[pre-release] macOS Ventura

[MifJpnAlphaPlus]

4 hours ago, Cyberdevs said:

@MifJpnAlphaPlus

Try this, test it on a USB disc first and if it works you can replace your own efi.

For the audio it's better to use the DeviceProperties rather than injecting it via nvram.

OC.zip 9.08 MB · 4 downloads

Thank you so much!

I forgot to remove Layout-Id from DeviceProperties.

 

 

2 hours ago, 5T33Z0 said:

@MifJpnAlphaPlus You don't have the latest Kexts and OpenCore is outdated as well:

 

 

Once again, I admire your writing talent for explanations.

I didn't think OC-AT was so good. To be honest, I was surprised!
Someone who is a little careless like me will notice this post.😄

Your efforts have made me super understand!

Thank you!!

Edited June 18, 2022 by MifJpnAlphaPlus

[D3v1L]

19 minutes ago, PoMpIs said:

Guys, many times when I start Ventura, the computer shuts down before reaching the desktop, giving the following kernel panic

{"bug_type":"210","timestamp":"2022-06-18 19:40:08.00 +0200","os_version":"macOS 13.0 (22A5266r)","roots_installed":0,"incident_id":"2D76588D-3DA6-4C04-80DA-F0AB97E42773"}
{"macOSProcessedStackshotData":"bm8gb24gZGlzayBwYW5pYyBzdGFja3Nob3QgZm91bmQgaW4gY29yZWZpbGU=","macOSPanicString":"panic(cpu 2 caller 0xffffff7fa81862a8): \"[3:0:0][PPLIB] Failed to send PPLIB IRI to Accelerator.\n\" @AmdRadeonController.cpp:2001\nPanicked task 0xffffff8baf3035b8: 10 threads: pid 168: WindowServer\nBacktrace (CPU 2), panicked thread: 0xffffff907aff0a70, Frame : Return Address\n0xffffffab5165b500 : 0xffffff801b1323dd \n0xffffffab5165b550 : 0xffffff801b29ab56 \n0xffffffab5165b590 : 0xffffff801b289df0 \n0xffffffab5165b5e0 : 0xffffff801b0cd951 \n0xffffffab5165b600 : 0xffffff801b1326bd \n0xffffffab5165b6f0 : 0xffffff801b131d69 \n0xffffffab5165b750 : 0xffffff801b91613b \n0xffffffab5165b840 : 0xffffff7fa81862a8 \n0xffffffab5165b950 : 0xffffff7fa8147fc9 \n0xffffffab5165b990 : 0xffffff7fa8185146 \n0xffffffab5165b9e0 : 0xffffff7fa814c870 \n0xffffffab5165ba40 : 0xffffff7fb0fcacf9 \n0xffffffab5165bad0 : 0xffffff7fa814c7fc \n0xffffffab5165baf0 : 0xffffff7fb0fc0f0e \n0xffffffab5165bb80 : 0xffffff801b8177dc \n0xffffffab5165bbe0 : 0xffffff801b887dd7 \n0xffffffab5165bc50 : 0xffffff801b241257 \n0xffffffab5165bca0 : 0xffffff801b10a806 \n0xffffffab5165bd50 : 0xffffff801b123218 \n0xffffffab5165bdc0 : 0xffffff801b12393a \n0xffffffab5165bef0 : 0xffffff801b26cd4a \n0xffffffab5165bfa0 : 0xffffff801b0cddb6 \n      Kernel Extensions in backtrace:\n         com.apple.iokit.IOGraphicsFamily(597.0)[1418696D-9CF9-3249-B6B4-CA695BF037F6]@0xffffff7fb0fb0000->0xffffff7fb0fdefff\n            dependency: com.apple.iokit.IOPCIFamily(2.9)[98643CEB-CCC7-3DA8-B1DE-0C82D4D28F2B]@0xffffff801dbfc000->0xffffff801dc2afff\n         