEON HD 3430 ==============> 95C2

ATI MOBILITY RADEON HD 3450 ==============> 95C4

ATI MOBILITY RADEON HD 3470 ==============> 95C4 -> Hope.... MY Model

ATI MOBILITY RADEON HD 3650 ==============> 9591

ATI MOBILITY RADEON HD 3670 ==============> 9593

ATI MOBILITY RADEON HD 3850 ==============> 9504

ATI MOBILITY RADEON HD 3850 X2 ============> 9506

ATI MOBILITY RADEON HD 3870 ============> 9508

ATI MOBILITY RADEON HD 3870 X2 ============> 9509

[enzo1]

Hi

I have HD 2600 PRO (device id 9589)

is there a reason to use this packages?

currently i use natit (i think it's the latest one) and edited plist in RADEONX2000.KEXT to add my device ID

all seem to work fine (resolution/qe/ci)

how do I know if it's using lamna or megadolon?

 

Hi WinstonAce,

 

I have tried to install the new ATI HD2600Pro Pcie in my new OS X 10.5.6, but each time I reboot, I have a black screen.

The only solution I managed to have working is to install the old Natit drivers that worked with my old 10.5.5 OS.

However, qe/ci is not available.

I saw in your post that you have it working after editing RAGEAONX2000.KEXT, adding the device ID.

As I am a complete NOB, could you walk me through the editing process?

Thanks in advance.

 

 

 

 

Enzo1

[neoxfl]

HI,

 

I have dell studio 1535 I have ideneb 1.3 10.5.5. I got wireless to work on it. I also have bluetooth mouse that connects( no prefs ??) I think i haev ati 3450 video card, does anyone have this working on leopard. I have 1024x768 resolution on it (sucks!!!) Please help me on this video drivers?????

 

Thanks a Lot

[WinstonAce]

Hi WinstonAce,

 

I have tried to install the new ATI HD2600Pro Pcie in my new OS X 10.5.6, but each time I reboot, I have a black screen.

The only solution I managed to have working is to install the old Natit drivers that worked with my old 10.5.5 OS.

However, qe/ci is not available.

I saw in your post that you have it working after editing RAGEAONX2000.KEXT, adding the device ID.

As I am a complete NOB, could you walk me through the editing process?

Thanks in advance.

Enzo1

 

write in terminal

 

sudo nano /System/Library/Extensions/ATIRadeonX2000.kext/Contents/Info.plist

 

go down to the line with the device id's, add your's

 

you should also update your cache, you can do it by typing this in terminal

 

sudo touch /System/Library/Extensions

sudo rm -rf /System/Library/Extensions.mkext

[ridgeline]

HI,

 

I have dell studio 1535 I have ideneb 1.3 10.5.5. I got wireless to work on it. I also have bluetooth mouse that connects( no prefs ??) I think i haev ati 3450 video card, does anyone have this working on leopard. I have 1024x768 resolution on it (sucks!!!) Please help me on this video drivers?????

 

Thanks a Lot

 

 

please read the thread you posted in.....

[eg7737]

hey did you ever get iatkos working on your gateway m6862 i have the same computer and dont know what settings i need in the customized section of the iatkos dvd.

 

 

 

 

Hi....

 

I saw that you've provided a lot of help for ATi drivers. I'm looking for a driver for ATi MOBILITY Radeon HD 2600. And SigmaTel STAC9205 sound driver..

 

Installed iATKOS v4.1i

 

I DESPERATELY need this working on my Gateway M 6862.

GATEWAY M6862

Processor : Intel Core 2 Duo T5750

Motherboard : Intel Crestline-PM PM965

RAM : 4096 MB (DDR2-667 DDR2 SDRAM)

Graphics: ATI Mobility Radeon HD 2600 (512 MB)

Sound : SigmaTel STAC9205X

HDD : WDC WD2500BEVS-22UST0 (232 GB, IDE)

BIOS : Phoenix (03/28/08)

 

Here's my EVEREST Hardware Report : "http://rapidshare.com/files/168407469/PC_Everest_Report.txt.html"

 

Please guide.....Thanks in advance!

 

Anupam.

[enzo1]

write in terminal

 

 

 

go down to the line with the device id's, add your's

 

you should also update your cache, you can do it by typing this in terminal

 

Thank's a Million.

I'll give it a try tonight.

Regards

Enzo1

[Boombeng]

I checked the new drivers to see if there was anything in there referencing our cards. The 10.5.6 drivers contained (via inspecting hex) the same ammount of 3450 references as other "working" cards, so that particular card looks promising, but the drivers contained almost no reference to the 3650 (sadface).

 

What ammount of 3450 references ?

And what reference to the 3650 ?

You mean 95C4 and 9591 in hex ?

[denull]

hey developers i was wondering what's the status of 3470? and if you think it's ready for testing please contact me i'll be glad my notebook hunger for osX is huge haha

 

Respect.

[neoxfl]

Hi Winstonace

 

I have ati radeon 3540, My device id is 95C4 will it work if i add it to info.plist to mod it? please reply

Looking forward to getting ATI working in my dell studio.

