Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
29,866 posts in this topic

Recommended Posts

mhaeuser
mhaeuser
Posted
Posted

Jump start uses ApplePartitionInfo proto to determine information to do jump, so thats why it doesn't work properly "OOB" due to Clover doesn't have such proto.

Happy to trade EdkPartition IDB + reverse for ApfsJumpstart IDB (+ reverse) :P

  • Like 1
Link to comment
Share on other sites
apianti
apianti
Posted
Posted

hello clover users.

 

has anyone nehalem cpu?

 

ex i7 870 or i5 750.

or gulftown etc

 

i need clover log. if has these cpu, please upload clover log here. thanks in advance

 

Not all Nehalem CPUs use QPI so it must be specific ones, also I discovered that some other newer CPUs that support multi-package configuration also use QPI in addition to DMI.

Here's a list of all CPUs that support QPI (not necessarily used though because after Westmere, some cores still used QPI but did not expose the interface):

 

From Nehalem: Beckton, Gainestown, Bloomfield, and Jasper Forest that start with LC5 or EC5. 

From Westmere: Westmere-EX, Westmere-EP, and Gulftown.

 

Should be noted that after Westmere microarchitecture, that all intel CPUs use DMI and only use QPI to communicate between CPU packages in multi-package configurations:

 

From SB: Sandy Bridge-EN and Sandy Bridge-EP.

From IB: Ivy Bridge-EX, some Ivy Bridge-EP, and some Ivy Bridge-EN.

From Haswell: Haswell E7-* and Haswell E5-*

From Broadwell: Broadwell-EX.

  • Like 2
Link to comment
Share on other sites
Moorre
Moorre
Posted
Posted

hello clover users.

 

has anyone nehalem cpu?

 

ex i7 870 or i5 750.

or gulftown etc

 

i need clover log. if has these cpu, please upload clover log here. thanks in advance

Hi From i7 975XE:

 

 

