miliuco Posted June 19, 2021 Share Posted June 19, 2021 21 minutes ago, jsl2000 said: My advice is RX560, RX570 or RX580 perform much better and can be used until Mac OS 13 coming... But now they are too expensive. Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761213 Share on other sites More sharing options...
ombra88 Posted June 19, 2021 Share Posted June 19, 2021 1 hour ago, jsl2000 said: According to my experience and testing with other GPUs GT710/GT730 performs around IGPU HD4000. IGPU HD4600 is better than these 2. My advice is RX560, RX570 or RX580 perform much better and can be used until Mac OS 13 coming. Without Nvidia web driver GTX1060 can not get hardware acceleration at 10.14.x or higher ! I switched to iMacPro1,1 and iMac19,1 and it doesn't boot from r9 290x but only from iGPU 🙄. Any idea? Under system report both GPUs are perfectly recognized though Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761221 Share on other sites More sharing options...
jsl2000 Posted June 19, 2021 Share Posted June 19, 2021 3 minutes ago, ombra88 said: I switched to iMacPro1,1 and iMac19,1 and it doesn't boot from r9 290x but only from iGPU 🙄. Any idea? Under system report both GPUs are perfectly recognized though Can you show your hardware signature ? LGA 775 Hackintoshs have no IGPU. For those higher than Z77 (Ivy Bridge) with IGPU can select boot order of IGPU or dGPU in BIOS. 1 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761222 Share on other sites More sharing options...
ombra88 Posted June 19, 2021 Share Posted June 19, 2021 7 minutes ago, jsl2000 said: Can you show your hardware signature ? LGA 775 Hackintoshs have no IGPU. For those higher than Z77 (Ivy Bridge) with IGPU can select boot order of IGPU or dGPU in BIOS. Haswell LGA 1150 and R9 290x -CPU: i7 4770K -MB: Asus Z87-K -GPU: AMD R9 290X Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761224 Share on other sites More sharing options...
jsl2000 Posted June 19, 2021 Share Posted June 19, 2021 (edited) 12 minutes ago, ombra88 said: Haswell LGA 1150 and R9 290x -CPU: i7 4770K -MB: Asus Z87-K -GPU: AMD R9 290X For your hardware its default is IGPU HD4600. You can try to change it in BIOS>Advanced>SystemAgent(SA)Configuration>Graphics>PCIe instead of IGPU (default) and maybe should add agdpmod=pikera to prevent blank screen during booting. Edited June 19, 2021 by jsl2000 1 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761226 Share on other sites More sharing options...
ombra88 Posted June 19, 2021 Share Posted June 19, 2021 20 minutes ago, jsl2000 said: For your hardware its default is IGPU HD4600. You can try to change it in BIOS>Advanced>SystemAgent(SA)Configuration>Graphics>PCIe instead of IGPU (default) and maybe should add agdpmod=pikera to prevent blank screen during booting. I see, tried with it but nothing still stuck with apple logo and scattered lines when booting. It's crazy to leave dGPUs doing nothing for this new os..😤 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761230 Share on other sites More sharing options...
asdesoso Posted June 19, 2021 Share Posted June 19, 2021 Finally my desktop build, an Intel 4th generation Haswell, now all is working fine. Cheers. 😊 1 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761245 Share on other sites More sharing options...
D-an-W Posted June 19, 2021 Share Posted June 19, 2021 Hi folks, got a spare partition with Big Sur currently installed. Is Monterey now possible on my ancient hardware (In Sig)? Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761246 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 19, 2021 Share Posted June 19, 2021 19 minutes ago, D-an-W said: Hi folks, got a spare partition with Big Sur currently installed. Is Monterey now possible on my ancient hardware (In Sig)? Read the thread. There are guides on how to get IvyBridge working. It's complicated but not impossible. But if you ask me, it's not worth it. Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761249 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 19, 2021 Share Posted June 19, 2021 On 6/16/2021 at 11:49 PM, MacWill said: Thanks for the screenshot. What does "ID do DIspositvo" mean in english. I don't have that in my list. Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761252 Share on other sites More sharing options...
MacWill Posted June 19, 2021 Share Posted June 19, 2021 3 hours ago, 5T33Z0 said: Thanks for the screenshot. What does "ID do DIspositvo" mean in english. I don't have that in my list. "Device ID" 😊 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761260 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 19, 2021 Share Posted June 19, 2021 (edited) 2 hours ago, MacWill said: "Device ID" 😊 I just realized: you are using a Z590 Vision G which uses a revision 3 of the I225 which is compatible with macOS while the Z490 uses Revision 2. So no wonder that it works for you and not for other Z490 Vision G users… Edited June 19, 2021 by 5T33Z0 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761263 Share on other sites More sharing options...
bisdak4920 Posted June 19, 2021 Share Posted June 19, 2021 6 hours ago, 5T33Z0 said: Read the thread. There are guides on how to get IvyBridge working. It's complicated but not impossible. But if you ask me, it's not worth it. I have a Ivy Bridge with the following specs: ASUS H61M-A/USB, GT630, 4GG Ram, 120 GB M.2 SSD with adapter to connect to sata, 500GB HD. Running Montery dual boot with Windows 11 and it runs pretty will and as fast as my Haswell with out boot delay and autologin off. Windows 11 on a normal HD performs very well. If you have a graphics card supported OOB the installation is smooth as silk. Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761270 Share on other sites More sharing options...