 

Thanks,

Neoxfl

[enzo1]

Thank's a Million.

I'll give it a try tonight.

Regards

Enzo1

 

WinstonAce

 

Sorry to bother you again,

I managed to open the Info.plist file in Terminal, but I realize i am even a Nober person than I thought (lol)

I searched for the device ID, but did not find it. Is it the 4 digit number between ()?

What line is it in? What label should I search in the text?

Thanks again

Enzo1

[Exia25]

Any news for 4850?

[bullys]

hi guys...

sorry for this post.. many may think i didnt read the whole thread but i did...

the thing is i cannot get my HD Radeon 3650 to run with 10.5.6

in 10.5.5 everything works finestly but when i installed 10.5.6 i got the disco-screen and was only able to boot in safe mode...

 

every driver that was offered at that time didnt work... that was 3 weeks ago...

 

is there a driver that works with my 3650 and 10.5.6 now ?

if yes, where to find...

 

thx for reply.. i just dont want to invest another 10 hours to get my system back working ...

 

my specs:

gigabyte p35 ds3

ati hd radeon 3650

3 x 2 gb ddr2 ram

tbs of sata hds...

 

regards bullys

[Meowolf]

I've been trying to get ideneb working on my computer for over 4 days now (been trying to get it working since 2 years ago, gave up, tried again, gave up, tried again)

 

I finally got mac to boot using the hdd, but now I can't get QE, I've tried the installer you've posted, but it doesn't work properly. After I restart, I get a screen filled with random colors. I don't know what the reason could be, so I'm posting my specs.

 

Specs

 

Asrock DualVsta 775

Intel Celeron 3.20GHz

1GB Kingston DDR Memory (FSB=333MHz)

Western Digital 40GB IDE HDD (Secondary - 160GB Seagate Barracuda SATA HDD)

Sapphire ATI Radeon HD3650 (Dev ID. - 0x9598)

iDeneb 1.5.5

 

P.s. I use a DVI to VGA adapter

 

The graphics card has been oced to counteract the effects of powerplay, nt sure if it affects the kexts. I kinda deleted the original file I'd backed up accidentally, so I have no way of reverting to the original bios.

 

Any help would be appreciated ....

[completemacnewbie]

I have been working on getting my PowerColor HD 3850 512MB GDDR3 to work for almost a week now. I've tried more different combinations of kext's and framebuffer graphics strings (Lamna, Triakis, Megalodon) in my boot.plist than I can count. I'm just about ready to give up.

I did have everythign working ALMOST perfect with an Asus EAH2400Pro (10.5.6, full resolution, QE/CI, sleep etc.). The only thing I was missing was dual displays. My 2400 bit the dust last week so I decided to give the 3850 a try since I had seen some people say they got it working with dual display, and there seemed to be a lot of support and driver packages out there. So far I haven't found any that work. The best I've don is get to the blue screen with no cursor. I've moved the mouse around each time to make sure it wasn't the secondary display, but no luck. I've had varying success depending on which driver / framebuffer combo i used. Everything from garbled screens to just stopping at the end of the verbose mode and not going into the GUI at all.

Any suggestions would be great.

[Methanoid]

I have been working on getting my PowerColor HD 3850 512MB GDDR3 to work for almost a week now. I've tried more different combinations of kext's and framebuffer graphics strings (Lamna, Triakis, Megalodon) in my boot.plist than I can count. I'm just about ready to give up.

 

Me too.... HIS 3850 256mb

 

But page one says

ATI Radeon HD 3800 series

Device ID: 9501, 9505

Download

 

Did that and didnt work.. my Device ID is 9505

 

I'm totally confused and no doubt need to YET ANOTHER reinstall from all the messing about with com.plists and EFI Studio and Driver this and that... all allegedly work.

 

I think there is a real problem with 10.5.6 distros and Radeon 3850

 

I've tried and failed with iPC and with XxX distros...

 

Kinda losing the will to live.... maybe just buy a bloody Mac??!?

[revengangel]

Device ID

 

ATI MOBILITY RADEON HD 2300 ==============> 7210

ATI MOBILITY RADEON HD 2300 ==============> 7211

ATI MOBILITY RADEON HD 2400 ==============> 94C9

ATI MOBILITY RADEON HD 2400 XT ============> 94C8

ATI MOBILITY RADEON HD 2600 ==============> 9581

ATI MOBILITY RADEON HD 2600 XT ============> 9583

ATI MOBILITY RADEON HD 2700 ==============> 9583

ATI MOBILITY RADEON HD 3430 ==============> 95C2

ATI MOBILITY RADEON HD 3450 ==============> 95C4

ATI MOBILITY RADEON HD 3470 ==============> 95C4 -> Hope.... MY Model

ATI MOBILITY RADEON HD 3650 ==============> 9591

ATI MOBILITY RADEON HD 3670 ==============> 9593

ATI MOBILITY RADEON HD 3850 ==============> 9504

ATI MOBILITY RADEON HD 3850 X2 ============> 9506

ATI MOBILITY RADEON HD 3870 ============> 9508

ATI MOBILITY RADEON HD 3870 X2 ============> 9509

 

 

Lot of Acer laptops comes with Ati mobility radeon HD 3200. i have 6 friend of mine with the same graphic card, but until now there is no solution to make it work. I hope someone will investigate on mobility cards....

