Jump to content

Atheros Network Drivers

TheMaxx32000

By TheMaxx32000,
in LAN and Wireless

 Share
381 posts in this topic

Recommended Posts

osmthi
osmthi
Posted
Posted

I'm sorry guys, but I also desperately need help with my Atheros wireless card. I've done everything, but it is listed in the System Profiler.

 

Things I've Done:

- Copied the two kext files from the 10.4.5 intel update into the Extensions folder.

- Chmodded and chrowned the IO80211Family.kext file.

- Edited the NetworkInterface file (en0 to en1) (actually, the file didn't exist and I created it)

- Repaired permissions on the Mac disk.

 

My computer specs:

- Toshiba Satellite A55-S106

- 1.4 GHz Intel Celeron M

- 512 MB SDRAM

 

And here is the info for my wireless card from the terminal:

 

	| |   |   +-o LAN@8  <class IOPCIDevice, registered, matched, active, busy $
| |   |	   {
| |   |		 "built-in" = <00>
| |   |		 "IODeviceMemory" = (({"address"=18446744072904175616,"lengt$
| |   |		 "device-id" = <3d100000>
| |   |		 "IOChildIndex" = 5
| |   |		 "name" = "ethernet"
| |   |		 "acpi-path" = "IOACPIPlane:/_SB/PCI0@0/PCIB@1e0000/LAN@8000$
| |   |		 "IOName" = "ethernet"
| |   |		 "vendor-id" = <86800000>
| |   |		 "revision-id" = <83000000>
| |   |		 "subsystem-vendor-id" = <79110000>
| |   |		 "IOInterruptControllers" = ("8259-pic")
| |   |		 "Power Management private data" = "{ this object = 02520d00$
| |   |		 "Power Management protected data" = "{ theNumberOfPowerStat$
| |   |		 "acpi-reg" = <00400000>
| |   |		 "class-code" = <00000200>
| |   |		 "compatible" = <"pci1179,1","pci8086,103d","pciclass,020000$
| |   |		 "subsystem-id" = <01000000>
| |   |		 "assigned-addresses" = <104001020000000000f0fecf00000000001$
| |   |		 "reg" = <00400100>
| |   |		 "IOInterruptSpecifiers" = (<0b00000007000000>)
| |   |	   }

 

Thank you so much to anyone who helps me with this.

mickles
mickles
Posted
Posted

Could someone please send me the 10.4.3 IONetworkingFamily.kext?

mickles at gmail dot com.

 

Incidentally, on 10.4.6 using 10.4.5's IO80211Family, the Atheros kext recognizes the card (168c,0013) and loads, but the card isn't recognized by the system profiler etc. I presume the 10.4.3 IONetworkingFamily might fix this. If anyone else has any other experience or ideas, let me know.

nekton
nekton
Posted
Posted

The Planex GW-DS54SGX PCI card (about $35) uses the Atheros 5212 chip and has the device ID 0x168c and Vendor ID 0x0013. It works fine as a standard Airport card (click Network in System Preferences first) under 10.4.5 but not under 10.4.7. To remedy, just open the plist in the AirportAtheros5424.kext of the IO80211Family.kext and add the line:

 

<string>pci168c,13</string>

 

to the bottom of the following

 

<key>IONameMatch</key>

<array>

<string>pci106b,0086</string>

<string>pci168c,1c</string>

 

to give

 

<key>IONameMatch</key>

<array>

<string>pci106b,0086</string>

<string>pci168c,1c</string>

<string>pci168c,13</string>

 

 

Save and reboot.

 

pci168 is derived from the Device ID and 13 is derived from the Vendor ID. If yours are different, edit accordingly.

