AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

[AudioGod]

Just now, Narpstar said:

Aha okay. Thanks for the info! I'm using https://www.amazon.com.au/dp/B07T9JD93Y?ref_=pe_2361882_295287342_301_E_DDE_dt_1

Yes it will help that card for sure,

here’s the link and use the same kexts as @pkdesign is using. 

 

https://github.com/acidanthera/BrcmPatchRAM

@Narpstar If that doesn’t work for you then send me your EFI and il double check it for you buddy.  

[Narpstar]

3 minutes ago, AudioGod said:

Yes it will help that card for sure,

here’s the link and use the same kexts as @pkdesign is using. 

 

https://github.com/acidanthera/BrcmPatchRAM

Splendid, thank you!! But this is lots of different files and I can't see any .kext files in there. I thought I was meant to just drag and drop the .kext files into my /EFI/CLOVER/kexts/Other folder?

 

EDIT: My bad - there ARE .kext files in there. But lots of them in lots of different folders. I don't know which one/s to use. Please help!

Edited May 13, 2020 by Narpstar

[AudioGod]

17 minutes ago, Narpstar said:

Splendid, thank you!! But this is lots of different files and I can't see any .kext files in there. I thought I was meant to just drag and drop the .kext files into my /EFI/CLOVER/kexts/Other folder?

use 

BrcmBluetoothInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM3.kext

and yes just plot them into EFI/CLOVER/kexts/Other, restart and away you go.

 

Also if your not already then make sure your using my latest EFI.

Edited May 13, 2020 by AudioGod

[Narpstar]

3 minutes ago, AudioGod said:

use 

BrcmBluetoothInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM3.kext

and yes just plot them into EFI/CLOVER/kexts/Other, restart and away you go.

 

Also if your not already then make sure your using my latest if for the week.

Thanks again! Sorry to be a pain - I can find plenty of files starting with BrcmFirmwareInjector, for example, but they all have various sequences of numbers / letters afterwards, eg. "BrcmFirmwareInjector_0a5c_22be.kext". Do I just use any of them, or do I need to select a particular one?

[WizeMan]

2 minutes ago, Narpstar said:

Thanks again! Sorry to be a pain - I can find plenty of files starting with BrcmFirmwareInjector, for example, but they all have various sequences of numbers / letters afterwards, eg. "BrcmFirmwareInjector_0a5c_22be.kext". Do I just use any of them, or do I need to select a particular one?

 

You need to download the RELEASE archive:

https://github.com/acidanthera/BrcmPatchRAM/releases/download/2.5.3/BrcmPatchRAM-2.5.3-RELEASE.zip

[AudioGod]

1 minute ago, WizeMan said:

 

You need to download the RELEASE archive:

https://github.com/acidanthera/BrcmPatchRAM/releases/download/2.5.3/BrcmPatchRAM-2.5.3-RELEASE.zip

I was just typing the exact same thing to him, thank you buddy 

[dsynos80]

Thnx for clarifying that. 

No i am not using latest EFI.

The one i have works as it should in osx and since i am still on 10.14 i only upgrading kexts n clover.

[AudioGod]

15 minutes ago, dsynos80 said:

Thnx for clarifying that. 

No i am not using latest EFI.

The one i have works as it should in osx and since i am still on 10.14 i only upgrading kexts n clover.

 

Ah yes sorry I keep forgetting your a Mojave user.  

Edited May 13, 2020 by AudioGod

[pkdesign]

 

Wow, I caused quite the stir. I was updating my post above.

 

And yes, those files should help you out. Functional the Fenvi card you have is the same as mine. Beware that you will probably lose any form of sleep though. Let me know if you don't.

 

There are some posts that say the Fenvi cards don't need AirportFix. You might want to try both ways. See this post: https://dortania.github.io/Wireless-Buyers-Guide/

Edited May 13, 2020 by pkdesign

[AudioGod]

5 minutes ago, pkdesign said:

 

Wow, I caused quite the stir. I was updating my post above.

 

And yes, those files should help you out. Functional the Fenvi card you have is the same as mine. Beware that you will probably lose any form of sleep those. Let me know if you don't.

 

There are some posts that say the Fenvi cards don't need AirportFix. You might want to try both ways. See this post: https://dortania.github.io/Wireless-Buyers-Guide/

I got him up and running without needing any of that. He’s good now buddy, All sorted 

[panosru]

Hello guys, I'm puzzled with a WiFi issue, although my WiFi card is detected by the system, I'm only able to login to unprotected WiFi. If it is protected, even if I use the correct password, I'm getting the screen to enter the WiFi password again with a "Connection failed" message on the bottom left.

 

I face the above issue with both: Tp-Link Archer T6E AC1300 and ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card For Hackintosh

 

I'm using the latest clover EFI posted in this thread, any idea?