 

Revengangel,

 

Thanx a lot for your info.

Could it be i am the most damned in this section.

being perhaps the only one that can't get it to work ?!

 

Thank you for the suggested package, too.

Before i start - could you please provide just a basic

info for what steps you took?

And i suppose, you ain't on a CRT-monitor with a D-Sub converter...

 

Greetings

UPDATE

 

Wooooooooorks !!!

 

Revengangel, i can't describe you how grateful i am to you !

 

I was so pessimistic this would work out for me, that i even did not

do anything "the right" way - just removed all ATI* and Natit.kext

quickly, ran the installer you provided and directly rebooted !

The system was even not touched at all, cause i use it as a test platform

(base install of a new 10.5.6 version, and with 9.4.0 StageXNU - which is a kernel

i try out for a first time), so i highly doubted it would have sense,

having no 10.5.5 base installed at the moment.

 

But after having restarted?

Quick look in Profiler - WTF ?! It works ?! Impossible

 

I am so happy now, THANK YOU 1000 times for your help,

i have been struggling with this issue for almost 10 days !

 

I wish you good health and all the best ! You are THE MAN !

 

*Going to do a new stable and clean install*

 

 

Well, im so glad that it works for u too

The friver made by Lastexile, but anyway im happy bcoz with my solution works with that driver.

For those who not succed, all i can tell i had a leo4all10.5.2 base install, with working video card. I made a 10.5.5 combo update from apple as it was described here at insanelymac in some other topic, i repeated my procedure, and my card works again.

Yesterday i upgraded to 10.5.6, repeated the same procedure, and here is the result:

 

 

ATI Radeon HD 3600:

 

Chipset Model: ATI Radeon HD 3600

Type: Display

Bus: PCI

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9596

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

Display:

Resolution: 1920 x 1080 @ 75 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Display Connector:

Status: No display connected

 

I dont care about agpgart , bcoz, noone of the previous versions worked for me.

Im happy with my hackintosh

 

PS for Lastexile: your latest 3650 AGP drivers doesnt want to work, but the previos one works perfectly even with 10.5.6.

[completemacnewbie]

I hear you about just buying a Mac, I've thought that a few times throughout the past year. My wife keeps saying the same when I spend hours getting no where.

When you mentioned 10.5.6 specifically, I thought I'd mention that I tried iDeneb 1.3 (10.5.5) and didn't have much luck there either. Mostly the same, I got to a point where I had a blue screen with no cursor and that's about it. I actually tried installing both iDeneb and iPC without the Radeon 3800 drivers and then did custom clean installs after the OS was installed. As you know, still no luck. I'm going to mess with it this weekend, and possibly even go back to good old Kalyway 10.5.2 and give that a try. I had good luck with that as a base when I was trying to get the HD2400Pro working. I'll report back if I have any luck.

 

Cheers!

[doki@pcModz]

I've Scan this thread in search and hope that somebody have success on ATI HD2600PRO PCI...I seems that all have success on AGP And PCIe only... Anybody made it work on ATI HD 2600 Pro PCI card?

 

I've choose PCI since my setup is the Intel Atom ITX Board which PCI graphics card is only the option.

 

By the way here's my device ID 0x95cc

 

I hope somebody can help me out.

 

Thanks in Advance

[Methanoid]

You may try my modded NATIT.kext.

I moddded it a bit, got also KP or blue screen with Natits try&error installs. (mostly .pgk have also some natit.kext installed too).

Be sure that you have an Megadlon.plugin in the ATIRNDRV.kext (in Plugin folder od that .kext).

This natit uses Megadlon Framebuffer.

Some OSX86 DVDs didnt have all Framebuffers included (use older ATI drivers without Megadlon plugin).

 

Remove other natit.kext.

Install this Natit.kext with KEXTHELPER or OSXTools (because of rights setting).

I would also remove extensions.mkext before reboot

 

Mitch-de, this worked fine for me...for which I am VERY grateful..(as no other drivers/kexts work with my 3850 Radeon). I'm wondering what files are needed to go with it (if I need to re-install or feel brave enough to try a Boot-132 install)....????

[bibendum]

I've Scan this thread in search and hope that somebody have success on ATI HD2600PRO PCI...I seems that all have success on AGP And PCIe only... Anybody made it work on ATI HD 2600 Pro PCI card?

 

I've choose PCI since my setup is the Intel Atom ITX Board which PCI graphics card is only the option.

...snip...

 

I have serious doubts about the ability to support this card. At one point Apple specifically excluded support for PCI gfx cards for Quartz extreme as the load on the PCI bus was too high. At that time there were some patches available like PCI Extreme or something similar, but I don't hold out much hope for this card.

 

Patrick