151 replies to this topic

[sonotone]

Well, lets try to make a thread compiling different ISO, INITRD or EXTRA folders made by users who want to share them.
Even if it's not "on demand", you can request for one but be very precise about your Motherboard/Computer, maybe somebody already done it.

If you wish to upload your precious, just few tips to follow:
- State what is the Motherboard/computer targeted
- Enumerate kexts provided
- Describe what is not working.

To make your Own ISO:
1- Galaxy's slimbuilt: http://forum.insanel...howtopic=129834
2- SuperHai method: http://forum.insanel...mp;#entry803725
3- HMBT Auto-Patch for edit image: (Beta) http://homepage.mac....c/CDBoot_RC2.sh

Ressources:
- Original ISO with project kexts: http://www.mediafire.com/?uwd9dtttjfk
- If you had problems, need advice, and other help type, go here: http://forum.insanel...howtopic=114651
- Original New Releases and Updates thread: http://forum.insanel...howtopic=113288
- Front Page thread: http://forum.insanel...howtopic=114013
- Run Patched kernel on retail DVD: http://forum.insanel...howtopic=123841
- Make your own GUI for Boot 132: http://forum.insanel...o...115428&st=0
- Enable sound from /extra/extensions.mkext http://forum.insanel...howtopic=129058
- Plist only method: http://forum.insanel...howtopic=129279

Bootloaders:
- Chameleon for Hard Disk: http://tinyurl.com/6je4eh
- PC-EFI V9 installer (HD only): http://forum.insanel...howtopic=142628
- Boot from EFI partition: http://forum.insanel...howtopic=127330[/b]

How-to Repack an Extensions.mkext:
1. software:
    - mkextMaker: http://forum.insanel...howtopic=140647
    - MKext Tool: http://######.com/in...=...1&Itemid=48

2. Manually:
- Open terminal
- Extract content:
sudo mkextunpack -a i386 -d path-to-destination-folder path-to-Extensions.mkext/Extensions.mkext
- Remove/Add/modify desired kexts
- Repair permissions:
sudo chmod -R 755 path-to-destination-folder
sudo chown -R root:wheel path-to-destination-folder
- Create new Extensions.mkext:
sudo kextcache -a i386 -m path-to-New-Extensions.mkext/Extensions.mkext path-to-destination-folder
- Replace the old one

------------------------------
Generic_ISO: http://www.mediafire.com/?1ne1zbl4znv (by f41qu3)

Multisupport_ISO (include various ISO selection with GUI): http://forum.insanel...o...st&p=934112 (by Hagar)

Gigabyte GA-965P-DS3_ISO v2 (P965 chipset): http://www.mediafire.com/?1rw5fnxdmtg (by Sabr)

Another Gigabyte GA-965P-DS3_ISO : http://forum.insanel...o...st&p=819870(by CheN NiaN)

Gigabyte EP35-DS3 (P35 chipset): http://forum.insanel...o...t&p=1015242 (by Ximekon)

Gigabyte GA-P35-DS3L_ISO (P35 Chipset): http://rapidshare.co...75/p35.iso.html

Gigabyte GA-P35-DS4_ISO (P35 chipset): http://www.mediafire.com/?0g8v3pxntz4 (by Elastic)

Gigabyte GA-EP35-DS3R_ISO with Nvidia/sound support + GUI (P35 chipset): http://forum.insanel...o...st&p=917398

Gigabyte GA-EP45-DS3R_KEXTS: http://www.mediafire.com/?zzz53ltyxoq (by PM!)

Gigabyte GA-EP45-DS3L_KEXTS-ISO: http://www.insanelym...p...t&p=1106015 (by Memfys)

Gigabyte GA G33m DS2R_KEXTS (G33 Chipset): http://www.mediafire.com/?nxzggymymjd  (by Xinux)

new Gygabyte EP45-UD3R/UD3P_KEXTS (P45 Chipset): http://forum.insanel...o...t&p=1044710 (by WinstonAce)

Gigabyte GA-X38-DS5_ISO (x38 chipset): http://forum.insanel...o...st&p=998506 (by Atomic903)

Asus p5w dh deluxe_ISO  (975X chipset) with nvidia support: http://forum.insanel...o...st&p=811773 (by macita)

another Asus p5w dh deluxe_ISO with Nvidia/sound support + GUI: http://www.mediafire...php?kdwjjyibilo