0:100  0:100  MemLog inited, TSC freq: 3330965502
0:100  0:000  LegacyRegion2: Chipset/proc: 0x34058086
0:100  0:000   Core i7 processors (PAM 0x40-0x47)
0:100  0:000   Test PAM1=(0x41=11, 0x5a=00, 0x81=0D, 0x91=61) at chipset 34058086
0:100  0:000  , Install = Success
0:110  0:010  BiosVideoDriverBindingStart!
0:111  0:000  BiosVideoCheckForVbe
0:111  0:000  EdidOverride not found
0:138  0:027   Edid1+
0:138  0:000   found Detail Timing 1920x1080
0:138  0:000   found Detail Timing 1360x768
0:165  0:027   Edid0+
0:165  0:000   found Detail Timing 1920x1080
0:165  0:000  ... already present
0:165  0:000   found Detail Timing 1360x768
0:165  0:000  ... already present
0:170  0:004     0 1152x864 attr=BB - ok, edid+, working, highest, pref=0
0:170  0:000     1 1280x960 attr=BB - ok, edid+, working, highest, pref=1
0:170  0:000     2 640x480 attr=BB - ok, edid+, 640x480, working
0:170  0:000     3 800x600 attr=BB - ok, edid+, 800x600, working
0:171  0:000     4 1024x768 attr=BB - ok, edid+, 1024x768, working
0:171  0:000     5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5
0:171  0:000     6 1400x1050 attr=BB - ok, edid-
0:174  0:002  BV new mode: 5 1280x1024
0:339  0:165   SetMode pref 5 (5) = Success
0:509  0:169  Found supported controller for BiosBlockIO class=010601
0:509  0:000  Int13Extensions: INT 13 41 DL=80 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=80 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = 976773167
0:509  0:000  Int13Extensions: INT 13 41 DL=81 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=81 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:509  0:000  Int13Extensions: INT 13 41 DL=82 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=82 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:509  0:000  Int13Extensions: INT 13 41 DL=83 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=83 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:510  0:000  Int13Extensions: INT 13 41 DL=84 : CF=0 BX=AA55 CX=0005
0:510  0:000  GetDriveParameters: INT 13 48 DL=84 : CF=0 AH=00
0:510  0:000  BlockSize = 512  LastBlock = -387940242
0:510  0:000  Int13Extensions: INT 13 41 DL=85 : CF=0 BX=AA55 CX=0005
0:510  0:000  GetDriveParameters: INT 13 48 DL=85 : CF=0 AH=00
0:510  0:000  BlockSize = 512  LastBlock = 1250263727
1:808  1:297  
1:808  0:000  Now is 21.6.2017,  23:37:20 (GMT)
1:808  0:000  Starting Clover revision: 4097 on CLOVER EFI
1:808  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.3.3]
1:808  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000) @DF453A98
1:808  0:000  SelfDirPath = \EFI\CLOVER
1:808  0:000  === [ Get Smbios ] ========================================
1:808  0:000  Type 16 Index = 0
1:808  0:000  Total Memory Slots Count = 6
1:808  0:000  Type 17 Index = 0
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 1
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 2
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 3
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 4
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank8/9 A4
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 5
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank10/11 A5
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Boot status=0
1:808  0:000  Running on: 'X58A-UD7' with board 'X58A-UD7'
1:808  0:000  === [ GetCPUProperties ] ==================================
1:808  0:000  CPU Vendor = 756E6547 Model=106A5
1:808  0:000   The CPU supported SSE4.1
1:808  0:000  The CPU supported turbo
1:808  0:000  BrandString = Intel(R) Core(TM) i7 CPU         975  @ 3.33GHz
1:808  0:000  FSBFrequency = 138 MHz, DMI FSBFrequency = 133 MHz, Corrected FSBFrequency = 133 MHz
1:808  0:000  Found QCLK_RATIO at bus 0x3F dev=3 funs=4
1:808  0:000  qpi read from PCI 19
1:808  0:000  qpimult 25
1:808  0:000  qpibusspeed 1666600kHz
1:808  0:000  MaxDiv/MinDiv: 25.0/12
1:808  0:000  Turbo: 26/26/26/27
1:808  0:000  Features: 0xBFEBFBFF
1:808  0:000  Threads: 8
1:808  0:000  Cores: 4
1:808  0:000  FSB: 33 MHz
1:808  0:000  CPU: 3466 MHz
1:808  0:000  TSC: 3466 MHz
1:808  0:000  PIS: 1666 MHz
1:808  0:000  === [ GetDevices ] ========================================
1:808  0:000  PCI (00|00:00.00) : 8086 3405 class=060000
1:808  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
1:808  0:000  PCI (00|01:00.00) : 1B4B 9128 class=010601
1:808  0:000  PCI (00|00:02.00) : 8086 3409 class=060400
1:808  0:000  PCI (00|02:00.00) : 1033 0194 class=0C0330
1:808  0:000  PCI (00|00:03.00) : 8086 340A class=060400
1:808  0:000  PCI (00|03:00.00) : 1002 6898 class=030000
1:808  0:000   - GFX: Model=ATI Radeon HD 5870 Series (ATI/AMD)
1:808  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000004
1:808  0:000  PCI (00|03:00.01) : 1002 AA50 class=040300
1:808  0:000   - HDMI Audio: 
1:808  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
1:808  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
1:808  0:000  PCI (00|00:11.00) : 8086 3427 class=080000
1:808  0:000  PCI (00|00:11.01) : 8086 3428 class=080000
1:808  0:000  PCI (00|00:13.00) : 8086 342D class=080020
1:808  0:000  PCI (00|00:14.00) : 8086 342E class=080000
1:808  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
1:808  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
1:808  0:000  PCI (00|00:15.00) : 8086 342F class=080020
1:808  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
1:808  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
1:808  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
1:808  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
1:808  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
1:808  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
1:808  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
1:808  0:000  PCI (00|05:00.00) : 197B 2363 class=010601
1:808  0:000  PCI (00|05:00.01) : 197B 2363 class=010185
1:808  0:000  PCI (00|00:1C.03) : 8086 3A46 class=060400
1:808  0:000  PCI (00|06:00.00) : 197B 2363 class=010601
1:808  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
1:808  0:000  PCI (00|07:00.00) : 10EC 8168 class=020000
1:808  0:000   - LAN: 0 Vendor=Realtek
1:808  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
1:808  0:000  PCI (00|08:00.00) : 10EC 8168 class=020000
1:808  0:000   - LAN: 1 Vendor=Realtek
1:809  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
1:809  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
1:809  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
1:809  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
1:809  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
1:809  0:000  PCI (00|09:06.00) : 104C 8024 class=0C0010
1:809  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
1:809  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
1:809  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
1:809  0:000  PCI (00|3F:00.00) : 8086 2C41 class=060000
1:809  0:000  PCI (00|3F:00.01) : 8086 2C01 class=060000
1:809  0:000  PCI (00|3F:02.00) : 8086 2C10 class=060000
1:809  0:000  PCI (00|3F:02.01) : 8086 2C11 class=060000
1:809  0:000  PCI (00|3F:03.00) : 8086 2C18 class=060000
1:809  0:000  PCI (00|3F:03.01) : 8086 2C19 class=060000
1:809  0:000  PCI (00|3F:03.04) : 8086 2C1C class=060000
1:809  0:000  PCI (00|3F:04.00) : 8086 2C20 class=060000
1:809  0:000  PCI (00|3F:04.01) : 8086 2C21 class=060000
1:809  0:000  PCI (00|3F:04.02) : 8086 2C22 class=060000
1:809  0:000  PCI (00|3F:04.03) : 8086 2C23 class=060000
1:809  0:000  PCI (00|3F:05.00) : 8086 2C28 class=060000
1:809  0:000  PCI (00|3F:05.01) : 8086 2C29 class=060000
1:809  0:000  PCI (00|3F:05.02) : 8086 2C2A class=060000
1:809  0:000  PCI (00|3F:05.03) : 8086 2C2B class=060000
1:809  0:000  PCI (00|3F:06.00) : 8086 2C30 class=060000
1:809  0:000  PCI (00|3F:06.01) : 8086 2C31 class=060000
1:809  0:000  PCI (00|3F:06.02) : 8086 2C32 class=060000
1:809  0:000  PCI (00|3F:06.03) : 8086 2C33 class=060000
1:809  0:000  === [ GetDefaultSettings ] ================================
1:809  0:000  Clover load options size = 0 bytes
1:845  0:036  EFI\CLOVER\OEM\X58A-UD7\config.plist loaded: Success
1:845  0:000  === [ GetListOfThemes ] ===================================
1:846  0:001  - [00]: embedded
1:848  0:002  - [00]: random
1:852  0:003  === [ Found config plists ] ===============================
1:852  0:000  - config.plist
1:852  0:000  - config1.plist
1:852  0:000  - config2.plist
1:852  0:000  - config3.plist
1:863  0:010  === [ GetEarlyUserSettings ] ==============================
1:863  0:000  timeout set to 20
1:863  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:863  0:000  KextsToPatch: 2 requested
1:863  0:000   - [00]: AppleTyMCEDriver (No Panic on MacPro4,1 - 5,1) :: BinPatch :: data len: 24
1:863  0:000   - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
1:863  0:000  Default theme: mimi black
1:863  0:000  === [ LoadDrivers ] =======================================
1:865  0:002  Loading AppleImageCodec-64.efi  status=Success
1:865  0:000  Loading AppleKeyAggregator-64.efi  status=Success
1:865  0:000  Loading AppleUITheme-64.efi  status=Success
1:865  0:000  Loading FirmwareVolume-64.efi  status=Success
1:865  0:000  Loading FSInject-64.efi  status=Success
1:865  0:000  Loading SMCHelper-64.efi  status=Success
1:867  0:001  Video bios patch requested or CustomEDID - forcing video reconnect
1:867  0:000  1 drivers needs connecting ...
1:867  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
1:867  0:000  Video driver loaded: disconnect Success
1:957  0:089  VideoBiosPatchNativeFromEdid:
1:957  0:000   Bios: ATI, MasterDataTables: 0xCA88C, std_vesa: 0xCA8D0, ati_mode_table: 0xCA8D4, mode_table_size: 0x428 BT_ATI_2
1:957  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
1:957  0:000   VideoBiosUnlock:  unlocked
1:957  0:000   Patching: BT_ATI_2
1:957  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)
1:957  0:000   mode 0 (320x200) patched to 1920x1080
1:957  0:000   VideoBiosLock: Success
1:966  0:008  BiosVideoDriverBindingStart!
1:966  0:000  BiosVideoCheckForVbe
1:966  0:000  EdidOverride not found
1:994  0:027   Edid1+
1:994  0:000   found Detail Timing 1920x1080
1:994  0:000   found Detail Timing 1360x768
2:021  0:027   Edid0+
2:021  0:000   found Detail Timing 1920x1080
2:021  0:000  ... already present
2:021  0:000   found Detail Timing 1360x768
2:021  0:000  ... already present
2:023  0:002     0 1920x1080 attr=BB - ok, edid+, working, highest, pref=0
2:026  0:002     1 1152x864 attr=BB - ok, edid+, working
2:026  0:000     2 1280x960 attr=BB - ok, edid+, working
2:026  0:000     3 640x480 attr=BB - ok, edid+, 640x480, working
2:027  0:000     4 800x600 attr=BB - ok, edid+, 800x600, working
2:027  0:000     5 1024x768 attr=BB - ok, edid+, 1024x768, working
2:027  0:000     6 1280x1024 attr=BB - ok, edid+, working
2:027  0:000     7 1400x1050 attr=BB - ok, edid-
2:030  0:002  BV new mode: 0 1920x1080
2:206  0:175   SetMode pref 0 (0) = Success
2:480  0:274  === [ InitScreen ] ========================================
2:480  0:000  SetScreenResolution: 1920x1080 - already set
2:480  0:000  Console modes reported: 4, available modes:
2:480  0:000   - [01]: 80x25
2:480  0:000   - [02]: 80x50
2:480  0:000   - [03]: 100x31
2:480  0:000   - [04]: 240x56 (current mode)
2:480  0:000  SetScreenResolution: 1920x1080 - already set
2:480  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000)
2:480  0:000  Using embedded font: Success
2:482  0:001  === [ GetMacAddress ] =====================================
2:482  0:000  === [ ScanSPD ] ===========================================
2:482  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success
2:482  0:000  SMBus CmdReg: 0x3
2:482  0:000  Scanning SMBus [8086:3A30], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
2:482  0:000  Slots to scan [8]...
2:483  0:000  SPD[0]: Type 11 @0x50
2:501  0:018  XMP Profile1: 10*1/8ns
2:501  0:000  Found module with XMP version 1.2
2:501  0:000  DDR speed 1333MHz
2:501  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050C010E0A0D0C08
2:502  0:000  SPD[1]: Type 11 @0x51
2:520  0:018  XMP Profile1: 10*1/8ns
2:520  0:000  Found module with XMP version 1.2
2:521  0:000  DDR speed 1333MHz
2:521  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=05030308050E0D01
2:521  0:000  SPD[2]: Type 11 @0x52
2:540  0:018  XMP Profile1: 10*1/8ns
2:540  0:000  Found module with XMP version 1.2
2:540  0:000  DDR speed 1333MHz
2:540  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=05030308050E0D00
2:540  0:000  SPD[3]: Type 11 @0x53
2:559  0:018  XMP Profile1: 10*1/8ns
2:559  0:000  Found module with XMP version 1.2
2:559  0:000  DDR speed 1333MHz
2:559  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050B010E0B080C08
2:559  0:000  SPD[4]: Type 11 @0x54
2:578  0:018  XMP Profile1: 10*1/8ns
2:578  0:000  Found module with XMP version 1.2
2:578  0:000  DDR speed 1333MHz
2:578  0:000  Slot: 4 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050D030803080C04
2:578  0:000  SPD[5]: Type 11 @0x55
2:597  0:018  XMP Profile1: 10*1/8ns
2:597  0:000  Found module with XMP version 1.2
2:597  0:000  DDR speed 1333MHz
2:597  0:000  Slot: 5 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050B010E0B0D0C08
2:597  0:000  === [ GetAcpiTablesList ] =================================
2:602  0:005  Get Acpi Tables List from RSDT:
2:602  0:000   - [00]: FACP  GBTUACPI len=116
2:602  0:000   - [01]: MSDM  GBTUACPI len=85
2:602  0:000   - [02]: HPET  GBTUACPI len=56
2:602  0:000   - [03]: MCFG  GBTUACPI len=60
2:602  0:000   - [04]: EUDS   len=1232
2:602  0:000   - [05]: TAMG  GBT   B0 len=3266
2:602  0:000   - [06]: APIC  GBTUACPI len=300
2:602  0:000   - [07]: SSDT  PPM RCM  len=13564
2:602  0:000  Calibrated TSC frequency =3330965502 =3330MHz
2:603  0:000  === [ GetUserSettings ] ===================================
2:603  0:000  USB FixOwnership: no
2:603  0:000  Dropping 4 tables:
2:603  0:000   - [00]: Drop table  signature="EUDS" (53445545)
2:603  0:000           - set table: 53445545,                0 to drop: yes
2:603  0:000   - [01]: Drop table  signature="TAMG" (474D4154)
2:603  0:000           - set table: 474D4154,                0 to drop: yes
2:603  0:000   - [02]: Drop table  signature="APIC" (43495041)
2:603  0:000           - set table: 43495041,                0 to drop: yes
2:603  0:000   - [03]: Drop table  signature="SSDT" (54445353) table-id="PPM RCM " (204D4352204D5050)
2:603  0:000           - set table: 54445353, 204D4352204D5050 to drop: yes
2:603  0:000   - final DSDT Fix mask=00000000
2:603  0:000  EnableC7: no
2:603  0:000  EnableC6: no
2:603  0:000  EnableC4: no
2:603  0:000  C3Latency: 17
2:603  0:000  smartUPS: present
2:603  0:000  CpuType: 701
2:603  0:000  Converted CustomUUID 063F8F09-A0E6-5BCE-8A27-BC0228A8E87F
2:609  0:006  ChassisType: 0x7
2:609  0:000  FirmwareFeatures: 0xC0001403
2:621  0:011  === [ ScanVolumes ] =======================================
2:621  0:000  Found 25 volumes with blockIO
2:621  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)
2:622  0:000          Result of bootcode detection: bootable unknown (legacy)
2:622  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)
2:623  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)
2:623  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)
2:623  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)
2:623  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)
2:624  0:000          Result of bootcode detection: bootable unknown (legacy)
2:624  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000)
2:625  0:001          Result of bootcode detection: bootable Clover (clover)
2:625  0:000          This is SelfVolume !!
2:625  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(2,GPT,92CB29A2-210D-46EC-ACB4-4F2F88DFA629,0x64028,0xBAA5208)
2:639  0:014  - [08]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(3,GPT,69F0690C-4007-4E78-9DA8-0803A8ED9214,0xBB49230,0x5D893A8)
2:651  0:011  - [09]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(4,GPT,E2305F62-F526-4C10-8B69-A1F042FA531D,0x118D25D8,0x135F20)
2:668  0:016  - [10]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(5,GPT,910FD7D2-3E45-4DA4-A461-D69046BEB392,0x11A084F8,0x1EAEA890)
2:674  0:006  - [11]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(6,GPT,527348A6-C580-488C-AFEE-0AC256BA88AF,0x30532D88,0x5CE1DB8)
2:696  0:021  - [12]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(7,GPT,86437B2B-F47A-4BB0-83C3-274ED1A61CBB,0x36254B40,0x40F14C8)
2:708  0:012  - [13]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(1,GPT,9F4F462B-0CA6-4701-95AC-705B256E899F,0x28,0x64000)
2:709  0:000          Result of bootcode detection: bootable unknown (legacy)
