114 replies to this topic

[alexandros7]

hi.. I want to buy np700z5c.. it has the hd 4000 so do you think I will be able to use hdmi external monitor? (using together the laptop monitor.. ) thanks

[nhart12]

ac3bcn, on 21 October 2012 - 03:33 PM, said:

That's a great progress, there are an others users experiencing the same problem.
I think you'll not get two output monitors working at the same time.

well I actually got everything working by using some of the pin connector info found here ###########..  My laptop didnt like the 05 03 00 00 02 00 00 00 30 00 00 for the lvds. so I had to change that to 01 00 00 00 02 00 00 00 30 00 00 00..
I dont know what would cause that..
And in order to get both external monitors working at the same time i had to change the vga out to: 06 02 00 00 00 01 00 00 09 00 00 00   
  and HDMI to: 03 04 00 00 00 08 00 00 06 00 00 00
so hopefully that can help others with the same laptop or similar..
And after a patch for HD4000 HDMI audio everything works perfect!

SO  THANKS AC3bcn! for your help and for links to those threads

[dimak08]

Hello!) I

I want to run on my laptop Mac OS 10.8.2. I read on the internet, it is possible. But I can not.
I tried different options, but the best that I was able to achieve - a gray screen..

Bootloader Chimera 1.11.1 (compatible with HD4000)

DSDT: http://dl.dropbox.co...254998/DSDT.aml
it has already been fixed from mistakes. Nothing extra is not cleared, nothing is added. Attempts to change anything gave nothing.

Asus k55vm:
CPU Mobile DualCore Intel Core i5-3210M
Motherboard Intel Panther Point HM76, Intel Ivy Bridge
RAM 3981 МБ
Video 1Intel® HD Graphics 4000 (1842074 КБ)
Video 2NVIDIA GeForce GT 630M (2096960 КБ)
Soud Realtek ALC270
WLAN Atheros AR9485WB-EG

In the BIOS can not choose 96MB as they say in some manuals. I can choose 32, 64, 128, etc. If i chose 128 or more - kernel panics.

Can you help me?

I use kexts in /Extra:

ACPISensors.kext
AHCI_3rdParty_SATA.kext
AppleACPIPlatform.kext
AppleUSBXHCI.kext
CalDigitFastIO.kext
CalDigitUSBxHCI.kext
EvOreboot.kext
FakeSMC.kext
IntelCPUMonitor.kext
IONetworkingFamily.kext
IOPCIFamily.kext
JMicron36xATA.kext
NullCPUPowerManagement.kext

[Furby]

Have you try 64MB ? My motherboard Asrock Z 77 Extreme M Ok with latest mb und chimera 1.11.1.-
try it

Furby

[THEHAWKs]

ZOTAC Z68-ITX WiFi Supreme + Intel Core i3 3225

HDMI = ok

DVI to HDMI = ok

The Tv i have it hooked up to looks bad

 mini6,1.png   657.57K   250 downloads

[macrhab]

I have an i5-3570K and Z77X-UD5H mobo, as recommended for a Hackintosh at another site. However, I am having no luck in loading HD4000 on 10.8.2. I have 8Gb RAM and a Sandisk  extreme SSD, which takes 45 secs to boot.
GE=yes causes KP whatever the rest of the Boot.plist. With GE=no and string injection I also get KP.
I have tried all of these:
ig-platform-id: 01660000, Stolen RAM for FB: 96MB, Pipes: 3, Ports: 4, FBMem: 3
ig-platform-id: 01660001, Stolen RAM for FB: 96MB, Pipes: 3, Ports: 4, FBMem: 3
ig-platform-id: 01660002, Stolen RAM for FB: 64MB, Pipes: 3, Ports: 1, FBMem: 1
ig-platform-id: 01660003, Stolen RAM for FB: 64MB, Pipes: 2, Ports: 2, FBMem: 2
ig-platform-id: 01660004, Stolen RAM for FB: 32MB, Pipes: 3, Ports: 1, FBMem: 1
ig-platform-id: 01660008, Stolen RAM for FB: 64MB, Pipes: 3, Ports: 3, FBMem: 3
ig-platform-id: 01660009, Stolen RAM for FB: 64MB, Pipes: 3, Ports: 3, FBMem: 3
ig-platform-id: 0166000A, Stolen RAM for FB: 32MB, Pipes: 2, Ports: 3, FBMem: 2
ig-platform-id: 0166000B, Stolen RAM for FB: 32MB, Pipes: 2, Ports: 3, FBMem: 2
ig-platform-id: 01620005, Stolen RAM for FB: 32MB, Pipes: 2, Ports: 3, FBMem: 2

I am using the D-sub for connecting to my rather old screen. Might this be the problem? Most of the posts with helpful advice are from quite a long time ago in computer terms and I am not sure how relevant they all are now.
Am I right in thinking that if I abandon, at least for the moment, the HD4000 quest - it has already soaked up a huge amount of time - and buy for example a GTX640 graphics card I don't need to worry about HD4000? I specially want good audio and video and need to run Quartz extreme.
Many thanks for any help.

[r0ot]

any solution to ux31 / ux21 asus zenbook vga out + hdmi out ?

[Panas78]

I've managed to setup HD4000 with DSDT Editing using ig-platform-id: 0166000A on a GA Z77 DS3H motherboard with i5 3570k. (DSDT fixes + patched AppleHDA)
I have full acceleration and HDMI audio using HDMI output to my Sony TV.
The problem is that it boots fine with 1920x1080p BUT if i try to change resolution to something lower than that everything gets messed up.
The only way to have correct resolution change is to put computer to sleep and after wake everything is OK i can then change resolution to anything i want ,after reboot the problem appears again.
I also tried with DVI to HDMI adaptor but same issue.