Asus P5K_ISO (P35 chipset): http://forum.insanel...o...st&p=870159 (by Lisacat)

Asus P5K Deluxe_ISO (P35 Chipset): http://forum.insanel...o...st&p=848752 (by Viper.BR)

Asus P5B-v2_ISO (P965 chipset): http://forum.insanel...o...st&p=859515 (by toto1234)

Asus PSE-VM HDMI_ISO (G35 chipset): http://forum.insanel...o...st&p=866994 (by Nomade)

Asus P5E _Mkext (X38 chipset) with sound support: http://forum.insanel...o...st&p=983470 (by ptitoine)

Dell e520_DMG (p965/g965 chipset): http://forum.insanel...mp;#entry808784 (by blkhockeypro19)

updated Dell_Inspiron_6400/9400_ISO with Nvidia/sound/ support + GUI: http://www.mediafire...php?3mvzghmwym0

Intel DP35DP_ISO (P35 Chipset): http://www.mediafire...php?hoatvdgqyzy

Intel D945GCLF2_ISO (Intel 945GC Chipset) include guide and pack : http://www.mediafire...php?ztnmnyfzj5u (by iSynapse)

Lenovo ThinkPad T60: http://www.mediafire...php?ux4zhtzttcm (by Joel)

Lenovo Y530A-PSE: http://forum.insanel...o...st&p=989485 (by CheN NiaN)

Acer Travelmate 5620: http://forum.insanel...o...t&p=1005803 (by Atomic999)
------------------------------

Edited by sonotone, 25 March 2009 - 11:33 AM.

[Zoka]

OSx86 on P45 and ICH10

I have very new motherboard GA-EP45-DS4P (quad core CPU) that is based on P45 + ich10, so I did not expect that using boot-132 method would work without tweaking, however grub-dfe.iso (grub-dfe.iso) worked without any mods, so I was able to install the 10.5.1 retail DVD. I tried other  ISOs floating around but they did not work for me.

Note that the grub-dfe.iso contains only 4 extensions:

ACPIPS2Nub.kext
IntelCPUPMDisabler.kext
SMBIOSEnabler.kext
dsmos.kext

The BIOS had to be set to use AHCI for SATA interface. SATA DVD is required. I was able to do full install, reboot and update to 10.5.4. I was expecting trouble with SATA & ich10, however ich10 is displayed as "Unknown AHCI Standard Controller" in System Profiler and seems to be working fine.

Another P45 thread deals with ASUS P45 based mobo.

Missing stuff: Nvidia 8600 GT acceleration and ALC889A sound.

Zoka

[macita]

Asus p5w dh deluxe with nvidia support.

http://forum.insanel...o...BIOS&st=400

[sonotone]

AppleACPIPS2Nub.kext is a plugin of AppleACPIPlatform.kext. You need to edit following SuperHai advice to get it work at boot.

[Sabr]

Ok, here's my GA-965P-DS3 v2 ISO: http://www.mediafire.com/?1rw5fnxdmtg

Has some improvements: support for Rev 1.0/Rev 2.0/Rev 3.3 Onboard LAN support. Includes Disabler.kext too. Also I bumped up the version numbers of the kexts so that they aren't replaced by the ones on the DVD. Haven't actually tested it with the retail DVD, but the extensions are working with my Retail DVD OS X install, so I presume it works ok.

[blkhockeypro19]

dell e520 with intel p965/g965 motherboard- http://forum.insanel...mp;#entry808784 in DMG format, sorry, live with it

[craigolio]

Sorry guys. I can't seem to figure out how to link to a post! *blush*

Here is the link to the file, with all the props to a guy called K.I.S.S

Good luck!!

hxxp://www.4shared.com/file/53547099/b8769aab/BOOT-KABYL-BUMBY.html

[oracle100]

Got it working on Asus Maximus Formula:
        
        1. Get Fillip's generic boot-132 download
        
            http://www.mediafire.com/?1ne1zbl4znv
        
        2.  Add kexts to generic.iso/ISOEN/INITRD.IMG/initrd/Extra/Extensions/ form  my current Kalyway install /System/Library/Extensions:
        
            a. kexts for your GPU (recognized My Nvidia 6200 w/o adding kexts)
            b. Network card (modded IONetworkingFamily.kext)
            c. sound card (I use a Diamond Xtreme Sound CMI8738PCIAudioDriver.kext)
        
            for details see Superhai Method to edit image: http://forum.insanel...mp;#entry803725