2:711  0:002  - [14]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(2,GPT,AD1EDBDA-209B-42B8-8E87-CFF714D4B211,0x64028,0xE8D64860)
2:711  0:000  - [15]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)\HD(1,GPT,66BBF179-638D-492B-9EFF-8D2EC2964ACA,0x28,0x64000)
2:712  0:000          Result of bootcode detection: bootable unknown (legacy)
2:712  0:000  - [16]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)\HD(2,GPT,52B19D49-8419-4357-BBC0-443462A7DD4C,0x64028,0xE8D64860)
2:712  0:000  - [17]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)\HD(1,GPT,F08AF7B6-AB88-4A6E-BEFD-31005E5A0A74,0x28,0x64000)
2:713  0:000          Result of bootcode detection: bootable unknown (legacy)
2:713  0:000  - [18]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)\HD(2,GPT,1B74CEEA-F3FA-476C-BD2C-1B74063B901D,0x64028,0xE8D64860)
2:714  0:000  - [19]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)\HD(1,GPT,B0F7694A-1518-4C1A-B6A3-C97D1B971F96,0x28,0x64000)
2:714  0:000          Result of bootcode detection: bootable unknown (legacy)
2:716  0:002  - [20]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)\HD(2,GPT,365367AA-B4F2-45D3-B5A5-7A3349D6A989,0x64028,0xE8D64020)
2:717  0:000  - [21]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(1,GPT,CAD4E0E4-90B6-492A-84F3-253AABB6A3BA,0x28,0x64000)
2:718  0:000          Result of bootcode detection: bootable Clover (clover)
2:739  0:021  - [22]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(2,GPT,24EFF662-2683-4FF7-8DFA-F4D3730029B2,0x2F34EF8,0x144C08F8)
2:740  0:000  - [23]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(3,GPT,E4FFE22B-B4DD-4C09-A08D-648A9587E890,0x173F57F0,0x135F20)
2:741  0:000  - [24]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(4,GPT,35FF94A6-7CF7-462C-BC5E-57BEDD8341DB,0x1752B710,0x332ECB78)
3:067  0:326  Loading nvram.plist from Vol 'EFI' - loaded, size=2090
3:105  0:037  === [ PutNvramPlistToRtVars ] =============================
3:105  0:000   Adding Key: Clover.BackupDirOnDestVol: Size = 3, Data: 59 65 73 
3:105  0:000   Adding Key: Clover.KeepBackupLimit: Size = 3, Data: 31 30 30 
3:105  0:000   Adding Key: Clover.LogLineCount: Size = 4, Data: 33 30 30 30 
3:105  0:000   Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B 
3:105  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
3:105  0:000   Adding Key: SystemAudioVolume: Size = 1, Data: 10 
3:105  0:000   Adding Key: SystemAudioVolumeDB: Size = 1, Data: D2 
3:105  0:000   Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 32 E0 89 04 00 00 00 00 10 3D F4 B7 E2 F0 3E 4C 
3:105  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
3:105  0:000   Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 
3:105  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 11 
3:105  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
3:105  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
3:105  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 02 C0 07 00 
3:105  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
3:105  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
3:105  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
3:105  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6B 35 00 66 00 00 00 00 
3:105  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 01 39 0F 00 00 11 
3:105  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
3:105  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6B 35 00 66 00 00 00 00 
3:105  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
3:105  0:000   Adding Key: fmm-computer-name: Size = 18, Data: 4D 61 63 20 50 72 6F C2 A0 E2 80 94 20 53 74 65 76 65 
3:105  0:000   Adding Key: platform-uuid: Size = 16, Data: 06 3F 8F 09 A0 E6 5B CE 8A 27 BC 02 28 A8 E8 7F 
3:105  0:000   Adding Key: prev-lang:kbd: Size = 4, Data: 72 75 3A 30 
3:105  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
3:105  0:000  === [ InitTheme ] =========================================
3:105  0:000   using embedded theme
3:106  0:000  Using embedded font: Success
3:106  0:000  Choosing theme <null string>
3:106  0:000  after NVRAM boot-args=-v -lilubeta -alcbeta
3:106  0:000  === [ Dump SMC keys from NVRAM ] ==========================
3:106  0:000  found AppleSMC protocol
3:106  0:000  === [ ScanLoader ] ========================================
3:106  0:000  - [06]: 'EFI'
3:130  0:024  - [07]: 'Capt'
3:214  0:083          AddLoaderEntry for Volume Name=Capt
3:251  0:037      Check if volume Is Hibernated:
3:251  0:000      Check sleep image 'by signature':
3:320  0:069      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:321  0:000      SleepImage name from pref: ImageVolume = 'Capt', ImageName = '\private\var\vm\sleepimage'
3:357  0:036      sleepimage not found -> Not Found
3:357  0:000      hibernated: no - sign
3:357  0:000  Icon 17 decoded, pointer DEB15218
3:358  0:000  - [08]: 'HS'
3:413  0:054          AddLoaderEntry for Volume Name=HS
3:437  0:024      Check if volume Is Hibernated:
3:437  0:000      Check sleep image 'by signature':
3:507  0:069      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
3:507  0:000      using default sleep image name = \private\var\vm\sleepimage
3:591  0:083      sleepimage not found -> Not Found
3:591  0:000      hibernated: no - sign
3:591  0:000  - [09]: 'Recovery HD'
3:608  0:016          AddLoaderEntry for Volume Name=Recovery HD
3:614  0:005  Icon 20 decoded, pointer 0
3:614  0:000          [!] Icon 20: Text <recovery> rendered
3:614  0:000  - [10]: 'Empty'
3:615  0:000  - [11]: 'Snow Leopard HD 10.6.8'
3:655  0:040          AddLoaderEntry for Volume Name=Snow Leopard HD 10.6.8
3:681  0:025      Check if volume Is Hibernated:
3:681  0:000      Check sleep image 'by signature':
3:732  0:051      using default sleep image name = \private\var\vm\sleepimage
3:752  0:019      sleepimage not found -> Not Found
3:752  0:000      hibernated: no - sign
3:752  0:000  - [12]: 'M2'
3:814  0:061          AddLoaderEntry for Volume Name=M2
3:866  0:051      Check if volume Is Hibernated:
3:866  0:000      Check sleep image 'by signature':
3:930  0:063      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:930  0:000      SleepImage name from pref: ImageVolume = 'M2', ImageName = '\private\var\vm\sleepimage'
3:990  0:059      sleepimage not found -> Not Found
3:990  0:000      hibernated: no - sign
3:990  0:000  - [13]: 'EFI'
3:990  0:000  - [14]: '2 UNIT 2T'
3:991  0:000  - [15]: 'EFI'
3:991  0:000  - [16]: '4 UNIT 2T'
3:992  0:000  - [17]: 'EFI'
3:992  0:000  - [18]: '1 UNIT 2T'
3:993  0:000  - [19]: 'EFI'
3:993  0:000  - [20]: '5 UNIT 2T'
3:994  0:000  - [21]: 'EFI'
4:026  0:032  - [22]: 'Sierra'
4:078  0:052          AddLoaderEntry for Volume Name=Sierra
4:109  0:030      Check if volume Is Hibernated:
4:109  0:000      Check sleep image 'by signature':
4:156  0:046      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
4:156  0:000      using default sleep image name = \private\var\vm\sleepimage
4:194  0:038      sleepimage not found -> Not Found
4:194  0:000      hibernated: no - sign
4:195  0:000  - [23]: 'Recovery HD'
4:196  0:000          AddLoaderEntry for Volume Name=Recovery HD
4:210  0:014  - [24]: 'DATA'
4:235  0:025  === [ AddCustomTool ] =====================================
4:235  0:000  Icon 8 decoded, pointer DB3B8498
4:271  0:036  found tool \EFI\CLOVER\tools\Shell64U.efi
4:271  0:000  Checking EFI partition Volume 6 for Clover
4:271  0:000   Found Clover
4:271  0:000  Icon 2 decoded, pointer DB2B8F18
4:271  0:000  Icon 1 decoded, pointer DEB13F98
4:271  0:000  Icon 0 decoded, pointer DB2B8818
4:271  0:000  Icon 5 decoded, pointer DB2B8798
4:271  0:000  Icon 6 decoded, pointer DB2B8718
4:272  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
4:272  0:000  Default boot entry not found
4:272  0:000  DefaultIndex=-1 and MainMenu.EntryCount=13
4:272  0:000  Icon 21 decoded, pointer DB2B8618
4:531  0:258  Icon 22 decoded, pointer DB2B8698
4:531  0:000  Icon 23 decoded, pointer DB2B8518
4:563  0:032  Icon 11 decoded, pointer DB2B8098
4:564  0:000  GUI ready
79:972  75:408   enter menu with LoadOptions: -v -lilubeta -alcbeta
79:972  0:000   and with FlagsBits = 0x2
85:544  5:571   exit menu with LoadOptions: -v -lilubeta -alcbeta keepsyms=1
85:544  0:000   get FlagsBits = 0x2
85:544  0:000   boot with args: -v -lilubeta -alcbeta keepsyms=1
85:544  0:000  BootVariable of the entry is empty
85:544  0:000  === [ StartLoader ] =======================================
85:544  0:000  Finally: Bus=133238kHz CPU=3331MHz
85:544  0:000  Loading boot.efi  status=Success
85:952  0:408  GetOSVersion: 10.13 (17A291j)
85:953  0:001  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
85:953  0:000  Filtering KextPatches:
85:953  0:000   - [00]: AppleTyMCEDriver (No Panic on MacPro4,1 - 5,1) :: BinPatch :: [OS: 10.13 | MatchOS: All | MatchBuild: All] ==> allowed
85:953  0:000   - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13 | MatchOS: All | MatchBuild: All] ==> allowed
85:953  0:000  === [ PatchSmbios ] =======================================
85:953  0:000  insert table 9 for dev 0:0
85:953  0:000  insert table 9 for dev 0:1
85:953  0:000  insert table 9 for dev 0:0
85:953  0:000  insert table 9 for dev 6:0
85:954  0:000  Trusting SMBIOS...
85:954  0:000  Channels: 3
85:954  0:000  Interleave: 0 2 4 1 3 5 6 8 10 7 9 11 12 14 16 13 15 17 18 20 22 19 21 23
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 0 => 0 0:
85:954  0:000   DIMM1 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 1 => 2 2:
85:954  0:000   DIMM2 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 2 => 4 4:
85:954  0:000   DIMM3 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 3 => 1 1:
85:954  0:000   DIMM4 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 4 => 3 3:
85:954  0:000   DIMM5 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 5 => 5 5:
85:954  0:000   DIMM6 1333MHz 4096MB
85:954  0:000  mTotalSystemMemory = 24576
85:954  0:000  NumberOfMemoryDevices = 6
85:954  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
85:954  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000
85:954  0:000  Type20[2]->End = 0xBFFFFF, Type17[2] = 0x6000
85:954  0:000  Type20[3]->End = 0xFFFFFF, Type17[3] = 0xA000
85:954  0:000  Type20[4]->End = 0x13FFFFF, Type17[4] = 0xF000
85:954  0:000  Type20[5]->End = 0x17FFFFF, Type17[5] = 0x15000
85:954  0:000  === [ PatchACPI ] =========================================
85:954  0:000  RSDT 0xDFEE1040
85:954  0:000  FADT from RSDT: 0xDFEE10C0
85:954  0:000  Xsdt is not found! Creating new one
85:954  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
85:954  0:000  RsdPointer Acpi 2.0 installed
85:954  0:000  RSDT entries = 8
85:954  0:000  Xsdt reallocation done
85:954  0:000  old FADT length=74
85:954  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\OEM\X58A-UD7\ACPI\patched\DSDT_21.aml
85:974  0:019  Apply DsdtFixMask=0x00000000
85:974  0:000     drop _DSM mask=0xFFFF
85:974  0:000  === [ FixBiosDsdt ] =======================================
85:974  0:000  USBADR[0] = 0x20000 and PCIe = 0x0
85:974  0:000  VideoCard devID=0x68981002
85:974  0:000  DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0
85:974  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
85:974  0:000  USBADR[2] = 0x1A0001 and PCIe = 0xFFFE
85:974  0:000  USBADR[3] = 0x1A0002 and PCIe = 0xFFFE
85:974  0:000  USBADR[4] = 0x1A0007 and PCIe = 0xFFFE
85:987  0:012  USBADR[5] = 0x1D0000 and PCIe = 0xFFFE
85:987  0:000  USBADR[6] = 0x1D0001 and PCIe = 0xFFFE
85:987  0:000  USBADR[7] = 0x1D0002 and PCIe = 0xFFFE
85:987  0:000  USBADR[8] = 0x1D0007 and PCIe = 0xFFFE
85:987  0:000  first CPU found at 62 offset 65
85:987  0:000  score candidate at 27
85:987  0:000  score inserted in acpi_cpu_score _SB_
85:987  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _SB_
85:987  0:000  Found PCIROOTUID = 0
85:987  0:000  === [ ACPIDropTables ] ====================================
85:987  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=PPM RCM  Length=13564
85:987  0:000   Xsdt has tables count=8
85:987  0:000   Table: SSDT  PPM RCM   13564 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=APIC TableID=GBTUACPI Length=300
85:987  0:000   Xsdt has tables count=7
85:987  0:000   Table: APIC  GBTUACPI  300 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=TAMG TableID=GBT   B0 Length=3266
85:987  0:000   Xsdt has tables count=6
85:987  0:000   Table: TAMG  GBT   B0  3266 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=EUDS TableID= Length=1232
85:987  0:000   Xsdt has tables count=5
85:987  0:000   Table: EUDS    1232 dropped
85:987  0:000  === [ PatchAllSSDT ] ======================================
85:987  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
85:987  0:000   Xsdt has tables count=4
85:987  0:000  === [ ACPIPatchedAML ] ====================================
85:987  0:000  Unsorted
85:987  0:000  Inserting SSDT-2.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:006  0:019  Disabled: SSDT-1.aml, skip
86:006  0:000  Inserting SSDT.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:008  0:001  Inserting APIC.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:008  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
86:008  0:000  === [ RestSetup macOS ] ===================================
86:008  0:000  EdidDiscovered size=128
86:008  0:000  ------- EDID Table
86:008  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D
86:008  0:000  010  |  59  06  00  00  00  00  2D  13  01  03
86:008  0:000  020  |  80  10  09  78  0A  EE  91  A3  54  4C
86:008  0:000  030  |  99  26  0F  50  54  BD  EF  80  71  4F
86:008  0:000  040  |  81  00  81  40  81  80  95  00  95  0F
86:008  0:000  050  |  B3  00  A9  40  02  3A  80  18  71  38
86:008  0:000  060  |  2D  40  58  2C  45  00  A0  5A  00  00
86:008  0:000  070  |  00  1E  66  21  50  B0  51  00  1B  30
86:008  0:000  080  |  40  70  36  00  A0  5A  00  00  00  1E
86:008  0:000  090  |  00  00  00  FD  00  18  4B  1A  51  17
86:008  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
86:008  0:000  110  |  00  FC  00  53  41  4D  53  55  4E  47
86:008  0:000  120  |  0A  20  20  20  20  20  01  3A
86:008  0:000  Framebuffer @0xE0000000  MMIO @0xFB5C0000 I/O Port @0x0000BE00 ROM Addr @0x00000000
86:008  0:000  PCI region 1 = 0x00000000, region3 = 0x00000000, region5 = 0x00000000
86:008  0:000  BIOS_0_SCRATCH=0x00000004, 1=0x000000FF, 2=0x00000000, 3=0x00000000, 4=0x00000000, 5=0x00000000, 6=0x00000000
86:009  0:000  RADEON_CRTC2_GEN_CNTL == 0x00000000
86:009  0:000   card posted because CONFIG_MEMSIZE=0x400
86:009  0:000  ATI card POSTed, 
86:009  0:000  Set VRAM for Cypress =1024Mb
86:009  0:000  ATI: get_vram_size returned 0x40000000
86:009  0:000  ATI Radeon EVERGREEN+ family
86:009  0:000  Users config name Uakari
86:009  0:000  (AtiPorts) Nr of ports set to: 4
86:009  0:000  ATI Cypress ATI Radeon HD 5870 Series 1024MB (Uakari) [1002:6898] (subsys [1002:0B00]):: PcieRoot(0x0)\Pci(0x3,0x0)\Pci(0x0,0x0)
86:021  0:012   codec not detected
86:021  0:000  stringlength = 3682
86:022  0:000  CurrentMode: Width=1920 Height=1080
86:022  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DF453718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DF453718
86:052  0:030  Use origin smbios table type 1 guid.
86:053  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\X58A-UD7\kexts\Other
86:053  0:000    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\CPUSensors.kext
86:058  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\FakeSMC.kext
86:063  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\BluetoothDevBroadcomInjector.kext
86:072  0:009    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\GPUSensors.kext
86:079  0:007    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\LPCSensors.kext
86:124  0:045    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\AppleALC.kext
86:170  0:045      Extra PlugIn kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
86:281  0:111    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\JMicron36xATA.kext
86:295  0:014    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\Lilu.kext
86:307  0:011  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\X58A-UD7\kexts\10.13
86:312  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\10.13\RealtekRTL8111.kext
86:328  0:015  SetStartupDiskVolume:
86:328  0:000    * Volume: 'HS'
86:328  0:000    * LoaderPath: '<null string>'
86:328  0:000    * DevPath: HS
86:328  0:000    * GUID = 69F0690C-4007-4E78-9DA8-0803A8ED9214
86:328  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>69F0690C-4007-4E78-9DA8-0803A8ED9214</string></dict></dict></dict></array>
86:328  0:000  Custom boot screen not used because entry has unset use graphics

