igorw Posted September 24, 2019 Share Posted September 24, 2019 On 9/21/2019 at 4:44 AM, arsradu said: Hi guys, Anyone else having wake issues with RX cards and Catalina Beta 8? This used to work before. Now it just doesn't anymore. System goes to sleep just fine. But it just doesn't wake up graphics after sleep. Same config. Update: I disabled Inject Intel. Now it does wake up the screen, but can't move the mouse pointer, and keyboard seems to be stuck, as well. Everything is pretty much frozen. I feel this has to be related to the iGPU. And...after fiddling around with the ig-platform-id, I'm pretty sure that's the cause. Thing is...the same ig-platform-id (for headless connection) used to work before. I just don't know what to change now to make it work again... I have the exact same problem with my RX 560. The solution was to set the iGPU as primary in BIOS. Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691154 Share on other sites More sharing options...
arsradu Posted September 24, 2019 Share Posted September 24, 2019 20 minutes ago, igorw said: I have the exact same problem with my RX 560. The solution was to set the iGPU as primary in BIOS. Hi there! Thanks for your feedback! I did that too... Didn't seem to make a difference though... I think the issue is related to the iGPU. I just don't know how to fix it right now. Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691156 Share on other sites More sharing options...
chris1111 Posted September 24, 2019 Share Posted September 24, 2019 18 hours ago, Sherlocks said: how about rebuild kernel cache? 나의 SM-N960N 의 Tapatalk에서 보냄 Yes its Work now Good news for the Old Nvidia and Intel HD 3000 video card, the package Legacy video B9 Works with out using the Recovery HD but you have to complete a fresh Install of Beta 9 because update beta 8 to Beta 9 not working for the Legacy Video But its a great succeees annyway Big thanks to @ASentientBot 3 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691157 Share on other sites More sharing options...
arsradu Posted September 24, 2019 Share Posted September 24, 2019 (edited) @Andres ZeroCross I just finished downloading the installer, with no issues. So I'm guessing either something specific to your case, or something specific to the dev beta. I downloaded from Public Beta. I just thought you might wanna know. Edited September 24, 2019 by arsradu Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691158 Share on other sites More sharing options...
Andres ZeroCross Posted September 24, 2019 Share Posted September 24, 2019 17 minutes ago, arsradu said: @Andres ZeroCross I just finished downloading the installer, with no issues. So I'm guessing either something specific to your case, or something specific to the dev beta. I downloaded from Public Beta. I just thought you might wanna know. This is my third download. Very slow connection from Apple Server. My Internet Connections is 30Mbps 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691159 Share on other sites More sharing options...
devillived666 Posted September 24, 2019 Share Posted September 24, 2019 This is my third download. Very slow connection from Apple Server. My Internet Connections is 30MbpsI had the same issue and had to stop and restart numerous times. Took about forty minutes with a gigabyte connection. Sent from my Pixel 3 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691162 Share on other sites More sharing options...
arsradu Posted September 24, 2019 Share Posted September 24, 2019 (edited) @Andres ZeroCross Fixed it!! FINALLY!!!!!! I was right when I said this happens with any SMBIOS and the fact that, with the same config, it just stopped working at some point. But you were definitely right when you said Serial Ports! That option was enabled, and despite the fact that I don't remember giving much importance to that before with Catalina (when it worked), and despite the fact that, with the same option enabled, Mojave works just fine, THAT ACTUALLY FIXED IT! :))) So yeah, it was an option in the BIOS, it wasn't the config, it wasn't the SMBIOS, and it looks like it is something that might have been recently added to MacOS, since it didn't happen with previous versions of Catalina (though I might have disabled that option before, without realising how important that was), and it definitely didn't happen with Mojave. So yeah, to sum up: 1. SMBIOS change did nothing 2. fresh installation did nothing 3. setting the iGPU as primary, in my case at least, it didn't change anything. What did make the whole difference, and I honestly didn't expect it to make all that difference, since to me it looked like the problem is iGPU related...not..serial ports related...was disabling Serial Ports in BIOS. So yeah, a HUGE thank you to everyone for their feedback on this issue. You guys are awesome! Edited September 24, 2019 by arsradu 4 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691189 Share on other sites More sharing options...