com.apple.kext.AMDRadeonX6000Framebuffer(4.0.9)[97BFB693-7A25-3C1D-A3B4-B33F335DA4F1]@0xffffff7fa8137000->0xffffff7fa83c0fff\n            dependency: com.apple.AppleGraphicsDeviceControl(7.1.14)[B3BE5F58-0040-3606-907A-FFE6385C38C1]@0xffffff7faff0a000->0xffffff7faff0dfff\n            dependency: com.apple.iokit.IOACPIFamily(1.4)[62C52EB0-4D0B-3A00-B4B0-A1841EA15AB4]@0xffffff801d78c000->0xffffff801d78dfff\n            dependency: com.apple.iokit.IOGraphicsFamily(597)[1418696D-9CF9-3249-B6B4-CA695BF037F6]@0xffffff7fb0fb0000->0xffffff7fb0fdefff\n            dependency: com.apple.iokit.IOPCIFamily(2.9)[98643CEB-CCC7-3DA8-B1DE-0C82D4D28F2B]@0xffffff801dbfc000->0xffffff801dc2afff\n\nProcess name corresponding to current thread (0xffffff907aff0a70): WindowServer\nBoot args: -v agdpmod=pikera unfairgva=1\n\nMac OS version:\n22A5266r\n\nKernel version:\nDarwin Kernel Version 22.0.0: Tue May 24 20:31:35 PDT 2022; root:xnu-8792.0.50.111.3~5\/RELEASE_X86_64\nKernel UUID: 198748B0-2858-345A-957A-45C9ACB4C2F2\nroots installed: 0\nKernelCache slide: 0x000000001ae00000\nKernelCache base:  0xffffff801b000000\nKernel slide:      0x000000001ae10000\nKernel text base:  0xffffff801b010000\n__HIB  text base: 0xffffff801af00000\nSystem model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)\nSystem shutdown begun: NO\nPanic diags file available: YES (0x0)\nHibernation exit count: 0\n\nSystem uptime in nanoseconds: 18527074634\nLast Sleep:           absolute           base_tsc          base_nano\n  Uptime  : 0x00000004504cba96\n  Sleep   : 0x0000000000000000 0x0000000000000000 0x0000000000000000\n  Wake    : 0x0000000000000000 0x0000000e78fe33ed 0x0000000000000000\nCompressor Info: 0% of compressed pages limit (OK) and 0% of segments limit (OK) with 0 swapfiles and OK swap space\nZone info:\n  Zone map: 0xffffff80795cc000 - 0xffffffa0795cc000\n  . PGZ   : 0xffffff80795cc000 - 0xffffff807d5cd000\n  . VM    : 0xffffff807d5cd000 - 0xffffff8549900000\n  . RO    : 0xffffff8549900000 - 0xffffff86e2f66000\n  . GEN0  : 0xffffff86e2f66000 - 0xffffff8baf299000\n  . GEN1  : 0xffffff8baf299000 - 0xffffff907b5cc000\n  . GEN2  : 0xffffff907b5cc000 - 0xffffff95478ff000\n  . GEN3  : 0xffffff95478ff000 - 0xffffff9a13c32000\n  . DATA  : 0xffffff9a13c32000 - 0xffffffa0795cc000\n  Metadata: 0xffffffcb92096000 - 0xffffffcbb2096000\n  Bitmaps : 0xffffffcbb2096000 - 0xffffffcbbe096000\n\n\n\n"}

And it only happens with RX6600, with RX6650XT it always goes well... does anyone understand that Panic?

 

 

 

try, if you have it, to REMOVE (not Auto or other but, no/nein xD ) XMP1 ram profile...i remember my 5700 make same error...and resolve with this...

[chris1111]

Old Clover works for macOS Ventura 13  

[Guest 5T33Z0]

37 minutes ago, PoMpIs said:

Guys, many times when I start Ventura, the computer shuts down before reaching the desktop, giving the following kernel panic