 

 

  • Like 2
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Hi From i7 975XE:

 

 

0:100  0:100  MemLog inited, TSC freq: 3330965502
0:100  0:000  LegacyRegion2: Chipset/proc: 0x34058086
0:100  0:000   Core i7 processors (PAM 0x40-0x47)
0:100  0:000   Test PAM1=(0x41=11, 0x5a=00, 0x81=0D, 0x91=61) at chipset 34058086
0:100  0:000  , Install = Success
0:110  0:010  BiosVideoDriverBindingStart!
0:111  0:000  BiosVideoCheckForVbe
0:111  0:000  EdidOverride not found
0:138  0:027   Edid1+
0:138  0:000   found Detail Timing 1920x1080
0:138  0:000   found Detail Timing 1360x768
0:165  0:027   Edid0+
0:165  0:000   found Detail Timing 1920x1080
0:165  0:000  ... already present
0:165  0:000   found Detail Timing 1360x768
0:165  0:000  ... already present
0:170  0:004     0 1152x864 attr=BB - ok, edid+, working, highest, pref=0
0:170  0:000     1 1280x960 attr=BB - ok, edid+, working, highest, pref=1
0:170  0:000     2 640x480 attr=BB - ok, edid+, 640x480, working
0:170  0:000     3 800x600 attr=BB - ok, edid+, 800x600, working
0:171  0:000     4 1024x768 attr=BB - ok, edid+, 1024x768, working
0:171  0:000     5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5
0:171  0:000     6 1400x1050 attr=BB - ok, edid-
0:174  0:002  BV new mode: 5 1280x1024
0:339  0:165   SetMode pref 5 (5) = Success
0:509  0:169  Found supported controller for BiosBlockIO class=010601
0:509  0:000  Int13Extensions: INT 13 41 DL=80 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=80 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = 976773167
0:509  0:000  Int13Extensions: INT 13 41 DL=81 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=81 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:509  0:000  Int13Extensions: INT 13 41 DL=82 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=82 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:509  0:000  Int13Extensions: INT 13 41 DL=83 : CF=0 BX=AA55 CX=0005
0:509  0:000  GetDriveParameters: INT 13 48 DL=83 : CF=0 AH=00
0:509  0:000  BlockSize = 512  LastBlock = -387938129
0:510  0:000  Int13Extensions: INT 13 41 DL=84 : CF=0 BX=AA55 CX=0005
0:510  0:000  GetDriveParameters: INT 13 48 DL=84 : CF=0 AH=00
0:510  0:000  BlockSize = 512  LastBlock = -387940242
0:510  0:000  Int13Extensions: INT 13 41 DL=85 : CF=0 BX=AA55 CX=0005
0:510  0:000  GetDriveParameters: INT 13 48 DL=85 : CF=0 AH=00
0:510  0:000  BlockSize = 512  LastBlock = 1250263727
1:808  1:297  
1:808  0:000  Now is 21.6.2017,  23:37:20 (GMT)
1:808  0:000  Starting Clover revision: 4097 on CLOVER EFI
1:808  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.3.3]
1:808  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000) @DF453A98
1:808  0:000  SelfDirPath = \EFI\CLOVER
1:808  0:000  === [ Get Smbios ] ========================================
1:808  0:000  Type 16 Index = 0
1:808  0:000  Total Memory Slots Count = 6
1:808  0:000  Type 17 Index = 0
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 1
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 2
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 3
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 4
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank8/9 A4
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Type 17 Index = 5
1:808  0:000  SmbiosTable.Type17->Speed = 400MHz
1:808  0:000  SmbiosTable.Type17->Size = 4096MB
1:808  0:000  SmbiosTable.Type17->Bank/Device = Bank10/11 A5
1:808  0:000  SmbiosTable.Type17->Vendor =  
1:808  0:000  SmbiosTable.Type17->SerialNumber =  
1:808  0:000  SmbiosTable.Type17->PartNumber =  
1:808  0:000  Boot status=0
1:808  0:000  Running on: 'X58A-UD7' with board 'X58A-UD7'
1:808  0:000  === [ GetCPUProperties ] ==================================
1:808  0:000  CPU Vendor = 756E6547 Model=106A5
1:808  0:000   The CPU supported SSE4.1
1:808  0:000  The CPU supported turbo
1:808  0:000  BrandString = Intel(R) Core(TM) i7 CPU         975  @ 3.33GHz
1:808  0:000  FSBFrequency = 138 MHz, DMI FSBFrequency = 133 MHz, Corrected FSBFrequency = 133 MHz
1:808  0:000  Found QCLK_RATIO at bus 0x3F dev=3 funs=4
1:808  0:000  qpi read from PCI 19
1:808  0:000  qpimult 25
1:808  0:000  qpibusspeed 1666600kHz
1:808  0:000  MaxDiv/MinDiv: 25.0/12
1:808  0:000  Turbo: 26/26/26/27
1:808  0:000  Features: 0xBFEBFBFF
1:808  0:000  Threads: 8
1:808  0:000  Cores: 4
1:808  0:000  FSB: 33 MHz
1:808  0:000  CPU: 3466 MHz
1:808  0:000  TSC: 3466 MHz
1:808  0:000  PIS: 1666 MHz
1:808  0:000  === [ GetDevices ] ========================================
1:808  0:000  PCI (00|00:00.00) : 8086 3405 class=060000
1:808  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
1:808  0:000  PCI (00|01:00.00) : 1B4B 9128 class=010601
1:808  0:000  PCI (00|00:02.00) : 8086 3409 class=060400
1:808  0:000  PCI (00|02:00.00) : 1033 0194 class=0C0330
1:808  0:000  PCI (00|00:03.00) : 8086 340A class=060400
1:808  0:000  PCI (00|03:00.00) : 1002 6898 class=030000
1:808  0:000   - GFX: Model=ATI Radeon HD 5870 Series (ATI/AMD)
1:808  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000004
1:808  0:000  PCI (00|03:00.01) : 1002 AA50 class=040300
1:808  0:000   - HDMI Audio: 
1:808  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
1:808  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
1:808  0:000  PCI (00|00:11.00) : 8086 3427 class=080000
1:808  0:000  PCI (00|00:11.01) : 8086 3428 class=080000
1:808  0:000  PCI (00|00:13.00) : 8086 342D class=080020
1:808  0:000  PCI (00|00:14.00) : 8086 342E class=080000
1:808  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
1:808  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
1:808  0:000  PCI (00|00:15.00) : 8086 342F class=080020
1:808  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
1:808  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
1:808  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
1:808  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
1:808  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
1:808  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
1:808  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
1:808  0:000  PCI (00|05:00.00) : 197B 2363 class=010601
1:808  0:000  PCI (00|05:00.01) : 197B 2363 class=010185
1:808  0:000  PCI (00|00:1C.03) : 8086 3A46 class=060400
1:808  0:000  PCI (00|06:00.00) : 197B 2363 class=010601
1:808  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
1:808  0:000  PCI (00|07:00.00) : 10EC 8168 class=020000
1:808  0:000   - LAN: 0 Vendor=Realtek
1:808  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
1:808  0:000  PCI (00|08:00.00) : 10EC 8168 class=020000
1:808  0:000   - LAN: 1 Vendor=Realtek
1:809  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
1:809  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
1:809  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
1:809  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
1:809  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
1:809  0:000  PCI (00|09:06.00) : 104C 8024 class=0C0010
1:809  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
1:809  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
1:809  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
1:809  0:000  PCI (00|3F:00.00) : 8086 2C41 class=060000
1:809  0:000  PCI (00|3F:00.01) : 8086 2C01 class=060000
1:809  0:000  PCI (00|3F:02.00) : 8086 2C10 class=060000
1:809  0:000  PCI (00|3F:02.01) : 8086 2C11 class=060000
1:809  0:000  PCI (00|3F:03.00) : 8086 2C18 class=060000
1:809  0:000  PCI (00|3F:03.01) : 8086 2C19 class=060000
1:809  0:000  PCI (00|3F:03.04) : 8086 2C1C class=060000
1:809  0:000  PCI (00|3F:04.00) : 8086 2C20 class=060000
1:809  0:000  PCI (00|3F:04.01) : 8086 2C21 class=060000
1:809  0:000  PCI (00|3F:04.02) : 8086 2C22 class=060000
1:809  0:000  PCI (00|3F:04.03) : 8086 2C23 class=060000
1:809  0:000  PCI (00|3F:05.00) : 8086 2C28 class=060000
1:809  0:000  PCI (00|3F:05.01) : 8086 2C29 class=060000
1:809  0:000  PCI (00|3F:05.02) : 8086 2C2A class=060000
1:809  0:000  PCI (00|3F:05.03) : 8086 2C2B class=060000
1:809  0:000  PCI (00|3F:06.00) : 8086 2C30 class=060000
1:809  0:000  PCI (00|3F:06.01) : 8086 2C31 class=060000
1:809  0:000  PCI (00|3F:06.02) : 8086 2C32 class=060000
1:809  0:000  PCI (00|3F:06.03) : 8086 2C33 class=060000
1:809  0:000  === [ GetDefaultSettings ] ================================
1:809  0:000  Clover load options size = 0 bytes
1:845  0:036  EFI\CLOVER\OEM\X58A-UD7\config.plist loaded: Success
1:845  0:000  === [ GetListOfThemes ] ===================================
1:846  0:001  - [00]: embedded
1:848  0:002  - [00]: random
1:852  0:003  === [ Found config plists ] ===============================
1:852  0:000  - config.plist
1:852  0:000  - config1.plist
1:852  0:000  - config2.plist
1:852  0:000  - config3.plist
1:863  0:010  === [ GetEarlyUserSettings ] ==============================
1:863  0:000  timeout set to 20
1:863  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:863  0:000  KextsToPatch: 2 requested
1:863  0:000   - [00]: AppleTyMCEDriver (No Panic on MacPro4,1 - 5,1) :: BinPatch :: data len: 24
1:863  0:000   - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
1:863  0:000  Default theme: mimi black
1:863  0:000  === [ LoadDrivers ] =======================================
1:865  0:002  Loading AppleImageCodec-64.efi  status=Success
1:865  0:000  Loading AppleKeyAggregator-64.efi  status=Success
1:865  0:000  Loading AppleUITheme-64.efi  status=Success
1:865  0:000  Loading FirmwareVolume-64.efi  status=Success
1:865  0:000  Loading FSInject-64.efi  status=Success
1:865  0:000  Loading SMCHelper-64.efi  status=Success
1:867  0:001  Video bios patch requested or CustomEDID - forcing video reconnect
1:867  0:000  1 drivers needs connecting ...
1:867  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
1:867  0:000  Video driver loaded: disconnect Success
1:957  0:089  VideoBiosPatchNativeFromEdid:
1:957  0:000   Bios: ATI, MasterDataTables: 0xCA88C, std_vesa: 0xCA8D0, ati_mode_table: 0xCA8D4, mode_table_size: 0x428 BT_ATI_2
1:957  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
1:957  0:000   VideoBiosUnlock:  unlocked
1:957  0:000   Patching: BT_ATI_2
1:957  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)
1:957  0:000   mode 0 (320x200) patched to 1920x1080
1:957  0:000   VideoBiosLock: Success
1:966  0:008  BiosVideoDriverBindingStart!
1:966  0:000  BiosVideoCheckForVbe
1:966  0:000  EdidOverride not found
1:994  0:027   Edid1+
1:994  0:000   found Detail Timing 1920x1080
1:994  0:000   found Detail Timing 1360x768
2:021  0:027   Edid0+
2:021  0:000   found Detail Timing 1920x1080
2:021  0:000  ... already present
2:021  0:000   found Detail Timing 1360x768
2:021  0:000  ... already present
2:023  0:002     0 1920x1080 attr=BB - ok, edid+, working, highest, pref=0
2:026  0:002     1 1152x864 attr=BB - ok, edid+, working
2:026  0:000     2 1280x960 attr=BB - ok, edid+, working
2:026  0:000     3 640x480 attr=BB - ok, edid+, 640x480, working
2:027  0:000     4 800x600 attr=BB - ok, edid+, 800x600, working
2:027  0:000     5 1024x768 attr=BB - ok, edid+, 1024x768, working
2:027  0:000     6 1280x1024 attr=BB - ok, edid+, working
2:027  0:000     7 1400x1050 attr=BB - ok, edid-
2:030  0:002  BV new mode: 0 1920x1080
2:206  0:175   SetMode pref 0 (0) = Success
2:480  0:274  === [ InitScreen ] ========================================