 

Thanks!

[AudioGod]

18 minutes ago, panosru said:

Hello guys, I'm puzzled with a WiFi issue, although my WiFi card is detected by the system, I'm only able to login to unprotected WiFi. If it is protected, even if I use the correct password, I'm getting the screen to enter the WiFi password again with a "Connection failed" message on the bottom left.

 

I face the above issue with both: Tp-Link Archer T6E AC1300 and ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card For Hackintosh

 

I'm using the latest clover EFI posted in this thread, any idea?

 

Thanks!

That’s not a EFI problem by the sound of it it’s a OS problem.

have you tried switching the WiFi and bluetooth off and on again?

have you cleared your cache and rebuild permissions using hackintool?

also clear your nvram and see if it helps. (f11 at the bootpicker)

 

also try and use these kexts if none of the above works for you.

 

https://github.com/acidanthera/BrcmPatchRAM/releases

Use,

BrcmBluetoothInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM3.kext

from the package or BrcmPatchRAM2 instead of 3 for Mojave

Edited May 13, 2020 by AudioGod

[n19htz]

Every 10-15min hack wakes up with:
localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: RTC (Alarm)
can figure out how to stop it, I use darkwake=0, but it still wakes amd then goes sleep again, very annoying  Any gues how to deal with it?

[panosru]

@AudioGod

 

I did everything  you mentioned again, just to make sure, I still face the same behaviour :/ 

 

btw on clean kextcache and rebuild I got this at the end:

 

Kext with invalid signature (-67050) allowed: <OSKext 0x7f8b16814650 [0x7fff89eb98c0]> { URL = "file:///Library/Apple/System/Library/Extensions/AppleUSBEthernetHost.kext/", ID = "com.apple.macos.driver.AppleUSBEthernetHost" }

Kext with invalid signature (-67050) allowed: <OSKext 0x7f8b16814650 [0x7fff89eb98c0]> { URL = "file:///Library/Apple/System/Library/Extensions/AppleUSBEthernetHost.kext/", ID = "com.apple.macos.driver.AppleUSBEthernetHost" }

 

UPDATE:

The issue seems to be shown on 2.4GHz WiFi only, 5GHz works fine

 

Edited May 13, 2020 by panosru

[dsynos80]

4 hours ago, AudioGod said:

 

Ah yes sorry I keep forgetting your a Mojave user.  

As long as i can hehe. Flashaholicness ( as mobile users  say) is long past due. Usability is preferred.

[Tiem]

7 hours ago, panosru said:

Hello guys, I'm puzzled with a WiFi issue, although my WiFi card is detected by the system, I'm only able to login to unprotected WiFi. If it is protected, even if I use the correct password, I'm getting the screen to enter the WiFi password again with a "Connection failed" message on the bottom left.

 

I face the above issue with both: Tp-Link Archer T6E AC1300 and ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card For Hackintosh

 

I'm using the latest clover EFI posted in this thread, any idea?

 

Thanks!

Post your wifi info from system report.

[hansik]

Hi, I have a little problem, when windows make an update or sometimes, When I choose in clover boot loader the Macos partition who is in an other disk than windows one; I can have circle with cross. But when i restart one time or 2 times macos can start like normal. Do you know why. How win can influent my special M.2 macos when it is the first to boot ! Do I have to disable something on the Bios ?

Edited May 14, 2020 by hansik

[AudioGod]

3 minutes ago, hansik said:

Hi, I have a little problem, when windows make an update or sometimes, When I choose in clover boot loader the Macos partition who is in an other disk than windows one; I can have circle with cross. But when i restart one time or 2 times macos can start like normal. Do you know why. How win can influent my special M.2 macos when it is the first to boot ! Do I have to desable something on the Bios ?

 

No there's not a lot you can do at the moment to be honest, its just getting confused on the boot up now and again and failing to boot. (could be a lot worst as in the old day if that happened you would need to reset the bios to bring it back)

Clearing you Cmos via a battery removal can help saying that though.

[hansik]

2 minutes ago, AudioGod said:

 

Non, pour être honnête, il n'y a pas grand-chose que vous puissiez faire pour le moment, cela se confond de temps en temps avec le démarrage et ne parvient pas à démarrer. (pourrait être bien pire que dans le passé si cela se produisait, vous auriez besoin de réinitialiser le bios pour le ramener)

Vous effacer les Cmos via le retrait de la batterie peut aider à le dire.

Yep thx. Its not a problem for me I ask because I havent the problem when i am in 10.15.3. 

Edited May 14, 2020 by hansik

[AudioGod]

3 minutes ago, hansik said:

Yep thx. Its not a problem for me I ask because I havent the problem when i am in 10.15.3. 