{"bug_type":"210","timestamp":"2022-06-18 19:40:08.00 +0200","os_version":"macOS 13.0 (22A5266r)","roots_installed":0,"incident_id":"2D76588D-3DA6-4C04-80DA-F0AB97E42773"}
{"macOSProcessedStackshotData":"bm8gb24gZGlzayBwYW5pYyBzdGFja3Nob3QgZm91bmQgaW4gY29yZWZpbGU=","macOSPanicString":"panic(cpu 2 caller 0xffffff7fa81862a8): \"[3:0:0][PPLIB] Failed to send PPLIB IRI to Accelerator.\n\" @AmdRadeonController.cpp:2001\nPanicked task 0xffffff8baf3035b8: 10 threads: pid 168: WindowServer\nBacktrace (CPU 2), panicked thread: 0xffffff907aff0a70, Frame : Return Address\n0xffffffab5165b500 : 0xffffff801b1323dd \n0xffffffab5165b550 : 0xffffff801b29ab56 \n0xffffffab5165b590 : 0xffffff801b289df0 \n0xffffffab5165b5e0 : 0xffffff801b0cd951 \n0xffffffab5165b600 : 0xffffff801b1326bd \n0xffffffab5165b6f0 : 0xffffff801b131d69 \n0xffffffab5165b750 : 0xffffff801b91613b \n0xffffffab5165b840 : 0xffffff7fa81862a8 \n0xffffffab5165b950 : 0xffffff7fa8147fc9 \n0xffffffab5165b990 : 0xffffff7fa8185146 \n0xffffffab5165b9e0 : 0xffffff7fa814c870 \n0xffffffab5165ba40 : 0xffffff7fb0fcacf9 \n0xffffffab5165bad0 : 0xffffff7fa814c7fc \n0xffffffab5165baf0 : 0xffffff7fb0fc0f0e \n0xffffffab5165bb80 : 0xffffff801b8177dc \n0xffffffab5165bbe0 : 0xffffff801b887dd7 \n0xffffffab5165bc50 : 0xffffff801b241257 \n0xffffffab5165bca0 : 0xffffff801b10a806 \n0xffffffab5165bd50 : 0xffffff801b123218 \n0xffffffab5165bdc0 : 0xffffff801b12393a \n0xffffffab5165bef0 : 0xffffff801b26cd4a \n0xffffffab5165bfa0 : 0xffffff801b0cddb6 \n      Kernel Extensions in backtrace:\n         com.apple.iokit.IOGraphicsFamily(597.0)[1418696D-9CF9-3249-B6B4-CA695BF037F6]@0xffffff7fb0fb0000->0xffffff7fb0fdefff\n            dependency: com.apple.iokit.IOPCIFamily(2.9)[98643CEB-CCC7-3DA8-B1DE-0C82D4D28F2B]@0xffffff801dbfc000->0xffffff801dc2afff\n         com.apple.kext.AMDRadeonX6000Framebuffer(4.0.9)[97BFB693-7A25-3C1D-A3B4-B33F335DA4F1]@0xffffff7fa8137000->0xffffff7fa83c0fff\n            dependency: com.apple.AppleGraphicsDeviceControl(7.1.14)[B3BE5F58-0040-3606-907A-FFE6385C38C1]@0xffffff7faff0a000->0xffffff7faff0dfff\n            dependency: com.apple.iokit.IOACPIFamily(1.4)[62C52EB0-4D0B-3A00-B4B0-A1841EA15AB4]@0xffffff801d78c000->0xffffff801d78dfff\n            dependency: com.apple.iokit.IOGraphicsFamily(597)[1418696D-9CF9-3249-B6B4-CA695BF037F6]@0xffffff7fb0fb0000->0xffffff7fb0fdefff\n            dependency: com.apple.iokit.IOPCIFamily(2.9)[98643CEB-CCC7-3DA8-B1DE-0C82D4D28F2B]@0xffffff801dbfc000->0xffffff801dc2afff\n\nProcess name corresponding to current thread (0xffffff907aff0a70): WindowServer\nBoot args: -v agdpmod=pikera unfairgva=1\n\nMac OS version:\n22A5266r\n\nKernel version:\nDarwin Kernel Version 22.0.0: Tue May 24 20:31:35 PDT 2022; root:xnu-8792.0.50.111.3~5\/RELEASE_X86_64\nKernel UUID: 198748B0-2858-345A-957A-45C9ACB4C2F2\nroots installed: 0\nKernelCache slide: 0x000000001ae00000\nKernelCache base:  0xffffff801b000000\nKernel slide:      0x000000001ae10000\nKernel text base:  0xffffff801b010000\n__HIB  text base: 0xffffff801af00000\nSystem model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)\nSystem shutdown begun: NO\nPanic diags file available: YES (0x0)\nHibernation exit count: 0\n\nSystem uptime in nanoseconds: 18527074634\nLast Sleep:           absolute           base_tsc          base_nano\n  Uptime  : 0x00000004504cba96\n  Sleep   : 0x0000000000000000 0x0000000000000000 0x0000000000000000\n  Wake    : 0x0000000000000000 0x0000000e78fe33ed 0x0000000000000000\nCompressor Info: 0% of compressed pages limit (OK) and 0% of segments limit (OK) with 0 swapfiles and OK swap space\nZone info:\n  Zone map: 0xffffff80795cc000 - 0xffffffa0795cc000\n  . PGZ   : 0xffffff80795cc000 - 0xffffff807d5cd000\n  . VM    : 0xffffff807d5cd000 - 0xffffff8549900000\n  . RO    : 0xffffff8549900000 - 0xffffff86e2f66000\n  . GEN0  : 0xffffff86e2f66000 - 0xffffff8baf299000\n  . GEN1  : 0xffffff8baf299000 - 0xffffff907b5cc000\n  . GEN2  : 0xffffff907b5cc000 - 0xffffff95478ff000\n  . GEN3  : 0xffffff95478ff000 - 0xffffff9a13c32000\n  . DATA  : 0xffffff9a13c32000 - 0xffffffa0795cc000\n  Metadata: 0xffffffcb92096000 - 0xffffffcbb2096000\n  Bitmaps : 0xffffffcbb2096000 - 0xffffffcbbe096000\n\n\n\n"}