2:480  0:000  SetScreenResolution: 1920x1080 - already set
2:480  0:000  Console modes reported: 4, available modes:
2:480  0:000   - [01]: 80x25
2:480  0:000   - [02]: 80x50
2:480  0:000   - [03]: 100x31
2:480  0:000   - [04]: 240x56 (current mode)
2:480  0:000  SetScreenResolution: 1920x1080 - already set
2:480  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000)
2:480  0:000  Using embedded font: Success
2:482  0:001  === [ GetMacAddress ] =====================================
2:482  0:000  === [ ScanSPD ] ===========================================
2:482  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success
2:482  0:000  SMBus CmdReg: 0x3
2:482  0:000  Scanning SMBus [8086:3A30], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
2:482  0:000  Slots to scan [8]...
2:483  0:000  SPD[0]: Type 11 @0x50
2:501  0:018  XMP Profile1: 10*1/8ns
2:501  0:000  Found module with XMP version 1.2
2:501  0:000  DDR speed 1333MHz
2:501  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050C010E0A0D0C08
2:502  0:000  SPD[1]: Type 11 @0x51
2:520  0:018  XMP Profile1: 10*1/8ns
2:520  0:000  Found module with XMP version 1.2
2:521  0:000  DDR speed 1333MHz
2:521  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=05030308050E0D01
2:521  0:000  SPD[2]: Type 11 @0x52
2:540  0:018  XMP Profile1: 10*1/8ns
2:540  0:000  Found module with XMP version 1.2
2:540  0:000  DDR speed 1333MHz
2:540  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=05030308050E0D00
2:540  0:000  SPD[3]: Type 11 @0x53
2:559  0:018  XMP Profile1: 10*1/8ns
2:559  0:000  Found module with XMP version 1.2
2:559  0:000  DDR speed 1333MHz
2:559  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050B010E0B080C08
2:559  0:000  SPD[4]: Type 11 @0x54
2:578  0:018  XMP Profile1: 10*1/8ns
2:578  0:000  Found module with XMP version 1.2
2:578  0:000  DDR speed 1333MHz
2:578  0:000  Slot: 4 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050D030803080C04
2:578  0:000  SPD[5]: Type 11 @0x55
2:597  0:018  XMP Profile1: 10*1/8ns
2:597  0:000  Found module with XMP version 1.2
2:597  0:000  DDR speed 1333MHz
2:597  0:000  Slot: 5 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-197.A00LF SerialNo=050B010E0B0D0C08
2:597  0:000  === [ GetAcpiTablesList ] =================================
2:602  0:005  Get Acpi Tables List from RSDT:
2:602  0:000   - [00]: FACP  GBTUACPI len=116
2:602  0:000   - [01]: MSDM  GBTUACPI len=85
2:602  0:000   - [02]: HPET  GBTUACPI len=56
2:602  0:000   - [03]: MCFG  GBTUACPI len=60
2:602  0:000   - [04]: EUDS   len=1232
2:602  0:000   - [05]: TAMG  GBT   B0 len=3266
2:602  0:000   - [06]: APIC  GBTUACPI len=300
2:602  0:000   - [07]: SSDT  PPM RCM  len=13564
2:602  0:000  Calibrated TSC frequency =3330965502 =3330MHz
2:603  0:000  === [ GetUserSettings ] ===================================
2:603  0:000  USB FixOwnership: no
2:603  0:000  Dropping 4 tables:
2:603  0:000   - [00]: Drop table  signature="EUDS" (53445545)
2:603  0:000           - set table: 53445545,                0 to drop: yes
2:603  0:000   - [01]: Drop table  signature="TAMG" (474D4154)
2:603  0:000           - set table: 474D4154,                0 to drop: yes
2:603  0:000   - [02]: Drop table  signature="APIC" (43495041)
2:603  0:000           - set table: 43495041,                0 to drop: yes
2:603  0:000   - [03]: Drop table  signature="SSDT" (54445353) table-id="PPM RCM " (204D4352204D5050)
2:603  0:000           - set table: 54445353, 204D4352204D5050 to drop: yes
2:603  0:000   - final DSDT Fix mask=00000000
2:603  0:000  EnableC7: no
2:603  0:000  EnableC6: no
2:603  0:000  EnableC4: no
2:603  0:000  C3Latency: 17
2:603  0:000  smartUPS: present
2:603  0:000  CpuType: 701
2:603  0:000  Converted CustomUUID 063F8F09-A0E6-5BCE-8A27-BC0228A8E87F
2:609  0:006  ChassisType: 0x7
2:609  0:000  FirmwareFeatures: 0xC0001403
2:621  0:011  === [ ScanVolumes ] =======================================
2:621  0:000  Found 25 volumes with blockIO
2:621  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)
2:622  0:000          Result of bootcode detection: bootable unknown (legacy)
2:622  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)
2:623  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)
2:623  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)
2:623  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)
2:623  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)
2:624  0:000          Result of bootcode detection: bootable unknown (legacy)
2:624  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,GPT,8F1AC6AC-AEF8-4DB8-A601-4784F651E344,0x28,0x64000)
2:625  0:001          Result of bootcode detection: bootable Clover (clover)
2:625  0:000          This is SelfVolume !!
2:625  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(2,GPT,92CB29A2-210D-46EC-ACB4-4F2F88DFA629,0x64028,0xBAA5208)
2:639  0:014  - [08]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(3,GPT,69F0690C-4007-4E78-9DA8-0803A8ED9214,0xBB49230,0x5D893A8)
2:651  0:011  - [09]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(4,GPT,E2305F62-F526-4C10-8B69-A1F042FA531D,0x118D25D8,0x135F20)
2:668  0:016  - [10]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(5,GPT,910FD7D2-3E45-4DA4-A461-D69046BEB392,0x11A084F8,0x1EAEA890)
2:674  0:006  - [11]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(6,GPT,527348A6-C580-488C-AFEE-0AC256BA88AF,0x30532D88,0x5CE1DB8)
2:696  0:021  - [12]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(7,GPT,86437B2B-F47A-4BB0-83C3-274ED1A61CBB,0x36254B40,0x40F14C8)
2:708  0:012  - [13]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(1,GPT,9F4F462B-0CA6-4701-95AC-705B256E899F,0x28,0x64000)
2:709  0:000          Result of bootcode detection: bootable unknown (legacy)
2:711  0:002  - [14]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(2,GPT,AD1EDBDA-209B-42B8-8E87-CFF714D4B211,0x64028,0xE8D64860)
2:711  0:000  - [15]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)\HD(1,GPT,66BBF179-638D-492B-9EFF-8D2EC2964ACA,0x28,0x64000)
2:712  0:000          Result of bootcode detection: bootable unknown (legacy)
2:712  0:000  - [16]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,82)\HD(2,GPT,52B19D49-8419-4357-BBC0-443462A7DD4C,0x64028,0xE8D64860)
2:712  0:000  - [17]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)\HD(1,GPT,F08AF7B6-AB88-4A6E-BEFD-31005E5A0A74,0x28,0x64000)
2:713  0:000          Result of bootcode detection: bootable unknown (legacy)
2:713  0:000  - [18]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,83)\HD(2,GPT,1B74CEEA-F3FA-476C-BD2C-1B74063B901D,0x64028,0xE8D64860)
2:714  0:000  - [19]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)\HD(1,GPT,B0F7694A-1518-4C1A-B6A3-C97D1B971F96,0x28,0x64000)
2:714  0:000          Result of bootcode detection: bootable unknown (legacy)
2:716  0:002  - [20]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,84)\HD(2,GPT,365367AA-B4F2-45D3-B5A5-7A3349D6A989,0x64028,0xE8D64020)
2:717  0:000  - [21]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(1,GPT,CAD4E0E4-90B6-492A-84F3-253AABB6A3BA,0x28,0x64000)
2:718  0:000          Result of bootcode detection: bootable Clover (clover)
2:739  0:021  - [22]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(2,GPT,24EFF662-2683-4FF7-8DFA-F4D3730029B2,0x2F34EF8,0x144C08F8)
2:740  0:000  - [23]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(3,GPT,E4FFE22B-B4DD-4C09-A08D-648A9587E890,0x173F57F0,0x135F20)
2:741  0:000  - [24]: Volume: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,85)\HD(4,GPT,35FF94A6-7CF7-462C-BC5E-57BEDD8341DB,0x1752B710,0x332ECB78)
3:067  0:326  Loading nvram.plist from Vol 'EFI' - loaded, size=2090
3:105  0:037  === [ PutNvramPlistToRtVars ] =============================
3:105  0:000   Adding Key: Clover.BackupDirOnDestVol: Size = 3, Data: 59 65 73 
3:105  0:000   Adding Key: Clover.KeepBackupLimit: Size = 3, Data: 31 30 30 
3:105  0:000   Adding Key: Clover.LogLineCount: Size = 4, Data: 33 30 30 30 
3:105  0:000   Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B 
3:105  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
3:105  0:000   Adding Key: SystemAudioVolume: Size = 1, Data: 10 
3:105  0:000   Adding Key: SystemAudioVolumeDB: Size = 1, Data: D2 
3:105  0:000   Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 32 E0 89 04 00 00 00 00 10 3D F4 B7 E2 F0 3E 4C 
3:105  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
3:105  0:000   Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 
3:105  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 11 
3:105  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
3:105  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
3:105  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 02 C0 07 00 
3:105  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
3:105  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
3:105  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
3:105  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
3:105  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6B 35 00 66 00 00 00 00 
3:105  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 01 39 0F 00 00 11 
3:105  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
3:105  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6B 35 00 66 00 00 00 00 
3:105  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
3:105  0:000   Adding Key: fmm-computer-name: Size = 18, Data: 4D 61 63 20 50 72 6F C2 A0 E2 80 94 20 53 74 65 76 65 
3:105  0:000   Adding Key: platform-uuid: Size = 16, Data: 06 3F 8F 09 A0 E6 5B CE 8A 27 BC 02 28 A8 E8 7F 
3:105  0:000   Adding Key: prev-lang:kbd: Size = 4, Data: 72 75 3A 30 
3:105  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
3:105  0:000  === [ InitTheme ] =========================================
3:105  0:000   using embedded theme
3:106  0:000  Using embedded font: Success
3:106  0:000  Choosing theme <null string>
3:106  0:000  after NVRAM boot-args=-v -lilubeta -alcbeta
3:106  0:000  === [ Dump SMC keys from NVRAM ] ==========================
3:106  0:000  found AppleSMC protocol
3:106  0:000  === [ ScanLoader ] ========================================
3:106  0:000  - [06]: 'EFI'
3:130  0:024  - [07]: 'Capt'
3:214  0:083          AddLoaderEntry for Volume Name=Capt
3:251  0:037      Check if volume Is Hibernated:
3:251  0:000      Check sleep image 'by signature':
3:320  0:069      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:321  0:000      SleepImage name from pref: ImageVolume = 'Capt', ImageName = '\private\var\vm\sleepimage'
3:357  0:036      sleepimage not found -> Not Found
3:357  0:000      hibernated: no - sign
3:357  0:000  Icon 17 decoded, pointer DEB15218
3:358  0:000  - [08]: 'HS'
3:413  0:054          AddLoaderEntry for Volume Name=HS
3:437  0:024      Check if volume Is Hibernated:
3:437  0:000      Check sleep image 'by signature':
3:507  0:069      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
3:507  0:000      using default sleep image name = \private\var\vm\sleepimage
3:591  0:083      sleepimage not found -> Not Found
3:591  0:000      hibernated: no - sign
3:591  0:000  - [09]: 'Recovery HD'
3:608  0:016          AddLoaderEntry for Volume Name=Recovery HD
3:614  0:005  Icon 20 decoded, pointer 0
3:614  0:000          [!] Icon 20: Text <recovery> rendered