  • 2 weeks later...
appleguru
appleguru
Posted
Posted
The Planex GW-DS54SGX PCI card (about $35) uses the Atheros 5212 chip and has the device ID 0x168c and Vendor ID 0x0013. It works fine as a standard Airport card (click Network in System Preferences first) under 10.4.5 but not under 10.4.7. To remedy, just open the plist in the AirportAtheros5424.kext of the IO80211Family.kext and add the line:

 

<string>pci168c,13</string>

 

to the bottom of the following

 

<key>IONameMatch</key>

<array>

<string>pci106b,0086</string>

<string>pci168c,1c</string>

 

to give

 

<key>IONameMatch</key>

<array>

<string>pci106b,0086</string>

<string>pci168c,1c</string>

<string>pci168c,13</string>

 

 

Save and reboot.

 

pci168 is derived from the Device ID and 13 is derived from the Vendor ID. If yours are different, edit accordingly.

 

 

Ok, I tried this with my belkin F5D7000 with atheros chipset.. the number I got from ioreg was pci168c,1a. I added it to the plist, fixed permissions, and tried to kextload.. but I got a superclass error! Loading the unmodified kext still gives the same error. Any ideas? I have a feeling ti has to do with me running 10.4.7... Any tips would be much appreciated!

head
head
Posted
Posted
Got it working!!

 

Needed the 10.4.3 IONetworkingFamily.kext and the IO80211Family.kext from the install DVD (10.4.5 I think?) Edited the plist, cleared the kextcache and all was well after rebooting! Wireless!!!! woohoo!

 

where do i get these files? do i have to download all the dvd´s only to extract those files?

aries77
aries77
Posted
Posted

Sorry if this is a really stupid question. But I downloaded the 10.5 Intel update and am using Pacifist...but where on earth do I search for the two files that I need? IONetworkingFamily and IO80211Family.kext? I don't see them? Are they within some other compressed folder? Any tips please? Or can someone email me them? I'm trying to get a D-Link DWL-G650 card to work. TIA

thebob
thebob
Posted
Posted

IO80211Family.kext and IONetworkingFamily.kext from the 10.4.5 Intel download worked like a charm for Atheros 5005g internal wireless on my Toshiba Satellite A85.

 

Used Pacifist to install both files, removed Extensions.mkext & Extensions.kextcache and rebooted.

  • 2 weeks later...
br0adband
br0adband
Posted
Posted

Well I gave that a shot, thebob. Using the .6 HOTiSO release with the JaS .7 update, all software updated, including iLife '06... Pacifist replaces the kexts, that's fine, and I deleted the Extensions stuff as instructed, but upon rebooting it seems if OSX just doesn't even notice the card I have - the D-Link DWL-630 which is Atheros 5005 based.

 

Way back with the 10.4.3 release from JaS, it worked like a charm from the first boot. Funny thing is so did the internal modem on this Dell Inspiron 4150. The modem worked! But just for that first reboot after the installation, for some reason. After I rebooted *again*, the modem never worked again nor was seen again.

 

I tried flushing all the kexts, etc... no go. Still no hardware noticed by OSX. Kinda weird. Maybe I should try the kexts from that 10.4.3 release that worked for me in the past.

 

Now on to the QE stuff... hopefully I can manage that or at least some OpenGL functionality: I want to see what iWeb can do but I can't even get it to run so far. :D

  • 2 weeks later...
mac10
mac10
Posted
Posted

Wow, thanks to everyone who contributed to this thread, I now have my Atheros ar5005g working after installing OS X using the new JaS 10.4.7 disc.

 

I'm not actually sure what it was that made it work it was either replacing the IO80211Family.kext with the 10.4.5 one or changing the en0 entry to en1 NetworkInterfaces.plist. Or maybe it was both, I now have pci lan nic as en1 and atheros wireless as en2?

 

Anyway thanks again, that means everything is now working on my Acer Travelmate 2410 Laptop! :hysterical:

leo2k
leo2k
Posted
Posted

hi,

i have a atheros AR5212A-00 chip.

i've installed JaS 10.4.6 an copied these two kext from the 10.4.5 intel update over. but it doesn't work.

i haven't got this file where i could change en0 to en1.

i don't know where i can see the device id, its not listed in the system profiler.