Andres ZeroCross Posted September 24, 2019 Share Posted September 24, 2019 20 minutes ago, arsradu said: @Andres ZeroCross Fixed it!! FINALLY!!!!!! I was right when I said this happens with any SMBIOS and the fact that, with the same config, it just stopped working at some point. But you were definitely right when you said Serial Ports! That option was enabled, and despite the fact that I don't remember giving much importance to that before with Catalina (when it worked), and despite the fact that, with the same option enabled, Mojave works just fine, THAT ACTUALLY FIXED IT! :))) So yeah, it was an option in the BIOS, it wasn't the config, it wasn't the SMBIOS, and it looks like it is something that might have been recently added to MacOS, since it didn't happen with previous versions of Catalina (though I might have disabled that option before, without realising how important that was), and it definitely didn't happen with Mojave. So yeah, to sum up: 1. SMBIOS change did nothing 2. fresh installation did nothing 3. setting the iGPU as primary, in my case at least, it didn't change anything. What did make the whole difference, and I honestly didn't expect it to make all that difference, since to me it looked like the problem is iGPU related...not..serial ports related...was disabling Serial Ports in BIOS. So yeah, a HUGE thank you to everyone for their feedback on this issue. You guys are awesome! i have fixed other PC hackintosh in my country with same issue like yours. He is using Haswell Platform + RX 560. Same issue about wake from sleep,, serial port = disable is the key. So i just give solution based on experience. Honestly i try to tracking this device in IOREG / DSDT and try to disable it from DSDT (let serial enable in BIOS), but somehow still can make wake issue. So the best solution for now is disable from bios only. Until we know what device of SERIAL in IOREG / DSDT 3 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691191 Share on other sites More sharing options...
Andres ZeroCross Posted September 24, 2019 Share Posted September 24, 2019 2 minutes ago, Ellybz said: Andres ZeroCross @Andres ZeroCross Airdrop works with BRCM4360 works because it's present in the IO80211 family kext. My question was related to those with BRCM4331 that has to be re injected. Thanks for your input Your first line questions above is about "Anybody has an issue with Beta 9 & airdrop not showing? (19A573a)", you didn't write BCM4331 as main issue in your first questions. So i give answer about your Main Questions PS : AFAIK Airdrop is about Bluetooth, not wifi kext 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691193 Share on other sites More sharing options...
Ellybz Posted September 24, 2019 Share Posted September 24, 2019 (edited) 7 minutes ago, Andres ZeroCross said: Your first line questions above is about "Anybody has an issue with Beta 9 & airdrop not showing? (19A573a)", you didn't write BCM4331 as main issue in your first questions. So i give answer about your Main Questions PS : AFAIK Airdrop is about Bluetooth, not wifi kext Yes I did, I wrote" Can anyone report their status with a BRCM4331 Card? Thanks." No big deal. thanks anyway . AFAIK, Airdrop needs WIFI to be turned on, but it does not need to be connected to a network. Edited September 24, 2019 by Ellybz 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691194 Share on other sites More sharing options...
Ellybz Posted September 24, 2019 Share Posted September 24, 2019 (edited) @arsradu I mentioned overheating CPU & bios settings because after reading your report, NMIPI seemed related to your crashes/ freezes. This often relates to overheating issues. I'm glad you resolved your pb ( with the valuable help of @Andres ZeroCross ). Edited September 24, 2019 by Ellybz 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691200 Share on other sites More sharing options...
arsradu Posted September 24, 2019 Share Posted September 24, 2019 (edited) 18 minutes ago, Ellybz said: @arsradu I mentioned overheating CPU & bios settings because after reading your report, NMPI seemed related to your crashed/ freezes. This often relates to overheating issues. I'm glad you resolved your pb ( with the valuable help of @Andres ZeroCross ). Looks like we were both wrong here. :)) You thought it's CPU overheating, turned out it wasn't. I thought it was iGPU related, turned out it wasn't. :))) Anyway, I'm aware of the fact that this is a simple community of really beautiful people willing to help. I always keep in mind that nobody's perfect, we all make mistakes, anyone of us can be wrong, and I definitely don't expect anyone to come up with the ultimate solution to all of the world's problems. Believe me, there is no such thing. :))) So I do appreciate every bit of help I can get, and I thank you guys very much for being the awesome human beings that you are. Edited September 24, 2019 by arsradu 2 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691205 Share on other sites More sharing options...
anonymous writer Posted September 24, 2019 Share Posted September 24, 2019 1 hour ago, arsradu said: @Andres ZeroCross Fixed it!! FINALLY!!!!!! But you were definitely right when you said Serial Ports! That option was enabled, and despite the fact that I don't remember giving much importance to that before with Catalina (when it worked), and despite the fact that, with the same option enabled, Mojave works just fine, THAT ACTUALLY FIXED IT! :))) Thank you very much for this info. Also works for me on my desktop. Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691207 Share on other sites More sharing options...
