Jump to content
1771 posts in this topic

Recommended Posts

Hi, would it be hard to switch from the Aorus Z390 Master to a "lower" version of the MB?
I still have the Bios issues, and I don't know if it is the Motherboard or the CPU. I asked Gigabyte for a replacement but I don't know if I will get one, plus it looks like the z390 master is not available anymore.

As I highly appreciate the work Audiogod is doing I would like to stick with the same hardware, especially as MacOS and Windows is running totally fine with the hardware.

Merhaba.
"OpenCore macOS Catalina 10.15.5 AMD & Intel İmajı"
Claus'un linkteki imajını indirip, USB'ye yazdırdıktan sonra EFI klasörümü sistemime uygun olan ile değiştirdim. BIOS ayarlarımı da yerine getirdim fakat USB'den Boot edip kurulum aşamasına geçemedim. Nerede neyi hatalı yapıyorum?

Desktop'a kurulum yapmaya çalışıyorum.
Intel Core i5-9600K
Intel(r) HD Graphics 630.
Sapphire Pulse RX570 8 GB.
High Definition Audio Controller.
Intel(r) Dual band Wireless- AC 9560.
PCI-e gigabit Ethernet Controller ı217.
DDR4/8GB/ 3200 MT/s

Just now, seha39 said:

Merhaba.
"OpenCore macOS Catalina 10.15.5 AMD & Intel İmajı"
Claus'un linkteki imajını indirip, USB'ye yazdırdıktan sonra EFI klasörümü sistemime uygun olan ile değiştirdim. BIOS ayarlarımı da yerine getirdim fakat USB'den Boot edip kurulum aşamasına geçemedim. Nerede neyi hatalı yapıyorum?

Desktop'a kurulum yapmaya çalışıyorum.
Intel Core i5-9600K
Intel(r) HD Graphics 630.
Sapphire Pulse RX570 8 GB.
High Definition Audio Controller.
Intel(r) Dual band Wireless- AC 9560.
PCI-e gigabit Ethernet Controller ı217.
DDR4/8GB/ 3200 MT/s

Denedim sonuç aynı daha önceleri sorunsuz yükleme yapabiliyordum sonra diskleri silmiştim windowsa geçtim ve BIOS güncellemeden sonra bu sorunla karşılaştım.
Tekrar yukleme ekranina dusuyor.
Kurulum ekranına kadar sistem Boot ediyor fakat diski seçip yüklemeye geldiğim zaman olmuyor diskte sanki bir bloke varmış gibi yükleme yapmıyor.
 

Dosya Ekleri

  • 20210210_175607.jpg
    20210210_175607.jpg
    85,2 KB · Görüntüleme: 4
  • 20210210_175614.jpg
    20210210_175614.jpg
    78,4 KB · Görüntüleme: 4
  • 20210210_175621.jpg
    20210210_175621.jpg
    92,3 KB · Görüntüleme: 4
  • 20210210_175629.jpg
    20210210_175629.jpg
    101,7 KB · Görüntüleme: 4
  • 20210210_175637.jpg
    20210210_175637.jpg
    89,3 KB · Görüntüleme: 4
  • 20210210_175644.jpg
    20210210_175644.jpg
    82,9 KB · Görüntüleme: 4
5 minutes ago, seha39 said:

Merhaba.
Claus'un linkteki imajını indirip, USB'ye yazdırdıktan sonra EFI klasörümü sistemime uygun olan ile değiştirdim. BIOS ayarlarımı da yerine getirdim fakat USB'den Boot edip kurulum aşamasına geçemedim. Nerede neyi hatalı yapıyorum?

  •  

 

Buraya İngilizce yazmanız gerekiyor.

50 minutes ago, Locked Down said:

 

Buraya İngilizce yazmanız gerekiyor.

Hi.
After downloading the image of Claus on the link and burning it to USB, I replaced my EFI folder with the appropriate one for my system. I did my BIOS settings as well, but I could not boot from USB and proceed to the setup phase. Where am I doing wrong?

 

@seha39, don't use somebody else's image, you don't know what it really is. Download macOS from Apple yourself and use that, you then know that has not been interfered with. If you don't have a Mac to download it use gibMacos.

 

How did you create the installer on the USB stick?

 

Is your EFI folder in the EFI partition on your USB stick? It has to be in the correct place. Have you pressed F12 at boot up and booted from the USB stick?

  • Like 2
22 minutes ago, Locked Down said:

@seha39, don't use somebody else's image, you don't know what it really is. Download macOS from Apple yourself and use that, you then know that has not been interfered with. If you don't have a Mac to download it use gibMacos.

 

How did you create the installer on the USB stick?

 

Is your EFI folder in the EFI partition on your USB stick? It has to be in the correct place. Have you pressed F12 at boot up and booted from the USB stick?

Yes 

My EFI folder is in the EFI section of my USB stick
47 minutes ago, Locked Down said:

Ondan önyükleme yaptığınızda ne oluyor, ne gösteriyor? Bir ekran görüntüsü paylaşabilir misin?

