CwickStylz Posted January 3, 2009 Share Posted January 3, 2009 Hi all! I'm a Noob & was hoping someone could comment on my system config & this release's compatibility. I am using an HP dx2400 w/ 2.53 Ghz E7200 processor, Intel G33 Express chipset, 4GB of RAM, 2 x 160GB SATA HD's, SATA DVD+- Sound Blaster Audigy sound card, NVIDIA GeForce 7300 SE/7200 GS If anyone has had any experience with this or a similar setup, I sure would appreciate any input you have. Thank you so much! Link to comment Share on other sites More sharing options...
Deetex Posted January 4, 2009 Share Posted January 4, 2009 Got a question... My hardware(PC): Mobo: Asus P5E WS Pro CPU: Intel Q6600 Quad(MMX, SSE,SSE2,SSE3, SSSE3, EM74T) RAM: 4 sticks of GEiL DDR2 1066 1Gb Graphics: Ati Radeon HD 4870 1Gb. Sound: Onboard ALC 886 Disk Drives. Hard: WD Caviar 500Gb Sata Optical: LG brand HL-DT-ST DVD-Ram drive, SAta interface. and various peripheral hardware... PhysX card, TV Tuner, mouse and keyboard, obviously. A: Will the current release run on my system? and B: Is this the correct thread for this? Link to comment Share on other sites More sharing options...
pyuser Posted January 4, 2009 Share Posted January 4, 2009 Compal FL90 - Installed on external hard drive without problems - nVidia 8600 GT works in 1024 x 768 (to be checked) - iwl3945 not detected after driver install (to be checked) - system doesn't detect temperature sensors and/or fans - fans doesn't run and the laptop overheat - no sound (sound card detected) (to be checked) Link to comment Share on other sites More sharing options...
sovy Posted January 4, 2009 Share Posted January 4, 2009 Hi kaly, I followed your instructions but my graphics still don't work. Durring install I choose NVIDIA only. I also started in single user mode, moved the video drivers but no luck so far with Asus EN7300GT. What can I do wrong? Thanks, Sovy Gigabyte GA-945GCM-S2L - Intel Core 2 Duo E4500, 2200 MHz - 2x512MB RAM - Asus EN7300GT nVIDIA VGA Link to comment Share on other sites More sharing options...
Qbeck Posted January 4, 2009 Share Posted January 4, 2009 @kip4 same thing with me Link to comment Share on other sites More sharing options...
Jritt Posted January 5, 2009 Share Posted January 5, 2009 Hello, i have done this installation before and then i removed it. I do not remember exactly how i installed it. Now, i am trying to install it again but i cannot get as far as booting the DVD. I have tried everything from -v to using a different kernel such as the speedstepkernel. Sometimes, it stops scrolling and stays like this forever: BSD root: disk1s2, major 14, minor 6. Another thing that happens is that it stops and says something about my main HD. I have a Toshiba Satellite A215 with an AMD processor. Please help me! Link to comment Share on other sites More sharing options...
ModdTaco Posted January 6, 2009 Share Posted January 6, 2009 Anyone know if there is a Kalyway 10.5.6 update? Link to comment Share on other sites More sharing options...
Streetlight Posted January 6, 2009 Share Posted January 6, 2009 Where do you actually download the file? I can't see anywhere that is obvious to DL it Link to comment Share on other sites More sharing options...
mcauleyj Posted January 7, 2009 Share Posted January 7, 2009 I just burned into a DVD a new downloaded image of Kalyway DVD. I confirmed the md5. I still have the same problemI tested in all modes, I got stuck all the time. I Got a Asus m50vn. Hi there, I had the same problem on a dell Latitude d610, couldnt get Kalyway 10.5.2 DVD to to boot into the installer. Downloaded kalyway 10.5.1 and this worked fine. i found booting with an external display connected & the switchs -x -F -cpus=1 worked pretty well. Updated to 10.5.2 via combo update successfully. I dont have networking going yet & a lot of apps such as ical, chess etc crash on startup - others are fine. John Link to comment Share on other sites More sharing options...