    3. Burned a cd (use cd-rw incase you need to make mods) NOTE: tried with USB stick but no success.

        Finder -> Services -> Disk utitlity -> (MD-5) -> File -> Open Disk Image -> generic.iso -> Burn

    4. Boot with the cd, then at prompt hit Esc.

        boot device should be defaulted to (df)

    5. insert Mac OS X Leopard Retail DVD,

    6. hit enter, it will start installing from Mac OS X Leopard Retail DVD.

    I  hope this works for you. From what other people suggested, I did not  have to fiddle with 80 or 81 settings to boot from DVD drive, just  hitting (df) worked.

7. Get intenet working and update to 10.5.4. as it will undo a lot of kexts that you may need to fix. Then fix the kexts.
    
    8. To boot without the cd, I installed Chameleon:http://tinyurl.com/6je4eh

      Then replace the root BOOT file with the one in the generic cd above. (you may need to show hidden files, delete current boot, and paste new boot)
Also copy the entire "Extra" folder inside the initrd.img to root or let chameleon loader handle it.

Update:

1. So far my QE/CI and Quartz Exterme is not supported on my 6200. (updated with Zephyroth Nvidia Universal Installer, QE now working!)

2. Vuze keeps giving me kernel Panics.

3. Kept getting error:

" _CFGetHostUUIDString: unable to determine UUID for host. Error: 35"

in the /Library/Logs/CoreRaid.log then (LOG Files/system.log). I assume Vuze (Azureus) caused it??? solved the problem by _CFGetHostUUIDString Final Extension FIX


My hardware:
      Asus Maximus Formula, Nvidia GF 6200, Diamond Xtreme Sound 7.1, Q6600 G0 stepping, 4G Corsair XMS2, Sata HD and DVDrw. Shutdown not working. No sound after coming back from sleep.



      

[Sabr]

Ingram, on Jul 14 2008, 05:11 PM, said:

Since sabr was lazy and didn't help me much out... I bought a USB keyboard (16 bucks and quality is crap). I modified his iso to support PS/2 keyboards and mice (no, you don't have to use them at the same time) ... I believe it works fine also for other isos. And it's here

http://www.mediafire.com/?dw3mwtsunel

What are you talking about? Are you serious?

I spent at least 2 hours talking with you on IRC and making a whole new ISO just to try and help with your PS2 problem... That's a whole lot more than most others on this forum would devote just to one person. If that's your definition of lazy - what else did you expect of me?

som3on3, on Jul 13 2008, 03:18 PM, said:

what does the disabler.kext actually do?

Put simply, the Disabler.kext disables certain specified kext's (listed in the Info.plist) from loading.

[CheN NiaN]

Updated 1.21/09
Enjoy the Speed.

another iso for GA-965P-DS3 3.3
with, PS/2, ICHx, Jmb36x, Ethernet(8056) support. Put NVdarwin and EHCIsleepenabler to your extensions folder. Most importantly, they're in mkext***Boost Speed! ***

initrd v5.0

[MTWomg]

Custom ISO for the GA-P35-DS3l

This fixes the issue of losing QE when updating to 10.5.4.

Use this iso. Update, install NvKush to the HD (It can not be on the disc) and that's it. You will have audio, QE, etc all working.

Enjoy.

http://rapidshare.co...75/p35.iso.html

BTW, This should handle audio on both 883 and 888.

[Petro]

I was able to install Retail 10.5 and upgrade to 10.5.4 without any problem. My setup consists of an Asus mobo P5K-V and intel core 2 quad cpu. I just used the generic iso.

[kitmac]

MTWomg, on Jul 16 2008, 02:45 AM, said:

Custom ISO for the GA-P35-DS3l

This fixes the issue of losing QE when updating to 10.5.4.

Use this iso. Update, install NvKush to the HD (It can not be on the disc) and that's it. You will have audio, QE, etc all working.

Enjoy.

http://rapidshare.co...75/p35.iso.html

BTW, This should handle audio on both 883 and 888.

THANX for that ISO worked perfectly....

I Installed this on the RIG in my signature labled 2nd RIG

Here's what i did.....