Alexey Boronenkov Posted September 24, 2019 Share Posted September 24, 2019 Oh,yes!)))) Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691214 Share on other sites More sharing options...
Riley Freeman Posted September 25, 2019 Share Posted September 25, 2019 (edited) Figured it out. Renamed EC0 via a Clover patch instead of through DSDT (where I had to rename a stack of matching entries to get the DSDT to compile). Did anyone else lose their battery info in System Profiler after renaming EC0 to EC? I couldn't install the latest Catalina build until I did this and now my charge and cycle count values show "-1". This is in Sierra and Catalina. Rolling back my previous DSDT with EC0 untouched fixes the problem, but breaks Catalina. I'm using VoodooBatterySMC from the latest HWSensors from Slice (r241). Edited September 25, 2019 by Riley Freeman Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691227 Share on other sites More sharing options...
xiaoM4095 Posted September 25, 2019 Share Posted September 25, 2019 8 hours ago, arsradu said: @Andres ZeroCross Fixed it!! FINALLY!!!!!! I was right when I said this happens with any SMBIOS and the fact that, with the same config, it just stopped working at some point. But you were definitely right when you said Serial Ports! That option was enabled, and despite the fact that I don't remember giving much importance to that before with Catalina (when it worked), and despite the fact that, with the same option enabled, Mojave works just fine, THAT ACTUALLY FIXED IT! :))) So yeah, it was an option in the BIOS, it wasn't the config, it wasn't the SMBIOS, and it looks like it is something that might have been recently added to MacOS, since it didn't happen with previous versions of Catalina (though I might have disabled that option before, without realising how important that was), and it definitely didn't happen with Mojave. So yeah, to sum up: 1. SMBIOS change did nothing 2. fresh installation did nothing 3. setting the iGPU as primary, in my case at least, it didn't change anything. What did make the whole difference, and I honestly didn't expect it to make all that difference, since to me it looked like the problem is iGPU related...not..serial ports related...was disabling Serial Ports in BIOS. So yeah, a HUGE thank you to everyone for their feedback on this issue. You guys are awesome! Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings? Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691229 Share on other sites More sharing options...
arsradu Posted September 25, 2019 Share Posted September 25, 2019 (edited) 7 hours ago, xiaoM4095 said: Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings? I'm not sure laptops have that option. So...I think in your case, the source of the issue might be different...? Do you get KP? If so, can you post the report you get after reboot? It might be different. I think your issue might actually be related to the iGPU. Unless your experience says otherwise. Anyway, this is for my desktop motherboard (and probably other desktop motherboards, as well). Similar naming. Edited September 25, 2019 by arsradu 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691234 Share on other sites More sharing options...
Andres ZeroCross Posted September 25, 2019 Share Posted September 25, 2019 3 hours ago, xiaoM4095 said: Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings? Set hibernatemode 0 for your Pmset,, And write detail your problem. 4 hours ago, Riley Freeman said: Figured it out. Renamed EC0 via a Clover patch instead of through DSDT (where I had to rename a stack of matching entries to get the DSDT to compile). Did anyone else lose their battery info in System Profiler after renaming EC0 to EC? I couldn't install the latest Catalina build until I did this and now my charge and cycle count values show "-1". This is in Sierra and Catalina. Rolling back my previous DSDT with EC0 untouched fixes the problem, but breaks Catalina. I'm using VoodooBatterySMC from the latest HWSensors from Slice (r241). You can't just rename EC0 to EC in DSDT only,, some SSDT OEM have EC0 in their code. This will trouble you. So Rename EC0 to EC in config.plist is best solution (clover will rename all EC0 to EC in DSDT and SSDT OEM) 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691236 Share on other sites More sharing options...