 

leo

V Mon Heros
V Mon Heros
Posted
Posted

Hey, I had exactly the same problem!!!

 

No file to change en0 in en1. So, for me, the only manner to have thing working was to work on the recognition of my network card!!!

 

When these one was recognize, it was assigned to en0, anf the Atheros WI-FI card was so in en1.

 

Sorry if I don't help you a lot, but for me it was the solution.

zedzed
zedzed
Posted
Posted

I tried the things mentioned here

for SMCWPCIT-G card which is AR5212 based card

 

including changing the info.plist file

and the EN0 to EN1 thing

 

No joy - no working

 

Now though when I boot up I am told that the info.plist file was not installed right

 

but I did delete the kextchache file and I did do the disk repair thing

 

Arrrggghhh

TNCEKM
TNCEKM
Posted
Posted
i'll just post how i got my ar5212 working (163c0013, i think) for 10.4.3. x86.

 

download the 10.4.5 update and get the kext (io80211family.kext) from archive.pax.gz (if i remember correctly). it will only work (for me anyway) if you use the original ionetworkfamily.kext that installed with 10.4.3. put this kext into \system\library\extensions\ . Then in terminal type:

 

sudo -s

 

chmod -R 755 io80211family.kext

chown -R root:wheel io80211family.kext

 

then restart and it should just work, set up from system preferences.

OMFG I want to thank you soooo much for this one! Jesus! I"ve been doign this for DAYS!

mcfresh
mcfresh
Posted
Posted

Hi!

 

Ive got a Atheros based DWL-520 (RevA/1) PCI card runnin on 10.4.6 (that's what im using right now :P).

This cards shows up in the 10.4.5_HCL but in 10.4.6_HCL it reads all RevA not working. Thats not true. This cards runs nearly perfect under 10.4.6.

 

Here is how:

 

If u follow the guide here to use IONetworkingfamily.kext and IO80211.kext from 10.4.5, u wont succeed with this card. Instead KEEP your IONetworkingfamily.kext and only use IO80211.kext from 4.5.

THATS IT! Your card will be detected as aiport! Although i wasn't able to get WEP runnin, but it works!

 

So, you can add this card to the HCL_10.4.6. too , as it is already listed in den HCL_10.4.5.

  • 2 weeks later...
UltimateOne
UltimateOne
Posted
Posted

I have a Toshiba P25-S507 Laptop. I successfully created a dual boot Windows/OSX 10.4.6 system and was able to get the video & sound working great. Even the built in ethernet works perfectly. Wireless networking has got me stumped...

 

The laptop has integrated Atheros AR5001X MiniPCI Wireless which works perfectly in Windows mode. I've tried following some of the postings on this board, but am mixed up now. I've tried moving the kext files, changing the en0/1 thing...but still cant get it to work!!!

 

What's the fix? If you have another recommended kext file, please let me know or upload/email (gpintus at yahoo.com). I'm still learning the ropes when it comes to the OSX world.

 

Thanks!

mr_christer
mr_christer
Posted
Posted

i know your problem,

 

atheros wifi not working under osx 10.4.6 took some time to get it fixed!

i can't remember where i finally got this kext from, but with this kext my atheros was finally recognized as airport (even though when i click on airport in system profiler i get a text saying no information availible)

i'm gonna send you the 80211.kext. remember to fix permissions using the chmod command mentioned earlier!

 

good luck,

chris

poplars
poplars
Posted
Posted

hi I just bought an ATHEROS AR5002 mini-pci wireless card, I was wondering if it is compatable with these drivers?

 

thanks

DavidT
DavidT
Posted
Posted

hmm... another question for you guys.

 

I have a D-Link DWL-G132 which has an Atheros based chip in it, but it's not being detected. I'm running 10.4.8 right now, so shouldnt the drivers that were in 10.4.5 be in this version? or do I still need to install the ones from 10.4.5?

 Share
Go to topic listing
×
×
  • Create New...