And it only happens with RX6600, with RX6650XT it always goes well... does anyone understand that Panic?

 

 

 

Definitely related to AmdRadeonController. Maybe one of these methods help: https://github.com/5T33Z0/OC-Little-Translated/tree/main/01_Adding_missing_Devices_and_enabling_Features/AMD_Radeon_Tweaks

 

 

[Stefanalmare]

1 hour ago, Cyberdevs said:

What is the brand for your GPU? Some GPUs are problematic as you might already know but since it's working in Monterey maybe it's just a misconfiguration in the config.plist or something that you over looked somehow?

It is MSI. I tried to flash Saphire but no light. Suggestions?

Edited June 18, 2022 by Stefanalmare

[PoMpIs]

@D3v1L  Many thanks but not work for me,  same resul with XMP1-XMP2 or Manual  ... 

 

@5T33Z0  I'm going to look, see if I solve this mystery, thank you very much 🙇‍♂️

[Slice]

2 hours ago, chris1111 said:

Old Clover works for macOS Ventura 13  

OpenRuntime-11? Or Aptiofix?

[chris1111]

Just now, Slice said:

OpenRuntime-11? Or Aptiofix?

OpenRuntime build by Clover  5137 (master, commit cc561f87d)

[jackgugo1966]

On 6/17/2022 at 6:10 PM, eSaF said:

Hi - If I may offer some perspective. Are you talking about being able to keep correct Time using @MaLd0n Z390 EFI? if that is your query, you need to alter this setting in the config.plist Kernel/DisableRtcChecksum just like the attached, our Z390 doesn't need this Setting as it causes the BIOS Clock to glitch out. There is a possibility you'll need to reset your BIOS as having this setting Disabled  tends to glitch out the Time on GA-Z390 Motherboards and most noticeable when dual-booting OS X and Windows.

 

The easiest way to tell if the BIOS Clock is functioning as should, boot into the BIOS and look at the Seconds in Time it should be counting up and not static. To get this started again, you'll need to turn the machine off completely, remove the power cable then press the on Button for approx: 30 Seconds or short-out the CMOS Jumper, or remove the Battery for the same length of time.

On replacing the Battery and power Cable, switch the machine on, you'll be greeted with a BIOS Reset message you'll need to setup the BIOS again to run OS X. On doing so the machine will reboot a few times with the reset and the BIOS Clock Seconds will be counting up as it should be which will solve the Time problem. Sorry this is a bit of long winded method but it works. Good luck.

