[pre-release] macOS Big Sur

[pico joe]

1. the main problem if Snapshots Sealed: Broken so there is no OTA Update

 

 Volume disk5s5 9796CEE4-6435-4893-8EC4-9D114EF9984F
        ---------------------------------------------------
        APFS Volume Disk (Role):   disk5s5 (System)
        Name:                      BigSur (Case-insensitive)
        Mount Point:               /private/tmp/msu-target-LahGPIpX
        Capacity Consumed:         15002284032 B (15.0 GB)
        Sealed:                    Broken
        FileVault:                 No
        |
        Snapshot:                  57F4DA5D-08D6-4762-BE29-28A7FA4078C5
        Snapshot Disk:             disk5s5s1
        Snapshot Mount Point:      /
        Snapshot Sealed:           Yes

 

with this configuration you can get OTA Update

 

Snapshot Sealed Broken cause we tocuh /S/L/E or /L/E

 

2. AFAIK Clover not yet implemented secureboot (cmiiw)

Edited October 14, 2020 by pico joe

[Ludox]

upgrade ok

[JorgeMax]

2 hours ago, markpenn said:

finished. the beta 10 update, with (secureboot set to disable )

 

now can't boot into os, OCB: StartImage failed - Aborted.

(securboot set to default now.) open core beta from today.

 

please help! 

 

 

I was having this error. I just cleaned the NVRAM and I didn't have that anymore

[pico joe]

Hi @fusion71au I set value 67000000  in nvram but get different result with yours

 

pico@picos-iMac ~ % nvram csr-active-config
csr-active-config    %e7%03%00%00
pico@picos-iMac ~ % csrutil status
System Integrity Protection status: unknown (Custom Configuration).

Configuration:
    Apple Internal: disabled
    Kext Signing: disabled
    Filesystem Protections: disabled
    Debugging Restrictions: disabled
    DTrace Restrictions: disabled
    NVRAM Protections: disabled
    BaseSystem Verification: disabled

This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.

 

 

[Matgen84]

11 hours ago, eSaF said:

Is anyone getting such a large D/Load?

  Hide contents

 

Idem here on my Z390 Aorus Master 

[fusion71au]

@pico joe,

 

With OC, you need to Reset NVRAM through the OC picker before the csr-active-config value set in your config.plist takes hold...

Spoiler

 

Another option to change the nvram csr-active-config value is to boot to macOS using a Clover USB boot stick with config.plist/RtVariables/CsrActiveConfig=0x67.  Unlike OC, Clover changes the nvram value immediately without needing a NVRAM reset...

 

Spoiler

 

 

 

47 minutes ago, Matgen84 said:

Idem here on my Z390 Aorus Master 

Is your config.plist/Misc/Security/SecureBootModel set to disabled?  What is your SIP/csr-active-config setting?  Are you booting off the original sealed APFS snapshot?

 

20 minutes ago, Matgen84 said:

I use Clover with csr-active-config = 0x67. The original sealed APFS snapshot exists.

Try the delta OTA update again using OC 0.6.2.  @ludox reported the same problem with Clover r5124, solved after changing back to OC.

Edited October 15, 2020 by fusion71au

[pico joe]

Oh Okay .. it’s just clarify as I remember I enabled SIP in recovery csrutil enable and with 670000 in nvram, but after OTA update Beta 10 the value change automatically if I check via terminal

 

btw thanks

Oh Okay .. it’s just clarify as I remember I enabled SIP in recovery csrutil enable and with 670000 in nvram, but after OTA update Beta 10 the value change automatically if I check via terminal

 

btw thanks

[Matgen84]

57 minutes ago, fusion71au said:

 

Is your config.plist/Misc/Security/SecureBootModel set to disabled?  What is your SIP/csr-active-config setting?   Are you booting off the original sealed APFS snapshot?

I use Clover with csr-active-config = 0x67. The original sealed APFS snapshot exists.

EDIT: csr-active-config=0x0 (enable) via Clover GUI, same issue: software updater show Full macOS instead of Update. Now I try with OC.

Edited October 15, 2020 by Matgen84

[WizeMan]

I am on beta 9 20A5384c but I don't see the new update on the preferences pane.

 

I already have SecureBootModel set to Disabled and SIP is disabled.

 

 

[SavageAUS]

Updated Beta 10 on AMD with OC.

 

Spoiler

 

 

Intel Laptop downloading update now.

