giacomoleopardo Posted April 15, 2018 Share Posted April 15, 2018 4 hours ago, MaLd0n said: use updated app RunMe.app.zip Here you go! https://www23.zippyshare.com/v/oiF10BX4/file.html Thank you g. Link to comment Share on other sites More sharing options...
lelet Posted April 15, 2018 Share Posted April 15, 2018 Quote Hi @MaLd0n, would you like to make a last attempt with my configuration? I'm only interested in the Thunderbolt part that for now works partially Many people on X299 have managed to succeed, do you think it's possible to enable hotplug on a Z370 chipset? Hardware: I am using the SMBIOS iMac 18,3 with HSierra 10.13.4. - Gigabyte Z370 Ultra Gaming - Gigabyte Alpine Ridge PCIe (very similar to Asrock, in fact has 2 connections Thunderbolt 3 and no USB 3.1) I have removed all the patches and SSDTs from my system, and currently happens this: - Devices must be turned on before booting the computer to work properly; - After sleep, they reconnect correctly and work; - If I turn them off during sleep, and turn them back on before waking up the computer, they reconnect properly and work; - If I turn off a device (the last one in the chain), they all disconnect; - If the computer turns on, I turn off the devices and then turning them back on, sometimes they reconnect (I have to turn them all off, otherwise this does not happen), however they do not work properly and the computer can freeze until I turn them off. I think the line to get the hotplug is thin, but I do not know what to do. At this point I think it's a power management problem, so I've done two exports if they can be useful: Send Me without SSDT and with the devices turned OFF: DOWNLOAD Send Me without SSDT and with the devices ON: DOWNLOAD I add the original tables of an iMac 18,3 from this thread (I think they can be useful for the values used by Apple): DarwinDumper_iMac18,3_Apple_X64_Sierra_16F2073_Edited.zip iMac 18,3 IOReg: Download Quote replace, reboot and extract new SEND_ME, don't change nothing, just replace CLOVER.zip Thank you! Here's to you: SEND_ME On 14/4/2018 at 4:54 PM, MaLd0n said: i'll check it, need a little time for it Hi @MaLd0n, any news with my problem? I'm only interested in the Thunderbolt hotplug... Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 15 hours ago, giacomoleopardo said: Hello MaLd0n, my configuration: ASUS Z170i Pro Gaming ITX Intel Kaby Lake i7 7700 no discrete Graphics Bios version 3607 (latest) macOS High Sierra 10.13.4 - fresh install SMBios iMac 18,1 (the only one that works without discrete graphics on 10.13.4) Here's my Send me files https://www13.zippyshare.com/v/FZcSTT6I/file.html Thank you g. try CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 16, 2018 Author Share Posted April 16, 2018 13 minutes ago, fryysyd said: Moderator, please make one for this one. Thanks ! RunMe.zip Send me iMac 2.zip.001 Send me iMac 2.zip.002 use my previous folder, just replace config.plist config.plist.zip 1 Link to comment Share on other sites More sharing options...
loscamos Posted April 16, 2018 Share Posted April 16, 2018 Hi everyone, I am creating my first bootable drive. I did all the steps in the guide but I am not sure wether I did it right or wrong. On this guide it's just mentioned to replace the entire clover folder while on many other guides online there are a plenty more steps to do. Does the clover folder replace all the steps mentioned in other guides?Thanks Link to comment Share on other sites More sharing options...
fryysyd Posted April 16, 2018 Share Posted April 16, 2018 (edited) On 2018/4/14 at 11:08 PM, MaLd0n said: Edited April 22, 2018 by fryysyd Link to comment Share on other sites More sharing options...
MaLd0n Posted April 16, 2018 Author Share Posted April 16, 2018 1 hour ago, loscamos said: Hi everyone, I am creating my first bootable drive. I did all the steps in the guide but I am not sure wether I did it right or wrong. On this guide it's just mentioned to replace the entire clover folder while on many other guides online there are a plenty more steps to do. Does the clover folder replace all the steps mentioned in other guides?Thanks Yes 45 minutes ago, fryysyd said: Moderator, do you set PluginType=1 in DSDT? How does DSDT change to PluginType=0? Not in config.plist. take a test with last config.plist 1 Link to comment Share on other sites More sharing options...