-Burn your ISO...Boot with it...

-Switch for retail Leopard 10.5 (in my case Burned DL-DVD) hit enter / make sure not to have any usb devices plugged gave me an issue

-Install on hard drive I previously formatted to GUID ....install took round 20-30 minutes
Leopard boots with 800x600 crapy resolution due to no nvidia compatability

-Installed 10.5.4 combo update....reboot with -v -f

-Install AppleHDA and HDAenabler for alc888 with Kext Helper use OSX86tools for quick extension cache clear and permissions...reboot

-Install Nvinstaller.52...used vanilla option for 256 (don't know Y he didn't just name it 256?)
Use OSX86tools once again for quick cache clear and extension permissions...reboot

-Install Chameleon...delete the boot file that it places on root and place the boot file that is on the P35.iso
onto your root.... place "extra folder" from P35.iso on the root as well

reboot without CD

U got yourself a 10.5.4 Mac....

My last tiny issue is my reboot sometimes gets hung up..not a big deal just gotta get off my butt and press the button
Shutdown works though. I hear that the appleapciplatform.kext needs to be replaced for a new one that is floating around here in the forum.
Gonna replace the one in my "extra" folder and try that when i get home...
If anybody has any ideas let me know......

[macita]

I UPDATED ALL THE NECESSARY FOR THE ASUS P5w DH Deluxe

Boot cd for retail dvd install and update,

2x boot cds for post install and update to 10.5.4

KExts pack for the kalyway Chameleon_DFE_for_Hard_Disk.zip

enjoy

[DB1]

Success - Asus P5k-vm rev 1.02g with core 2 duo 2.2ghz fully working retail leopard install updated to 10.5.4 - 9.4 kernel (generic 132)

patched IONetworkingFamily.kext sorted the Lan. Then able to sort out nvidia card with nvinject 2.0, ALC883 sound (5.1 surround) sorted with a couple of kext's from P5K-vm install thread:

http://forum.insanel...sho... vm&st=20 (post 26 for sound & network kexts) Thanks to Allsop

Only thing to sort now is booting from direct from HDD instead of the CD - I'm struggling with this and have tried a few times with the Kaly app & osx86tools app but cannot make it work as yet.

Though no response to my post many thanks go to all the wizards and genius throughout the forum who impart  their knowledge.

[FabricioGS]

Prepared for Asus P5K Deluxe (may work also on P5K-E and P5K Premium)

Working: Onboard ethernet, shut down/restart

Not working: Wireless, onboard audio

Kexts provided:
AppleACPIPlatform.kext
AppleAzaliaAudio.kext
AppleDecrypt.kext
AppleSMBIOS.kext
IntelCPUPMDisabler.kext
RealtekR1000.kext

Link: http://www.mediafire.com/?aaaaaaawqaa

[chaosburn]

googlesmith, on Jul 17 2008, 02:07 PM, said:

So I've gotten this to work on a GA-EP35C-DS3R with the GA-P35-DS4 iso. You have to use ahci mode and do some other BIOS tweaks (can't really remember what I did). Everything is working fine.

hi, i have tryed the same model and iso, but the installer didn´t shows the IDE hard drives, had you notice same thing?

can i only do it with a sata HD?

Edit: done with a sata hd, but i can't see the ide drives. sound card is dead, so how can i install the kext? same method than in a "standard" hackintosh?

EDIT 2: All done, audio is ok with alcinject, IDE drives found with JMicronATA.kext. Gonna try 10.5.4

EDIT 3: All ok after update to 10.5.4, after reinstall parangon and alcinject / AppleHDA kext

[nuclear_w0rm]

Got my p0s system to install leopard retail 10.5.0 with the KABYL iso and dsmos from the genric.iso(made in windos)(somehow generic.iso didnt work for me) and booting thru the chameleon bootloader. Currently updating to 10.5.4.
my GF8400gs isnt getting recognized even after nvkush for some reason...so no QE/CI/Resolution only 1024x768....
anyways..specs:
mb = ASUS P5GCMX-1333
cpu = PENTUIM E2160 DUAL
RAM = 2GB
HDD = 160 SATA
OPTICAL = 1XSATA DVD-R, 1X IDE DVD-R
inbuilt atheros l2 dosent work so i got a RTL8139 that works after installing the driver
Audio is stereo only using AppleAzalia.kext in bootloader
usb kb+ms
one question: can i install efi from the installer that was included with chameleon on the current config?

cheers.