Riley Freeman Posted September 25, 2019 Share Posted September 25, 2019 I've noticed one difference here between Sierra and Catalina with the Clover EC0 rename patch. When I renamed EC0 in the DSDT AppleBusPowerControllerUSB showed up under the renamed EC in both systems. Now with the Clover patch it only shows up in Sierra, not Catalina. Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691254 Share on other sites More sharing options...
fangf2018 Posted September 25, 2019 Share Posted September 25, 2019 Installation can't go in Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691263 Share on other sites More sharing options...
xiaoM4095 Posted September 25, 2019 Share Posted September 25, 2019 6 hours ago, arsradu said: I'm not sure laptops have that option. So...I think in your case, the source of the issue might be different...? Do you get KP? If so, can you post the report you get after reboot? It might be different. I think your issue might actually be related to the iGPU. Unless your experience says otherwise. Anyway, this is for my desktop motherboard (and probably other desktop motherboards, as well). Similar naming. 5 hours ago, Andres ZeroCross said: Set hibernatemode 0 for your Pmset,, And write detail your problem. You can't just rename EC0 to EC in DSDT only,, some SSDT OEM have EC0 in their code. This will trouble you. So Rename EC0 to EC in config.plist is best solution (clover will rename all EC0 to EC in DSDT and SSDT OEM) I found the option you mentioned in the BIOS, but it has been disabled. Attach my panic report. Anonymous UUID: 73E46EBA-13F5-C21A-BD7C-53473ED43527 Wed Sep 25 20:15:07 2019 *** Panic Report *** Panic(CPU 2, time 57052043059): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0 RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff800b059cdf, RDX: 0xffffff800b059f74 RSP: 0xffffff811e7b3490, RBP: 0xffffff811e7b3500, RSI: 0xfffffe897e036014, RDI: 0x00000000fe036014 R8: 0x0000000000000000, R9: 0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000 R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000 RFL: 0x0000000000000087, RIP: 0xffffff800b059cf9, CS: 0x0000000000000008, SS: 0x0000000000000010 Backtrace (CPU 2), Frame : Return Address 0xffffff811f085f80 : 0xffffff800b065d7b mach_kernel : _interrupt + 0x12b 0xffffff811f085fd0 : 0xffffff800aee4d5d mach_kernel : _hndl_allintrs + 0x11d 0xffffff811e7b3500 : 0xffffff800b6ad2c9 mach_kernel : _serial_init + 0x679 0xffffff811e7b3510 : 0xffffff800b031b4a mach_kernel : _console_printbuf_clear + 0x7a 0xffffff811e7b3530 : 0xffffff800b031f39 mach_kernel : _cnputc_unbuffered + 0xe9 0xffffff811e7b3560 : 0xffffff800b032366 mach_kernel : _console_write + 0x296 0xffffff811e7b35a0 : 0xffffff800b031ab8 mach_kernel : _console_printbuf_putc + 0x68 0xffffff811e7b35c0 : 0xffffff800af5515f mach_kernel : ___doprnt + 0x9f 0xffffff811e7b36a0 : 0xffffff800b6044b1 mach_kernel : _IOLog + 0x131 0xffffff811e7b3850 : 0xffffff7f8f3e8fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b 0xffffff811e7b38b0 : 0xffffff7f8ea13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399 0xffffff811e7b3980 : 0xffffff7f8f3ebdfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4 0xffffff811e7b39c0 : 0xffffff7f8ea1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135 0xffffff811e7b3a50 : 0xffffff7f8f3e8e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4 0xffffff811e7b3ab0 : 0xffffff7f8f3d8aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e 0xffffff811e7b3b10 : 0xffffff7f8f3e885d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf 0xffffff811e7b3b30 : 0xffffff7f8ea091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111 0xffffff811e7b3b70 : 0xffffff7f8ea09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65 0xffffff811e7b3bb0 : 0xffffff7f8f3cc80b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9 0xffffff811e7b3bf0 : 0xffffff7f8f3cd200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe 0xffffff811e7b3c30 : 0xffffff7f8f3c7a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316 0xffffff811e7b3c80 : 0xffffff800b63f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138 0xffffff811e7b3ce0 : 0xffffff7f8f3c7756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c 0xffffff811e7b3d00 : 0xffffff7f8ea06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e 0xffffff811e7b3d40 : 0xffffff7f8f3c95a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180 0xffffff811e7b3ed0 : 