3:614  0:000  - [10]: 'Empty'
3:615  0:000  - [11]: 'Snow Leopard HD 10.6.8'
3:655  0:040          AddLoaderEntry for Volume Name=Snow Leopard HD 10.6.8
3:681  0:025      Check if volume Is Hibernated:
3:681  0:000      Check sleep image 'by signature':
3:732  0:051      using default sleep image name = \private\var\vm\sleepimage
3:752  0:019      sleepimage not found -> Not Found
3:752  0:000      hibernated: no - sign
3:752  0:000  - [12]: 'M2'
3:814  0:061          AddLoaderEntry for Volume Name=M2
3:866  0:051      Check if volume Is Hibernated:
3:866  0:000      Check sleep image 'by signature':
3:930  0:063      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:930  0:000      SleepImage name from pref: ImageVolume = 'M2', ImageName = '\private\var\vm\sleepimage'
3:990  0:059      sleepimage not found -> Not Found
3:990  0:000      hibernated: no - sign
3:990  0:000  - [13]: 'EFI'
3:990  0:000  - [14]: '2 UNIT 2T'
3:991  0:000  - [15]: 'EFI'
3:991  0:000  - [16]: '4 UNIT 2T'
3:992  0:000  - [17]: 'EFI'
3:992  0:000  - [18]: '1 UNIT 2T'
3:993  0:000  - [19]: 'EFI'
3:993  0:000  - [20]: '5 UNIT 2T'
3:994  0:000  - [21]: 'EFI'
4:026  0:032  - [22]: 'Sierra'
4:078  0:052          AddLoaderEntry for Volume Name=Sierra
4:109  0:030      Check if volume Is Hibernated:
4:109  0:000      Check sleep image 'by signature':
4:156  0:046      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
4:156  0:000      using default sleep image name = \private\var\vm\sleepimage
4:194  0:038      sleepimage not found -> Not Found
4:194  0:000      hibernated: no - sign
4:195  0:000  - [23]: 'Recovery HD'
4:196  0:000          AddLoaderEntry for Volume Name=Recovery HD
4:210  0:014  - [24]: 'DATA'
4:235  0:025  === [ AddCustomTool ] =====================================
4:235  0:000  Icon 8 decoded, pointer DB3B8498
4:271  0:036  found tool \EFI\CLOVER\tools\Shell64U.efi
4:271  0:000  Checking EFI partition Volume 6 for Clover
4:271  0:000   Found Clover
4:271  0:000  Icon 2 decoded, pointer DB2B8F18
4:271  0:000  Icon 1 decoded, pointer DEB13F98
4:271  0:000  Icon 0 decoded, pointer DB2B8818
4:271  0:000  Icon 5 decoded, pointer DB2B8798
4:271  0:000  Icon 6 decoded, pointer DB2B8718
4:272  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
4:272  0:000  Default boot entry not found
4:272  0:000  DefaultIndex=-1 and MainMenu.EntryCount=13
4:272  0:000  Icon 21 decoded, pointer DB2B8618
4:531  0:258  Icon 22 decoded, pointer DB2B8698
4:531  0:000  Icon 23 decoded, pointer DB2B8518
4:563  0:032  Icon 11 decoded, pointer DB2B8098
4:564  0:000  GUI ready
79:972  75:408   enter menu with LoadOptions: -v -lilubeta -alcbeta
79:972  0:000   and with FlagsBits = 0x2
85:544  5:571   exit menu with LoadOptions: -v -lilubeta -alcbeta keepsyms=1
85:544  0:000   get FlagsBits = 0x2
85:544  0:000   boot with args: -v -lilubeta -alcbeta keepsyms=1
85:544  0:000  BootVariable of the entry is empty
85:544  0:000  === [ StartLoader ] =======================================
85:544  0:000  Finally: Bus=133238kHz CPU=3331MHz
85:544  0:000  Loading boot.efi  status=Success
85:952  0:408  GetOSVersion: 10.13 (17A291j)
85:953  0:001  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
85:953  0:000  Filtering KextPatches:
85:953  0:000   - [00]: AppleTyMCEDriver (No Panic on MacPro4,1 - 5,1) :: BinPatch :: [OS: 10.13 | MatchOS: All | MatchBuild: All] ==> allowed
85:953  0:000   - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13 | MatchOS: All | MatchBuild: All] ==> allowed
85:953  0:000  === [ PatchSmbios ] =======================================
85:953  0:000  insert table 9 for dev 0:0
85:953  0:000  insert table 9 for dev 0:1
85:953  0:000  insert table 9 for dev 0:0
85:953  0:000  insert table 9 for dev 6:0
85:954  0:000  Trusting SMBIOS...
85:954  0:000  Channels: 3
85:954  0:000  Interleave: 0 2 4 1 3 5 6 8 10 7 9 11 12 14 16 13 15 17 18 20 22 19 21 23
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 0 => 0 0:
85:954  0:000   DIMM1 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 1 => 2 2:
85:954  0:000   DIMM2 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 2 => 4 4:
85:954  0:000   DIMM3 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 3 => 1 1:
85:954  0:000   DIMM4 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 4 => 3 3:
85:954  0:000   DIMM5 1333MHz 4096MB
85:954  0:000   partNum unknown
85:954  0:000  SMBIOS Type 17 Index = 5 => 5 5:
85:954  0:000   DIMM6 1333MHz 4096MB
85:954  0:000  mTotalSystemMemory = 24576
85:954  0:000  NumberOfMemoryDevices = 6
85:954  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
85:954  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000
85:954  0:000  Type20[2]->End = 0xBFFFFF, Type17[2] = 0x6000
85:954  0:000  Type20[3]->End = 0xFFFFFF, Type17[3] = 0xA000
85:954  0:000  Type20[4]->End = 0x13FFFFF, Type17[4] = 0xF000
85:954  0:000  Type20[5]->End = 0x17FFFFF, Type17[5] = 0x15000
85:954  0:000  === [ PatchACPI ] =========================================
85:954  0:000  RSDT 0xDFEE1040
85:954  0:000  FADT from RSDT: 0xDFEE10C0
85:954  0:000  Xsdt is not found! Creating new one
85:954  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
85:954  0:000  RsdPointer Acpi 2.0 installed
85:954  0:000  RSDT entries = 8
85:954  0:000  Xsdt reallocation done
85:954  0:000  old FADT length=74
85:954  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\OEM\X58A-UD7\ACPI\patched\DSDT_21.aml
85:974  0:019  Apply DsdtFixMask=0x00000000
85:974  0:000     drop _DSM mask=0xFFFF
85:974  0:000  === [ FixBiosDsdt ] =======================================
85:974  0:000  USBADR[0] = 0x20000 and PCIe = 0x0
85:974  0:000  VideoCard devID=0x68981002
85:974  0:000  DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0
85:974  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
85:974  0:000  USBADR[2] = 0x1A0001 and PCIe = 0xFFFE
85:974  0:000  USBADR[3] = 0x1A0002 and PCIe = 0xFFFE
85:974  0:000  USBADR[4] = 0x1A0007 and PCIe = 0xFFFE
85:987  0:012  USBADR[5] = 0x1D0000 and PCIe = 0xFFFE
85:987  0:000  USBADR[6] = 0x1D0001 and PCIe = 0xFFFE
85:987  0:000  USBADR[7] = 0x1D0002 and PCIe = 0xFFFE
85:987  0:000  USBADR[8] = 0x1D0007 and PCIe = 0xFFFE
85:987  0:000  first CPU found at 62 offset 65
85:987  0:000  score candidate at 27
85:987  0:000  score inserted in acpi_cpu_score _SB_
85:987  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _SB_
85:987  0:000  Found PCIROOTUID = 0
85:987  0:000  === [ ACPIDropTables ] ====================================
85:987  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=PPM RCM  Length=13564
85:987  0:000   Xsdt has tables count=8
85:987  0:000   Table: SSDT  PPM RCM   13564 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=APIC TableID=GBTUACPI Length=300
85:987  0:000   Xsdt has tables count=7
85:987  0:000   Table: APIC  GBTUACPI  300 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=TAMG TableID=GBT   B0 Length=3266
85:987  0:000   Xsdt has tables count=6
85:987  0:000   Table: TAMG  GBT   B0  3266 dropped
85:987  0:000  Drop tables from Xsdt, SIGN=EUDS TableID= Length=1232
85:987  0:000   Xsdt has tables count=5
85:987  0:000   Table: EUDS    1232 dropped
85:987  0:000  === [ PatchAllSSDT ] ======================================
85:987  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
85:987  0:000   Xsdt has tables count=4
85:987  0:000  === [ ACPIPatchedAML ] ====================================
85:987  0:000  Unsorted
85:987  0:000  Inserting SSDT-2.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:006  0:019  Disabled: SSDT-1.aml, skip
86:006  0:000  Inserting SSDT.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:008  0:001  Inserting APIC.aml from EFI\CLOVER\OEM\X58A-UD7\ACPI\patched ... Success
86:008  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
86:008  0:000  === [ RestSetup macOS ] ===================================
86:008  0:000  EdidDiscovered size=128
86:008  0:000  ------- EDID Table
86:008  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D
86:008  0:000  010  |  59  06  00  00  00  00  2D  13  01  03
86:008  0:000  020  |  80  10  09  78  0A  EE  91  A3  54  4C
86:008  0:000  030  |  99  26  0F  50  54  BD  EF  80  71  4F
86:008  0:000  040  |  81  00  81  40  81  80  95  00  95  0F
86:008  0:000  050  |  B3  00  A9  40  02  3A  80  18  71  38
86:008  0:000  060  |  2D  40  58  2C  45  00  A0  5A  00  00
86:008  0:000  070  |  00  1E  66  21  50  B0  51  00  1B  30
86:008  0:000  080  |  40  70  36  00  A0  5A  00  00  00  1E
86:008  0:000  090  |  00  00  00  FD  00  18  4B  1A  51  17
86:008  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
86:008  0:000  110  |  00  FC  00  53  41  4D  53  55  4E  47
86:008  0:000  120  |  0A  20  20  20  20  20  01  3A
86:008  0:000  Framebuffer @0xE0000000  MMIO @0xFB5C0000 I/O Port @0x0000BE00 ROM Addr @0x00000000
86:008  0:000  PCI region 1 = 0x00000000, region3 = 0x00000000, region5 = 0x00000000
86:008  0:000  BIOS_0_SCRATCH=0x00000004, 1=0x000000FF, 2=0x00000000, 3=0x00000000, 4=0x00000000, 5=0x00000000, 6=0x00000000
86:009  0:000  RADEON_CRTC2_GEN_CNTL == 0x00000000
86:009  0:000   card posted because CONFIG_MEMSIZE=0x400
86:009  0:000  ATI card POSTed, 
86:009  0:000  Set VRAM for Cypress =1024Mb
86:009  0:000  ATI: get_vram_size returned 0x40000000
86:009  0:000  ATI Radeon EVERGREEN+ family
86:009  0:000  Users config name Uakari
86:009  0:000  (AtiPorts) Nr of ports set to: 4
86:009  0:000  ATI Cypress ATI Radeon HD 5870 Series 1024MB (Uakari) [1002:6898] (subsys [1002:0B00]):: PcieRoot(0x0)\Pci(0x3,0x0)\Pci(0x0,0x0)
86:021  0:012   codec not detected
86:021  0:000  stringlength = 3682
86:022  0:000  CurrentMode: Width=1920 Height=1080
86:022  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DF453718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DF453718
86:052  0:030  Use origin smbios table type 1 guid.
86:053  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\X58A-UD7\kexts\Other
86:053  0:000    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\CPUSensors.kext
86:058  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\FakeSMC.kext
86:063  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\BluetoothDevBroadcomInjector.kext
86:072  0:009    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\GPUSensors.kext
86:079  0:007    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\LPCSensors.kext
86:124  0:045    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\AppleALC.kext
86:170  0:045      Extra PlugIn kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
86:281  0:111    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\JMicron36xATA.kext
86:295  0:014    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\Other\Lilu.kext
86:307  0:011  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\X58A-UD7\kexts\10.13
86:312  0:004    Extra kext: EFI\CLOVER\OEM\X58A-UD7\kexts\10.13\RealtekRTL8111.kext
86:328  0:015  SetStartupDiskVolume:
86:328  0:000    * Volume: 'HS'
86:328  0:000    * LoaderPath: '<null string>'
86:328  0:000    * DevPath: HS
86:328  0:000    * GUID = 69F0690C-4007-4E78-9DA8-0803A8ED9214
86:328  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>69F0690C-4007-4E78-9DA8-0803A8ED9214</string></dict></dict></dict></array>
86:328  0:000  Custom boot screen not used because entry has unset use graphics