 

Clear you bios by removing all power and the cmos battery and that will fix it I bet.

 

also just to add and looking at your system spec. a better solution for you would be to change your smbios over too iMacPro1,1 with the igpu disabled in the bios.

Your using a Radeon VII and that gets held back when your using 19,1 with the igpu enabled.

This will also fix the windows misboot as there's a lot more space in the tiny memory it can use to work in.

Edited May 14, 2020 by AudioGod

[hansik]

2 minutes ago, AudioGod said:

 

Clear you bios by removing all power and the cmos battery and that will fix it I bet.

 

also just to add and looking at your system spec. a better solution for you would be to change your smbios over too iMacPro1,1 with the igpu disabled in the bios.

Your using a Radeon VII and that gets held back when your using 19,1 with the igpu enabled.

This will also fix the windows misboot as there's a lot more space in the tiny memory it can use to work in.

Ok, I will try first clear bios. I was thinking igpu is used sometimes in render; It is compelty useless when you have a GPU ? 

[AudioGod]

1 minute ago, hansik said:

Ok, I will try first clear bios. I was thinking igpu is used sometimes in render; It is compelty useless when you have a GPU ? 

The Radeon VII will kick the igpu when it comes to rendering. It’s super powerful at that.

 

its the only gpu I would tell people to do that with tbh, all the other gpus  benefit from 19,1 

Edited May 14, 2020 by AudioGod

[hansik]

3 minutes ago, AudioGod said:

The Radeon VII will kick the igpu when it comes to rendering. It’s super powerful at that.

 

its the only gpu I would tell people to do that with tbh, all the other gpus  benefit from 19,1 

You right bro ! To much power, my chair is burning and I am righ now between the sky in the ocean surfing in this web. lol

[panosru]

On 5/14/2020 at 5:12 AM, Tiem said:

Post your wifi info from system report.

 

Sorry for the delay!

 

Software Versions:
  CoreWLAN:	13.0 ((null))
  CoreWLANKit:	13.0 ((null))
  Menu Extra:	13.0 ((null))
  System Information:	12.0 (1500)
  IO80211 Family:	12.0 (1200.12.2b1)
  Diagnostics:	1.0 (910)
  AirPort Utility:	Not Installed
  Interfaces:
en1:
  Card Type:	AirPort Extreme  (0x14E4, 0x117)
  Firmware Version:	Broadcom BCM43xx 1.0 (7.77.111.1 AirPortDriverBrcmNIC-1600.4)
  MAC Address:	30:35:ad:d6:66:fa
  Locale:	FCC
  Country Code:	US
  Supported PHY Modes:	802.11 a/b/g/n/ac
  Supported Channels:	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165
  AirDrop:	Supported
  AirDrop Channel:	149
  Auto Unlock:	Supported
  Status:	Not Associated

 

[Tiem]

On 5/15/2020 at 1:29 AM, panosru said:

 

Sorry for the delay!

 

Software Versions:
  CoreWLAN:	13.0 ((null))
  CoreWLANKit:	13.0 ((null))
  Menu Extra:	13.0 ((null))
  System Information:	12.0 (1500)
  IO80211 Family:	12.0 (1200.12.2b1)
  Diagnostics:	1.0 (910)
  AirPort Utility:	Not Installed
  Interfaces:
en1:
  Card Type:	AirPort Extreme  (0x14E4, 0x117)
  Firmware Version:	Broadcom BCM43xx 1.0 (7.77.111.1 AirPortDriverBrcmNIC-1600.4)
  MAC Address:	30:35:ad:d6:66:fa
  Locale:	FCC
  Country Code:	US
  Supported PHY Modes:	802.11 a/b/g/n/ac
  Supported Channels:	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165
  AirDrop:	Supported
  AirDrop Channel:	149
  Auto Unlock:	Supported
  Status:	Not Associated

 

You card isn't installed properly:

Status:	Not Associated

This should read:

Status:	Connected

 

This is often caused by a hardware fault. Could be the card isn't seated properly, or you may have something more systemic (maybe a bad board).

 

For reference (using the Fenvi T919):

 Interfaces:
en1:
  Card Type:	AirPort Extreme  (0x14E4, 0x111)
  Firmware Version:	Broadcom BCM43xx 1.0 (7.77.111.1 AirPortDriverBrcmNIC-1610.1)
  [...]
  Supported PHY Modes:	802.11 a/b/g/n/ac
  Supported Channels:	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165
  Wake On Wireless:	Supported
  AirDrop:	Supported
  AirDrop Channel:	149
  Auto Unlock:	Supported
  Status:	Connected

If you can test the card in another system or even maybe Windows (use the Apple BT and wifi drivers for the card). You will need to find a way to test your hardware.