[Riley Freeman]

rimmi2002, on Aug 14 2008, 04:19 AM, said:

This is probably a very newbie question...but can anyone guide me to where I can get a dual boot guide with this BOOT-132 method. Right now i am running Kalyway with chain0 method. Can I still use the chain 0 method or will I have to do something different. Any input will be very helpful. Thanks.

Chain0 is working fine here. I used the one from the chameleon package. Not sure if there's any difference but if you find it doesn't work, try replacing your chain0 with that one.

[toto1234]

UPDATE 2008-08-18: ASUS-P5B-v2, does not require -f anymore

http://www.mediafire.com/?9jm2hccgm3j

MD5
e225d55095a371215d2db7078c1934a8  ASUS-P5B-v2.iso

SHA1
c39d8cb3df50540a40a3f81c29c3ec37fd10774b  ASUS-P5B-v2.iso

=============================================

This iso has been fully tested on an ASUS P5B motherboard, with
all devices working (Gigabit LAN, onboard audio, SATA, JMicron IDE,
PS/2 keyboard and nVidia 8800 GTS card) from OS X 10.5.0 to 10.5.4.

To install Mac OS X you'll need:

  * Retail install DVD (not the restore DVD you get with Apple hardware)
  * Any SATA or USB DVD drive, IDE drives do not work at the moment.

When you see the Darwin prompt, insert the OS X DVD and press Enter
a few times.

After installation is complete, you can install NVkush (in PostInstall/)
if you have an NVidia card. Use Chameleon_DFE_for_Hard_Disk.dmg to boot
from the HD directly:

  * Open the dmg and copy both .pkg and "Extra Contents" on the Desktop
  * Copy the folder "Extensions" from the CD to "Extra Contents"
  * Run Chameleon_DFE_for_Hard_Disk.pkg

In the zip I have also included the build.sh script used to create
this boot-132 CD. It depends on Linux, because for some strange reason
I prefer to use Linux on my MacBook and OS X on my regular PC :-)

=============================================

Now here's a short explanation of what each kext is for:

  * dsmos - source: BOOT-KABYL-BUMBY+dsmos.kext

This kext is required if you run Mac OS X on non-Apple hardware,
it decrypts several critical binaries (Finder, Dock, etc.).

  * ACPIPS2Nub - source: http://forum.insanel...howtopic=114578

Required if you have a PS/2 keyboard or mouse/trackpad. It's an updated
version provided by Chun-Nan, which works from 10.5.0 to 10.5.4.

  * ApplePS2Controller - source: original BOOT-KABYL-BUMBY

Required for PS/2 keyboards and mice. To make the mouse work I had to
change the following in the ApplePS2Mouse / ApplePS2Trackpad plist:
        <key>OSBundleRequired</key>
        <string>Safe Boot</string>
to:
        <key>OSBundleRequired</key>
        <string>Console</string>

  * IntelCPUPMDisabler - source: original BOOT-KABYL-BUMBY

This disables AppleIntelCPUPowerManagement.kext, and gets rid of
the "Package 0 didn't get an HPET" error message.

  * SMBIOSEnabler - source: original BOOT-KABYL-BUMBY

Provides generic information to get the hardware recognized.

  * AppleAzaliaAudio - source: http://forum.insanel...showtopic=97201

Provides support for SoundMAX onboard audio (output only).

  * IOAudioFamily and OSvKernDSPLib - source: Mac OS X 10.5.4

Original kext from 10.5.4, both are required by AppleAzaliaAudio.

  * IO80211Family-[AirPortAtheros] - source: Mac OS X 10.5.4

Original kext from 10.5.4, with a class of devices [168c:001x] added to the
plist and the version number increased.

  * IONetworkingFamily-[AppleYukon2] - source: Mac OS X 10.5.4

Original kext from 10.5.4, with one device [11ab:4364] added to the plist
and the version number increased.

  * AppleIntelPIIXATA - source: Mac OS X 10.5.4

Original kext from 10.5.4, with several ICH devices added to the plist
and the version number increased.

  * JMicronATA - source: Mac OS X 10.5.4

Original kext from 10.5.4, with a class of devices [197b:236x] added to the
plist and the version number increased.
=============================================