Great. Take a DMI dump from Darwin dump.

When upload file, remove your serial and MLB and MAC address. Then upload here.

 

Thanks in advance

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Hi guys,

 

A few questions from my side. I'm trying to debug a certain issue I've got with one of the Recovery disks, after reinstalling High Sierra from it... I think it might have created an extra Recovery partition or something.

 

 

They are all related to FileVault 2. By the way, really nice job with the FileVault implementation. I never thought I would see the day when this would work.

 

 

Anyway, so here are the questions:

1. When you're using FileVault, is it normal that the Clover UI says "Boot macOS from Recovery HD"? I mean...why Recovery? I didn't name my boot drive "Recovery". I have a separate partition for that. It's confusing. Am I really booting from Recovery in this case? :) It's even funnier when it says "Boot Recovery from Recovery".

 

The problem comes when you have multiple installations, and you don't know which one is the one you want to boot into, since all of them are named "Recovery".

 

Also, the issue I'm having right now, is that I might have two "Recovery" partitions instead of one, for the same installation... Meaning one boot drive for High Sierra, and two recovery partitions, only one of which seems to be real. If you look at the screenshot below, you will see I have 7 partitions on 2 different physical drives. If I remember correctly, there were only 6 (one Boot and one Recovery for each) before reinstalling High Sierra.

 

So this is a screenshot of one of the partitions (HFS+ partition with FileVault). And it should say SierraSSD for that particular case. Since that's the name of the boot drive.

 

From left to right, I should have:

 

HiSierraHDD - HDD HFS+ boot partition of High Sierra (10.13, now on DP2) ,initially encrypted on DP1, reinstalled from Recovery after a failed update of DP2 (couldn't boot into it, I got the Forbidden icon on boot). Now it's unencrypted, so no FileVault anymore. Also, I should (I think) have only one Recovery partition. However, I seem to have two...or something... Hard to tell when all of them are named Recovery. It looks like one is the old volume for encrypted booting (usually named Recovery, for some reason), while the other one is the real Recovery...? This is so confusing.

 

And this is what it looks like in Clover GUI.

 

post-1303722-0-35275800-1498324004_thumb.png post-1303722-0-80272800-1498324010_thumb.png post-1303722-0-53476900-1498324018_thumb.png

 

SierraSSD - SSD HFS+ boot partition of Sierra (10.12). Encrypted with FileVault and everything ok.

 

And this is what it looks like in Clover GUI

 

post-1303722-0-25336800-1498321938_thumb.png

 

HiSierraSSD - SSD APFS boot partition of High Sierra (10.13 DP2). Encrypted with FileVault and everything ok.

 

And this is what it looks like in Clover GUI.

 

post-1303722-0-48723000-1498321945_thumb.png

 

Here's the list of partitions, from Terminal, in case that helps. 

 

post-1303722-0-98906800-1498323457_thumb.png

 

2. I'm not sure there is anything that can be done about this one, but I'm gonna ask anyway. When using FileVault, the first stage boot is a transparent background, the Apple logo is replaced by a generic "user icon" and you get the loading bar underneath. Everything ok so far.

 

For the second stage boot, on real macs, you get the same thing. But I only get the loading bar, on a black screen. Now, of course, there are many differences here. And it's not a big deal anyway. But I was just wondering why does this happen and if it can be fixed somehow. Again, I'm not sure there is anything that Clover can help with here, so I apologize for the off-topic, if that's the case. But I'll never know if if I don't ask. :)

 

3. I know Clover is not (or at least I think it's not) supposed to look the same as Apple's bootloader. However, I was wondering if there was a way to hide the Recovery partitions, if you don't need them, for a cleaner look. And maybe, be able to access them with a shortcut or something, in Clover GUI, when you do need them. On real Macs, those partitions are most likely hidden, and to be honest, I have no idea if you can make them visible or not. You probably can, but I never messed with that. Anyway, that's beside the point. I was just wondering if there is any way to hide them with Clover, as well, while still being able to easily access them when needed.

 

Anyway, that's about it from me for today. Damn, that's gonna be a long post.

Link to comment
Share on other sites
apianti
apianti
Posted
Posted

@arsradu,

 

Looks perfectly fine to me. The two recovery HD are to recover the installs, the third inside the APFS is to fix the APFS container. The reason you need to boot from recovery HD when you use filevault is that the other partition is encrypted and can't be booted from without decryption, which starts from the recovery because it's not encrypted. I'm not sure about the look when you boot. On my mac (before it was just stolen) there was a black screen with a bar, then login, then looked like normal boot, so not sure, haven't got filevault on my desktop. As for the hiding partitions or renaming them, read the wiki and look for GUI/Custom/Entries. You can even rename them so you can more easily determine which boots what.

  • Like 2
Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

@arsradu,

 

Looks perfectly fine to me. The two recovery HD are to recover the installs, the third inside the APFS is to fix the APFS container. The reason you need to boot from recovery HD when you use filevault is that the other partition is encrypted and can't be booted from without decryption, which starts from the recovery because it's not encrypted. I'm not sure about the look when you boot. On my mac (before it was just stolen) there was a black screen with a bar, then login, then looked like normal boot, so not sure, haven't got filevault on my desktop. As for the hiding partitions or renaming them, read the wiki and look for GUI/Custom/Entries. You can even rename them so you can more easily determine which boots what.

