pieropontra Posted January 28, 2020 Share Posted January 28, 2020 (edited) Hi guys, first time posting here! Today I decided to play a bit with OpenCore, I started to study the vanilla guide, taken confidence with base functioning, created my first EFI from scratch. I followed the guide but I was unable to understand well the SSDTs part, I used my former Clover SSDTs in conjunction with OC ones. In the end, OC loaded and founded Win10 and Catalina partitions, Win booted but Catalina not. My system: Asus Prime X299-A Intel Core i9 Extreme 9980XE Radeon VII in Slot1 Broadcom WiFi/BT card in Slot5 Anyone here have a ready EFI for a lookalike system for me to start with and maybe be able to switch from Clover? Thanks in advance to all of you. Edited January 28, 2020 by pieropontra Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706161 Share on other sites More sharing options...
anibalin Posted January 28, 2020 Share Posted January 28, 2020 Hey guys, does anyone have issues with LAN dropping randomly but consistently? Even I have to unplug and replug the ethernet cable. Using latest OC, 10.15.3, RTL8111. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706192 Share on other sites More sharing options...
mhkmichaell Posted January 29, 2020 Share Posted January 29, 2020 On 10/14/2019 at 6:15 PM, obus said: Hi all. Struggling to get my HP-840 G1 (Core i5 HD 4400) to work with OpenCore 0.5.1. Anybody with experience from this laptop? Stuck at boot menu. It seems that Oc can't find my boot partition. Everything works fine with clover. Any help appreciated. opencore-2019-10-14-154709.txt config.plist Same problem with my probook 6470b. Do you resolve the problem? OC USB works fine when I plug to the PC. Install, recovery, everything is ok. But on my HP is like on your picture. When USB starts auto I’ve got only black screen. I must choose Boot from Efi and than boot from Boot.efi and only then I can see oc bootmenu but there is No Instalation image. Can someone help with this? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706256 Share on other sites More sharing options...
telepati Posted January 29, 2020 Share Posted January 29, 2020 (edited) After clean NVRAM SIP always enable and Xcode never make auto saved it says config locked which isnt. I checked my config csr didnt change still the same E7030000 but it never affects after the restart SIP always shows enable. is cleaning NVRAM broke my config and I need a new config or this can be fixed without new config? I also tried these three values but now of them affect anything only way to close SIP in recovery mode with terminal command csrutil disable. Why these values are not working? 00000000 - SIP completely enabled 30000000 - Allow unsigned kexts and writing to protected fs locations E7030000 - SIP completely disabled Edited January 29, 2020 by telepati Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706260 Share on other sites More sharing options...
hardcorehenry Posted January 29, 2020 Share Posted January 29, 2020 1 hour ago, telepati said: After clean NVRAM SIP always enable and Xcode never make auto saved it says config locked which isnt. I checked my config csr didnt change still the same E7030000 but it never affects after the restart SIP always shows enable. is cleaning NVRAM broke my config and I need a new config or this can be fixed without new config? I also tried these three values but now of them affect anything only way to close SIP in recovery mode with terminal command csrutil disable. Why these values are not working? 00000000 - SIP completely enabled 30000000 - Allow unsigned kexts and writing to protected fs locations E7030000 - SIP completely disabled 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706273 Share on other sites More sharing options...
NoEnd Posted January 30, 2020 Share Posted January 30, 2020 Hi, I'm having issues with restarts and shutdowns, apparently It fails to complete the process and had to force restart into safe bios. I have follwed the guide on https://khronokernel.github.io/Opencore-Vanilla-Desktop-Guide/troubleshooting/troubleshooting.html#macos-post-install >> (BIOS reset or sent into Safemode after reboot/shutdown) however I'm getting this on boot: I have below files in ACPI: SSDT-AWAC SSDT-PLUG SSDT-PMC DSDT and IOREG Attached. Thanks DSDT.aml Ioreg.txt Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706412 Share on other sites More sharing options...
Sniki Posted January 30, 2020 Share Posted January 30, 2020 (edited) In case you added a kext or ACPI table and it's causing the system trouble and not being able to boot anymore: is there a way to edit the config.plist file of OpenCore in boot picker/or using a OC tool so you can drop that specific ACPI table or not inject that specific kext that is causing trouble ? For now i always make a USB flash drive with current working EFI so in case i mess, i boot from the USB as a last known good working bootloader configuration. Edited January 30, 2020 by Sniki Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706414 Share on other sites More sharing options...