There is no problem in booting the system. My problem is that I can only select the disk to install and then load the Big Sur or Catalina image to this disk.
2 minutes ago, seha39 said:

There is no problem in booting the system. My problem is that I can only select the disk to install and then load the Big Sur or Catalina image to this disk.

 

2 minutes ago, seha39 said:

There is no problem in booting the system. My problem is that I can only select the disk to install and then load the Big Sur or Catalina image to this disk.
Sistemin önyüklenmesinde de herhangi bir sorun yoktur. Benim sorunum kurulacak diski seçmek ve bu sorun nedeniyle Big Sur veya Catalina numarasını bu diske yüklememek.
3 minutes ago, seha39 said:

There is no problem in booting the system. My problem is that I can only select the disk to install and then load the Big Sur or Catalina image to this disk.

 


Sistemin önyüklenmesinde de herhangi bir sorun yoktur. Benim sorunum kurulacak diski seçmek ve bu sorun nedeniyle Big Sur veya Catalina numarasını bu diske yüklememek.

The booting of the system also does not have any problems. My problem is selecting the disk to be installed and not loading the Big Sur or Catalina number on this disk because of this problem

29 minutes ago, seha39 said:

There is no problem in booting the system. My problem is that I can only select the disk to install and then load the Big Sur or Catalina image to this disk.

 


Sistemin önyüklenmesinde de herhangi bir sorun yoktur. Benim sorunum kurulacak diski seçmek ve bu sorun nedeniyle Big Sur veya Catalina numarasını bu diske yüklememek.

The booting of the system also does not have any problems. My problem is selecting the disk to be installed and not loading the Big Sur or Catalina number on this disk because of this problem

 

Can you select the disk and format it? It must be GUID partition table and APFS format. Screenshots can help in trying to understand the problems you are having.

3 minutes ago, Locked Down said:

Clover yerine Opencore kullanmak çok daha iyidir. Bu konunun ilk sayfasındaki Opencore 0.6.6 EFI'yi indirin. Ayrıca BIOS'unuzda CFG Kilitli olmadığından emin olun.

CFG won't be locked out?
So it should be enabled.

EFI.rar

1 minute ago, seha39 said:

CFG kilitlenmeyecek mi?
Yani etkinleştirilmelidir.

EFI.rar 2,23 MB · 0 indirme

CFG won't lock?
So it will be disabled

3 minutes ago, seha39 said:

CFG won't be locked out?
So it should be enabled.

EFI.rar 2.23 MB · 0 downloads

CFG won't lock?
So it will be disabled

 

CFG must be UNLOCKED to use macOS so you use CFG Lock -> Disabled. There is a BIOS settings file on the first page. Download that and copy it to a USB stick. Boot into your BIOS and then load that settings file. That way you will know that all your BIOS settings are correct.

1 hour ago, Locked Down said:

 

CFG must be UNLOCKED to use macOS so you use CFG Lock -> Disabled. There is a BIOS settings file on the first page. Download that and copy it to a USB stick. Boot into your BIOS and then load that settings file. That way you will know that all your BIOS settings are correct.

unfortunately it didn't

I've always had trouble installing big sur or catalina on the selected disk.

Have you got another SSD you can try? I have heard of other people having difficulty installing macOS on Corsair MPxxx ssds. Some Samsung ssds are also a problem and need their firmware updated before installing macOS

10 minutes ago, Locked Down said:

Deneyebileceğiniz başka bir SSD var mı? Corsair MPxxx ssds üzerine macOS kurmakta zorluk çeken diğer insanları duydum. Bazı Samsung SSD'ler de bir sorundur ve macOS'u yüklemeden önce aygıt yazılımının güncellenmesi gerekir

Samsung 500GB 970 EVO NVMe M.2 SSD and Samsung 500GB 860 EVO SATA 3.0 (Okuma 550MB / Yazma 520MB) SSD

v2-90804_large.webp vv.webp

26 minutes ago, Locked Down said:

860 Evo iyi çalışıyor. 970 Evo'nun sorunları olabilir. Bilgisayarınızda Windows yüklüyse, üretici yazılımını en son sürüme güncellemek için Samsung Magician yazılımını çalıştırabilirsiniz.

How do I use Samsung Magician software to update the firmware to the latest version.

In Magician click on Drive Details on the left hand side. In the windows select the drive from the drop down list. It will then display the Firmware Version and either say that it is the latest or give you the option to update it.

8 minutes ago, Locked Down said:

Magician'da sol taraftaki Sürücü Ayrıntıları'na tıklayın. Pencerelerde, açılır listeden sürücüyü seçin. Daha sonra Donanım Yazılımı Sürümünü görüntüleyecek ve en son sürüm olduğunu söyleyecek veya size güncelleme seçeneği sunacaktır.

Kingston A400 SSDNow 240GB 500MB-350MB/s Sata3 2.5" SSD (SA400S37/240G) unfortunately it didn't happen

1 minute ago, seha39 said:

Kingston A400 SSDNow 240GB 500MB-350MB/s Sata3 2.5" SSD (SA400S37/240G) unfortunately it didn't happen

 

1 minute ago, seha39 said:

unfortunately it did not happen how much disk I tried I cannot install any of them.

 

×
×
  • Create New...