blackheatinc Posted April 16, 2018 Share Posted April 16, 2018 Hi MaLd0n, My configuration is : Gigabyte GA-Z270X-Gaming 7 Intel Core i7 7700K 64GB DDR4, 1 TB Samsung 960 EVO nVidia GeForce GTX 1070 Here is the "send me" files https://1drv.ms/u/s!AkOMbIsL_s0HhjcnS0-01gwn5n0D Many great thanks 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 16, 2018 Author Share Posted April 16, 2018 25 minutes ago, blackheatinc said: Hi MaLd0n, My configuration is : Gigabyte GA-Z270X-Gaming 7 Intel Core i7 7700K 64GB DDR4, 1 TB Samsung 960 EVO nVidia GeForce GTX 1070 Here is the "send me" files https://1drv.ms/u/s!AkOMbIsL_s0HhjcnS0-01gwn5n0D Many great thanks new SEND_ME after reboot CLOVER.zip 1 Link to comment Share on other sites More sharing options...
blackheatinc Posted April 16, 2018 Share Posted April 16, 2018 20 minutes ago, MaLd0n said: new SEND_ME after reboot CLOVER.zip I have tried and I can't seem to be able to input password in FileVault (nothing happens when I press anything in the keyboard) Link to comment Share on other sites More sharing options...
blackheatinc Posted April 16, 2018 Share Posted April 16, 2018 37 minutes ago, MaLd0n said: new SEND_ME after reboot CLOVER.zip I have added AsAmiShim.efi and ApfsJumpStart.efi into the drivers64UEFI folder and I can now enter the FileVault password and boot into the system. Here is the new "SEND_ME" https://1drv.ms/u/s!AkOMbIsL_s0HhjiX1ySIEc6_C7Lt Many great thanks 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 16, 2018 Author Share Posted April 16, 2018 21 minutes ago, blackheatinc said: I have added AsAmiShim.efi and ApfsJumpStart.efi into the drivers64UEFI folder and I can now enter the FileVault password and boot into the system. Here is the new "SEND_ME" https://1drv.ms/u/s!AkOMbIsL_s0HhjiX1ySIEc6_C7Lt Many great thanks looks good, let me know if work good 1 Link to comment Share on other sites More sharing options...
blackheatinc Posted April 16, 2018 Share Posted April 16, 2018 31 minutes ago, MaLd0n said: looks good, let me know if work good Still running and it works great. Thanks a lot. And by the way, do you know how to enable AirDrop with external USB Bluetooth. I have the ASUS BT-400 4.0 LE (USB 4.0) and TPLink Archer T6E (PCIe) but I can't seem to enable AirDrop and Handsoff. Thanks a lot. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 16, 2018 Author Share Posted April 16, 2018 10 minutes ago, blackheatinc said: Still running and it works great. Thanks a lot. And by the way, do you know how to enable AirDrop with external USB Bluetooth. I have the ASUS BT-400 4.0 LE (USB 4.0) and TPLink Archer T6E (PCIe) but I can't seem to enable AirDrop and Handsoff. Thanks a lot. no idea, but i think in search forum have it 1 Link to comment Share on other sites More sharing options...
vtec100000000rpm Posted April 18, 2018 Share Posted April 18, 2018 On 2018/4/15 at 12:07 AM, MaLd0n said: put one DGPU and disable IGPU There is no way to disable iGPU(HD610) in BIOS settings. So I replaced RADEON HD5450 by GeForce GT710 Kepler (10.13.4 Genuine driver), but could not boot from USB installer.... Geforce9400 can boot and QE/CI is enabled, but it does not support UEFI, so the display-output is enable only after the driver has been loaded. Link to comment Share on other sites More sharing options...
strakm39 Posted April 18, 2018 Share Posted April 18, 2018 Success with HP 27-a257 AIO thanks to MaLdOn I have 10.13.4 installed and running. Sleeps and wakes, all USB ports working , ethernet working, sound ok but mic not working. Intel wifi, touch screen and card reader not working but thats ok. See my clover file if anybody tries an HP AIO. Cant upload files here so https://www34.zippyshare.com/v/G77EUVwB/file.html Link to comment Share on other sites More sharing options...