GauravC96 Posted January 30, 2020 Share Posted January 30, 2020 Hi Hackintoshers, I'm trying to get an OpenCore Catalina 10.15.2 Hack working, I've read through the Opencore manual and read the vanilla guide for Haswell. Ive hit a roadblock. I can choose to boot the MacOS Catalina install. However, I get stuck on the boot screen (Just an apple logo with back wallpaper). Ive attached my log, config plist and EFI folder . Can someone let me know whats wrong? My hardware is i7 4790k Vega 56 24gb ddr3 Ram 1TB SSD sata ASRock Z87M Extreme4 Following in Drivers ApfsDriverLoader, AppleUsbKbDxe, FwRuntimeServices, HFSPlus, NvmExpress, DxeXhciDxe Following in Kext AppleALC.kext, Lilu.kext, USBInjectAll.kext, VirtualSMC.kext, WhateverGreen.kext Following in ACPI DSDT.aml SSDT-EC.aml SSDT-EC.dsl used SSDT time to generate these This is what I get with Verbose EFI.zip opencore-2020-01-30-182530.txt config.plist Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706426 Share on other sites More sharing options...
nmano Posted January 30, 2020 Share Posted January 30, 2020 Thanks for new update OpenCore-0.5.5-RELEASE CleanNvram.efi CleanNvram.efi limited use or regular use? 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706436 Share on other sites More sharing options...
syn909 Posted January 31, 2020 Share Posted January 31, 2020 (edited) *EDIT* Problem solved thanks to @nmano DeviceProperties Patches! I am experiencing something that I do not quite understand, perhaps its an OpenCore bug? After waking from Sleep I get the following error in Vmware fusion After waking from sleep: "This host supports intel VT-x, but intel vt-x is disabled" and refuses to run virtual machines. This error will persist until I fully shutdown the machine and turn off power to the PSU and reboot error will be gone in Vmware. Just for reference I have to have AppleXcpmCfgLock enabled in Kerner Quirks or my machine will not wake from sleep. *EDIT* Edited January 31, 2020 by syn909 update, problem resolved Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706489 Share on other sites More sharing options...
mhaeuser Posted January 31, 2020 Share Posted January 31, 2020 OC is not and cannot be involved with S3 wake Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706490 Share on other sites More sharing options...
Matgen84 Posted January 31, 2020 Share Posted January 31, 2020 Hi All I've got Kernel Panic Cannot perform kext summary with kexts for TP-Link Archer T9UH v2 in Kexts/Folder (Opencore 0.5.4). If I remove this kext, macOS can boot Do you know why there is a problem of injection, please. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706512 Share on other sites More sharing options...
nmano Posted January 31, 2020 Share Posted January 31, 2020 (edited) Add System peripheral Detail for X99 and X299 System X99.zip X299.zip Edited January 31, 2020 by nmano 1 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706513 Share on other sites More sharing options...
nmano Posted January 31, 2020 Share Posted January 31, 2020 11 minutes ago, Matgen84 said: Hi All I've got Kernel Panic Cannot perform kext summary with kexts for TP-Link Archer T9UH v2 in Kexts/Folder (Opencore 0.5.4). If I remove this kext, macOS can boot Do you know why there is a problem of injection, please. Hi Friend If you remove kext I thing remove your wireless Adapter too. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706514 Share on other sites More sharing options...
Matgen84 Posted January 31, 2020 Share Posted January 31, 2020 26 minutes ago, nmano said: Hi Friend If you remove kext I thing remove your wireless Adapter too. Hi @nmano I can boot without kexts and wireless adapter connected. In Clover EFI Folder, all works fine. The question: Opencore can do the same for these RtWlan kexts (non Lilu plugins). 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706515 Share on other sites More sharing options...
NoEnd Posted January 31, 2020 Share Posted January 31, 2020 19 hours ago, NoEnd said: Hi, I'm having issues with restarts and shutdowns, apparently It fails to complete the process and had to force restart into safe bios. I have follwed the guide on https://khronokernel.github.io/Opencore-Vanilla-Desktop-Guide/troubleshooting/troubleshooting.html#macos-post-install >> (BIOS reset or sent into Safemode after reboot/shutdown) however I'm getting this on boot: I have below files in ACPI: SSDT-AWAC SSDT-PLUG SSDT-PMC DSDT and IOREG Attached. Thanks DSDT.aml Ioreg.txt Would appreciate some help, this is the 1 thing holding me from OC. For now I'm back to clover. Thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706519 Share on other sites More sharing options...
telepati Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, NoEnd said: Would appreciate some help, this is the 1 thing holding me from OC. For now I'm back to clover. Thanks Check this post it can help you. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706532 Share on other sites More sharing options...
dani77zg Posted January 31, 2020 Share Posted January 31, 2020 (edited) Hi all! Has anyone encontered a problem where he/she cannot boot into Recovery partition? I am using latest version of opencore on an AMD Ryzen build. Everything else is working perfectly with no issues whatsoever. I have OSX Ctatalina 10.5.3 installed on an SSD with Recovery partition created by the installer on the same drive. 10.5.3 was an upgrade over originaly installed 10.5.2. I couldn't boot to recovery prior nor after the 10.5.3 update and update itself went without a hitch also upgarding Recovery partition to 10.5.3. I am using iMacPro 1,1 profile. Since I saw on the AMD OSX discord channel that there are quite a few people having the same issue but not getting any answers I thought in asking here. Appreciate any help I can get. The message I get is: Error allocating 0x7b40 pages at 0x000000005859000 alloc type 2 Couldn't allocate runtime area. Hardware configuration is (if it matters): Asrock B450M Ryzen 3500X Radeon RX580 RAM 16GB 2600 MHz Samsung Evo 850 Edited January 31, 2020 by dani77zg Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706533 Share on other sites More sharing options...