0xffffff7f8f3c9254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc 0xffffff811e7b3f40 : 0xffffff800b63c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e 0xffffff811e7b3f80 : 0xffffff7f8f3c9132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58 0xffffff811e7b3fa0 : 0xffffff800aee413e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000->0xffffff7f8ea40fff dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f8e956000 com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f8f3b8000->0xffffff7f8f4a0fff dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f8f212000 dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f8ee71000 dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000 dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f8f206000 dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8ee21000 dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f8f278000 BSD process name corresponding to current thread: kernel_task Boot args: dart=0 -v debug=0x100 keepsyms=1 root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg Mac OS version: 19A526h Kernel version: Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64 Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3 Kernel slide: 0x000000000ac00000 Kernel text base: 0xffffff800ae00000 __HIB text base: 0xffffff800ad00000 System model name: MacBookPro15,1 (Mac-937A206F2EE63C01) System shutdown begun: NO Panic diags file unavailable, panic occurred prior to initialization System uptime in nanoseconds: 57052522620 last loaded kext at 54468665790: com.apple.driver.AppleGraphicsDevicePolicy 4.1.30 (addr 0xffffff7f8f5ef000, size 86016) loaded kexts: (none) panic(cpu 6 caller 0xffffff800b041eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57052041087, pre-NMIPI time: 0xd4891107c, current: 0xd48986ea4, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909 Backtrace (CPU 6), Frame : Return Address 0xffffff811ea73680 : 0xffffff800af3da1b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff811ea736d0 : 0xffffff800b074aa5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff811ea73710 : 0xffffff800b06658b mach_kernel : _kernel_trap + 0x4fb 0xffffff811ea73760 : 0xffffff800aee4bb0 mach_kernel : _return_from_trap + 0xe0 0xffffff811ea73780 : 0xffffff800af3d107 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff811ea73880 : 0xffffff800af3d4eb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff811ea738d0 : 0xffffff800b6cd559 mach_kernel : _panic + 0x61 0xffffff811ea73940 : 0xffffff800b041eb1 mach_kernel : _pmap_flush_tlbs + 0x841 0xffffff811ea739f0 : 0xffffff800b047afa mach_kernel : _pmap_remove_range_options + 0x36a 0xffffff811ea73ad0 : 0xffffff800b0487a6 mach_kernel : _pmap_remove_options + 0x96 0xffffff811ea73b30 : 0xffffff800afd54cb mach_kernel : _vm_map_destroy + 0x8eb 0xffffff811ea73c80 : 0xffffff800afdce1e mach_kernel : _vm_map_remove + 0x5e 0xffffff811ea73cb0 : 0xffffff800afd0766 mach_kernel : _kmem_free + 0x86 0xffffff811ea73ce0 : 0xffffff800b5c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f 0xffffff811ea73d00 : 0xffffff800b66bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb 0xffffff811ea73d60 : 0xffffff800b025be4 mach_kernel : _iokit_server_routine + 0x6464 0xffffff811ea73db0 : 0xffffff800af43888 mach_kernel : _ipc_kobject_server + 0x238 0xffffff811ea73e10 : 0xffffff800af1a725 mach_kernel : _ipc_kmsg_send + 0x135 0xffffff811ea73e70 : 0xffffff800af31135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5 0xffffff811ea73f00 : 0xffffff800b04ca65 mach_kernel : _mach_call_munger64 + 0x205 0xffffff811ea73fa0 : 0xffffff800aee5396 mach_kernel : _hndl_mach_scall64 + 0x16 BSD process name corresponding to current thread: WindowServer EOF Model: MacBookPro15,1, BootROM 220.260.170.0.0, 4 processors, Intel Core i5, 2.30 GHz, 8 GB, SMC 1.74f4 Graphics: kHW_IntelUHDGraphics630Item, Intel UHD Graphics 630, Built-In Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2667 MHz, SK Hynix, HMA81GS6CJR8N-VK AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x133), Broadcom BCM43xx 1.0 (7.77.37.31.1a9) Bluetooth: Version 6.0.7f10, 3 services, 18 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: KINGSTON SA400S37480G, 480.1 GB USB Device: USB 3.1 Bus USB Device: DataTraveler 3.0 USB Device: Bluetooth USB Host Controller USB Device: Integrated Camera Thunderbolt Bus: Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691264 Share on other sites More sharing options...
