82 replies to this topic

[dm_webd]

DaxTsurugi, on Nov 4 2006, 06:17 PM, said:

Any suggestions on what I could do then? I have a 7900 GS[device id 0x0292].  This also seems to happen to a few other people I know, so I'm not alone.

I'm remaking the kext with a different method of finding the right entry, which doesn't require iterating the registry. That might help.

[FabricioGS]

  Yeaaaaah!!! Finally get my 7900GT working with QE/CI!!! Thanks a lot man, great work.

PS: I runned the installer: http://www.necnet.de...tit_1.0.pkg.zip

[katmail]

Can't wait for ATI

HIS today has launched the first PCI graphics card based on an ATI X1300 3D chip. The passively cooled HIS X1300 silence Dual DVI 256MB PCI sports a dual link DVI connection, ATI's Avivo technology and H264/VC1 acceleration.

[ChuckDSanders]

ok I ran the natit installer and I didn't get the QE or CI support nor did I get the hibernate sleep support.  Am I missing something?  I have 10.4.7 patched to 10.4.8 and registering in the system profiler.  I have a leadtech nothing fancy 7800gtx pci e.  Do I need to install 10.4.8 fresh and then install the natit and that will solve everything?  Or am I missing something like I need to install the titan kext still and configure it?  I am sorry to be such a noob.

[FabricioGS]

ChuckDSanders, on Nov 6 2006, 12:33 AM, said:

ok I ran the natit installer and I didn't get the QE or CI support nor did I get the hibernate sleep support.  Am I missing something?  I have 10.4.7 patched to 10.4.8 and registering in the system profiler.  I have a leadtech nothing fancy 7800gtx pci e.  Do I need to install 10.4.8 fresh and then install the natit and that will solve everything?  Or am I missing something like I need to install the titan kext still and configure it?  I am sorry to be such a noob.

ChuckDSanders,

You need to be running 10.4.8 with kernel 8.8.1. TO see that digit on the console: uname -a

This will show you what version of the Darwin kernel you are running. It´s probably 8.4.1.

[ChuckDSanders]

Viper.Br, on Nov 6 2006, 02:49 AM, said:

ChuckDSanders,

You need to be running 10.4.8 with kernel 8.8.1. TO see that digit on the console: uname -a

This will show you what version of the Darwin kernel you are running. It´s probably 8.4.1.

Thank you, yeah you are right, so where does one get the 8.8.1 kernel?  I am assuming its a download or patch away from being good?  So after I update the kernel will everything else be kosher?  Thank you again

[REVENGE]

I think you can search yourself at torrent sites or check the IRC where it might already be listed.  Either way, please use The Genius Bar to get all the help you need with 8.8.1 kernels.  There are good guides and people knowledgeable about all variants of the kernel there.  Good luck!

[ChuckDSanders]

REVENGE, on Nov 6 2006, 05:26 AM, said:

I think you can search yourself at torrent sites or check the IRC where it might already be listed.  Either way, please use The Genius Bar to get all the help you need with 8.8.1 kernels.  There are good guides and people knowledgeable about all variants of the kernel there.  Good luck!

Ok I am downloading the JAS 10.4.8 ISO, does that have the necessary  Kernel provided I do a fresh install?

[VN Man]

There is no need to download the whole ISO, you only need the new kernel and the needed kext. Make for smaller downloads....Don't forget to update to latest 10.4.8 from Apple...

Atleast it work for me...Mind I have ATI card but to upgrade to 10.4.8 with 8.8.1 only need the above files and nothing more...

[lord_muad_dib]

i have problems with my 6800 ultra

id 0x00f910de

the kernel panics if i leave geforce.kext in extensions folder

what do i need to do/edit?

thx for your help

[jester1o1]

you have to edit the Geforce.kext plist to have only your vid cards id.  other wise it matches to the other nvidia gear in your pc and causes a kernel panic (like your sata controller etc).

[lord_muad_dib]

in the plist there's already another id with this form 0x000010de&0xfff0ffff

i have to modify it this way? 0x00f910de&0xfff0ffff

or 0x00f910de;0xfff0ffff

or 0x00f910de&amp

or 0x00f910de

?

thx jester!

[CoolBits]

0x00f910de

Is ok...

[vassalle]

BugsBunny, on Nov 4 2006, 04:01 AM, said:

After installing Titan or Natiti.kext your System does not restart properly? Simply run your hackint0sh install DVD, go into Disk Utility and repair permissions from DVD, that fixed the restart bug here.

hey bugs,

Thanks for the tip. but which install dvd? the 10.4.8 or the 10.4.6? i heard that the 10.4.8 diskutil is corrupted.

EDIT: tried and no go here. specs are as below. just change the 6600GT to a 6800. my setup had always had the reboot problem, even  when using 10.4.6. remember i had to edit the kernel using the hex editor back then to make it boot. Guess my reboot problem is not titan related then.

[RënKästle]

I Have Mac OSx 10.4.6 Goatsecx Installed, Today i install the Driver with The installer and...

The Login window Doesnt Load :S

Somebody can Help me?

Sorry for my bad english... :$

[jester1o1]

You Have to use the NEW KERNEL.  That is - install the JAS 10.4.8 Dvd.  without it you will get unpredictable results (ie: Kernel Panics).

Perhaps those folks making an installer should do a uname as part of the process?  Hopefully that will stop this fscking question being asked a billion more times.

[alienbiker99]

it will work with the .4 kernel IF and ONLY IF you have the 4.8 kexts

[RënKästle]

Can i install only the kernel? :S