JaS OSx86 10.5.4 Client Server Intel SSE2 SSE3 released

Can someone PM me with JAS' Paypal info so I can send some $$$

Also PM me if you know what his needs are to keep his connection on.

What does it cost, I'd like to help.

@ {censored}: It has something to do with IONetworkingFamily, I had exactly the same problem after installation... Maybe it'll be fixed in the PPF

 

@ The Epic One: hmm that's too bad . Are you using one or multiple drives?

1 drive

I just sent some funds and I encourage anyone who actually is enjoying his work to do the same.

Every little bit helps!

@ The Epic One:

 

Make sure your DVD-drive is set as Master, not slave. Also check your jumper(s) (don't know if you're using multiple dvd/cd drives?) on your drives. Hope this helps..

 

Another question for the rest; I've installed this great release on my Acer Travelmate 430, and finally got it to work properly. I've only got one problem, USB devices are not recognized, only when they're inserted before booting. I've tried both IOUSBFamily.kext, but no luck with that. I know it could be kernel-related, but both StageXNU and 9.2.0 Sleep do not solve the problem. Anyone knows how to fix this?

 

---------------

Acer Travelmate 430, Intel P4 3.0 Ghz - only SSE2!

Intel ICH4

Hi. What ítems select in the install (kernel, chipset,,...)?

I have an ICH4 too.

computer spec.

Cpu: P.D 3.0

MB: 965P-DS3

Videocard : GF 7300GT

Ram : 4GB

i'm select :

I can install finish and boot screen apple logo but have stop icon on logo.

which one i should select to use?

thx u for ans.

im getting an disk2s2 i/o error..what does this mean?

i am getting same error while booting from DVD.

btw i am using iatkos v4 and its working fine though.

what do i do if com.apple.boot.plist is not found?

can this be because of the guid partition map?

everything went okay on MBR, now there are only 3 problems:

- Azalia says it was installed incorrectly and won't be able to work.

- My processor is recognized as 4.30 (!!!) Ghz Unknown (while it's a 2.8 Ghz Pentium D). This appears on both non-vanilla kernels.

- PS/2 keyboard doesn't work.

Thanks for the reply.. but are you sure of that?

I've also tried to disable the (only) built-in ethernet device from the bios, but it hangs after the "jnl..." lines.

I thought as a graphic problem also because there's no nvinject or natit kext in this release, unlike leo4all.

@ {censored}: It has something to do with IONetworkingFamily, I had exactly the same problem after installation... Maybe it'll be fixed in the PPF

 

@ The Epic One: hmm that's too bad . Are you using one or multiple drives?

Jas, send me PM too

Can you pm me your Paypal information. It will be a shame to have used your releases without giving anything back.

Ahhh.. this is so frustrating.. the install always freezes when it gets to 9 minutes left. (I've tried about 5 times now with different settings and stuff, also.. Kalyway 10.5.2, iATKOS v4.0i have also froze.)

I have a

ASUS P5B Deluxe

Pentium D 950 3.4GHz

4.0GB DDR2 800

nVIDIA 7950GT 512MB

40GB IDE (Trying to install on this one.)

500GB SATA

I don't get it...

This might be a stupid question, but would I be able to update to 10.5.4 JaS from 10.5.2 using this DVD? Maybe through Pacifist or something....

1 drive

Then I've no idea what to do, sorry ...

Santif; I've selected the StageXNU kernel, no custom chipset drivers - but the Intel ICH and PIIX Controller package in the "Device Identification" section. Don't know if that last package does anything, but it didn't work without that one.

{censored}; Then it looks like it's something else , though I have no idea what it could be.

Then I've no idea what to do, sorry ...

 

 

Santif; I've selected the StageXNU kernel, no custom chipset drivers - but the Intel ICH and PIIX Controller package in the "Device Identification" section. Don't know if that last package does anything, but it didn't work without that one.

 

{censored}; Then it looks like it's something else , though I have no idea what it could be.

ah, ok thanks anyways!

Sorry guys I am scrabbling a bit right now but I should be able to help with your issues soon. I hope to get things sorted by tonight if ppl keep offering support (donations) like they have been. I am also still working on the ppf while trying to get the other issue covered. I am following this thread and seeing what I can find in relation as far as a cause in the installer for each issue being posted.

JaS

Sorry guys I am scrabbling a bit right now but I should be able to help with your issues soon. I hope to get things sorted by tonight if ppl keep offering support (donations) like they have been. I am also still working on the ppf while trying to get the other issue covered. I am following this thread and seeing what I can find in relation as far as a cause in the installer for each issue being posted.