arsradu Posted September 25, 2019 Share Posted September 25, 2019 (edited) 41 minutes ago, xiaoM4095 said: I found the option you mentioned in the BIOS, but it has been disabled. Attach my panic report. Anonymous UUID: 73E46EBA-13F5-C21A-BD7C-53473ED43527 Wed Sep 25 20:15:07 2019 *** Panic Report *** Panic(CPU 2, time 57052043059): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0 RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff800b059cdf, RDX: 0xffffff800b059f74 RSP: 0xffffff811e7b3490, RBP: 0xffffff811e7b3500, RSI: 0xfffffe897e036014, RDI: 0x00000000fe036014 R8: 0x0000000000000000, R9: 0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000 R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000 RFL: 0x0000000000000087, RIP: 0xffffff800b059cf9, CS: 0x0000000000000008, SS: 0x0000000000000010 Backtrace (CPU 2), Frame : Return Address 0xffffff811f085f80 : 0xffffff800b065d7b mach_kernel : _interrupt + 0x12b 0xffffff811f085fd0 : 0xffffff800aee4d5d mach_kernel : _hndl_allintrs + 0x11d 0xffffff811e7b3500 : 0xffffff800b6ad2c9 mach_kernel : _serial_init + 0x679 0xffffff811e7b3510 : 0xffffff800b031b4a mach_kernel : _console_printbuf_clear + 0x7a 0xffffff811e7b3530 : 0xffffff800b031f39 mach_kernel : _cnputc_unbuffered + 0xe9 0xffffff811e7b3560 : 0xffffff800b032366 mach_kernel : _console_write + 0x296 0xffffff811e7b35a0 : 0xffffff800b031ab8 mach_kernel : _console_printbuf_putc + 0x68 0xffffff811e7b35c0 : 0xffffff800af5515f mach_kernel : ___doprnt + 0x9f 0xffffff811e7b36a0 : 0xffffff800b6044b1 mach_kernel : _IOLog + 0x131 0xffffff811e7b3850 : 0xffffff7f8f3e8fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b 0xffffff811e7b38b0 : 0xffffff7f8ea13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399 0xffffff811e7b3980 : 0xffffff7f8f3ebdfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4 0xffffff811e7b39c0 : 0xffffff7f8ea1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135 0xffffff811e7b3a50 : 0xffffff7f8f3e8e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4 0xffffff811e7b3ab0 : 0xffffff7f8f3d8aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e 0xffffff811e7b3b10 : 0xffffff7f8f3e885d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf 0xffffff811e7b3b30 : 0xffffff7f8ea091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111 0xffffff811e7b3b70 : 0xffffff7f8ea09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65 0xffffff811e7b3bb0 : 0xffffff7f8f3cc80b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9 0xffffff811e7b3bf0 : 0xffffff7f8f3cd200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe 0xffffff811e7b3c30 : 0xffffff7f8f3c7a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316 0xffffff811e7b3c80 : 0xffffff800b63f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138 0xffffff811e7b3ce0 : 0xffffff7f8f3c7756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c 0xffffff811e7b3d00 : 0xffffff7f8ea06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e 0xffffff811e7b3d40 : 0xffffff7f8f3c95a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180 0xffffff811e7b3ed0 : 0xffffff7f8f3c9254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc 0xffffff811e7b3f40 : 0xffffff800b63c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e 0xffffff811e7b3f80 : 0xffffff7f8f3c9132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58 0xffffff811e7b3fa0 : 0xffffff800aee413e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000->0xffffff7f8ea40fff dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f8e956000 com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f8f3b8000->0xffffff7f8f4a0fff dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f8f212000 dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f8ee71000 dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000 dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f8f206000 dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8ee21000 dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f8f278000 BSD process name corresponding to current thread: kernel_task Boot args: dart=0 -v debug=0x100 keepsyms=1 root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg Mac OS version: 19A526h Kernel version: Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64 Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3 Kernel slide: 0x000000000ac00000 Kernel text base: 0xffffff800ae00000 __HIB text base: 0xffffff800ad00000 System model name: MacBookPro15,1 (Mac-937A206F2EE63C01) System shutdown begun: NO Panic diags file unavailable, panic occurred prior to initialization System uptime in nanoseconds: 57052522620 last loaded kext at 54468665790: com.apple.driver.AppleGraphicsDevicePolicy 4.1.30 (addr 0xffffff7f8f5ef000, size 86016) loaded kexts: (none) panic(cpu 6 caller 