Gokciim Posted January 8, 2009 Share Posted January 8, 2009 does this program support my processor? it is a Mobile AMD Sempron processor 3500+ 1,8 GHZ 512 L2 cache? can i use this mac to my pc? Link to comment Share on other sites More sharing options...
fedejmz Posted January 8, 2009 Share Posted January 8, 2009 Hi, i'm new on this and i wanted to know if this ISO will work on my pc: Mother Board: ASRock ALiveNF6G-VSTA Procesador: Amd x2 4000+ Video: NVIDIA GeForce 6150SE/nForce 430 Chipset Audio: HDA ALC888 Lan: nVidia nForce Network Controller WiFi: Realtek RTL8185 54M Teclado Muose ps2 Ram: 4 GB Disco 320 Gb ATA Thanks, hope to work Link to comment Share on other sites More sharing options...
keny312 Posted January 8, 2009 Share Posted January 8, 2009 great job :P Link to comment Share on other sites More sharing options...
neophyte88 Posted January 11, 2009 Share Posted January 11, 2009 I'm somewhat new to the OSx86 community, and was wondering if its possible to change to wifi drivers after installing? Also, I have to safe boot every time I start up my hackintosh. I think its because of my firewire port, which I don't use. I think this because there is an error about my firewire when I boot the computer, and it hangs if I don't do safe boot. Can anyone tell me why this is? Any help would be appreciated. BTW, I forgot to mention my machines specs. Intel P4(Prescott) 3.0GHz processor HP mobo with American Megatrends BIOS Nvidia graphics card with 256MB RAM 1.3GB system RAM Western Digital WD400 harddrive Any questions should be directed to my e-mail, andylibby1916@gmail.com. Link to comment Share on other sites More sharing options...
sirNemanjapro Posted January 11, 2009 Share Posted January 11, 2009 Kaly, merry me! But please, first update my distro to 10.5.6. Link to comment Share on other sites More sharing options...
Yatten Posted January 12, 2009 Share Posted January 12, 2009 I've been trying to get kalyway 10.5.2 to work on my system...but with mixed results. Depending on the options i select during install i get either: (a) grey apple screen (if i dont select legacy flag) ( "still waiting for root device" or © the applenforceata found 0 units code (if i leave that mobo selection checked)... also: I get "appleUSBHCI: unable to inittialize UIM" in the script I've noticed. or can someone enlighten me on which boxes to check during installation or any other helpful ideas...I've been making a chart on what boxes I tick and the results but havent found the right combo yet... system: Athlon64 X2 4600+ / Asus M2N8-VMX 2 GB Memory 667 / 9400GT 320 GB sata Drives also: dual-booting with vista Link to comment Share on other sites More sharing options...
trimp Posted January 12, 2009 Share Posted January 12, 2009 Hi. can anybody tell me if this DVD will work on my PC or it's better that I install tiger? Pentium 4 3.00 GHZ SEE3 Video card ATI Radeon X300/X550/X1050 Series PCI\VEN_1002&DEV_5B60&SUBSYS_0F021002&REV_00\4&166AB6CD&0&0008 (PCI-Express) 1 GB ram Thank you. Link to comment Share on other sites More sharing options...
d4money1 Posted January 12, 2009 Share Posted January 12, 2009 OK...guys these are the specs for my Gateway Notebook pc Gateway MT3421 1GB RAM 120 GB ATA Notebook hard drive NVIDIA GeForce Go 6100 Standard PS/2 Keyboard Synaptics PS/2 port Touchpad NVIDIA nForce Networking Controller Realtek 8185 Extensible 802.11b/g wireless device AMD Turioun 64 Mobile Technology MK-38 SigmaTel High Definition Audio Codec So could somebody be nice and help me out and tell me the configuration i would need to install OSX with? Thanks in advance Link to comment Share on other sites More sharing options...
Yatten Posted January 13, 2009 Share Posted January 13, 2009 my only problem is my sound card.. it show that that i have no audio output device.. how should i solve this? Board: ASUS M2N8-VMX Audio • Azalia ALC883-GR High Difinition Audio 6-channel CODEC (is this my sound card? ) its my first time using a MAC that's why I'm not yet familiar.. and also where can i uninstall programs? sorry for such inquiry.. thanks.. Link to comment Share on other sites More sharing options...