 

JaS

Thanks Jas, i'd appreciate it if you could help me aswell, as i'm the only one having this problem

And perhaps you could share your paypal email, or perhaps give us a link to a page allowing us to donate. Because there's a few donators out there that don't know how to/where to donate money to.

Thanks Jas, i'd appreciate it if you could help me aswell, as i'm the only one having this problem

 

And perhaps you could share your paypal email, or perhaps give us a link to a page allowing us to donate. Because there's a few donators out there that don't know how to/where to donate money to.

Your problem is one I am looking into along with all others posted, I can pm you my info for donations or you can click the link under my signature banner

Your problem is one I am looking into along with all others posted, I can pm you my info for donations or you can click the link under my signature banner

Ah, thanks Jas! I didn't notice the link under the sig lol.

Hey Jas, thanx for the DVD, nice work mate, one issue that, Ati 2900 package when installed (ATINDRV.kext and/or its plugins) have permissions error and doesnt not get loaded unless you chown/chmod them just to let you know... All in all looked good...

I'd like to confirm a plist.boot.error message on jmicron chip.

Thanks in advance!

Hey JaS - very nice release (although I have a custom slip for my rig) - good to see you're still active..

I donated you a lil something - and I think others should do, thats obviously a major amount of work you did putting the disk together.

Please toss me a pm when the ppf is ready, i have a few systems to test it on.

Cheers,

One

Hay Jas Just wanted to let you know that The "Still Waiting for Root" error i was getting is gone now. I injected the Nforce ATA driver in the package and it went away now i am getting a "Unknown SIGSEGV Code 0" error. I probally inject it wrong. Something that should be put in the PPF?

Thanks for the Help

sorry for asking this stupid question, but what is a PPF?

Is it a new updated release? Or is it some sort of patch we add to the iso? If it's a patch for the iso, is there a guide we can use showing us how to?

And yeah, shogren, I have the same "Still waiting for root" error.

i am getting same error while booting from DVD.

 

btw i am using iatkos v4 and its working fine though.

The iatkos v4 dvd works for me too, but i wasnt impressed with the features as the JAs dvd has!

sorry for asking this stupid question, but what is a PPF?

 

Is it a new updated release? Or is it some sort of patch we add to the iso? If it's a patch for the iso, is there a guide we can use showing us how to?

 

And yeah, shogren, I have the same "Still waiting for root" error.

yeah, a PPF is a patch applied to the ISO.. Its quite easy, just use an app like ppf-o-matic and it'll do it all for ya..

Burn the new patched image and voila!

By the way, I had the "still waiting for root device" error on my leo4allv3 install, and by doing this it worked fine:

Step 1 - Boot up DVD (assuming you have already installed the system and are able to at least boot the DVD)

Step 2 - Open Terminal from Utilities

Step 3 - You need to copy all the ATA kexts from DVD to HDD by typing:

cp -pr /Volumes/Leo4allv3/System/Library/Extensions/*ATA* /Volumes/MacHD/System/Library/Extensions/

Replace Leo4allv3 with the name of your install dvd and replace MacHD with the name of your hard drive volume.

Step 4 - set the permissions for those copied kexts:

chown -R root:wheel /Volumes/MacHD/System/Library/Extensions/*ATA*
chmod -R 755 /Volumes/MacHD/System/Library/Extensions/*ATA*

Replace MacHD with the name of your hard drive volume.

Step 5 - Remove the kextcache:

rm -rf /Volumes/MacHD/System/Library/Extensions.*

Replace MacHD with the name of your drive volume.

Step 6 - Reboot with -f boot blag to force reloading of kexts..

Worked for me

Hay Jas Just wanted to let you know that The "Still Waiting for Root" error i was getting is gone now. I injected the Nforce ATA driver in the package and it went away now i am getting a "Unknown SIGSEGV Code 0" error. I probally inject it wrong. Something that should be put in the PPF?

 

Thanks for the Help

Yeah this will also be fixed with the ppf

The problem was 90% of my testers hit and ran, So I had to think that they got it working and didn't bother to report back. I it good to see all the reports now and I will be fixing the problems,. A really solid release usually takes one or two ppf's to become a classic

thanks to the two users that have donated every bit helps I am pressing the isp for an extension, I will see what happens.

JaS

The iatkos v4 dvd works for me too, but i wasnt impressed with the features as the JAs dvd has!

Sorry to hear that, glad you found a release you like. I have to say this is not a compitition for me, I do it for fun and to help ppl out. Also to keep the community going. OSX86 is all about what works for you, and what you want to put work into.

JaS