Slice Posted January 31, 2020 Share Posted January 31, 2020 10 minutes ago, telepati said: Use memoryallocation.kext. Google it. Sorry but google keep silence. There are many keywords like memory, allocation and kext on different sites. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706549 Share on other sites More sharing options...
Matgen84 Posted January 31, 2020 Share Posted January 31, 2020 (edited) 2 hours ago, dani77zg said: Hi all! Has anyone encontered a problem where he/she cannot boot into Recovery partition? I am using latest version of opencore on an AMD Ryzen build. Everything else is working perfectly with no issues whatsoever. I have OSX Ctatalina 10.5.3 installed on an SSD with Recovery partition created by the installer on the same drive. 10.5.3 was an upgrade over originaly installed 10.5.2. I couldn't boot to recovery prior nor after the 10.5.3 update and update itself went without a hitch also upgarding Recovery partition to 10.5.3. I am using iMacPro 1,1 profile. Since I saw on the AMD OSX discord channel that there are quite a few people having the same issue but not getting any answers I thought in asking here. Appreciate any help I can get. The message I get is: Error allocating 0x7b40 pages at 0x000000005859000 alloc type 2 Couldn't allocate runtime area. Hardware configuration is (if it matters): Asrock B450M Ryzen 3500X Radeon RX580 RAM 16GB 2600 MHz Samsung Evo 850 Try what @telepati says. Insure you're using hfsplus.efi installed instead of vbox Memoryallocation--> Here 17 minutes ago, telepati said: Use memoryallocation.kext. Google it. Hi @telepati I's memoryallocation.efi instead of kext. 5 minutes ago, Slice said: Sorry but google keep silence. There are many keywords like memory, allocation and kext on different sites. Take a look to the link in my post @Slice Edited January 31, 2020 by Matgen84 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706551 Share on other sites More sharing options...
syn909 Posted January 31, 2020 Share Posted January 31, 2020 (edited) 7 hours ago, nmano said: Add System peripheral Detail for X99 and X299 System X299.zip THANK YOU @nmano! This fixed my issue, Vmware not giving me any problems after resuming from sleep! Are you able to boot from the recovery partition? I have HfsPlus.efi but I just get a black screen and it reboots back to the OC picker. Edited January 31, 2020 by syn909 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706557 Share on other sites More sharing options...
mhaeuser Posted January 31, 2020 Share Posted January 31, 2020 @Slice @Matgen84 @telepati @dani77zg MemoryAllocation.efi is just renamed free2000, please don't recommend this junk. For memory allocation errors, upgrade the firmware, follow the recommended firmware settings (e.g. Above 4G decoding), use DevirtualiseMmio and ProvideCustomSlide. 1 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706570 Share on other sites More sharing options...
telepati Posted January 31, 2020 Share Posted January 31, 2020 (edited) 2 minutes ago, Download-Fritz said: @Slice @Matgen84 @telepati @dani77zg MemoryAllocation.efi is just renamed free2000, please don't recommend this junk. For memory allocation errors, upgrade the firmware, follow the recommended firmware settings (e.g. Above 4G decoding), use DevirtualiseMmio and ProvideCustomSlide. Thanks to warning Post deleted. Edited January 31, 2020 by telepati 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706571 Share on other sites More sharing options...
NoEnd Posted January 31, 2020 Share Posted January 31, 2020 7 hours ago, telepati said: Check this post it can help you. Thanks for the advice, however it didn't work. I tried the kernel patch before and now tested the kext (while disabling the patch) however no luck. I can boot successfully however Sleep/restart/shutdown will only fail into safe bios. Thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706584 Share on other sites More sharing options...
dani77zg Posted February 1, 2020 Share Posted February 1, 2020 15 hours ago, Download-Fritz said: @Slice @Matgen84 @telepati @dani77zg MemoryAllocation.efi is just renamed free2000, please don't recommend this junk. For memory allocation errors, upgrade the firmware, follow the recommended firmware settings (e.g. Above 4G decoding), use DevirtualiseMmio and ProvideCustomSlide. Hi! I am using Above 4G decoding. I am using HFSPlus.efi. MemoryAllocation.efi did nothing as did ProvideCustomSlide. DevirtualiseMmio prevents system from booting and I had to shange back. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/121/#findComment-2706615 Share on other sites More sharing options...
Recommended Posts