 

Well, that's the confusing part. On my MBP, I also have FileVault enabled. And...on boot, I only see the partition with its correct name. I mean I'm not booting "Recovery". I'm booting whatever I named that boot drive. :))

 

For the boot stages, this only occurs when FileVault is enabled. When it's not, I get a regular black screen with the Apple logo and loading bar underneath, for both stages. However, when it's enabled, I get the transparent background and the generic user icon only for the first stage. On the second stage, I only have the loading bar on a black background. As I said, not a big issue. Not sure Clover can help in any way with this...But I thought I'd ask, just in case. :)

 

As for the customization, I will definitely check it out. Thank you. :) I'm wondering though...why is this not done automatically? Meaning, the naming of the drives. In order to make it less confusing when you have more than one boot partition. How do real Macs read the name of that partition if it's encrypted? 

Link to comment
Share on other sites
apianti
apianti
Posted
Posted

Yes I know what you mean about on a real mac, there's probably some setting file on the recovery that has the actual volume that will be booted. No one has taken the time to look and figure it out since filevault is one of the newer working features (and not fully or for everyone). Maybe you are missing an EFI driver or something else that is needed to properly draw the boot screen? Unsure. As for the automatically name recovery HDs, I don't think they are linked to a specific os volume unless it's encrypted. Then what do you name them? Recovery HD 1, etc. That's why the custom entries exist, so you can name them appropriately for yourself. Also usually they are in exact order since the recovery is always next to the os volume.

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Yes I know what you mean about on a real mac, there's probably some setting file on the recovery that has the actual volume that will be booted. No one has taken the time to look and figure it out since filevault is one of the newer working features (and not fully or for everyone). Maybe you are missing an EFI driver or something else that is needed to properly draw the boot screen? Unsure. As for the automatically name recovery HDs, I don't think they are linked to a specific os volume unless it's encrypted. Then what do you name them? Recovery HD 1, etc. That's why the custom entries exist, so you can name them appropriately for yourself. Also usually they are in exact order since the recovery is always next to the os volume.

 

Yep. I know FileVault is new. And as I said above, I'm really grateful it works as it does. I never thought I'd see it working on a hackintosh. And about the drivers, yeah, I already needed one (not sure if this should have been included with Clover or not...) but I wasn't able to input my password. So I used something called AptioInputFixB2.efi (I think) and now everything's ok.

 

So, if I need another driver to fix the second stage boot, any idea which one would that be?

 

Anyway, I'm still having 7 partitions and only 3 OSes with their recoveries. One unencrypted (first screenshot in my post above, with the correct name, by the way :)) ). And two encrypted (also included in my post above). The last one also being an APFS volume.

 

However, I should have 6 partitions in total, not 7...right? I mean, 3 OSes, 3 recoveries.

 

I think one might be an extra from when the first drive (HiSierraHDD) was encrypted (I'm talking about the second drive from the left in Clover GUI). Since it says "Boot macOS from Recovery HD". The "real" Recovery partition for that drive says "Boot Recovery from Recovery HD" (3rd screenshot in my post above). But now it's not encrypted anymore (since I reinstalled without encryption), so why is that still there? Can I remove it? If so, how would I do that?

Link to comment
Share on other sites
mhaeuser
mhaeuser
Posted
Posted

Well, that's the confusing part. On my MBP, I also have FileVault enabled. And...on boot, I only see the partition with its correct name. I mean I'm not booting "Recovery". I'm booting whatever I named that boot drive. :))

Showing a drive with the label of a different drive is a bless concept... Clover does not support bless. ;)

  • Like 1
Link to comment
Share on other sites
apianti
apianti
Posted
Posted

Yep. I know FileVault is new. And as I said above, I'm really grateful it works as it does. I never thought I'd see it working on a hackintosh. And about the drivers, yeah, I already needed one (not sure if this should have been included with Clover or not...) but I wasn't able to input my password. So I used something called AptioInputFixB2.efi (I think) and now everything's ok.

 

So, if I need another driver to fix the second stage boot, any idea which one would that be?

 

Anyway, I'm still having 7 partitions and only 3 OSes with their recoveries. One unencrypted (first screenshot in my post above, with the correct name, by the way :)) ). And two encrypted (also included in my post above). The last one also being an APFS volume.

 

However, I should have 6 partitions in total, not 7...right? I mean, 3 OSes, 3 recoveries.

 

I think one might be an extra from when the first drive (HiSierraHDD) was encrypted (I'm talking about the second drive from the left in Clover GUI). Since it says "Boot macOS from Recovery HD". The "real" Recovery partition for that drive says "Boot Recovery from Recovery HD" (3rd screenshot in my post above). But now it's not encrypted anymore (since I reinstalled without encryption), so why is that still there? Can I remove it? If so, how would I do that?

 

There is a topic devoted to just filevault troubleshooting. As for your double entry for the first OS, if you encrypted the volume, then decrypted, the boot.efi for booting the encrypted volume was never removed from the recovery HD. So now you have the unencrypted one from the volume, and the one that is supposed to boot the encrypted. This is because of bless, as DF pointed out. Since macOS would just re-bless back to the recovery but clover doesn't look at this and only for the existance of the boot files.

 

Showing a drive with the label of a different drive is a bless concept... Clover does not support bless. ;)

 

The label is located in the file /System/Library/CoreServices/.disk_label.contentDetails on the Recovery HD. Granted that /System/Library/CoreServices is the blessed directory by default. But I'm sure there is also /System/Library/CoreServices/com.apple.Boot.plist that gives the UUID of the linked volume.

 

EDIT: It is the blessed directory by default when filevault is enabled. Otherwise it is /com.apple.recovery.boot.

  • Like 1
Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Showing a drive with the label of a different drive is a bless concept... Clover does not support bless. ;)

 

 

I see... So, technically, real Macs should also show FileVault OS encrypted partitions as "Recovery"-labeled partitions? It's just that Macs bootloader can link the OS label (for example "SierraSSD") to the "Recovery" partition and show it in an intuitive way, whereas Clover can't? Because of...Bless? Did I get this right? This is a lot of new information for me. So, I apologize for the stupid questions. As for the Custom Entries...I'll have to read more into it. Right now it's really confusing. :))

 

I was wondering if there's a simple way to rename a drive directly from Clover GUI. Like an option to Rename it, and then save the changes to config. I couldn't find such an option, but maybe I didn't look hard enough.

Link to comment
Share on other sites
apianti
apianti
Posted
Posted

I see... So, technically, real Macs should also show FileVault OS encrypted partitions as "Recovery"-labeled partitions? It's just that Macs bootloader can link the OS label (for example "SierraSSD") to the "Recovery" partition and show it in an intuitive way, whereas Clover can't? Because of...Bless? Did I get this right? This is a lot of new information for me. So, I apologize for the stupid questions. As for the Custom Entries...I'll have to read more into it. Right now it's really confusing. :))

 

I was wondering if there's a simple way to rename a drive directly from Clover GUI. Like an option to Rename it, and then save the changes to config. I couldn't find such an option, but maybe I didn't look hard enough.

 

No, Macs show the volume name and no recovery HD when filevault is enabled. You must press CMD+R during startup to boot into recovery. I told you edit your config.plist and add GUI/Custom/Entries.

 

EDIT: Unsure who edited the wiki and completely broke all the anchor tags.... It's annoying though.

  • Like 1
Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

There is a topic devoted to just filevault troubleshooting. As for your double entry for the first OS, if you encrypted the volume, then decrypted, the boot.efi for booting the encrypted volume was never removed from the recovery HD. So now you have the unencrypted one from the volume, and the one that is supposed to boot the encrypted. This is because of bless, as DF pointed out. Since macOS would just re-bless back to the recovery but clover doesn't look at this and only for the existance of the boot files.

 

Yep, so HiSierraHDD was encrypted in DP1. And, at this stage, I only had 6 boot entries. Each OS with its corresponding Recovery partition.

 

Then I tried to update to DP2, and I got that Forbidden icon on boot. So I booted into Recovery, unlocked and formatted HiSierraHDD and reinstalled the OS. Apparently this also installed DP2. So I didn't have to update again.

 

However, at this stage, I also got a new boot entry for the (now unencrypted) drive and I still have the one which was previously pointing to the encrypted one.

 

So...how do I fix this? Preferably without screwing everything up. :))

Link to comment
Share on other sites
mhaeuser
mhaeuser
Posted
Posted

The label is located in the file /System/Library/CoreServices/.disk_label.contentDetails on the Recovery HD. Granted that /System/Library/CoreServices is the blessed directory by default. But I'm sure there is also /System/Library/CoreServices/com.apple.Boot.plist that gives the UUID of the linked volume.

contentDetails is only used for construction afaik, BootPicker displays the image. But yes. that's the magic. :)

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

No, Macs show the volume name and no recovery HD when filevault is enabled. You must press CMD+R during startup to boot into recovery. I told you edit your config.plist and add GUI/Custom/Entries.

 

Aham... Understood. Thank you.

 

I never tried GUI/Custom/Entries.... and by the looks of it, I might need some time to understand how to use it. But I'll definitely give it a try.

 

Well, I have to admit, being able to clearly determine what the hell you're booting into, would be a real bless. :D

 

EDIT: Unsure who edited the wiki and completely broke all the anchor tags.... It's annoying though.

LOL

Link to comment
Share on other sites
apianti
apianti
Posted
Posted

Yep, so HiSierraHDD was encrypted in DP1. And, at this stage, I only had 6 boot entries. Each OS with its corresponding Recovery partition.

 

Then I tried to update to DP2, and I got that Forbidden icon on boot. So I booted into Recovery, unlocked and formatted HiSierraHDD and reinstalled the OS. Apparently this also installed DP2. So I didn't have to update again.

 

However, at this stage, I also got a new boot entry for the (now unencrypted) drive and I still have the one which was previously pointing to the encrypted one.

 

So...how do I fix this? Preferably without screwing everything up. :))

 

Hit the space bar on the one entry you want to remove and see what the path is and then go to that drive and remove the file. Or hide it with custom entries.

 

 

Aham... Understood. Thank you.

 

I never tried GUI/Custom/Entries.... and by the looks of it, I might need some time to understand how to use it. But I'll definitely give it a try.

 

LOL

 

They are basically filters, so any anything that matches the keys you add to a custom entry will give a boot entry that has all the additional properties, like name, arguments, etc.

 

contentDetails is only used for construction afaik, BootPicker displays the image. But yes. that's the magic. :)

 

Yeah. But better magic would be getting the correct bless information yet who is not lazy and going to do that?

  • Like 1
Link to comment
Share on other sites
mhaeuser
mhaeuser
Posted
Posted

Yeah. But better magic would be getting the correct bless information yet who is not lazy and going to do that?

For retrieving the file: The logic to detect all those hard-coded paths is without a doubt larger than a bless logic would be.

Regarding the label: Guess showing 'all bootable paths' is the Clover way, a Mac-way is quite limited tbh (e.g. no Recovery entry with HFS FV2).

  • Like 1
Link to comment
Share on other sites
apianti
apianti
Posted
Posted

For retrieving the file: The logic to detect all those hard-coded paths is without a doubt larger than a bless logic would be.

Regarding the label: Guess showing 'all bootable paths' is the Clover way, a Mac-way is quite limited tbh (e.g. no Recovery entry with HFS FV2).

 

Yes, but that method is needed to support booting any other OS. However using the bless directory information would help with the constantly changing boot.efi paths, especially for installers. Also the information for the recovery to boot is still in the (secondary) bless directory information when filevault is enabled, which is how you can still boot to it with CMD+R. So you could read the bless information and get both the filevault decrypt start for the OS volume, and the recovery.

  • Like 2
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...