subbarao Posted January 13, 2009 Share Posted January 13, 2009 PLEASE HELP! Edit: Ok, I got it started and got to the installer. I bought an external hard drive (320GB Western Digital) to install this on so I don't mess up my original hard drive, but when I go to disk utilities in installer, I doesn't show up. Is this because it is connected thru a USB port? If this is the case, how else can I connect it? PLEASE HELP!! System: Processor BrandIntel® Processor PlatformIntel® Centrino® ProcessorIntel® Core™2 Duo Mobile Processor Speed2.0GHz Display TypeWXGA TFT-LCD widescreen with TruBrite technology (1280 x 800) Screen Size15.4" System Bus800MHz Cache Memory2MB on die Level 2 System Memory (RAM)4GB Type of Memory (RAM)PC6400 DDR2 SDRAM Hard Drive TypeSerial ATA (5400 rpm) Hard Drive Size320GB Optical DriveDouble-layer DVD±RW/CD-RW Optical Drive Speeds8x DVD+R DL; 6x DVD-R DL; 8x8x8 DVD+RW; 8x6x8 DVD-RW; 5x DVD-RAM; 24x16x24 CD-RW Direct-Disc LabelingYes Digital Media Reader or SlotsYes, digital media card reader GraphicsATI Mobility RADEON HD 3470 Video Memory256MB discrete and up to 1790MB dynamically allocated memory (2046MB total) Personal Video Recorder (PVR)No TV TunerNo MPEGYes Built-in WebcamYes Modem56 Kbps* *Capable of receiving 56 Kbps downloads. However, current regulations limit download speed to 53 Kbps. NetworkingBuilt-in 10/100 Mbps Ethernet LAN (RJ-45 connector) Wireless NetworkingWireless-A+B+G+N Bluetooth-EnabledNo S-Video Outputs1 Additional Audio/Video ConnectorsHDMI AudioHarman/Kardon SpeakersBuilt-in PCMCIA Slots1 ExpressCard/34/54 USB 2.0 Ports3 IEEE 1394 FireWire Ports1 Parallel PortsNone Serial PortsNone Game PortsNone Laptop WeightStandard (more than 5.5 lbs.) Battery TypeLithium-ion Pointing DeviceTouchpad Operating SystemWindows Vista Home Premium 64-bit with SP1 Did you connect it to your computer before switching on? If you connect when you go into Disk Utilities, it does not show up. I am using 160 GB USB HDD for Mac OS X and it is working perfectly well. Link to comment Share on other sites More sharing options...
Bongki Posted January 13, 2009 Share Posted January 13, 2009 Hi, I manage to install Kalyway and Jas Client Server but after installing it says HSF+ERROR Is anybody here know this problem? Here is my Specs: P5Q- using Bios 1611 by Juzzi Q6600 2x1 GB OCZ Ram 250 Seagate HDD SATA 2x Asus SATA DVD Burner Link to comment Share on other sites More sharing options...
OutlaW666 Posted January 14, 2009 Share Posted January 14, 2009 hello and good night i am very new to the idea of installing OSX in a pc , my gf has been a mac user for ever. I used to be a pc fan, but since i was introduced to mac, it changed my life. I have a Dell laptop, and i just got somekind of self-restoring trojan that messed up my windows logon file. I had just about enough with Windows. I really want to get Leopard to work in my laptop, can someone help a newbie in this pc-mac world ? i understand if no one helps me out, t's allways a pain to help out newbies, but hey ... at least i try to learn thanks in advance (im portuguese, sorry for the english) Link to comment Share on other sites More sharing options...
bekmate Posted January 16, 2009 Share Posted January 16, 2009 Hi! I'm just downloaded the MAC OSX86 Kalyway AMD INTEL SS2 SS3 10.5.2, iATKOS V4A (AMD 10.5.4) OS, and I want to know, what drivers should I installed with the OS. My configuration Gigabyte P35C-DS3R Core2Duo E6750 GeForce 9600GT 2GB 800MHz memory Link to comment Share on other sites More sharing options...
infest Posted January 17, 2009 Share Posted January 17, 2009 Thanks Link to comment Share on other sites More sharing options...
xto Posted January 19, 2009 Share Posted January 19, 2009 I have install Kalyway 10.5.2 and upgraded to 10.5.5 and working fine except touchscreen and wifi. Now i am trying to upgrade to 10.5.6 but it is giving me an error indicating AppleACPIPci is not compatible. Been researching here for over a month now and trying all (i think) the guided found in this forum. but still i'm getting negative results. My notebook is Lenovo X61T Multi-touch/Multi-View. Link to comment Share on other sites More sharing options...
karosu Posted January 19, 2009 Share Posted January 19, 2009 well here we go D:!! thx !!! 1st try xD Link to comment Share on other sites More sharing options...
Recommended Posts