0xffffff800b041eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57052041087, pre-NMIPI time: 0xd4891107c, current: 0xd48986ea4, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909 Backtrace (CPU 6), Frame : Return Address 0xffffff811ea73680 : 0xffffff800af3da1b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff811ea736d0 : 0xffffff800b074aa5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff811ea73710 : 0xffffff800b06658b mach_kernel : _kernel_trap + 0x4fb 0xffffff811ea73760 : 0xffffff800aee4bb0 mach_kernel : _return_from_trap + 0xe0 0xffffff811ea73780 : 0xffffff800af3d107 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff811ea73880 : 0xffffff800af3d4eb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff811ea738d0 : 0xffffff800b6cd559 mach_kernel : _panic + 0x61 0xffffff811ea73940 : 0xffffff800b041eb1 mach_kernel : _pmap_flush_tlbs + 0x841 0xffffff811ea739f0 : 0xffffff800b047afa mach_kernel : _pmap_remove_range_options + 0x36a 0xffffff811ea73ad0 : 0xffffff800b0487a6 mach_kernel : _pmap_remove_options + 0x96 0xffffff811ea73b30 : 0xffffff800afd54cb mach_kernel : _vm_map_destroy + 0x8eb 0xffffff811ea73c80 : 0xffffff800afdce1e mach_kernel : _vm_map_remove + 0x5e 0xffffff811ea73cb0 : 0xffffff800afd0766 mach_kernel : _kmem_free + 0x86 0xffffff811ea73ce0 : 0xffffff800b5c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f 0xffffff811ea73d00 : 0xffffff800b66bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb 0xffffff811ea73d60 : 0xffffff800b025be4 mach_kernel : _iokit_server_routine + 0x6464 0xffffff811ea73db0 : 0xffffff800af43888 mach_kernel : _ipc_kobject_server + 0x238 0xffffff811ea73e10 : 0xffffff800af1a725 mach_kernel : _ipc_kmsg_send + 0x135 0xffffff811ea73e70 : 0xffffff800af31135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5 0xffffff811ea73f00 : 0xffffff800b04ca65 mach_kernel : _mach_call_munger64 + 0x205 0xffffff811ea73fa0 : 0xffffff800aee5396 mach_kernel : _hndl_mach_scall64 + 0x16 BSD process name corresponding to current thread: WindowServer EOF Model: MacBookPro15,1, BootROM 220.260.170.0.0, 4 processors, Intel Core i5, 2.30 GHz, 8 GB, SMC 1.74f4 Graphics: kHW_IntelUHDGraphics630Item, Intel UHD Graphics 630, Built-In Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2667 MHz, SK Hynix, HMA81GS6CJR8N-VK AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x133), Broadcom BCM43xx 1.0 (7.77.37.31.1a9) Bluetooth: Version 6.0.7f10, 3 services, 18 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: KINGSTON SA400S37480G, 480.1 GB USB Device: USB 3.1 Bus USB Device: DataTraveler 3.0 USB Device: Bluetooth USB Host Controller USB Device: Integrated Camera Thunderbolt Bus: Is this standard? Cause I've seen it before. And I just don't see the point for root-dmg.... Is this something specific to Laptops in general? Boot args: dart=0 -v debug=0x100 keepsyms=1 root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg Anyway, which ig-platform-id are you using with your config? Would you be able to clean the serials form your SMBIOS and post your config? I feel like there might be something wrong there. Or something that could be fixed from there. Edited September 25, 2019 by arsradu 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691269 Share on other sites More sharing options...
SavageAUS Posted September 25, 2019 Share Posted September 25, 2019 I've noticed one difference here between Sierra and Catalina with the Clover EC0 rename patch. When I renamed EC0 in the DSDT AppleBusPowerControllerUSB showed up under the renamed EC in both systems. Now with the Clover patch it only shows up in Sierra, not Catalina.I am using a fake ec device (Z170x) and am having the same issue, no more AppleBusPowerControllerUSB in ioreg on Catalina. I haven’t tested other versions of macOS as I’m only running 10.15. The EC device is in ioreg it’s just missing its entry for AppleBusPowerControllerUSB. Sent from my iPhone using Tapatalk 1 Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691274 Share on other sites More sharing options...
Konami® Posted September 25, 2019 Share Posted September 25, 2019 apologize if I am in the wrong area here but can anyone tell me if there is any patch for MacPro 2010 in OS X catalina? Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691278 Share on other sites More sharing options...
Matgen84 Posted September 25, 2019 Share Posted September 25, 2019 5 minutes ago, Konami® said: apologize if I am in the wrong area here but can anyone tell me if there is any patch for MacPro 2010 in OS X catalina? Real MacPro 2010 or Hackintosh? Can you complete your signature, please Link to comment https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/page/61/#findComment-2691279 Share on other sites More sharing options...
Recommended Posts