 

PS - I have the same board as @miliuco if you want to try my EFI Folder, it is attached also.

  Reveal hidden contents

EFI.zip 85.75 MB · 24 downloads

thanks eSaF for sharing your efi , itworks since the first boot . regarding the olarila s efi it works but always corrupt my bios cause the time stops working  once maldon told they re for easy boot and need to modify for each configuration.my board is a z390 aorus elite , same as miluco if i m not wrong but loos yours is a pro wifi also my cpu is i5 9600k with shappire rx 560 4g , at the first boot i realized that i lost wifi ( usb dongle working with chris 111 kexts ) it took a while since i get it work cause there s a driver in your efi to enable sip and i use occonfigurator to disable finally i got it . i find a bit hard to apply patchs and edit my config plist properly cause i don t have the skills to do it i just can fix littles things to get my hack working  also i did not find any mapped  usb kext but all my ports work . ventura works good very quick boot but only sleep when i do it manually or short press of on button not it self maybe it s my hack or a bug  not fixed yet . aniway thanks so much

[The Tech]

17 hours ago, jsl2000 said:

My DP/HDMI audio was enabled if SkylakeInjector.kext was disabled.

Please check my previous post at page 34.

Same here. But if disabling the kext, you loose the video playback.

[jsl2000]

Just now, The Tech said:

Same here. But if disabling the kext, you loose the video playback.

In that case it usually means your config.plist does not provide correct DeviceProperty for HD 530.

[The Tech]

9 minutes ago, jsl2000 said:

In that case it usually means your config.plist does not provide correct DeviceProperty for HD 530.

As per PMHeart, the injector kext is required to have Video Playback on YT, etc. This isn't the case for you?

[jsl2000]

2 hours ago, The Tech said:

As per PMHeart, the injector kext is required to have Video Playback on YT, etc. This isn't the case for you?

No, only SkylakeInjector.kext was disabled I can enable DP/HDMI audio from HD 530 and video play is fine on Youtube without this kext.

[surenmunoo]

15 hours ago, MaLd0n said:

Don't use it. This file is from my mobo.

U need edit ur. Is personal thing not generic.  

Hi, Attached is a DSDT I extracted using MaciASL. Can you help.

Suren DSDT.dsl

[The Tech]

2 hours ago, jsl2000 said:

No, only SkylakeInjector.kext was disabled I can enable DP/HDMI audio from HD 530 and video play is fine on Youtube without this kext.

Amazing. Everything works, except for the YT playback. Can you post your EFI?

[miliuco]

@JACKGUGO @The Tech

Please add the signature to your profile with the specs of your machine. 
 

@JACKGUGO

Do you have a specific USB ports map kext for your motherboard? Yes, mine is the same. Or are you using the one provided within @eSaF EFI?

[aben]

5 hours ago, The Tech said:

As per PMHeart, the injector kext is required to have Video Playback on YT, etc.

At the moment - the kext ONLY serves to fix YT playback on Safari* by patching KBL kext to drop VP9 hw decode (Skylake iGPUs don't support VP9). You can still get YT playback on Chrome/Edge, Firefox etc without the kext.

[jackgugo1966]

1 hour ago, miliuco said:

@JACKGUGO @The Tech

Please add the signature to your profile with the specs of your machine. 
 

@JACKGUGO

Do you have a specific USB ports map kext for your motherboard? Yes, mine is the same. Or are you using the one provided within @eSaF EFI?

 Hi Miluco , I m using esaf efi and the usb ports works well but his board is different . i tried to add the specs of my machine on my profile but i don find where i have to edit it.  you share an efi to me a long time ago (monterrey) and i ve got a lot of troubles with sleep cause i was using a fenvi adapter ( not  t919) for an original mac wifi card and works good but even the the usb map was correct my hack doesn t sleep properly and my magic mouse disconnect and connect frecuently and the pointer was erratic aswell . finally i pulled out and i bought a wifi dongle witch works good but i don t have bluetooth . maybe when you got your ventura working in full iwould like to try your efi because our boards are similar . 