giacomoleopardo Posted April 18, 2018 Share Posted April 18, 2018 MaLd0n, thanks for the DSDT, I'm gonna try it asap! Meanwhile, would you try to patch this one? ASUS Rampage V Extreme (latest unlocked bios) Intel i7 5820k gigabyte GTX 980 OC 4GB SSD 850 evo Asus thunderboltEXII DeckLink Mini Monitor PciExpress video acquisition card FireWire card PciExpress High Sierra 10.13.4 fresh install Her are proper files. Thanks https://www1.zippyshare.com/v/aAIEJl8G/file.html 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 18, 2018 Author Share Posted April 18, 2018 5 hours ago, strakm39 said: Success with HP 27-a257 AIO thanks to MaLdOn I have 10.13.4 installed and running. Sleeps and wakes, all USB ports working , ethernet working, sound ok but mic not working. Intel wifi, touch screen and card reader not working but thats ok. See my clover file if anybody tries an HP AIO. Cant upload files here so https://www34.zippyshare.com/v/G77EUVwB/file.html i need a full dump, read first post 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 18, 2018 Author Share Posted April 18, 2018 1 hour ago, giacomoleopardo said: MaLd0n, thanks for the DSDT, I'm gonna try it asap! Meanwhile, would you try to patch this one? ASUS Rampage V Extreme (latest unlocked bios) Intel i7 5820k gigabyte GTX 980 OC 4GB SSD 850 evo Asus thunderboltEXII DeckLink Mini Monitor PciExpress video acquisition card FireWire card PciExpress High Sierra 10.13.4 fresh install Her are proper files. Thanks https://www1.zippyshare.com/v/aAIEJl8G/file.html CLOVER.zip 1 Link to comment Share on other sites More sharing options...
giacomoleopardo Posted April 19, 2018 Share Posted April 19, 2018 1 hour ago, MaLd0n said: CLOVER.zip I noticed that you have changed a few things in config, kext etc...Should I change everything, or just simply add the. dsdt in patched folder, keeping my old setup?? 1 Link to comment Share on other sites More sharing options...
strakm39 Posted April 19, 2018 Share Posted April 19, 2018 OK MaLdOn here it is. Any help appreciated. https://www57.zippyshare.com/v/fFk7ZB2X/file.html Link to comment Share on other sites More sharing options...
MaLd0n Posted April 19, 2018 Author Share Posted April 19, 2018 4 minutes ago, giacomoleopardo said: I noticed that you have changed a few things in config, kext etc...Should I change everything, or just simply add the. dsdt in patched folder, keeping my old setup?? replace full clover folder 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 19, 2018 Author Share Posted April 19, 2018 18 minutes ago, strakm39 said: OK MaLdOn here it is. Any help appreciated. https://www57.zippyshare.com/v/fFk7ZB2X/file.html intel wifi dont work touch, i think dont work too card reader, have a 3 party kext for it, for realtek, but only pci/pcie bus https://www.insanelymac.com/forum/forums/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/ Link to comment Share on other sites More sharing options...
strakm39 Posted April 19, 2018 Share Posted April 19, 2018 13 minutes ago, MaLd0n said: intel wifi dont work touch, i think dont work too card reader, have a 3 party kext for it, for realtek, but only pci/pcie bus https://www.insanelymac.com/forum/forums/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/ the only think i would like to get working is the microphone. Link to comment Share on other sites More sharing options...
Babiloe Posted April 19, 2018 Share Posted April 19, 2018 (edited) Hi mald0n I have a friend using X550VX asus notebook i7 -7700hq asus touchpad not i2c GTX950M - Intel UHD630 RTL8723BE Wireless LAN RTS5287 PCI-E Card Reader RT8111 PCI-E Gigabit Ethernet NIC Intel Skylake PCH-H - High Definition Audio Controller / REALTEK 255 i suppose VEN_10EC&DEV_0255 original DSDT https://drive.google.com/file/d/14CKSKgDQ_Q5NlzyvOIQMWnVNWcMR5XjE/view runme https://drive.google.com/file/d/1XieNseYj_KgaCwdq3gnPxZi_32Jn8vLk/view his patched dsdt and kext, 4 configuration config.plist only config.n70.plist worked, others stopped or restart. http://www.mediafire.com/file/le8y1y...OVERx550vx.zip Status: battery status power management not worked trackpad sudden move gesture not captured, via voodoops2 kext jack audio weird with voodoohda kext brightness via fn not worked via dsdt numlock not worked via voodoops2 kext Edited April 19, 2018 by Babiloe Link to comment Share on other sites More sharing options...
Recommended Posts