[Ludox]

Solution since had the same problem to upgrade from 9 to 10
Since clover was unable to download the 4gb 10 and returned me to 12gb here's what I did:

1-I temporarily booted with Opencore 6.2 with all upgrading kexts on a USB stick
2- 4gb detection in normal download
3-After the first reboot, restart with the Clover 5124 until the update installation is complete.
4- Starting with normal Clover 5124 BG beta 10, all perfectly working.

 

 

[kushwavez]

16 minutes ago, ludox said:

1-I temporarily booted with Opencore 6.2 with all upgrading kexts on a USB stick
2- 4gb detection in normal download

On OpenCore I still get that I'm up-to-date, and with DeveloperBetaUtility I got 12 GB update instead of 4.

csr-active-config: 67000000, SecureBootModel=Disabled, Reseted NVRAM

Edited October 15, 2020 by kushwavez

[chris1111]

13 hours ago, eSaF said:

What a journey!!!! - I tried Three times to update to this latest Beta and each time I was offered a full install and each time it would be the same Beta I am already running. The cure to over come this, I changed Security/SecureBootModel from Default to Disabled and only then I was offered the update at 3.82 GB.

  Reveal hidden contents

 

Thats why since Beta 7 I disable S..... boot model 

 

HP ProBook 6570b DONE ⬇︎

Spoiler

 

Edited October 15, 2020 by chris1111
HP ProBook 6570b DONE

[Ludox]

19 minutes ago, kushwavez said:

csr-active-config: 67000000, SecureBootModel=Disabled, Reseted NVRAM

csr-active-config: 67000000(NO)FF0F0000 im use install upgrade BG 10

[kushwavez]

8 minutes ago, ludox said:

csr-active-config: 67000000(NO)FF0F0000 im use install upgrade BG 10

Thanks so I changed to that, reset NVRAM but still no updates and with Utility I've got 12 GB. 

[Ludox]

14 minutes ago, kushwavez said:

Thanks so I changed to that, reset NVRAM but still no updates and with Utility I've got 12 GB.  

use done this config .. remove or insert what you need for your hardware configuration and test .. and let me know opencore 6.2

 

config.plist.zip

14 minutes ago, kushwavez said:

 

[Ludox]

10 minutes ago, corint1 said:

 

I don't believe you ...

You do not believe me?
According to Te do I tell lies?

 

[corint1]

I said I don't believe you, not that you're lying ... and I was referring strictly to the clover ... let's see what we can do and not get annoyed in vain ... you shared an OC config file and no of clover as I think everyone expected ...
 

[kushwavez]

29 minutes ago, ludox said:

use done this config .. remove or insert what you need for your hardware configuration and test .. and let me know opencore 6.2

 

config.plist.zip

Thanks for that, unfortunately exactly the same with your config.plist. No new updates in Software Update, with Utility it's downloading 12 GB. (NVRAM is reseted again). Anyway no problem, I have time.

Interesting: Yesterday I updated my 3 systems from Beta 6 to 9 without any issues/changes with SIP enabled (Clover v5124)

[JorgeMax]

Here's how: 

Spoiler

 

See if "authenticated-root" is active
My config.plist with the key "SecureBootModel = Disable"
SIP: 67000000
OpenCore 0.6.2 shows 3.82GB and the update was made without error
In Clover 5124 the SIP is at 0x67, and it gives me the same status as the SIP in the terminal
But as Clover doesn't have the "SecureBootModel" key it shows me more than 12GB of download

[kushwavez]

2 minutes ago, JorgeMax said:

Here's how: 

  Reveal hidden contents

 

See if "authenticated-root" is active
My config.plist with the key "SecureBootModel = Disable"
SIP: 67000000
OpenCore 0.6.2 shows 3.82GB and the update was made without error
In Clover 5124 the SIP is at 0x67, and it gives me the same status as the SIP in the terminal
But as Clover doesn't have the "SecureBootModel" key it shows me more than 12GB of download

on Clover to disable auth-root boot with CsrActiveConfig=0xFFF

[OrpheusInHell]

Fingers crossed...

[OrpheusInHell]

Well, that was flawless !!!

 

[Ludox]

3 hours ago, ludox said:

Solution since had the same problem to upgrade from 9 to 10
Since clover was unable to download the 4gb 10 and returned me to 12gb here's what I did:

1-I temporarily booted with Opencore 6.2 with all upgrading kexts on a USB stick
2- 4gb detection in normal download
3-After the first reboot, restart with the Clover 5124 until the update installation is complete.
4- Starting with normal Clover 5124 BG beta 10, all perfectly working.

 

 

Here is the proof of the final result of my above procedure

 

[Sherlocks]

i think beta10 performance is not good.
also in safari, youtube playback is error.

Sent from my SM-N960N using Tapatalk