[silencer51]

My trusty Thinkpad T480 (Kaby Lake-R) has been running Big Sur & Monterey flawlessly for the past couple of years (running 12.5 beta 3 right now).

 

However, I can't seem to be able to boot MacOS Installer for Ventura yet. With AvoidRunTimeDefrag off, Monterey & Ventura just freeze around the point where kexts such as Lilu and its plugins are loaded (latest builds).

 

With AvoidRuntimeDefrag on, Monterey boots normally, and the Ventura installer passes kext loading until it errors out a few seconds later and reboots.

 

The strange thing is, I tried just for kicks an EFI folder that supposedly runs Ventura on a T480 and it too just freezes during kext loading.

 

Is there something I'm perhaps missing? What should one do if one's system can't boot MacOS without AvoidRuntimeDefrag on?

[D3v1L]

Anyone on rx6600xt in Monterey or Ventura, with injected aty,henbury framebuffer instead of natively load aty,radeonframebuffer with lower geekbench score? ...mean...55000vs91000 Not 50000vs52000 ... 

 

Woah 1000th lol cool

Edited June 19, 2022 by D3v1L

[Stefanalmare]

19 hours ago, FirstTimeCustomac said:

I do have RX 580 that just works. Initially, it was showing all purple line on top and displayport did not work(Only HDMI worked) before reaching the desktop but after adding -lilubetaall all worked out except Orinoco FB being injected.

 

Thank you for confirming that

 

This is what I have

 

I've tried

- SSDT method,

- Changing part# in vBIOS to Mac Edition's part# which worked in previous macOS versions.

- @name, string (DeviceProperty)

- fb_name, string (DeviceProperty)

 

None of these seem to inject Orinoco FrameBuffer.  Any suggestions?

I tried on a Z390 Aorus Master, i9 9900k, RX 580 8gb. You're right. No way to inject Orinoco FB. I suppose it is because of the Beta (also 570 issue). Let's see on the next beta's

[miliuco]

6 minutes ago, D3v1L said:

Anyone on rx6600xt in Monterey or Ventura, with injected aty,henbury framebuffer instead of natively load aty,radeonframebuffer with lower geekbench score?...

I guess it happens to most of us. Henbury with lower GeekBench or Radeon with higher GeekBench. But outside GeekBench, I don't see differences in the 6600 performance.

[miliuco]

4 hours ago, eSaF said:

My USB ports are controlled by this entry in the config.plist and this SSDT in the ACPI folder devised for me by @texem ...

Do you have also any USB port mapping kexts? Or only this SSDT and the code in config.plist? How did you do the SSDT? I suppose it's specific for your mobo right?

[greythorne]

On 6/12/2022 at 9:06 PM, PG7 said:

Asus Vivo AiO V241IC-R 

Ventura 13 Dev Beta

Intel i3-6006u
intel HD520
OC 0.8.2
SSD 
8 Go Memory DDR4

IG-Platform-ID + ID = KabyLake

Wake/Sleep OK
processeur = OK


 

  Reveal hidden contents

 

care to share how you managed to install Ventura? Mine is a Skylake NUC.

[greythorne]

On 6/19/2022 at 4:51 PM, aben said:

At the moment - the kext ONLY serves to fix YT playback on Safari* by patching KBL kext to drop VP9 hw decode (Skylake iGPUs don't support VP9). You can still get YT playback on Chrome/Edge, Firefox etc without the kext.

Would you be able to share the details how you installed on a Skylake machine? What quirks to turn on or off, what kexts to include etc.

 

I am on Monterey 12.4 on my trusty Skylake Intel NUC.

 

hello @aben

 

followed your instructions. Used the latest OC 0.8.2 and the latest kexts. The WEG kext used is the one you attached. I wanted to test out OC 0.8.2 on my Monterey first and ensure that I am able to boot and use the system. 
 

however, after preparing and booting, at the Apple logo the progress bar went all the way then  restarts by itself. 
 

no idea what’s going. I have attached my config.plist which is based on OC 0.8.2. I did not changed anything even the iGPU is still based on SKL. 
 

please have a look. Thanks. 
 

 

 

Edited June 23, 2022 by greythorne
Attach EFI