Tried with latest chameleon from http://chameleon.osx86.hu Chameleon-2.1-r2069.pkg.zip and latest Chimera.
Bios settings have been checked and Graphics Enabler in boot loader is disabled.(Also tried with out any dsdt and Graphics Enabler = True in Chimera but same results)

Tried also MacPro3,1,MacMini5,1 and iMac12,2 if i remember correct.

Any help will be appreciated.


http://www.insanelym...0-hdmi-problem/

[mmesh]

Hi!

I have a HP ProBook 6570b laptop with Intel HD4000 integrated video.
I used this tutorial http://goo.gl/iwHTX for installing and creating triple boot (less of Win7 as in tutorial) and I found this thread while googling how to enable HD4000 full acceleration.

Can anyone, please,  confirm that this method will work on this laptop?

Thanks!

[Compik]

Hi
Tried to set up HDMI, in DSDT prescribed PlatformID 01660009.
And Did patch AppleFrameBufferCapri follows:
replacement <01000000 02000000 30000000 02050000 00040000 07010000 03040000 00040000 07010000> to <05030000 02000000 30000000 02050000 00040000 07040000 03040000 00040000 81000000> from
PlatformID 01660003 - works HDMI, not the led backlight of the laptop screen.
Then tried to <01000000 02000000 30000000 02050000 00040000 07010000 03040000 00040000 07010000> change to <02050000 00040000 07010000 03040000 00040000 07010000 04060000 00080000 06000000> from PlatformID 0166000A - on the contrary does not work HDMI, the led backlight of the laptop screen- work.
While watching get the following:
at <05030000 02000000 30000000 02050000 00040000 07040000 03040000 00040000 81000000>
05, 02 and 05 include a dedicated HDMI. 30 - include brightness (for me) and identifies the monitor as an internal laptop monitor (screen attached when05). other numbers you can even nullify such write <05000000 00000000 30000000 02050000 00000000 00000000 00000000 00000000 00000000> the result of the same. And here works Sleep, correct change screen resolution and brightness adjustment. But at minimum brightness the screen is completely black, with a maximum of darkened gray (as if the monitor is not working lights, or low level of brightness).

at <02050000 00040000 07010000 03040000 00040000 07010000 04060000 00080000 06000000>
02 includes the backlight of the monitor, and the monitor is defined as external (when02 screen attached). dimming no resolution is only one, if you change to a smaller image fault of the screen. You can also reset the numbers. Sleep does not work.

if you try <02000000 00000000 30000000 02050000 00000000 00000000 00000000 00000000 00000000> - black screen and does not work hdmi.

Please help! Tell me how to run the led backlight on the internal display.
Ioreg, DSDT and screenshot http://www.sendspace.com/file/uus903

Maybe someone knows how to turn on the backlight of the monitor?

PS: I use the bootloader Clover. did inject EDID with bootloader. Use Samsung Ultra 530u3c-a02 (8gb ram, HD 4000)

[rr7]

Are you sure your are not having the same incorrect display pipe issue I'm having?

I thought it was the backlight not coming on to start with.

I have a post about it on my blog rather than repeat it, but I have discussed it on here in detail.

The web address is in my signature.

[Compik]

rr7, on 06 March 2013 - 08:28 PM, said:

Are you sure your are not having the same incorrect display pipe issue I'm having?

I thought it was the backlight not coming on to start with.

I have a post about it on my blog rather than repeat it, but I have discussed it on here in detail.

The web address is in my signature.

I have a black screen when do not inject EDID. If i do inject the screen is gray (no LED Backlight). In ioreg writes AAPL,DisplayPipe <00 00 00 00>
But I see that in my ioreg no IODisplayOption option than compare native ioreg MacBookAir 5.1.
It may write in Dsdt? Who knows how to do it?

Edited by Compik, 07 March 2013 - 04:21 PM.

[braynshock]

Folks,

Not sure how useful this will be, but I have been fighting with trying to get my Gigabyte GA-Z77N-Wifi and i7-3770K HD4000 working to no avail...Been at it for at least 2 weeks...

after searching all over the place, trying everything i could find in this thread as well as other sites, it dawned on me when someone posted it worked out of the box with no changes to the bios...

I upgraded my bios to the BETA F3d when i first bought the board...

The second I downgraded to F2, took out all device-properties and special addons in Chameleon plist....It booted up perfect!!!!

and running dual 1080p displays, one HDMI, one DVI.

Unreal...

So for anyone out there struggling with making this combination work, make sure you didn't upgrade your BIOS to far....

BTW... this also fixed the onboard RAID function...(i went out and bought a separate RAID card cause i assumed the onboard was software only when turned on, it didn't show up...

Thanks to all who have posted here, thanks for the help.

--BraynSHocK

[1GR3]

McDan, on 09 July 2012 - 09:13 PM, said:

I have a Z77X-UD5H too, but with a 3770k - can you point me in the right direction to apply the instructions above? I couldnt really see where in my DSDT i was supposed to make the edits to add the IGPU device (its not there at present)

I understand that it doesn't result in qe/ci being enabled but is a step forward at least. its the only thing left for me to get working on this otherwise great setup.

Cheers

Bump!
same configuration but no acceleration

[tha_toadman]

1GR3, on 24 March 2013 - 12:12 PM, said:

Bump!
same configuration but no acceleration

I'll try and help but it'll take a few days. I'm juggling two systems and that one is on the back burner for now. I could share my DSDT with the HDMI audio patch (z77x-ud5h) but we'd need to figure out the rest.

While I'm commenting here, what's with yurick's post on page 5... http://www.insanelym...80#entry1856310
Has anyone tested that out yet? It was a random post and no one really acknowledged it.