hiphopboy Posted June 20, 2021 Share Posted June 20, 2021 (edited) 1 hour ago, Hervé said: The matter really related to IvyBridge HD4000 graphics. Add the Geforce 730 GT then done, dont worry about the internal graphic Hope soon release the second beta :)) Edited June 20, 2021 by hiphopboy Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761276 Share on other sites More sharing options...
jsl2000 Posted June 20, 2021 Share Posted June 20, 2021 (edited) 13 hours ago, ombra88 said: I see, tried with it but nothing still stuck with apple logo and scattered lines when booting. It's crazy to leave dGPUs doing nothing for this new os..😤 If Whatevergreen.kext was used, you may try add "-wegnoigpu" to boot-argument to disable IGPU and booted by dGPU (in your case which's R9 290X). Edited June 20, 2021 by jsl2000 1 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761278 Share on other sites More sharing options...
yapan4 Posted June 20, 2021 Share Posted June 20, 2021 Hi, @iCanaro Where can download HackCheck please? Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761281 Share on other sites More sharing options...
iCanaro Posted June 20, 2021 Share Posted June 20, 2021 37 minutes ago, yapan4 said: Hi, @iCanaro Where can download HackCheck please? here https://www.macos86.it/files/file/95-hack-check/ to download you need to introduce yourself and write a post, so a total of 2 posts https://www.macos86.it/forum/19-introduce-yourself/ 3 2 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761283 Share on other sites More sharing options...
D-an-W Posted June 20, 2021 Share Posted June 20, 2021 (edited) On 6/19/2021 at 4:20 PM, 5T33Z0 said: Read the thread. There are guides on how to get IvyBridge working. It's complicated but not impossible. But if you ask me, it's not worth it. I updated my OpenCore USB Stick to 0.7.1 and it boots fine, just need to check if all the hardware is working correctly now. Edited June 20, 2021 by D-an-W Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761306 Share on other sites More sharing options...
pepitillo Posted June 20, 2021 Share Posted June 20, 2021 Hello, I was trying to install Monterey on my rig. It's on my signature. For that, I've had to turn off multi core processing. I think is something related to CpuTscSync. Do yo guys have also this problem? Currently I'm installing with this option off. Maybe the plugin needs an update. Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761308 Share on other sites More sharing options...
pepitillo Posted June 20, 2021 Share Posted June 20, 2021 Yes, little strange, but in fact my system is buggy without this kext (artifacts on the screen or semi-transparent apple logo at boot). You can take a look at this old post from my system : There's an issue for CpuTscSync on acidanthera bug tracker : https://github.com/acidanthera/bugtracker/issues/1676 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761321 Share on other sites More sharing options...
jsl2000 Posted June 21, 2021 Share Posted June 21, 2021 (edited) 16 hours ago, pepitillo said: Hello, I was trying to install Monterey on my rig. It's on my signature. For that, I've had to turn off multi core processing. I think is something related to CpuTscSync. Do yo guys have also this problem? Currently I'm installing with this option off. Maybe the plugin needs an update. Me too. In Acer M4610 hackintosh I must add cpus=1 to boot properly even I have used VoodooTSCSync.kext, CpuTscSync.kext, and TSCAdjustReset.kext which is the only one among my 10+ hackintoshs had this issue. Edited June 21, 2021 by jsl2000 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761342 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 21, 2021 Share Posted June 21, 2021 I just stumbled across this HD4000 Patcher for Monterey by @chris1111: https://github.com/chris1111/Patch-HD4000-Monterey Great. I am going to try this. I am wondering: could I just install macOS Monterey on a System which is supprted, patch the HD4000 support into it, put the EFI for my Ivy Bridge Laptop in, put the disk in the laptop and boot? Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761346 Share on other sites More sharing options...
surenmunoo Posted June 21, 2021 Share Posted June 21, 2021 Anyone have sudden reboots with Monterey. I installed and it worked for a while but recently it just freezes the screen and reboots itself after being frozen for about 2 minutes. 2 Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761349 Share on other sites More sharing options...
SavageAUS Posted June 21, 2021 Share Posted June 21, 2021 Anyone have sudden reboots with Monterey. I installed and it worked for a while but recently it just freezes the screen and reboots itself after being frozen for about 2 minutes. What’s changed recently? New kext? New program?Sent from my iPhone using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761351 Share on other sites More sharing options...
surenmunoo Posted June 21, 2021 Share Posted June 21, 2021 2 minutes ago, SavageAUS said: What’s changed recently? New kext? New program? Sent from my iPhone using Tapatalk Added an AMD AX7870 Graphics card only and changed symbols to iMacPro1.1 to work with that card Link to comment https://www.insanelymac.com/forum/topic/348725-pre-release-macos-monterey/page/19/#findComment-2761352 Share on other sites More sharing options...
Recommended Posts